My third HP7500A all in one printer now and having the same problem: 0xc19a003. What to do?

Similar Questions

• HP Photosmart 3110 all-in-One Printer Scanner and install the HP for Windows 7 Solution Center

  Hello

  I have a printer HP Photosmart 3110 All in one with Windows XP. I bought a new computer with Windows 7. I plugged my printer HP to Win7 and now scan does not work. I need your help to install the HP Solution Center and make it work under Win7.

  There is not a download for Windows 7 on this printer. It is the only way for you to scan through paint. You will also be able to get the center of solutions is due to any software.

  THX

• How can I find the latest driver for my Canon MX310 all-in-one printer after "redevelopment" of the new Mac OS (El Capitan)?

  How can I find the latest driver for my Canon MX310 all-in-one printer after "redevelopment" of the new Mac OS (El Capitan)?

  Have you looked at the site of Canon?

• I have HP Deskjet 3050 a all-in-One Printer - J611g and need help with printing, please?

  I just bought the HP Deskjet 3050 all-in-one printer-J611g a. The manual has shown to do the printer double-sided printing odd pages then only print even pages only, and it works very well for one page on one side of the sheet. However, when I want to print two pages on one side of the paper and another of two pages on another aspect of the sheet, print the odd pages or even pages only just does not work! Ditto to print more than one PowerPoint presentation on one side of the page, if I click on print the odd pages only, then the printer will display the odd number of powerpoint slide instead of print odd number. I used to have another printer HP Officejet and never had any problems with two-sided printing. This printer comes with the function double-sided printeing at all?  If so, how can I do duplex printing?

  Thank you very much!

  This is a limitation of the software that you use and how the HP printers recognize the incoming files. When compress you multiple pages on a single "page" this page is actually two pages, with even and odd numbers. It is therefore difficult for the software to determine the page numbers 'odd' and 'even' when printing, because it is no longer applicable to the relevant pages, but the format in which they are being printed.

  I hope this information is useful!

• After that I went to El Capitan, my computer would be close and take forever to reboot.  I took it to the Genuis Bar and they said it was us who extinguished the FileVault.  I've updated the software on 1: 1 and now, I'm having the same problem

  After that I went to El Capitan, my computer would be close and take forever to reboot.  I took it to the Genuis Bar and they said it was us who extinguished the FileVault.  I've updated the software on 1: 1 and now, I'm having the same problem again.  The computer turns off and sometimes it takes me an hour or two to get started again.  Help, please!

  refer to this article and move forward with the NVRAM reset at the end.

  Reset the management system (SCM) controller on your Mac - Apple Support

  If the problem persists, how long have you made it Go?

  I would bring out there, but first call Apple.

• The printer indicates that online, my laptop said that it is in offline mode, I've deleted and reinstalled the printer and still the same problem,

  The printer indicates that online, my laptop said that it is in offline mode, I've deleted and reinstalled the printer and still the same problem, please help

  You are not quite correct.  Some newer wireless printers have only a wireless connection.  No USB port and a standard Ethernet cable port.

• I am a trial user now, but I need to re - download the apps that I use daily. I'll buy the creative cloud now, I have the same problem again.

  I am a trial user now, but I need to re - download the apps that I use daily. I'll buy the creative cloud now, I have the same problem again.

  It says error 16; Please visit: Configuration error. CC, CS

• 4380 all-in-one printer does not detect the print cartridge

  My all-in-one printer (model 4380 vivera, bought in Switzerland) does not detect the print cartridges. I traded the color cartridge with that of another, older than I was and now everything is fine. I don't know when, this problem will arise again. The last time I was so frustrated that I bought another printer (HP 2050) which seems to work without problems. I have unplugged, replugged and clean the cartridges with filtered water. The problem may arise at any time. Help, please. Thank you.

  I'm sorry you have a problem with your ink not detected.

  The problem may be because the printer is of the Switzerland and the ink cartridges are NOT. The printer will only accept cartridges of the same region/country.

  For example, if you are in the United States and buy a printer and the cartridges come from GERMANY, he cannot read. Will suit most, but some of the contacts are different causing not well read the cartridge from the printer.

• HP ENVY 7640 all-in-one: print envelopes and its telling me to load paper into the photo tray

  I am trying to print envelopes on the HP ENVY 7640 printer and it tells me to load paper into the photo tray. Have you encountered this problem and how to solve? Thank you.

  Hey @cmm3,

  Welcome to the Forums of HP Support!

  I understand that you have a problem when printing envelopes from your Windows 7 computer to your HP ENVY 7640 e-all-in-one printer. I would like to help you today with correct this print error "Photo tray". To start I have to make sure that the envelope is correctly loaded in your troubleshooting paper tray. Once you have confirmed that your envelope is loaded OK we'll take a look at the envelope to print on your computer settings. Can I please you follow the steps below.

  Step 1: Load the paper:

  To begin troubleshooting, please click here. Once the support document opens, please select the drop down list for "load envelopes. Please see the instructions on the screen to ensure that your envelope is correctly loaded in the paper tray. Once you have confirmed that your envelope is loaded correctly, proceed to the next step.

  Step 2: Check the print settings:

  Below I will provide you with instructions for printing envelopes per word. You should use a different program on your computer to print envelopes, please respond to this post with the program that you are using so I can provide specific measures.

  1. Open Word and click mail merge to top
  2. Select "envelopes" in the upper left side
  3. A page of envelopes and labels should now open. Enter your delivery and return address.
  4. Select 'Options' on the lower right
  5. Under the tab 'Options for envelopes' to ensure that your envelope is correctly selected.
  6. Select the 'Print Options' tab at the top. You must now select as appropriate feeding method for your product.
  7. Make sure that you choose the option "Face down".
  8. Also ensure that 'right-hand Rotation' is selected
  9. At the bottom of the window, select the drop-down list of pet food
  10. Make sure that the feeding method is set to main tray rather then select automatically
  11. Press 'OK' and 'Print'.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• 5740 HP e-all-in-one printer: how to change the destination for the scans folder

  I bought a HP Officejet 5740 e-all-in-one printer I connected wireless to a Win 7 PC. A month later, I added a new win 10 PC in my network (LAN), and I also installed the printer on this new PC. When I went to scan a document using the HP (NO Windows Fax and Scan) print software, the printer asked me which PC to scan to, and I chose the old Win 7 PC. The scanned image went to the folder My Documents\My scans of Win 7 PC, as expected.

  Two questions, both assuming I want to use the HP software to scan:

  1. is there a way to set a default value of PC to the computer target for digital images?

  2. How can I change the folder to which scaned images are sent?

  What are the answers to these two Qs if I decide to use Windows Fax and Scan instead of the printer software?

  Any help would be appreciated.

  Roy

  Hi Roy,

  Yes, you get a more integrated experience if you install the vs HP software by using the Add method of the printer.   And Yes, you should be able to do much more PC software rather than on the front panel of the unit.    And Yes, the aspect analysis software PC is much better than the Windows Fax & Scan.   Windows Fax Scan & gives a good experience of the box and is sufficient for many, but for those who want to do more, such a framing auto, rotate, reorder pages, etc... the HP scanning software is much better.

  I forgot what version of HP comes with your OJ5740 scanning, but we she recently rejected a new more complete solution that comes with the version that installs for your device recommended.   Here is a link where you can get that below.   I recommend you to install the latest web downloadable full version for your device first.   Then install this

  HP extended Scan

  FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi for Windows.

  You'll then have two versions, one called "HP Scan" and the other called "HP Scan extended.   If you find that "HP Scan" looks like 'HP Scan expanded', while the product was the version latest (we drove to this new version about 2 years ago).

• HP All in One printer will communicate with the computer.

  Original title: HP PHOTOSMART ALL IN ONE PRINTER C4480

  MY COMPUTOR KEEPS TELLING ME IT IS THERE HAS NO COMMUNICATION WITH MY PRINTER, I TRIED TO DOWNLOAD AND INSTALL FROM THE NETWORK DRIVER INSTRUCTIONS TO FIX THIS PROBLEM WITH NO NO SUCSESS I SHOULD THROW THIS PRINTER AND BUY ANOTHER

  Hello

  ·        What operating system is installed on your computer?

