My webcam is built into my laptop, how do I go into the settings of webcam?

Similar Questions

• Satellite C650-197 built into the Microphone and Jacks does not

  As the title, I tried to use the microphone that comes built-in on this model (Web camera VGA integrated with built-in microphone) and found his does not work. I tried to plug in an external microphone via the microphone jack and still no registration.
  I can't seem to find the drivers for the integrated or plug anywhere.

  Any ideas?

  Hello

  > I can't can't find the drivers for the integrated or plug anywhere.
  This drivers don t exist. The sound card driver controls everything.
  I think you should first start the webcam software and should test the microphone because the internal MIC is part of the webcam.
  Webcam software provides a tab; settings and properties. In one of these tabs, you will find settings for the audio.
  Here, you can increase the volume of the microphone and was able to record a small audio session.

  In addition I recommend the settings in Control Panel-> sound.
  Make sure the microphone volume is set to maximum. Don't forget to check the hidden devices and disabled it there...

• Laptop HP 15-af157na: new laptop - how do I back up the operating system until I use?

  You just bought a laptop and PC World told me to back up the operating system before you start to use it on a pendrive of 32 GB, but because he wanted to sell their service, he refused to give me any indication on how where to start!  Should not be difficult.  Stupid how they do not include the cs as they did.

  Someone help please?

  Thanks for the comments.

  Glad to have been of help

  Feel free to post back. Please mark the thread/post as accepted solution to possibly help other users who search the forum for similar problems. Good day!

• Portege M400 does not accept the hard drive built into the boot password

  First I assigned a 9 character long password BIOS via the security utility help my new Toshiba Portege M400 (M400-139) with Windows XP Tablet Edition.
  He asked me if I also want to use the same password "repeated" to cover the 22 or so (I don't remember) characters long password of HDD, and I said ok.
  Then, I removed the BIOS password. But couln can't remove HARD drive password.

  I then created a different password which has been long 1 character and removed, but the HARD drive password remained.
  When I rebooted the system, he asked me the 'HARD Word built-in disk '.
  I tried to enter both the 9 and 1 character long passwords, but it says not 'certified '. What should I do?

  Should I write tha password over and over again, until it reaches 22 or more characters?
  If this is the problem, then, the number of characters long?
  I also think that the keyboard layout mapping can be a problem.

  I have never changed the setting page, but maybe that the default value of the plant is different from a windows.
  But I used only numbers and letters of international standard.

  I need immediate assistance.
  All my work is interrupted.

  I put t know if you have inserted the right HARD drive password or not but the non-certified message said that the inserted password is certainly not correct.
  Someone said that the message uncertified might if poster if you laptop was send hibernation instead of the stop mode mode after the password has been set.

  But I don t think that this could be relevant in your case.

  One question; have you tried to delete the password for HARD drive via the password of Toshiba or in the BIOS utility?

  Please check if you can edit/delete in the BIOS because I found the info in the manual M400 you must use the BIOS Setup to modify, delete the disk HARD ot password to set the password master HD!

  The manual also provide information if you forget the user Toshiba HARD drive password will not be able to help you and your HARD drive will be rendered completely and permanently unusable! When save the HARD drive password stop or restart the computer. If the computer is not shut down or restarted, the recorded data (password) cannot be correctly included!

  So maybe that's a reason why you can not change the HDD password?  :|

  Greetings

• My sister has problems on his laptop, how can I connect to the laptop with my labtop to help him with his computer problems? Thank you.

  My sister has problems on his laptop, how can I connect to laptop with my labtop to help her with her computer problems when I live several States away? Please help me if you know how to do this thank you.

  Suggest you use Team Viewer, free version.
  It is used here every day for several hours.

  Please see the links below for more details...
  http://www.TeamViewer.com/en/index.aspx
  http://www.TeamViewer.com/en/products/remotecontrol.aspx
  http://www.TeamViewer.com/en/help/cat15-remote-control.aspx

• How to avoid synchronization of the settings between two computers

  I have two computers (a desktop computer all-in-one DELL and HP laptop).  Log-in at once is my Microsoft account.

  PROBLEM: When I 'customize' screen on one, the same changes are made on the other.   It is not desirable.  How to avoid that, far from making a second Microsoft account?

