My toshiba satelite freezes at startup and pushes me to f12 or f2

Similar Questions

• Dreamweaver 2015.1 freeze at startup and during shutdown

  Win 7 x 64 SP1

  5960 x cpu

  MB: RAMPAGE EXTREME V

  64GB mem, Gskill

  ASUS Titan X GPU

  Zalman PSU 1000HP

  Stable the system otherwise.

  It always starts by ' switch to ' / 'Retry', sometimes it just freezes at startup for several minutes.

  and when shutting down, it freezes just minutes.
  

  This happens all the time... I'm fricking out!

  Thank you!

  The problem, or one very similar to it, seems to have something to do with the functionality of cache for the site of DW. A workaround that has helped others is to create a new site and leave it empty then switch to this empty site just before turning off.

  If this does not help, I would also try to disable the Cache of the Site all together...

  1. go to Site > Manage Sites

  2. highlight the site and click the button change

  3. go in advanced > local news

  4. uncheck the box enable Cache

  5. save

  6 rinse and repeat for each site

• El Capitan freezing at startup and randomly crashing

  I have an early 2011 Macbook Pro with 16 GB of RAM with an EVO 840 Samsung SSD (8.2) and I'm running OS X 10.11.1. I've never had any problems with this machine before El Capitan. In short, I believe that others have a similar problem: El Capitan constantly hangs when starting with one of the following problems:

  1 progress bar will get to halfway, and then the screen turns white and does not load.

  2 gauge will get to halfway and then I get a garbled (graphical) bar across the screen and then it goes to a white and does not load.

  3 gauge will get to halfway, then the screen turns blue and does not load (sometimes it will stop after about 30 seconds to a minute).

  4 progress gets to half way and the screen freezes.

  In addition, the machine will crash at random either stop, or go to a blue screen (after which I start the reboot process).

  After several PRAM (Command-Option-P-R) resets the machine will finish start (sometimes 30 minutes or more), but it doesn't seem to be a reason why it starts later (I can't detect any type of model).

  Initially, these problems started when I upgraded to El Capitan. Finally, I gave up and made a complete, clean, reinstall the operating system. After a few days, they began does not happen. The only 3rd party software, I installed is ClipWrap, Tor, office 2016, Trim Enabler (I disabled) and Quicken 2015. I looked for any offending kexts (as mentioned in the different for one), but do not seem to have any of them.

  If anyone can help, I would really appreciate it. When El Capitan works correctly, it's fantastic... but these accidents are driving me crazy.

  According to the specificationsof Apple, this model can use a maximum of 8 GB of memory, but you have installed 16 GB. The results are unpredictable. I know that the seller of spare RAM parts indicates that the configuration will not work. If you accept this insurance, please ask the provider for help in case of problems you have. Otherwise, reinstall the original brief, or the new memory meets the official specs.

• Sansa Clip freezes at startup and on the firmware update

  After unplugging my video to my computer, it is hung on the screen "Connected".

  I forced a reset by pressing the power switch it 10 seconds

  He then restarted and hung on the Sansa screen

  I followed the instructions given in these forums in order to download the update of the firmware, mount the Clip in MSC mode and install the firmware.  Unplug the Clip, it hangs at "Update Firmware in progress" screen.

  I then re-mounted the Clip in MSC mode and deleted all the files of music and the update of the firmware.  After disconnection, he hooked again on the Sansa screen.  I then mounted in MSC mode and re-installed the update of the firmware.  He is now suspended again at the screen to update the firmware.

  Any suggestions would be greatly appreciated!

  The following procedure restored the Clip, but requires access to a Windows operating system:

  1. Tower Mounting Clip in MSC mode off camera (now switch is in position 10 sec If necessary 'on'). Set the switch to position 'Hold '. While pressing the "Select" Center, plug it into the USB port on a Windows computer. Wait for Windows to recognize the device before you release the "Select" button

  2. format of the Clip Double click on 'My Computer' to open a window of the Explorer. You should now see the video listed as a reader. Right click on the video player icon and select "Format". Select "FAT32". Do not check the box "quick format". Format the drive.