  ·        What is the exact error message that you receive?

  I suggest that you follow the steps in the link and check if that helps:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  You can also check: http://h30434.www3.hp.com/t5/Other-printing-questions/HP-Photosmart-C4480-All-in-One-gives-error-from-HP-Solution/td-p/105711

  Printing problems? Try the HP Print Diagnostic Utility

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02114788&cc=us&DLC=en&LC=en&product=3418705

• HP Officejet Pro 8600 e-all-in-one printer - N911a (cannot control the size of the item being analyzed).

  Hi all

  HP Officejet Pro 8600 e-all-in-one printer-N911a, XP operating system. It's all new today and I'm very aware of this new stuff. (I'm older)

  My old Scanner from HP (HP Scanjet G 4010) let me resize my photos or obituaries that I put in a genealogy program. When you try to analyze recent articles in my program, in that I have a small image to the left of the page with the rest of a page 8 x 11 white.

  Is it possible to implement on this 8600 or am I missing something?  Any help or ideas appreciated.

  Thank you

  Glen

  Hi oorwill44,

  Welcome to the Forums of HP Support! I understand that you are not able to control the size of the scan, you make your HP Officejet Pro 8600. How did you install the software for your computer that is running Windows XP? How do you scan, you scan the front of the printer, or you use the HP software on the computer?

  Please take a look here: how Scan: Windows XP

  I hope this helps, let me know if you have any questions.

  Thank you

• HP Deskjet 2540 all-in-one: printer stopped connecting to the wifi network

  Hi, my printer has suddenly stopped detecting my wireless network. When I turn on the printer, wireless blue light continues to blink and there is an exclamation point on the screen of the printer. I still have the same wifi network as before and have not changed it or its parameters. I have not physically moved the printer and the wireless works fine for all computers, iPads, and phones.

  I tried to uninstall and reinstall the HP Utility Set Up software but it couldn't detect the printer to set up.  I also tried running the diagnostic results, but all the results, said 'Not work', 'Not applicable' or 'None'. I can't even an IP address for my printer.

  My laptop can detect the printer if I turn on the wireless Direct button and I connect to this network on my laptop, but that's all. I'd rather connect the printer to the wifi so I can print from all my devices (phone, iPad etc.). The printer is less than 6 months and I do not understand what is the problem with him. Can you please specify?

  Hey @Sue1990,

  Welcome to the Forums of HP Support! I hope you enjoy your stay here.

  I understand that the all-in-one printer Deskjet 2540 does not connect to your wireless network. I can help you with that.

  To connect the printer to your network again you will need to run the USB cable from the printer to your computer Mac OS x 10.7. This makes the open Applications, Hewlett-Packard and inside this folder you will find a program with a similar name to the installation wizard. If you run this program, then you will find options to connect your printer to your wireless network.

  Please let me know how it works for you and let me know if you have any questions.

  Have a wonderful evening!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.

  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

• HP Officejet Pro 8500 has compatible with w2k8 R2 e-all-in-one printer drivers and XP clients.

  Hello

  I am looking to buy one-

  HP Officejet Pro 8500 has e-all-in-one printer (CM755A) - for our Organization, we use Windows server 2008 R2 Standard 64-bit with XP clients and wanted to know if this printer is compatible with w2k8 R2 drivers?

  Looking forward to hear from you.

  Thank - you

  It is compatible, but what I recommend is to get a newer version of the 8500 which is 8600

• >: everyone is having the same problem with all the days that I have now with the update on thursda after update, it could not be started "could not find xpcom" restored Dáil

  with the update of daily Thursday (Australia) after update owned couldn't boot received message "could not find xpcom.
  I then restored by day sauvegardΘ installed upgrading again every day would not restart with the same message
  I tried again on Saturday you have the same problem
  I'm now ignoring the update message that is very annoying because he wants me to update daily

  The bug in question should be solved with a daily update of today. However, I agree with the recommendation to go with 31.0 once it comes out next Tuesday, or at least to use the beta versions (once per cycle) as a compromise between stability and get the latest features and updates to the platform.