My WD 1 TB external is not recognized on Toshiba Portege Win7 running.

Similar Questions

• 1.5 TB external DRIVE not recognized on various laptops disk

  Hello

  I was wondering if someone could help me.

  I bought my 1.5 terrabyte toshiba external hard drive just for more than a year. It works fine on my other computer, laptop and cell phone from my boyfriend, but when I joined four other new laptops (all different brands) recently it was not recognized at all on these laptops.

  Is there something wrong with my outside or something on these computers it prevents to be recognized? Do you know how I can fix this problem?

  Thank you very much!

  Hello

  And if you connect the external HARD drive to your boyfriend s computer laptop, everything is always ok? Only problems with new laptops?

  Well that s really strange have you tried another USB cable and different USB ports?

  Maybe on the new laptops the antivirus or firewall blocks access to the external hard drive. Check your security software and to allow external devices.

• external drive not recognized in my computer explorer\

  Hey.
  My Western Digital external drive is recognized on USB, but not recognized in 'my computer\ explorer' or autorun.
  This means that I can make a right click on the bar at the bottom right and 'safely remove hardware, still not displayed in the Explorer.
  I did everything I can to make this work, without result.
  Now what?

  Thank you.

  Try these:

  1 see if his watch in computer management, you might just have to assign a drive letter.
  Change, add, or remove a drive letter
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-add-or-remove-a-drive-letter

  2 try it on another computer, if its does not work, try to replace the cable with a good known working cable.

  3. open the Device Manager, see if there is an unknown device under Bus USB controllers, do a right-click and then uninstall it. If this does not work uninstall everything under USB controllers then reboot, they should put it back.

  4 run Fix it.
  Tips for solving problems of USB devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  5 see this thread:
  Windows Vista device not recognized USB
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/Windows-Vista-USB-device-not-recognized/58fa364a-6faf-44B8-9821-7f6eb4873da2

• external device not recognized

  Hello

  I'm trying to control a DSO6032A AGILENT GPIB-USB (82357 B) connected to my computer.

  I followed the instructions for the GPIB-USB, so the cable between the computer and the agilent is OK.

  I see even my AGILENT is connected via the software I have installed for the GPIB-USB:

  

  According to the instructions I found on the Web site of nor, I would then be able to find my AGILENT NI Max - devices & interfaces (here, ' peripherals and interfaces').

  However, I can't find my GPIB interface. The only thing that appeared is the device "LPT1", and when I try to open test of VISA control, I get an error:

  Error opening resource:
  ASRL10::INSTR

  VISA: (Hex 0xBFFF0011) information about the position are insufficient or well either the device or resource is not present in the system.

  

  What I first thought was that I had no drivers for my AGILENT, and so it seemed:

  

  However, I already downloaded the AGILENT 6000 series driver on NOR, who understand the device I am using.

  And it seems that the device is not recognized by LabVIEW (see connected Instruments)

  

  Which makes sense for someone?

  Should what steps I take to be able to use my instrument on LabVIEW?

  Clement Z.

  Install an instrument driver is not relevant and trying to talk to a non-existent parallel port is stupid. Since you have decided to do not use a NI GPIB controller, you spend some effort of extras on getting MAX, to see your controller and instrument. The instructions should be on the Keysight site. One of the things you need to do is to activate the Tulip support. You should be the primary, if I remember NI-VISA.

• Re: Serial number of satellites not recognized by Toshiba support

  Hello

  I have a computer laptop satellite A200, and I'm not able to find a driver for it on the Toshiba site!
  -serial number (X8172841K) is not recognized, the message is: "Sorry, your product is not found" [translated from the French]
  -the support site can not detect my laptop model
  -None of the drivers that I downloaded (the closest A200) accept to install

  Can U help me?

  Kind regards
  Sébastien (France)

  If the serial number is not detected by automatic detection you can find the drivers manually.

  Maybe you have the same A200 and my friends. His cell phone has PSAE6E part number.
  To find the correct drivers visit download Toshiba and support under http://eu.computers.toshiba-europe.com page > support & downloads > support homepage and at the bottom you will find link to download drivers.

  Go there and choose your model of laptop with brief model number.

  If you need more help please let me know.

  BTW: have you tried to find the right drivers on Toshiba France support page?

• It is not recognized on Toshiba Satellite M70-169 Web site

  Hello
  I have a laptop TOSHIBA SATELLITE M70-169
  I wanted to update my drivers, so I logged on the TOSHIBA site.
  The problem is that my phone is not listed on the site, there are * M70-168 * and * M70-170 * but not * M70 - 169 *.
  I tried the recognition by serial number, result: DO NOT RECOGNISED

  I tested the autodetection, and here too, the result was: DO NOT RECOGNISED.
  I am surprised that my laptop is not recognized on the official website of TOSHIBA, while I had bought in a store.

  Can someone tell me if he had the same problem and give me directions to upgrade my laptop?

  Thank you

  Satellite M70 is old enough laptop model, and I can imagine that auto detection tool doesn't properly work. Your laptop is the model European and part PSM70E number (very important for research).
  In any case, you can find all the drivers or updates manually. Follow these steps:

  Visit the download page for Toshiba under http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU
  Click tracking options:
  Type of product - ARCHIVE
  Family - SATELLITE
  Series of products - M SERIES SATELLITES
  Model - SATELLITE M70 (PSM70)
  Short model No. - PSM70E
  OS - operating system

  And all of the available stuff appears there.

  If you have any other questions let us know.

• Satellite L670 - 1JP external HDD not recognized at startup

  I bought an external hard drive Samsung G3. The first time I plugged it, it was directly recognized by my Toshiba Satellite L670-1JP and worked without any problems.

  But later almost whenever I start my computer, it is not the external hard drive. Then I have to disconnect reconnect en USB connection several times to make it work.

  It is your time, so how can I solve this problem?

  Hello

  Other USB devices work properly in the laptop Satellite L?

  Have you tested this disk external DRIVE with other computers/laptops?

  I think that you should do this because it might be an external HARD drive failure.

  Check it!

• External ISight not recognized under macOS Sierra

  Upgrade to Mac OS Sierra of El Capitan on my Mac Pro (mid 2010) and everything worked very well.  However, I noticed that Siri could not hear me through my external iSight connected via Firewire.

  Then I noticed that the green light is not on, and the iSight didn't work at all, or even acknowledged in the system preferences.

  Any ideas on how to make it work?

  See if resetting the SMC help > reset the management system (SCM) controller on your Mac - Apple Support

• 10.11.4 external drive not recognized

  I've recently updated to OS X 10.11.4; Since then, when you try to use Time Machine to back up my MacBook Air to Rikiki external hard drive connected via USB, I get an error message: "the backup drive is not available."  When I use the same exact disk to save my wife (MacBook Pro under OS X 10.11.3) machines, there is no problem in doing so.  My backup partition both his backup partition is visible.  Does anyone else have this problem?  Any ideas on how to solve it?  We must wait for the next version of the operating system?

  Thanks in advance.

  Reset the PRAM > NVRAM and PRAM

  If this does not help, reset the SMC > Macs with Intel processors: System management controller (SMC) reset

• Computer laptop 15-ac111TX: external monitor not recognized

  After completing the last HP updates, including a BIOS update computer restarted and now cannot recognize the external monitor. Have you tried another cable and monitor and video card setting never display monitors.

  Already tried a reinstall the video driver

  Hi @olliessbrown,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP ENVY laptop and problems with the HDMI does not properly. Try to use this update all the drivers who might not have are yet.

  Please let me know how it goes.

  Click the thumbs below to thank me for my efforts!

  Thank you.

• Toshiba 1 TB drive external DRIVE not recognized anymore

  Hello

  I recently bought a HARD Toshiba 1 TB drive that my Qosmio G50 now refuses to recognize.

  Anyone know if I would be able to open it and put the hard drive into one of these sata hdd docking stations I've seen announced?

  The hard drive contains about 500 GB of movies, etc.
  These I need access ASAP, so I don't want to go to the trouble of sending it back to the seller and expects a return, as well as all of the rigmarole that goes with it.

  Kind regards...

  Hello

  You can try to open the external HARD disk enclosure, but you shouldn't t forget that then you will lose the warranty.
  So think about it!

  In your case, I would like to send the HARD drive to a service provider authorized. Then you can fix.

  Data on the external HARD disk enclosure but normally should not be stored on the external HARD disk enclosure. I have my data stored on the laptop and an external HARD drive.

• TOSHIBA StorE Art 2 TB external hard drive not recognized by HP Elite /Win7

  I have a new HP Elite desktop computer running Windows 7 Home Edition:
  A few months ago, I bought a Toshiba Store Art HDD Ext 2 to, which until today has worked well. Today, I started the PC in the morning (with no updates of Windows or other software) to find that he would recognize is no longer the Toshiba hard drive. He always recognizes the WD drives and SimpleTech drives when they are plugged. All external drives are powered separately and do not rely on the power of USB.

  I tried the Art Store on other PC and it works fine. I tried to change the cables, the cable works on other players (and other cables will not do this work of Art store). I tried several ports USB 2 on the PC, with no luck * (but all the ports work with other readers).

  I try verified Drvivers of COMPUTERS and MANAGING disks. There is no sign of the disk (not defective disc), it is simply not there at all.

  I searched on the web - try a variety of techniques (disconnect the power PC) and much more. No luck.

  PC specifications are:
  Operating system
  MS Windows 7 Home Premium 32 bit SP1
  CENTRAL PROCESSING UNIT
  Intel Core i3 530 2.93 GHz 30 ° c.
  Technology of 32nm Clarkdale
  RAM
  3.00 GB Dual-Channel DDR3 @ 665 MHz (9-9-9-24)
  Motherboard
  MSI 2A9Ch (CPU 1) 38 ° C
  Graphics
  HP L1906 (1280x1024@60Hz)
  ATI Radeon HD 5450
  Hard drives
  488 GB Seagate ST3500418AS (SATA) 31 ° C
  Optical drives
  Device USB WD virtual CD 1110
  HP DVD-RAM GH60L
  Audio
  Realtek High Definition Audio

  Works well with all other readers. and it worked with Toshiba until this morning.

  Clues?

  Thank you

  I put t really know what can be the problem.
  If everything worked a few days previously, first try to make back the OS using System Restore tool just to see if this will help.

• External drive not recognized

  Hi all

  I unplugged a USB external drive for a few days of my Netgear RN102. Now, when I've reconnected, the Nas does not recognize the disc. The data is safe, if I connect the drive directly to a PC, I see all the folders and files.

  Is there a way to see the drive on the NAS without erasing it?

  Thank you

  Marcello

  Indicate your logs

  volume is dirty and 'force' flag is not set

  If you hang the external drive to your PC and fix you should be able to then reconnect to the NAS.

• External drive not recognized after Format using NTFS

  I tried to get an external hard drive to my NAS for a few hours now.

  The drive mounted in the past.

  I tried to format my drive USB 3.0 external Toshiba 5 TB using a Windows 10 PC to NTFS.

  Now when I plug the drive at the back USB port, it will not mount.

  Any ideas on how to get it to rise again.

  Thank you

  Hi McRob1,

  Let's close this message and continue the other that you started.

  Kind regards

  BrianL
  NETGEAR community team

• External memory not recognized

  Hello world

  I just want to clarify that I have read the previous posts on this and I'm still having a problem.  I just bought the "rocket" yesterday (07/04/09)

  Windows XP does not see my external memory chip.  I was back to the MTP to MSC.  While MSC, XP sees the "rocket" as a removable device with 4 GB of storage and DPW acknowledges as a "peripheral" (with a nice icon... lol) with 4 GB of storage.  In addition, WMP11 sees either Mode exactly the same way as the Windows one.

  The problem is that I bought two external memory chips and none appear anywhere (desktop or WMP11).  I have a PNY MicroSd (4 GB) and a PNY MicroSD (8 GB).  Also, just to be sure... the chip is loaded with plated connectors facing the back of the unit, correct?

  There is not yet any sync'd up music is not a matter of loading the MSC music and other music in MTP mode.  My firmware version is 01.01.07A.  I understand there's a 01.01.22. to update out now, but I don't him have not yet downloaded.

  Help, please!

  ~ Rich

  I had a lot of trouble when I had my initial microsdhc card. Make sure it is recessed in the case of the rocket, you fell with a click. When you eject it it will be as a button that is depressed when he is in a position, when you go to put it up (or disable) you feel he's going or down a little bit more before coming without the locking mechanism.

  Additionally, make sure that the cards are in the format. SDHC, it is recommended that FAT32 is used, see:

  http://Panasonic.jp/support/global/CS/SD/download/sd_formatter.html