  3. Finish you can now disconnect the Clip of the computer and it should behave as a Clip of the new out-of-the-box. If you wish, you can download Sansa Updater software from the web site of Sansa (Sansa > support > Clip > downloadsansa Firmware Updater) and run it to install the latest version of the firmware on your device.

• Qosmio G30 freezes at startup of Norton Internet Security 2008

  Norton Internet Security 2008 will freeze my computer because soon, it attempts to load and the only way to do is to restart the system by pressing the on/off key.

  My laptop is a Toshiba Qosmio G30-177 (model No. PQG32E-02G022GR) with Vista Ultimate and pre-installed NIS2007. I have no problem with this NIS2008 version on my other laptop (Qosmio F10 - PQF10E-02300JGR, WinXP MCE).
  NIS2007 works well on my G30 and I have no problems at all, but more recent versions of NIS seem to be in conflict with my system:

  1. I am able to install and run the new version, download all updates and adjusting the settings. Maybe, a couple days later my computer freezes after start in exactly when the NIS tray icon appears. For a few seconds there is simply no response of the system at all and the LED of my laptop show that any HD activity has ceased. After having been inactive during those seconds, the cooling fan will start to operate at maximum power, creating a huge noise that I never experienced before, not even while the CPU was operating at 100% for a while due to other programs. Force a reboot, that's all I can do.

  2. now, this time, I rebooted my laptop successfully even once (took a few attempts) and it all of a sudden not freeze. Then I disabled the firewall and auto-protect at all times, so there was no freezing at startup and I just had to enable both the firewall and auto-protect after start manually. In order to avoid the gel again after the reboot, I always disabled NIS before shutdown. For one or two days of workaround has been quite successful.

  3. all of a sudden, after one or two days, this work around will become useless, because the system begins to freeze again at the time of the icon is displayed. In this case, restart has no effect at all, and NIS will continue to freeze at startup. I also tried to prevent form from NIS to ccApp.exe run automatically at startup (administrative tools > system configuration > "Startup" tab). It's successful and my laptop is able to start normally, but if later I try to start NIS manually, it will freeze again.

  I had this problem since NIS2008 just came out, so I thought that at the same time an update Windows or Norton may have solved the problem, but this weekend I gave another NIS2008 trying without success. I'm pretty sure that the problem is not caused by other software than Windows or Norton, because I also tried to install NIS after a full system recovery, so I've only preinstalled NIS2007 and Vista on my laptop. I use Norton removal tool and follow the instructions to uninstall before attempting to install the new version of course.
  My last hope was that the version of NIS2009beta somehow would not freeze my system, but it does. It does not matter if I try to start 2008 or version 2009beta, the problem is exactly the same.

  What really motivates me almost crazy is the fact that NIS works perfectly for a while, then needs enough small workaround, and then after some time completely refuses to work. In these two days I do not change system settings, install or uninstall programs or doing whatever it is that I felt might conflict with NIS...
  So far, I have no idea of the solution and have again use NIS2007.

  Someone knows how to fix this?

  Hello

  To be honest I don t use the Norton internet security because it slows down the performance of the laptop and he needs too many resources.
  I used the NIS06 and after several months of use I removed it from my system for the reasons mentioned above.

  I put really know what might be a problem with your Norton Internet Security but I guess its associated software question maybe there are a few compatibility issues with vista and NIS08. Who knows...

  In my opinion, you should first check the Symantec Web site for more details.
  Maybe these questions are mentioned somewhere in the FAQ section and maybe some updates or patches are available.

  Good bye

• Applications Mac 2015 CC freeze at startup since the update

  I ran the updates last week and each CC app now cycles constantly, causing my computer to slow to a crawl and freezes at startup and I have to force reboot the system with my power button. Whenever my volume Directory is damaged and must be repaired.   I reinstalled DW 2015 and it can work, but my apps CS6 certainly work, unless I try to start a CC application first.

