my web cam on my acer aspireone stop working after I did system restore... How should I do

Similar Questions

• Windows Explorer has stopped working after I did a registry clean with C-Cleaner?

  Hi im using windows7 32 bit and I have been using my normal pc then C-Cleaner, I opened and I clicked on reg clean, but I didn't return so I tried to open the partition (D) stands at its opening do not and I get this message "Windows Explorer has stoped working.

  Note: All other partitions works very well & I also made an error checking

  Hello

  I suggest you to see link and check.

  Error: Windows Explorer has stopped working

  http://support.Microsoft.com/kb/2694911

  Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

• Evy HP dv7 - 7323cl: camera and a Microphone has stopped working after the upgrade to Windows 10

  Hello

  1. I updated my OS from 8.1 for Windows 10. Since then my camera and microphone work stopped.
  
  2. in addition, my model (HP Envy dv7 - 7323 cl) is a support drivers HP for windows 10? Because when I search for drivers on the Hp website and selecting my laptop model gives only two options to download the drivers for Windows 8 and 8.1.

  I don't know if windows 7 is a good idea?

  Thank you

  Mazhar

  Hello
  
  I found the problem. It wasn't on any Windows 10 or any driver.  I recently replaced my laptop screen and everything by replacing the technician missed a small plug to be inserted into the socket near the area of Webcam. And this is responsible for the functionality of microphone and webcam.
  
  Thank you!

• My iMessage has stopped working after the installation of Office, how can I fix?

  It's the first time that I've already posted a question on a forum so please be nice! I'm in the right place? I need help with my iMessage on my Macbook air. I installed Microsoft Office 365 personal and he stopped my iMessage don't work, no messages in or out. Any ideas? Should I give more details?

  What version of Mac OS X? (   . APPLE menu > about this Mac)

• Quark has stopped working after upgrading operating system

  Downloaded 10.11.2 El Capitan and now my Quark Express friggin crashes (Ver 10.1.0.1) advice?

  Thank you

  Tony

  Please download and install EtreCheck from http://etrecheck.com/

  Run it and post the report here.

• ConfigFree has stopped working, can't use system restore

  try using toshiba laptop wireless already installed cofigfree on computer, but does not work

  Hello

  Try to reinstall the Toshiba WiFi drivers and Toshiba value added package.

  Make sure the WiFi switch (if the model has one) is on - usually on the front or side of the laptop.

  Check with Toshiba support, their drivers online (update or reinstall) and their forums.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------

  After the foregoing:

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ==========================================

  Do not forget to re - install the latest Pack of the added value of Toshiba.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• IR remote stops working after that the system will switch to standby

  IR remote no longer works after that the computer goes to sleep.  I use Windows Media Center (Vista) to the TV and use the remote a lot.  The ONLY way to make it work is to restart the machine, which is a PITA.

  In the device, here is what is displayed Manager...

  Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)

  I tried uninstalling, reinstalling the driver, unpluging the receiver IR USB, displacement of ports, etc., the software MS difficulty he tried, but nothing works.  It allows to work all the time, but these last few months, you must restart the computer to operate the remote control.

  Any ideas?  Help, please.

  BTW, it is a HP Desktop Media machine, and the remote control is the standard HP remote given out with their machines.

  Here is the official Microsoft fix for error code 38:

  Code 38: Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory
  http://TechNet.Microsoft.com/en-us/library/cc772090%28WS.10%29.aspx

  Have you tried to deactivate "standby" and checked for the repetition of the problem with the IR remote?

  You can ask your question to the Media Center experts at the green button forum:

  http://thegreenbutton.com/

  Have a Word with the help of HP to see if they have a fix for the same.

• my cd dvd drive stop working after I did a factory restore how to fix?

  I have a sony vaio vgn-nw305f, I had to do a factory restore and now my work dosent cd/DVD, how can I solve this problem?

  I have a sony vaio vgn-nw305f, I had to do a factory restore and now my work dosent cd/DVD, how can I solve this problem?

  ====================================
  The following article might be worth a visit:

  (982116) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116
  (Windows XP / Windows Vista / Windows 7)
  (scroll down and expand the section: "Let me fix it myself")

• Acer w3-810: heating problem & touch stops working after a while.

  1 year warranty, 810, Acer w3 expired, the Tablet is showing heating questions now, close the camera back and after a while to the touch stops working, touch works fine on reboot and compressed is cold. When the Tablet is connected to a network to the touch stopped working earlier than when not connected.

  to solve this problem:-J' I reset the windows. which increased the length of time in which the touch works but always to the touch stops working after a while.

  I disassembled the Tablet and found that the part that is overheating is memory [h9tknnnbpdma].

  What shoul I do, what I need to change the digitizer, software or any better solution?

  resolved:

  the problem was solved when I disconnected the cables of the digitizer and then reconnected.

• Satellite Pro A200 - Webcam stop working after 10 to 15 minutes

  Hello

  I need help to solve this problem. I use the Satellite Pro A200 with Windows Vista. When I use my computer online my web cam stop working after and never restart again until my computer restarts.

  Please send me some suggentions how to solve this problem.

  Thank you [email protected]

  Hello

  How did you notice this problem? You get an error message or something else?

  It's really hard to say why this happens, but first I would try to update the driver for the webcam. You can get the latest version on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Install the latest version and try again.

  By the way: you run factory settings or you have installed your own version of Windows?

  Welcome them

• Predator G3120 stops working after one hour (exactly)

  Acer Predator G3120

  Windows 7 (64-bit)

  State of origin

  Stops working after one hour (very reproducible)

  Hello peoples,

  For more than two years now, I have an Acer Predator G3120 and I experienced a lot of pleasure from it. Three months or so, however, I can't keep the pc for more than an hour later. If I have all the programs running at the time where he spent an hour limit, my pc crashes and gives me a BSOD (mainly stopcode 0x000000f4). If I don't have any programs running, it will be impossible to open all my desktop shortcuts, and if I try to go to 'My Computer', explorer.exe stops working. ALT + ctrl + del will result in a black screen. I'm quite a greenie when it comes to things like these, but I am I supposed to do something with my SSD.

  Download the latest drivers did not work, however. Also, I'm sure that this doesn't have to do with malware, as I couldn't detect any with different scanners, and I put my pc back to factory settings (which makes it quite certain, that he doesn't have to do with any installed programs).

  At this point, I'm running out of options, and so any help would be most welcome.

  Thank you for reading,

  Skumawiki

  Once connected to your system, your position SSD is not serious.

  Try this:

  http://www.crucial.com/wcsstore/CrucialSAS/firmware/M4/070H/1-0-0-90-crucial-070h-07-00-SSD-firmware...

• Liquid E3 everything stops working after the start-up

  You don't know if the virus or something is broken, but when I turn on my phone, put the PIN code, and then I'm gutted by messages that Acer home stopped working and a lot more. The phone is useless then normally running. I tried to downgrade to older OS, but it did not work. Tried to reinstall, rooting, different but any recovery was denied by the operating system and now I don't know what to do. Can someone help me?

  you have to performa a reset, you will lose all your personal data :

  1. Press HIGH volume + button / stop (phone must be off to run)
  2. the first vibration, leave the power button / stop and hold the Volume UP key
  3. move the Volume selection up and choose Recovery by pressing volume DOWN
  4. android robot died, press power button / stop
  5. Press volume DOWN to move to "wipe data / factory reset".
  6. Press Volume UP to select "wipe data / factory reset".
  7. wait for the finished case
  8. select Reboot

• Windows has stopped working to save your system

  Everytime I use internet all of a sudden a blue screen appears with the number counting from 1 to 100 down and then restarts the system. It appears massages but I have an impossible to get it melts as quickly disappears. what I got multiple exercises, it is something like:

  Windows has stopped working to save your system; hardware and software to verify that the new installed are correctly installed; Disable caching or BIOS reprogramming...

  After a reboot, a dialog box appears with the text: windows has recovered from an unexpected shutdown. Windows will notify you if a solution is available.

  My exams are too close it please help me solve the problem.

  Thanks for helping me to solve the problem.

  I applied your suggestions, but the problem was intact. I got my system controlled by an expert and came to know that the RAM has a problem. I have replaced the RAM and now it's fine.

• Speakers stopped working after changing the device sound card

  * Original title: switched to hi-speed of dial-up, speakers stopped working / / rev. #2 Can I change the title of: speakers stopped working after changing the device sound card

  I have a Motorola SM56 speakerphone modem, I went from dial-up to the Road Runner.   When I open Device Manager and expand the sound column it lists "High definition Audio Device" (manufacturer of Microsoft), there are 4 that say "NVIDIA High Definition Audio" then there is one that says "Unimodem Half-Duplex Audio Device.  When I open the properties of the Unimodem device it says ' device working properly. "

  Let me start at the top under "General".  It lists the name of the device: Unimodem half-duplex Audio device.    Device type: audio, video and game controllers;    Manufacturer: Microsoft;    Location: Motorola SM56 Speakerphone modem.

  My speakers worked very well before I went.   I tried updating the driver but he came back with "best driver already installed.  It is a desktop PC, it is about 6 years old, but has been revised, graphics card new, updated to power, new 4 GB ram I think.  The hard drive is 1 TB.   I'm running Windows 7 Pro.  I forgot to mention, if I open a WMV file and volume in the taskbar commands, I see the green light moving.  The green light on the actual speakers turned on, just no sound.  It seems to me that the old speakers do not like the new modem from Time Warner. (I'm an old lady, what the devil I know)

  It is a question of another driver, or is it something else?

  Any help would be greatly appreciated.

  Are plug you the speakers into the modem?

  They must be connected in making your computer speaker, usually a light green color (read the manual of the machine). Go to control panel / sounds / playback and make sure that the type of speakers you selected as the default device.
  Audio device drivers updated its better to not use MS Update (it is not). Re-post giving your machine make name and exact model number (for example HP, Inspiron, ABC1234 etc.).
  See you soon,.
  Jerry

• Anyone Bitmoji keyboard stop working after updating iOs 10?

  Anyone Bitmoji keyboard stop working after updating iOs 10?

  jerseryjones4 wrote:

  Anyone Bitmoji keyboard stop working after updating iOs 10?

  Someone posted on another thread a tweet from Bitmoji they are currently declining, but working on the issue.