My video speed

Similar Questions

• Audio/Video speed unsynced

  The audio seems to play at a speed slightly higher than video in Ae.

  You don't notice it at first, but after a little less than 40 min, he reached a few seconds. This isn't compared to where you start the preview, but to the work area.

  No difference between auido and RAM Preview.

  Some of the material is in the ever dreaded .mp4 format, but the problem occus to .avi so.

  The problem is not specific to composition, as a separate composition, with a single 40-minute long avi layer, has exactly the same problem.

  I was not able to determine whether the footage that is too fast or the video that is slow. He appeared fairly recently, this isn't something with the files themselves.

  AE CS6.11.0.0378, I think

  Demo version

  7.9 g ram to allocate

  Win7 proffesional

  Only the .avi and .mp4, can't say much more than that

  And don't tell me to extract the audio and add it separately. I wan't to solve the problem, not circumvent.

  Also, don't be surprised if I've missed an obvious part of the way it is supposed to work. I'm still quite new to this.

  There is one thing that I see that is definitely fake: the pace.  Do not 23.970, it should be 23.976, and Yes, that tiny little variation makes a difference.

  I would like to know how you are the RAM Preview a clip that lasts 40 MINUTES flippin ' with only 8 GB on your machine.  People with 64 GB memory cannot prevew Meanwhile, then, how you do?

  Something just does not here.  You can start by describing in detail how you do your RAM previews.

• Video speed

  With the help of Presenter 7 + Office 2007 + ASUS PRO57S Webcam recorded video on-the-fly speed upward and do not appear in the actual speed. Audio is normal speed and stop when the video is finished.
  Everything is OK for imported files
  
  

  The problem is the driver for the webcam: webcam another well doing things

• video speed cc 2014 card

  I have AE CC 2014. My Ram preview and render faster with my old system than my new. IM missing something. Check a bunch of tuts utube but no real change. Anywhere I can find the settings to get my consumption of cigarettes from system? Thank you

  Marc

  See this page for more information on memory and improving performance in After Effects: http://adobe.ly/dC0MdR

  See this page for resources to make After Effects work faster: http://adobe.ly/eV2zE7

  See this page for more information on material for After Effects: http://adobe.ly/pRYOuk

• How can I remove the videos from the sample on "BOLD" 9000 blackBerry smart phones?

  There are 2 videos of the sample under/system/samples/videos taking 73 MB.  I tried to remove them, but saw the No.

  options for the Explorer discovers (in media player).   If those who take a lot of space in the main of 128 MB flash, it's a huge waste and I need to get rid of them.  I'm already dipping down under 20 MB of free space on occasion, and I only had the phone for a few weeks.   I don't have many apps installed yet (just thinkMicro, Opera Mini, amAze and BeamReader).   I don't know there are other applications that I want to install in the future.

  Is there another Explorer of files that I could use, that has the privileges to delete these files?

  Thank you

  Dave

  Odd. I deleted my sample videos (Speed Racer, etc.) directly in the video menu. Highlight the name of the vid, Menu > delete.

• Video Clip inverse Points

  I need my video clip in reverse, then play normally, and then replay the upside. How can I do this?

  As the adjustment to change the video speed points.

  Honestly, the best way to do it with the least amount of noise is just for:

  The music video for the pop in your sequence three times in a row

  Click with the right button on the first clip, select speed/duration

  Box reverse speed and Ripple Edit Shifting Trailing Clips

  If you want to change the speed

  Click OK.

  Do the same with the third clip.

  You can get fancy with more granular control with time-remapping, but first, you can remap the clip play backward speed. You could go to After Effects to it, but honestly, what you describe sounds simple enough to use only the steps above.

• looping video backgrounds

  Happy holidays!  I worked on my site that has a video background with movement involving smoke coming from a censor who is on the far left hand side.  The problem I have is that the loop has a break at the end of the loop: home

  This problem is obviously less noticeable when I use a longer video in the background, but I'm afraid at the moment where the video loads, visitors will be out of the home page.  So, I shortened the video in the hope that a smaller file will load faster and the smoke is started as soon as possible. I tried to do a background image, then isolate and cropping just the censor smoking as a video to put on top of the photo to make the file smaller; the problem is the video gets centered in the Middle, but even if I get the video censor at the place I still have the video break on reloading.  After reviewing this issue, I wonder if there is another way to go about it all together.

  
  

  All the advice on how to remove my idea would be greatly appreciated! 

  Thank you

  Steve

  Hi Steve, you can either edit the video itself, so that it should not show difference in starting the video image on break, the start and end frame must be the same, so this break can be avoided. Another way would be to increase the video speed, which would make it difficult for users to catch the difference while the video is paused.