  To clarify - the ICONS are not duplicated, just any changes made to the themes of office such as colors or backgrounds.

  Thanks in advance!

  Hello Beckinista,

  Thanks for posting your question on the Microsoft community.

  Thank you for your query details.

  I also like the fact you want to avoid synchronization of the settings between two computers.

  I suggest you stop the synchronization of all of the settings between two computers and check if it helps.

  Please see this link:
  Sync between multiple PCs with OneDrive settings
  http://Windows.Microsoft.com/en-us/Windows-8/sync-settings-PCs

  Note: Please see section "to stop all sync settings" in the article above.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• How to disable or change the settings of the fan check rpm at startup?

  Hi all...

  My system features:

  HP p6180t

  Prod #: AV129AV #ABA

  Processor Q9550

  8 GB RAM

  Card mother IPIEL-A3

  Updated:

  PSU Corsair HX650W

  ASUS GeForce GTX560

  My original processor cooling fan has stopped working recently and I chose to replace it with a heat sink better while I was home. I used a Cooler Master Gemini II M4 because it was the only cooler increased capacity that would fit in my current case.

  After the installation, I got the "error: CPU fan does not, the computer now shuts down to prevent damage to the CPU." Etc... »

  My guess is that the motherboard don't like the new fan supplied with the new heat sink. The fan is bigger and I am sure that laps at a RPM lower than the stock fan. I checked my BIOS settings and do NOT have the "Hardware Monitor" section under the "Advanced" tab My BIOS is a newer level than the HP site will provide updates (mine is):

  BIOS Version/Date American Megatrends Inc. 5.09, 19/08/2009).

  Is there another way to change the speed of the fan RPM to avoid the error at startup in the BIOS?

  I am able to start the computer by using similar fan size 4 pins on the motherboard, while the proper size fan (actually mounted on the radiator) is disconnected. Even with no fan, the new radiator keeps the processor to 45 C or less through all 4 cores under load average.

  I guess I could always leave this small fan plugged into the motherboard for the BIOS to be happy and to power the CPU fan off (with an additional case fan) molex power. That would be a last option because I rather know if my CPU fan does not work...

  Any help is much appreciated, thank you!

  John

  I understand that your new fan is not detected as work correctly by the BIOS.  The BIOS does not provide all that many options to control functions such as the speed of the fan, and it's not a way to access this function to the best of my knowledge.  I'm afraid that the workaround you mentioned may be your only option with the existing fan do not have access to this setting in the BIOS.

  You mentioned that you have connected a fan of similar size to ignore the error.  Is there a RPM higher than the fan at the top of the heat sink fan?  See the pictures here, it seems that the fan is detachable and can be replaced by the fan who works with the BIOS.  It comes as the fan who gets past the BIOS will fit the heatsink.

• I have built into the camera on the computer acer laptop how to fire an image & save it?

  How to take a photo & where are they saving?

  How to take a photo & where are they saving?

  You must install the required application that came with the webcam, if you don't have that, download and install from the manufacturer's website.
  Once done, open webcam application, you will find "capture photo" option, click it to capture, by default it saves the image in pictures.

• Windows 7 Ultimate, computer laptop Acer Aspire E15 built into the camera problem.

  I have a strange problem.

  I am running

  

  The laptop model is

  

  and first of all, as you can see - Acer only provides drivers for this model of laptop for windows 8, which is crazy because for ex I am running windows 7 on it or what do I do if I want to downgrade to windows XP, how to get drivers for my laptop?

  So my web cam driver was automatically installed with windows, BUT there is a problem.

  My camera only works with Skype and Firefox/Chrome.

  Skype recognizes it normally:

  

  but no other software can find and use the camera.
  

  

  webcam7 even after choosing the webcam as a source gives just a black screen:

  

  

  In addition to this, the windows software standard that normally comes with the windows called Camera - does not exist.

  The camera appears under devices.

  

  

  

  

  I tried to uninstall the driver. Install a new one. I tried everything I could find online, and nothing seems to work.

  It's almost a new laptop and it's crazy that I can't use such a common feature as the webcam.

  I'll send the same message to the customer of the Acers and see what is going, they say, but I reached a wall and do not know which can then do?

  TNX for taking the time to read this and any effort to help in the future :)

  Hello

  Please provide a detailed description of the issue with the screen shots.