  "Here is a sample of my messages to the console of the PS that level."

  added support of microprocessor extension. » :

  30/04/16 2:57:12.727 PM Adobe Desktop Service [1803]: objc [1803]: Httpentete of the class is implemented in/Library/Application Support / Adobe / Adobe Desktop Common/Core/AdobePIM.dylib both/Applications/Utilities/Adobe Creative Cloud/HomePanel/HomePanelBL.bundle/Contents/MacOS/HomePanelBL. One of the two will be used. That one is not defined.

  30/04/16 2:57:12.727 PM Adobe Desktop Service [1803]: objc [1803]: ProxyManager of the class is implemented in/Library/Application Support / Adobe / Adobe Desktop Common/Core/AdobePIM.dylib both/Applications/Utilities/Adobe Creative Cloud/HomePanel/HomePanelBL.bundle/Contents/MacOS/HomePanelBL. One of the two will be used. That one is not defined.

  30/04/16 2:57:35.763 PM Adobe Desktop Service [1803]: dynamic_cast 2 error: one or more of the following type_info has hidden visibility.  They should all have public visibility.   N8CryptoPP20StreamTransformationE, N8CryptoPP36CipherModeFinalTemplate_CipherHolderINS_16BlockCipherFinalILNS_9CipherDirE0EN, S_8Rijndael3EncEEENS_14CBC_EncryptionEEE, N8CryptoPP28AuthenticatedSymmetricCipherE.

  30/04/16 2:57:53.123 PM Adobe Desktop Service [1803]: warning: Gestalt gestaltSystemVersion selector returns 10.9.4 instead of 10.11.4. This isn't a bug in Gestalt - it is a documented restriction. The NSProcessInfo operatingSystemVersion property to get the correct version number of system.

  Location of the call:

  I did remove and reinstall before Manager app and creative cloud... I'm on a slow internet connection if updates or reinstall takes me 12 hours.

  I suspect that part of the problem may be the internet CC... but not sure audit services.   I'm quite frustrated to give up the entire suite of CC.

  I had to reinstall my whole OS El Capitan among other attempts to try to solve this problem...

  OK, I come to the broad support with apple and it seems that CC is no weird GPU calls that are not finishes and the programs are suspended.

  GPURestartReportEnd

  30/04/16 2:44:29.000 PM kernel [0]: attempt to restart GPU (AMD over-pants D500)...

  30/04/16 2:44:29.000 PM kernel [0]: [2:0:0] unable to reset hung GPU! result = 151 ulResetBlockBitmap = u 0 x 00008000lResetResultBitmap = 0 x 00008000

  30/04/16 2:44:34.000 PM kernel [0]: [2:0:0] GPU HangState 0x00000000, 0 x HangFlags 00000006: IndividualEngineHang 0, NonEngineBlockHang 1, FenceNotRetired 1, PerEngineReset 0, FullAsicReset 1

  30/04/16 2:44:34.000 PM kernel [0]: * GPU ASIC startup Log *.

  -

  HangFlags 0 x 00000004 GPU: AsicHangState 0 x 00000004, AsicResetRequirement 0x00000002

  IndividualEngineHang: 0

  NonEngineBlockHang: 0

  FenceNotRetired: 1

  PerEngineReset: 0

  FullAsicReset: 1

  HangEngineBitmap: 0x00000000

  ------------------------

  PCIe AMDTahitiGraphicsAccelerator material: [2:0:0] State: ENABLED

  Configuration: deviceBits: 0x5009679e, capabilityBits: 0x30840b00

  TotalVideoRAMBytes: 0x00000000c0000000 (3221225472)

  Path: / Applications/Adobe Photoshop 2015/Adobe Photoshop 2015.app/Contents/MacOS/Adobe Photoshop 2015 CC CC CC

  40? (Adobe Photoshop CC 2015 + 3845113) [0x10bef6bf9]

  40? (Adobe Photoshop CC 2015 + 3843018) [0x10bef63ca]

  40? (Adobe Photoshop CC 2015 + 11471088) [0x10c63c8f0]

  / Applications/utilities/Adobe Creative Cloud/*/CCXProcess.app/Contents/libs/node

  40 adobe: vulcan::servicemgr::RegisterForEventsRequest::Run() + 1005 (VulcanMessage5.dylib + 59679) [0x10279091f] 1-40

  40 adobe: vulcan::servicemgr::CSIRequest::Execute() + 50 (VulcanMessage5.dylib + 56934) [0x10278fe66] 1-40

  0 x 100000000 - 0x100e17fff <77B964CF-C5AD-343F-B912-2186CF942FBF>Node/Applications/Utilities/Adobe Creative Cloud/*/CCXProcess.app/Contents/libs/node

  0 x 102782000 - 0x1027bafff VulcanMessage5.dylib (1) <4B0B878A-02F8-3EB1-89D5-4071034EDD0D>Applications/Utilities/Adobe Cloud/*/CCLibrary.app/Contents/js/node_modules/node-vulcanjs/build/Release/VulcanMessage5 creative .dylib

  Path: Applications/Utilities/Adobe Creative Cloud/*/CCLibrary.app/Contents/libs/node

  40 adobe: vulcan::servicemgr::RegisterForEventsRequest::Run() + 1005 (VulcanMessage5.dylib + 59679) [0x10766f91f] 1-40

  40 adobe: vulcan::servicemgr::CSIRequest::Execute() + 50 (VulcanMessage5.dylib + 56934) [0x10766ee66] 1-40

  0 x 100000000 - 0x100e17fff node <77B964CF-C5AD-343F-B912-2186CF942FBF>Applications/Utilities/Adobe Creative Cloud/*/CCXProcess.app/Contents/libs/node

  0 x 107661000 - 0x107699fff VulcanMessage5.dylib (1) <4B0B878A-02F8-3EB1-89D5-4071034EDD0D>Applications/Utilities/Adobe Cloud/*/CCLibrary.app/Contents/js/node_modules/node-vulcanjs/build/Release/VulcanMessage5 creative .dylib

  ------------------------

• Toshiba satellite a305-S6905 freeze at startup

  Toshiba phone freeze at the start of window screen... I can't type in the form... Problem laptop: does not start... I put in the disk repair or wipe the hd, but as soon as I clicked on repair or install the following screens are invisible to me. I know because I played a little clicking on and a Help menu came. Can not do anything good. !

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Toshiba phone freeze at the start of window screen... I can't type in the form... Problem laptop: does not start... I put in the disk repair or wipe the hd, but as soon as I clicked on repair or install the following screens are invisible to me. I know because I played a little clicking on and a Help menu came. Can not do anything good. !

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hé M. krome

  If you are having problems using the toshiba recovery options I would suggest that you contact toshiba support for assistance

  You can contact toshiba link below

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Walter, the time zone traveller

• Satellite C660 - TouchPad freeze at startup

  Hi I'm new and this is my first post so please be gentle!

  I have a Satellite C660 with windows 7 purchased as a refurb factory it is my 1st laptop, I have a problem after startup, and everything loaded on my desktop, it seems that if I use my TouchPad too early it freezes, he did it since I bought it, but I thought it was me being not used to a touchpad and the "bloatware" to start is the only way I can get the pointer to move if I have a finger from the top to the bottom of line scrolling to the right of the TouchPad horizontally or diagonally, it moves very slowly until I can be open and close a browser window, the file or even the startup window, then it will then act as usual and do not freeze again for my entire session If I leave it for five minutes at the start, it works fine, sometimes it will freeze also out of standby or hibernation, but not always.

  OK, I thought maybe it was the necessary driver update I checked in Device Manager and it said it was working properly but that of course is when the pointer is as it should be, in the Device Manager if I pilot of the touchpad/driver/update and internet search it tells me I have the drivers updated If I choose to search for a driver on my computer/let pick me from a list of device drivers that I have the following:-

  Mouse Compatible PS/2
  Synaptics PS/2 Port Compatible TouchPad
  Synaptics PS/2 Port Compatible TouchPad
  Synaptics PS/2 Port TouchPad

  I should have all those showing? can someone with a file of similar specifications check that for me please?

  strange thing is that if I go to TouchPad properties via the taskbar, and then click driver all options except the driver Details are grayed out and done, I can open two windows of TouchPad properties from the device and the task bar manager and have them on the screen at the same time.

  Some things I should mention are a mouse in the usb works fine, I stopped a lot of the "bloatware" and would help the useless stuff running at startup, hoping that I have disabled the function of locking of the click on the TouchPad, sound as it needs to be "warmed up" to run correctly when running properly it works fine without problem as the laptop came pre installed and only Disc I have is the recovery one create you the initial Setup!
  Any help would be appreciated!

  Hello

  First of all, I don t think that this problem is related to the installed touchpad driver but if you wish, you can install the latest touchpad driver available from the European driver Toshiba.

  Visit the European driver Toshiba page and choose:
  Computer laptop Satellite Satellite C series Satellite C660 driver Touchpad

  Now you should get all the touchpad driver available for C660 series.
  I found the driver for the touchpad Synaptics for Win7 32 bit and 64 bit.
  The latest version seems to be v15.2.11.1

  I think you should go to Panel of-> Software
  Check here if Synaptics touchpad driver appear in the list of installed software.
  If so, uninstall the present.
  Then, download and install the Synaptics v15.2.11.1 driver

  The touchpad settings could be changed in Control Panel-> mouse-> tab advanced-> button Advanced.

• My Toshiba laptop freezes!

  Whenever I connect and the office charge my laptop freezes and the only way it works is when I boot in safe mode! Can anyone help? I have a Toshiba Satellite L300-1BW on Windows Vista! Thaks in advance to anyone who can help!

  Hello

  You could try a more ancient date from the system restore - system restore can also be made with the Startup Repair tool
  If there is available Restore Points. Your Toshiba drives allow a startup repair. Just put in the DVD and
  then set the Boot Options on the DVD that you start or adjust the CMOS/BIOS to use the DVD as 1st boot device.
  (Usually F12 for device startup and F2 for the BIOS/CMOS settings options (for Toshiba).)

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Try the above and if no help do the following:

  Try Startup Repair - you should have a Vista disc, otherwise you can try this mode safe mode if you can get there.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Try runnng Chkdsk of Recovery Options
  (it of a more efficient way to manage to restart the computer and might work)

  -----------------------------------------------------------

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  --------------------------------------------------------------------------

  If you are running follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log.  You can paste portions of error here, note that some Articles
  could repeat so only paste each only once in sections. A section is usually 10 lines or more.
  http://support.Microsoft.com/kb/928228
  Rob - bicycle - Mark Twain said it is good.

• G50-70 freeze at startup

  Hi, I have a G50 - 70 is only around the age of 2 months. Since then, he has had a problem with the immediate freezing at startup on the Lenovo screen where white swirling points stop. It happens about 1 in every 2 or 3 times it starts.

  I thought it would be Bios so I installed the 2 updates that have been released without effect. I tried to turn it off to quick start and the alternative boot - USB, LAN options.

  Any suggestions?

  Thank you

  Hi Rich5555,

  Have you tried to reinstall the driver and check the issue?

  Try to start the system in safe mode and restart the system and check the question, also perform system retore and check for the issue.

  I hope this helps. Do not post back if the problem persists.

  Best regards

  Ashwin. S

• My V5-571 CAREB is extremely slow at startup and would become very hot gel frequently

  My laptop CAREB 571 V5 running on Windows 10 is extremely slow at startup and becomes very hot, gel frequently.

  I recommend reloading the windows to see if it helps the slow and freezing. If it is not the case, I suggest that you contact technical support for repair options. I am including the instructions below to reload Windows without losing any data.

  http://Acer.custhelp.com/app/answers/detail/A_ID/37335

• My computer constantly freezes after startup

  Original title: System Hang

  My computer freezes after startup or during startup. Whenever I look at the problems and solutions in Control Panel, it says that my nvidia graphics driver has stopped working properly and should be updated but I checked and installed the latest version. What else could I try? I would appreciate the help as I have had this problem before and it stopped for a while and started again.

  Thanks-James

  Hello

  Yes, different drivers depending on the graphics card which is present in the system. I suggest to check the link below and download the drivers that are present in the link.

  Vista 32 bit

  http://www.nvidia.com/object/Win7-WinVista-32bit-266.58-WHQL-driver.html

  Vista 64-bit

  http://www.nvidia.com/object/Win7-WinVista-64bit-266.58-WHQL-driver.html

  After having tried the steps, let us know if the problem is solved or not.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Startup and loading Different programs

  Computer is very slow at startup and constantly get different and various Windows error messages such as:

  1. Windows Media Player has stopped working.

  2. Windows Media Center Store Update Manager no longer works

  3 Kbd.exe stopped working and was closed

  4 search index has stopped working and was closed.

  5 Svchost, a few things of Protocol and other

  Here are some of the examples, I have seen many others.

  As I said, the computer became very slow to start once it arrives on the desk.   I ran registry cleaners, disk cleaners, defragmentation... etc, etc.  The loading of any program from the desktop is extremely slow, but once they charge they seem to work well, except when they are required to "load" other things.

  I'm not a computer expert, but I do ok with repair of problems on my PC and others.  This however, left me speechless.  It seems to be a problem with Windows programs by default and, possibly, a hard drive problem.  Any help would be appreciated, and if there is more information that anyone might need, I will be happy to provide it.

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• EliteBook 8540w randomly freezes at startup

  Hello

  Since I activated the encryption of the hard drive in HP ProtectTools and invalidate it later, I experience random freezes at startup of Windows 7 Professional 64 bit. The gel has also occur when booting from the Windows 7 DVD and a reinstallation of the operating system Windows 7 also has not fixed the problem.

  Help, please.

  Thanks in advance,

  Donenzone

  You might want to try a complete reformat of the hard drive and reinstall W7.  Ugly process, but then you will have a better palce to start with future debugging if necessary. However, before you do a reformat, try the following two procedures.

  Try this procedure:

  Disconnect the PC and open it. Clean all the dust. Carefully, remove and replace all the cables towards the mother board one at a time. Do the same for memory DIMM and the video and the sound of cards if you have a. Plug your PC give a TI a go.

  Here is another list of things to try:

  1. Download cookienator (it's a gift) and clean the House.
  2. Open my computer and right mouse click the hard drive--> properties--> disk cleanup
  3. Start Internet Exployer--> tools--> Option Internet--> delete browsing history
  4. Open my computer and right mouse click on the hard drive-->-->--> Defrag tools properties now
  5. Open my computer and right mouse click the hard drive--> properties--> tools--> Check now
  6. Open the RUN and enter the following commands:

  cmd

  sfc / scannow---> it will check your critical system files and try to fix

  output

  7. open the window RUN and enter the following command: chkdsk

  8 restart and see how things are going.

• Freezing of frequent and sound distortion - Win7 - 64 bit

  Hello

  I use Windows 7-64 bit on a Dell XPS 15z.

  My computer used to freeze that rarely (maybe all the ~ 10 h) how would the sound be too distorted. Nothing could run for a few seconds and then it could continue operating as if nothing had happened.

  Since the last windows updates (12.02.15) frost got much more frequent (every two minutes), but much shorter. Freezes come about half a second. Always the same appearance, nothing works, his distorted bodyguard, then run as if nothing had happened. There seems to be no relationship between the workload on the aspect computing and lag.

  Steps I took to try to resolve the problem:

  1. File Checker system - sfc/scannow in admin in console mode. No problem found.
  2. No advanced tools to solve Performance issues - reported no problem.
  3. Uninstalled Realtek High Definition Audio Driver - manually reinstalled the latest version.
  4. Uninstalled the IDE ATA / ATAPI drivers - let Windows reinstall them automatically.
  5. Run the check errors on the C: drive.
  6. Looked at the details of performance in the event log - no cases listed at the time of the freeze. However error during startup and caution on shutdown are indicated in the case log event log attached to error starting at the end of the present.

  More information about the system

  -C: drive is an OCZ 60 GB agility, D: drive WD 750 GB.

  -BitDefender Antivirus software and SpyBot S & D

  -One now uninstalled Avira Antivirus,

  -All installed Windows updates

  -All drivers automatically checked for the latest version

  -No external equipment connected, with the exception of the speakers and mouse Logitech

  -Gels happen that both plug and battery

  Error: Startup performance monitoring

  -System

  -Supplier

  [Name]  Microsoft-Windows-Diagnostics-Performance
  [Guid]  {CFC18EC0-96B1-4EBA-961B-622CAEE05B0A}

  Event ID 100

  Version 2

  Level 2

  Task 4002

  Opcode 34

  Keywords 0 x 8000000000010000

  -TimeCreated

  [SystemTime] 2015-02 - 12 T 04: 22:30.059627200Z

  EventRecordID 6071

  -Correlation

  [ActivityID]  {03702C50-F800-0002-2944-EE377B46D001}

  -Execution

  [ProcessID] 1804
  [ThreadID] 1820

  Channel Microsoft-Windows-Diagnostics-Performance/Operational

  Johannes of computer-PC

  -Security

  [User name]  S-1-5-19

  -EventData

  BootTsVersion 2
  BootStartTime 2015 - 02-12T 04: 20:22.702800300Z
  BootEndTime 2015 - 02-12T 04: 22:27.922423500Z
  2788 SystemBootInstance
  UserBootInstance 2743
  Distribution 78795
  MainPathBootTime 23395
  BootKernelInitTime 23
  479 BootDriverInitTime
  BootDevicesInitTime 1909
  BootPrefetchInitTime 0
  BootPrefetchBytes 0
  BootAutoChkTime 0
  BootSmssInitTime 9463
  BootCriticalServicesInitTime 509
  BootUserProfileProcessingTime 850
  BootMachineProfileProcessingTime 3
  BootExplorerInitTime 1605
  BootNumStartupApps 17
  BootPostBootTime 55400
  Fake BootIsRebootAfterInstall
  BootRootCauseStepImprovementBits 0
  BootRootCauseGradualImprovementBits 0
  BootRootCauseStepDegradationBits 0
  BootRootCauseGradualDegradationBits 0
  Fake BootIsDegradation
  Fake BootIsStepDegradation
  Fake BootIsGradualDegradation
  BootImprovementDelta 0
  BootDegradationDelta 0
  Fake BootIsRootCauseIdentified
  1185 OSLoaderDuration
  BootPNPInitStartTimeMS 23
  BootPNPInitDuration 1964
  3412 OtherKernelInitDuration
  SystemPNPInitStartTimeMS 5368
  424 SystemPNPInitDuration
  SessionInitStartTimeMS 5801
  Session0InitDuration 1887
  547 Session1InitDuration
  SessionInitOtherDuration 7027
  WinLogonStartTimeMS 15264
  5671 OtherLogonInitActivityDuration
  290 UserLogonWaitDuration

  Thanks for the tips. Today I have not had everything freezes more :) I guess that the SSD firmware update did the trick, although there are still a few freezes yesterday after I had updated.

  I have updated the firmware of my 3 OCZ agility.

  The tool to create a bootable USB key to update the SSD if it is drive C: can be found here: http://ocz.com/consumer/download/firmware

  I ran the DELL, diagnostic tool, which did not find any problem.

  I have conducted an audit of the memory on the system during startup. Not the questions or the other.