  Thank you

  Sanjit

• Correspondence of time remapping with ramps for video editing of first CC 2015/output

  I would like to ask experts, which will be the best workflow...

  Location:

  I have the project with 50 + video segments where I have to slow down part of the clip to highlight some details (in my case - CIRC. enduro motorcycle - need to slow down the part where is visible some technical riding etc.).

  I use bulit Premiere Pro CC 2015 in the tools of the keyframe to select two points between where I change the speed for example at 50%. First has nice handles around the keyframes where I can create smooth ramp, so the change in speed is graduated.

  Insofar as simple here s

  But the first will not do the same with audio track associated with each clip. In the audio is for his example of the motorcycle.

  I need to have his original when the video is playing at 100% speed and its different from "lower pitch" when is slowed down and once again normal sound when is 100% video speed on the end.

  So I edited each audio segment to the points of the time remap keyframes, manually set the speed of the middle section and - it s horrible. Video slows gently while it is quite annoying audio changes.

  I need to make the same effect as what we were doing with Ribbon old VCRs in television production - smooth audio ramp corresponding to the video and return to full speed.

  As my knowledge about hearing is close to zero - I would like to ask at the front to start learning - I can do up in the hearing? What I have to do it every time from scratch or can I use existing keys from first images? Anyway how above 'automatic '? What workflow you have advice when I need to do it quite often many of these clips?

  Thank you much for the help.

  P. S. tried to find out, after a while with the help chat online too...

  Most of the discussions and tutorials is very old - there may be some new features in CC 2015 in order to do compare with 2011 toolset or almost. And in many video tutorials only covered - they talk about audio at all. But for audio track that I use, is the audio very good.

  Here is an example of a part of the timeline. I needed this project to do quickly, I decided to stretch the entire audio segments to match the new length of the video. It s not correct but it sounds better then it divides in three parts with a slow speed in the middle. Just to match audio speed changes in the Panel of video editing

  

  Not sure about the exchange of workflow with first for this type of effect.

  However the hearing can make the effect of change of speed/not very well using effects/time and Pitch/Pitch Bender. This uses a waveform envelope on with keyframes to vary the height must therefore ideal for your needs. In order to see where on the waveform, you need to place keyframes without doubt the best way is to place markers on audio in first at beginning and end of each ramp. These should be done through when you export audio in Audition where you should be able to match Pitch Bend keyframes to markers.

• by focusing on a specific and moving a video area

  Hello

  1. is it possible to focus in a specific area and moving a video?

  For example, a ship sailing on the sea. Is it possible to mark an area around the ship and have the marked area to move the ship to the exclusion of the rest of the video as well as close to the top of the ship is displayed permanently?

  2. is it possible to stretch / video Speed-up to a delivery of musicians; to synchronize with audio of a studio recorded version of the song?

  For culture "," there are at least two ways to do this easily, but with different visual results:

  1. Apply the cropping effect necessary along with the Source footage item, but this leaves the black bars on the edges of the video image.
  2. Adjust the Source footage Clip fixed effects > Motion > size (Zoom) and movement > until (to the frying pan where you want) and let the size of the frame of the project effectively crop area, which extends beyond. The possible limitations with this method are that if one of the scales too much, the image will degrade in quality, but a few will very probably never noticed.

  Two methods of keyframes of effects over time, which might be desired.

  Good luck

  Hunt

• Xha1 24F footage that video play fast but Audio is normal. Body 2.0

  Hey Gang, I am having trouble with my my body 2.0 xha1 24f footage. I installed the canon F presets and the film imported using the parameter 24f, but when I play in the timeline my video/audio is out of sync. Even when I export, nothing changes. My video is read to fast, but my audio is normal. I played a little with the fact of separate images and try to find the right video speed, with no luck. I also tried using the images on 30f timelines with no luck either.

  I searched for the answer, but nothing of this particular problem has developed.

  Any thoughts?

  Very much appreciated.

  Capture images with HDV Split with scene detection on and see how the Pro handles.

• Re: Black magic does not start on my Satellite Pro

  Hi there guys

  I have a program that I have loaded on my PC laptop Toshiba Pro. Its an official black drawings magic program related to video Production.
  The program is designed to work with Windows 7 but he hesitates because it is start and then gives an error window that says that there is a flaw in the aticfx32.dll prog.

  The strange thing is that the program will start when the computer is in safe mode and give the correct opening screen.
  Obviously I can't use it in safe mode as I have all the correct connections of the machine.

  Is the strangest thing is that I was able to make it work on 2 other machines one with XP and one with Vista and it controls the video speed very well. (the other machines are workstations so I can't really use it, I need to be portable)
  Someone else saw the above error? and why it starts ok in safe mode?

  Andy

  Hello Andy

  Toshiba doesn't support any third party application, so please, contact the program manufacturer and ask for help.
  They have the best experience with own product and should be able to help.

• My Macbook Pro keeps freezing for short periods

  Hello

  A new problem started with my Macbook pro in recent weeks. Initially, it was rare, but now he continues to be all a few minutes (it happened as I type this). What is happening is that my current application freezes for a few seconds, then returns to normal, and then the screen freezes. I'll expand a bit: while I'm typing this, suddenly the Safari froze and I just kept typing on, and when I use any action (like a slide four fingers), it works, but will not pass to the other window/app. After that, the kind of display of speeds upward, as it's contagious back in real time after the break (if I'm on vlc, TI video speed looks like 4 x, all the letters, I typd in pages apper as if Im typing God-speed). Then, a few seconds later, the computer will completely freeze, not to accept any user input and then resume as nothing has happened about 5 seconds later. This has happened very often now (I counted 3 times while I typed this place).

  Please help me on what I should try to do to solve this problem. Initially, I thought it was a problem of RAM so I borrowed my Mac mini and inserted in my Macbook RAM. He worked as always for about a day, before returning to the State of the problem.

  Data sheet:

  MacBook Pro 15 "Early 2011 model

  10.10.5 MacOS (Yosemite)

  I7 2 GHz

  4 GB 1333 MHZ DDR3 RAM (replaced by 1067 MHz RAM of the Mac Mini for a day)

  Graphics Intel HD 3000 384

  Any other information that you think will be useful, I'll add it.

  Thank you in advance for your help!

  Run this test and post the results here.

  http://www.etresoft.com/etrecheck

• Windows Server 2012 slow on ESXi 5.1U1

  Dear jury,

  recently, I installed four Windows Server 2012-VMs on my ESXi. It's a HP DL380G7 (Controller-P410i HP Xeon E5645, 144 GB of RAM, with 8 HP - SAS 500 GB in RAID6).

  All four virtual machines have a very poor performance, SMB video speed, slow slow.

  I have a server 2008R2-Windows on the same host, which are very good. If I copy a file (for example an ISO) of my client to the server, I have about 80 MB/s. If I do the same in one of my 2012 server, I get about 20 MB/s or less. Sometimes the process cancels (destination network not found)... Still the same thing if I copy between virtual machines. When the copy of CPU consumption amounts to 70%, sometimes at 100%, the server is not usable this time.

  What I've done and tested:

  * 2012 Server installed by the standard ISO (MS Action Pack-download)

  * fact update ESXi 5.1 to 5.1U1 and updated on all virtual machines VMWare tools

  * change to VMXNET3 E1000E network card

  * disabled SMB signing

  * changed SVGA drivers for MS-display Standard driver (3D acceleration is grayed out in the VM options!)

  * Settings IP of all virtual machines are ok (DHCP)

  All the 2008R2 works well, all 2012 are very slow...

  What can I check or what I got wrong?

  TIA and greetings from the Germany

  Matthias.

  It's weird,

  As I did the day 1 for my ESXi5.1 update I upated the VMWare tools on all virtual machines as well. Every server 2008R2 did a restart and they are always very good. 2012 servers did not reboot after update the VMWare Tools. Today, I did a restart of all my servers from 2012 and voila, 3 out of 4 are very good. Running quite smooth with 80 to 100 Mbps SMB-Performance! GREAT!

  Just a virtual machine is too slow I started... But this one I will get in shape too, I think that...

  Display 3D even drivers are fine now.

  Best regards

  Matthias.

• CamStudio Lossless avi - audio is only imported

  Hi all

  I have trouble getting an AVI CamStudio Lossless encoded on import into Premiere Pro, wonder if anyone can help out me? I am completely new to PP, then it may be something to do with my project configuration! My video use LZO compression algorithm and exactly is 1280 * 720 pixels with mono audio 44.1 khz 16-bit PCM. When I use the import option in PP, I have audio editing of my voice-over appears, but the video window remains empty. The import is displayed on the left side with an icon representing a speaker next to it, which I guess means that PP believes that the file contains audio only... I tried to convert the entire file in an uncompressed using VitualDub AVI file, but the noise becomes very juddery and * I think * the video speed slows down as well.

  Any help much appreciated!

  There is no 64-bit version of CamStudio codec; number of 64-bit is required for AVI editing in first Pro CS5. See Lagarith or the Codec video Ut, who both the 64-bit versions that work well in CS5 and are very popular among users here.

• I made a video on the iPhone 5 is and it reads at high speed?

  I made a video on the iPhone 5 is and it reads at high speed?

  have you done a video time?