  I certainly understand the inconvenience caused to you. However, I appreciate really all your efforts towards the resolution of the problem.

  In order to understand the issue more clearly, I'll ask you to provide me with the following information.

  1. You did it all hardware or software change on the computer?

  There could be a possibility that this issue would have occurred due to the damaged in the system device drivers.

  I want to provide you with the information that most Acer computers are preinstalled webcam application supplied by the manufacturer with the device. Uninstall and reinstall this application has helped many users of Acer for this problem to be solved.

  I suggest you follow the procedure recommended in the article given below for that matter Acer support.

  Webcam error message: camera not found

  http://Acer--UK.custhelp.com/app/answers/detail/A_ID/9909/~/webcam-error-message :-camera-not-found

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• How can I open my eye movement built into the camera in my sony vaio VGN58GN/C

  How can I open my built in camera motion eye on my sony vaio vgnsz58gn

  How to use the Motion Eye on Sony VAIO
  http://www.ehow.com/how_6939346_use-motion-eye-Sony-VAIO.html

• Microphone built into the laptop Samsung RF 511

  Hey all,.
  I've updated my laptop to windows 8 and everything worked without problems, but I met a snag trying to get my microphone to work. All the details on how I can get the microphone to work in my mobile Samsung RF511 with windows 8. I do not rely on this topic quite a fair bit. Thank you! :)

  I have the same laptop and this happened to me also.  The problem is when you upgraded, Windows by default your microphone to the Jack and not the microphone.  You have to go in your entourage, to change the default behavior, and it should work.

• How is the lighting built into the macbook pro 2015?

  Is it built on edge or backlit?  what they use to turn on the monitor?

  Thanks for the help guys

  Current on the retina of MacBook Pro's built-in display is an LCD with LED backlight. According to iFixit who regularly dismantle the new Macs, there's a row of 48 LEDs at the bottom of the screen.

  See https://www.ifixit.com/Teardown/MacBook+Pro+Retina+Display+Teardown/9493

  See http://www.apple.com/uk/mac/compare/

• built into the laptop, camera does not work

  Original title: Enhed

  Hello l have a portable acer. The problem is that my wecam inbuildt no longer works and l can't seem to find the problem. Please l need help

  Thank you thank you

  Hello

  Check with the Acer Support, their documentation and online drivers.

  Acer - USA - Service and support
  http://us.Acer.com/AC/en/us/content/support

  Acer - drivers and downloads
  http://us.Acer.com/AC/en/us/content/drivers

  Acer - worldwide
  http://www.Acer.com/worldwide/selection.html

  ============================

  Troubleshoot camera connection
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problems

  Vista references apply to Windows 7.

  You probably need to recharge the device drivers and any software control of the 'IF' camera, there is
  everything for Windows 7.

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Satellite A300 - built into the camera hangs

  Salvation;

  I have a problem on my laptop, built-in camera. After opening, using Yahoo messenger (webcam) or by Assistant camera camera software, in a few seconds, it crashes.
  I tried to check if the pilot does not work, he said that there was last updated. I also try to uninstall and re - install, same problem
  Which is wrong with this device? I just bought this laptop last month and gives me a problem. Can someone help me out here?

  Model: Satellite A300
  Part number: PSAG8E-05J00TEN
  Serial No.: 29452151Q

  Thank you!

  Hello

  I have Satellite A300 too and use cam with Skype. It works perfectly. I tested it with ICQ
  Have you tested the feature cam with another application?

  Also try disabling software pre-installed to Webcam Assistant (usually started automatically with Vista) and check the functionality with Yahoo.

• Turn off the music player built into the Droid 3?

  Hello. If I have a podcast in my Droid 3, the player built-in music play the podcast automatically file whenever it receives a stereo Bluetooth to my audio system automatically. I don't like the music player because there is no function "Resume Play" where I can pause the game, save the position and resume playing when I restart the music player later. My MP3 Clip + SanDisk player can do, but the most expensive Droid 3 with the built-in music player does not have this feature.

  In addition, if I have another podcatcher application, the integrated music player seems to prevail and will even play on the the third podcast player app, then you start to get several podcasts playing at the same time.

  No idea how to turn off the music permanently player? I of course can't uninstall it.

  Thanks in advance.