built into the laptop, camera does not work

Similar Questions

• My CD-ROM/DVD-Rom drive & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.

  My readers Optiarc DVD - RW AD-7530 ATA Device DVD/CD-ROM & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.
  Although of course, the CD-ROM drive worked during the upgrade.
  I noticed that when I turn firstly on the laptop, the last two lines of the front entry from Windows 7 are the following.
  PXE - E6i:Media Test Failure, Check Cable
  PXE - MOF: Exit PXE Rom
  During the audit of each Properties in Device Manager devices", I learned that they both work correctly.  In the list in the printers and the @Devices the only Webcam shown is also a "USB 2.0 Camera"
  Can someone help me please?
  Best regards
  John

  Besides what abdelhak says:

  The message of PXE boot that you receive when you start your computer has nothing to do with your CD/DVD-Rom drive. Your computer uses a PXE boot method to attempt to load Windows from a location on your network. Since you do not have this configuration, it is safe to ignore it. If it slows down the startup time of your system, contact your manufacturer and ask them for instructions on how to "disable PXE Network Boot of the BIOS.

  Hope this helps,

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to copy and paste into the search engine does not work?

  How to copy and paste into the search engine does not work?

  It should be.

  Restart your Mac and try again.

  Other than that, make sure that OS X is updated.

  Open the App Store, and then select the updates menu.

• Runs the command "regsvr32 quartz.dll" shows 0 x 80040154 error and the laptop webcam does not work

  Runs the command "regsvr32 quartz.dll" shows 0 x 80040154 error and the laptop webcam does not work

  Hello

  Thank you for your response.

  I appreciate that you have attached a screenshot of the problem.

  Have you tried troubleshooting of hardware and devices running?

  Please refer to the suggestions of Naman R responded on 1 April 2011 and check if that helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/DllRegisterServer-failed-with-error-code-0x8002801/403ee0d0-895B-E011-8dfc-68b599b31bf5

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  I hope this helps.

  Thank you

• (Redirected) Power adapter green light turns off when the laptop battery is plugged into the laptop and does not load.

  Power adapter green light turns off when the laptop battery is plugged into the laptop and will not charge; If the laptop battery is not plugged into the laptop adapter it's still green and will charge the laptop.

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Tip: when you post a message, preferable to always include the computer model.

  Bev.

• Built into the adapter Bluetooth does not

  Hello

  I got a laptop Inspiron for a few years now and recently had to make a new hard drive in it so had all the Softwear Windows re-installed by a professional etc. The built-in Bluetooth does not work however. I discovered that I need to install the driver and found the following on the Dell site. Will it be OK to install it on an Inspiron is probably 7 years.

  http://www.Dell.com/support/drivers/UK/en/19/DriverDetails?driverId=DK51N

  It is a company laptop so I don't want to do anything else. I'm not on any form of network or managed system, but do not want to bind WiFi I have printers at work.

  Can someone offer me some advice.

  Thank you

  Adam

  Hello Adam,.

  Please click here to download and install drivers for Inspiron 1545 Bluetooth.

  I hope this helps!

• Apps disappeared and the laptop settings does not work

  All my applications disappeared from Windows 8.1 in my user account, even if they are still there in the guest user account. I checked this forum and tried a lot of things that have been proposed by other users, but nothing has worked. I can't create a new account with administrator privileges, or refresh my laptop because the "change PC settings" does not work either. I already tried this: http://www.thewindowsclub.com/broken-change-pc-settings-link-windows-8-1

  And I just get the message «Deployment failed [...]» the system cannot find the file specified. "

  I think that this problem was caused by a virus, because it happened right after that my anti-virus kept warning repeatedly "threat detected". I followed the guidelines to remove malware etc.

  Hello

  Please consult the complete steps and after trying them, try the steps mentioned in the article in your query:

  http://www.kapilarya.com/fix-modern-apps-not-working-after-upgrading-to-Windows-8-1

  Moreover, if that fails, you can try to create a new user account from the control panel and see if the laptop settings works on it.

  Hope this helps, good luck :)

• The iSight camera does not work on my iMac 21,5 "

  I have a mid-2010 - iMac 21.5 ", running 10.10.5 with 16 GB of memory.  All of a sudden my iSight camera doesn't work.  The led next to it is a steady green.  What can I do to get back up & running?

  I just ran a ' reporting system and it shows that he has not found a camera.

  Hey Ronald,.

  Have a webcam of work is very important, that I use mine often so I wouldn't be happy if mine did not work.

  Some things that you can try are:

  • Restart the computer
  • Reset the management system (SCM) controller on your Mac.
  • How to reset the NVRAM on your Mac.
  • Test in a new user ( OS X Mountain Lion: create a new user account )

  If none of these steps resolve the problem, the computer should be examined by a service provider.

  I'm not one of these steps will solve the problem.

  See you soon.

• I am expierencing problems with my isight Camera on my MacBook Pro. Suddenly the video camera does not start (no green light on) FT or Photo Booth. The screen is black, if I restart computer it works but after closing the lid, it stops. V10.11.3

  I have problems with my view i camera on my Mac Book Pro. Suddenly the video camera does not work (no green light on) FT or Photo Booth. The screen is black, if I restart it, it works but after closing the lid it stops and I have to restart the computer.  I use V10.11.3. An idea about what is happening

  Hello mpm068,

  Thank you for using communities of Apple Support.

  Since your iSight webcam works up to the time that your Mac goes to sleep, I would like you to start please help desk trying to replicate this problem then to reboot in safe mode:

  1. Choose the Apple menu > shut down.

  2. After your Mac stops, wait 10 seconds, then press the power button.

  3. As soon as you hear the startup tone, hold down the SHIFT key.

     You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

  4. Release the SHIFT key when you see the gray Apple logo and progress indicator.

  To exit safe mode, restart your Mac, but no press during the startup.

  OS X El Capitan: start in safe mode

  Take care.

• Vista 64-bit now I changed my OS 32-bit now my web cam does not work, tried to get the drivers from dell but did not help

  of the vista 64-bit now, I changed my OS to Vista 32 bit , now my web cam does not work, tried to get the drivers from dell, but they are not available there. My laptop is studio-1537... Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  I check your firewall settings to see if it can cause a conflict with the season chat software.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After the replacement of my iPhone screen 6, front facing camera does not work.

  After the replacement of my iPhone screen 6, front facing camera does not work. The rear camera works fine, but when I switch to selfie cam I saw a still image of what was on the camera back; and on snapchat it simply refuses to move to selfie cam. I check to make sure that all connectors are deep-set. Any suggestions?

  If someone else that Apple will replace your screen they screwed up. If Apple has replaced your take screen back to the store.

• can't connect to my home internet income james ashley forgot it the link password does not work and the password I was given does not fit into the password box

  can't connect to my home internet income james ashley forgot it the link password does not work and the password I was given does not fit into the password box

  Are you sure that you do not have to register on this site through the usual way and what you should be used elsewhere on the site?

  Have you tried to contact them to help this topic or to check if they have a FAQ on this subject?

  I found this in another thread that you created [*]:

  I'm not sure do I bought a home income internet james ashley program and I copied the login info I was given and the password does not fit into the window of password and I forgot the link password does not work I sent emails, but do not receive an answer im don't know what to do is anyway you can help me to recover my info or help me change the password?

  I assume that you have downloaded and installed this program and need to use this password in this program or only you can use these data to download the program from the site james ashley?

• normal flash camera does not work after the update of Marshmallow to lenovo turned vibe

  after update of lenovo vibe turned 6.0 when open fash normal camera does not work and I can't do it open or closed or outomatic is disable

  but when open video camera flash is working and also with any another application to camera is working normally

  How can fix this?

  reset the camera settings after Flash open ligt

• I have a Toshiba satellite L455D laptop and the touch pad does not work

  If I plug my usb wireless mouse that works, but when I unplug it the touch pad does not work

  Have you checked to see if your laptop model has a physical button around the mouse pad that allows & turns off?  If it does not, many cell phones often have a software switch that can toggle the on & off power mouse pad.  It is usually triggered by a combination of function keys (key Fn + one of the F1 to F12 keys).

  Take a close look at the row of the top of your keyboard and see if you can find a key that has a small symbol that looks like a mouse pad.  If you find one, try pressing it in combination with your Fn key to see if your mouse pad features returns.

• the volume on my laptop lenovo does not work

  the volume on my laptop lenovo does not work, I ran the troubleshooting but he days my driver does not work properly, I have uninstalled/reinstalled but still have the same issue - no volume. everything I've tried has not worked. I can't put the volume up and down but always the same volume no matter what I try! Could someone please!

  Hello

  1. you receive an error message?

  2 did you change on your computer before this problem?

  3. what operating system is installed on your computer?

  What version of the operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  Follow the suggestions and see if it helps.

  Method 1

  You can follow the steps and see if it helps.

  (a) right click on the Volume icon in the Notification area.

  b) click on tab reading.

  (c) right click on the box empty.

  d) select Show disabled devices.

  e) right click speakers and select allow.

  f) right click on speakers and go to the Properties.

  g) select use this device from the use of the device.

  h) click apply and OK.

  Method 2

  If it was working fine before, you can restore the computer settings to a date where he worked very well earlier.

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  See also:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Sound cards: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/sound-cards-frequently-asked-questions

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems