My widows 7 trouble properties unathorised use computer name cannot delete files

Similar Questions

• We see disable my working group in the properties of my computer, we cannot run network in my office

  We see disable my working group in the properties of my computer, we cannot run network in my office

  Some things that can cause this:

  1. you are not logged in as administrator.

  2 - the Client for Microsoft Network is not installed Properties Control Panel/Network Connections/Local Area Network)

  3 - the workstation service is not running.

  John

• Cannot delete files and music always there but not display upward when I connect to the computer?

  Hi all

  Recently, I had a lot of problems with the music does not or don't play not I decided to delete all my e260 music and start again.  That's where the real problem started.

  For some reason I can't delete three of the albums on my player.  Each of the albums have what appear to be corrupted in them files. My computer does not recognize the file type and file extension is given so I don't know what they are.  Each file "appears" to 4 GB in size but that may not be appropriate for my e260 is obviously only 4 GB in size!

  Whenever I try to delete them I get an error message reading "cannot delete file: cannot read the source file or disc»

  I tried to update the firmware, reset e260 to factory default settings and made 'restore' thingy (where you hold registration and plug it into the computer, etc.) and these files are still there.

  After reading this thing of disk checking on this forum, I did this.  I was then able to remove two of the albums, but when I tried to delete the third album renamed 'a' and the damaged file shows 0 bytes in size, but I still can not remove.  However, I can move it to the folder music to any other folder.  I just can not remove!  When I do, I get an error message saying "cannot delete f: cannot find the file specified. '.  Be sure to only specify the path and the correct name.

  After all that I started my e260, and now I find that 2 other albums are always on it, even if they do not display any where when I connect it to the computer.  I can see and read these albums on the drive, and they seem well, they do not appear to be there when I plug it into the computer and look for them in windows Explorer.  The music folder is not hidden also.  These two albums are not part 3 albums that I could not remove, they are actually part of the new substance started sort of all these problems with the music does not and is not only now that they are the display upwards and play but are not appear when connected to the computer!

  I know it's probably not a lot of information but can someone tell me how to fix this?  If not, can I just format the * bleep * thing or I'll then have an e260 dead?

  See you soon,.

  PKFFW

  PS: Sorry for the long windedness of this post.

  Format will not remove the firmware, which is the operating system of the Sansa. It removes only the content that you have added. It will go back to what it was when it was new out of the box.

  MTP does not matter if you have never used it. The ghost album can be just a list remains in your database file. Nevertheless, we must get rid of this corrupt file, so Format is probably your best option.

  For what it's worth, to connect with the PSG, your computer needs Windows Media Player 10 or 11 is installed. XP comes with WMP 9, so he will not see the Sansa in MTP mode. unless you have updated.

• I use IE9 and cannot download files on Web sites. Is there a solution?

  I use IE9 and cannot download files on Web sites.  It allows me to locate the file, and then he says your file is downloaded, but just keeps spinning.

  This happens on several sites and when I call their tech support, I said that there is a problem with IE9. If I use another laptop with IE8, there is no problem.

  Open a browser window,

  Press the F12 key, then click browser mode,

  Click on ie8.

• is there a software program that I can use to recover of deleted files on my computer

  I have on my computer, the files that have been deleted and are no longer in my trash.  Is there a program or how can we recover these deleted files

  Try this. He got a good record if the files have not been replaced.
   
  Recuva
  http://www.Piriform.com/Recuva

• Using ThinkPad XP, cannot send files from mobile phone to the computer via Bluetooth

  Dear Sir, Miss

  I am using my computer (ThinkPad, Windows XP for the sounds played in my cell phone and sent via bluetooth to the computer. Apparently the functions of connection and the computer receives something from cell phone (the "Bluetooth connection status" window indicates that millions of bytes are received by the computer.
  However, I cannot hear anything in the computer and I don't see anyway to influence the volume or audio properties for direct information received by bluetooth to the speakers.

  Can someone explain what I would do to this topic?

  Thanks in advance for the help.

  Jacques

  

  Hi JacNasy,

  ·         Other sounds work well?

  Check to see if the following is useful.

  Method 1: Log the computer manufacturer's website and check to see if there is an update audio drivers. If so, download and then install to check the issue.

  Method 2: Try to set up the Bluetooth connection again and see if it helps.

  How to troubleshoot Bluetooth detection and connectivity issues in Windows XP Service Pack 2

• Help! Computer freezes, cannot transfer files.

  Hello, I just bought a 4 GB fuse.  I plug it into my computer and it happens that he is recolgnized, I can click to open the folder, but if I click to open the internal memory to add songs, the record freezes.  If I say that it open on rhapsody and try to drag and drop from my library, as he says, it freezes.  If I open windows 11 media and click on sync, it freezes.  The "rocket" connects to the computer, system says it's working properly, I've updated the firmware, but I am not able to put anything on it!  Any suggestions?  I've met the requirements, I am running WinXP SP3, Win Media Player 11 and I am connected via usb.  I don't know what I'm doing wrong.

  This problem has been resolved.  Is the USB port, I tried to use.  Once passed to another port it worked fine.

• I am facing problem in my laptop using the USB copy/delete files

  Dear Sir

  I am facing problem while using the USB in my lap top to delete/copy files

  Hello vasarao,

  What is the problem you are having?

  You receive error messages?

  Please provide us with more details and we will continue to solve this problem.

  Best regards

  Matthew_Ha

• Hosts the naming - how to use VMware name instead of file name

  Please see attached file.

  All hosts based on the same models appear under the same name in hosts. Is it possible to configure vFoglight to extract the vCenter appoint to the host instead of using the file name of the VMware disk for guests of actual spending?

  You are looking in the wrong place in the object model.

  Machine virtual VMWare is an extension of the host object model.  Think of the host as the base model by the dealer and the virtual machine as the base model with all the bells and whistles added to make a street racer.

  If you enter a virtual machine name in the top search bar, you will see that the returned results include objects of different types, probably a Machine virtual VMWare and a host.  Select the virtual machine VMWare will take you to the model object VMWare-specific screens.  Similar results for HyperV, etc..

  There is always a host record for each virtual machine, just as each car factory has the model of base somewhere.  He just won't have all the bells and whistles.

  Looking at your attachment, I think that what you see on the dashboard can be what you see in Virtual Center.  Virtual machines have a name that appears on the list of the Virtual Center, which can be separated from the real name assigned to the VM inside the operating system.  If you fix the naming in VC, I think you will find that the correction automatically flows to vFoglight.

• Cannot delete files using dreamweaver

  I've just updated a site to the latest version of PHP and MySql. I find that while I can download new files on the site, I can not delete existing files or new, using Dreamweaver CS6.

  Does anyone else have this problem?

  Howard Walker

  Have you tried with another FTP client?

  This sounds like a problem with permissions and ownership LINUX. Update PHP would not change the permissions and ownership, unless something happened during the process, such as the files have been moved to a different location.

  The way PHP is running affects permissions/ownership (DSO, CGI, suPHP etc), but even if this has changed, I don't think it would affect the permissions set on the files in your site.

• Cannot delete files from the external hard drive after copying using Robocopy

  Original title:! VERY DIFFICULT QUESTION! Files that cannot be deleted!

  I did a robocopy and he left during the night and when I came back it was in some kind of loop and my external hard drive was full. The files are not visible in Explorer and if I try to delete them in the command line that fails because some are too long. Urgent I need to redo the space on this external and copy the files to my parents and charity before fly me soon. Please can someone help me.

  * Looks like that I have multiple instances of the same files

  I don't know if you will be able to do this before your flight, but the drive must be partitioned and formatted, reformatted, or scanned for errors of NTFS file allocation table with repairs enabled. Depending on the size of the disk, this could take some time. You can also check statistics of SMARTDRIVE with a utility like Crystal Info disc to see if it is a failure.

  If you do not drive Professional recovery tools available, the native CHKDSK will do in a pinch.

  C:\Windows\System32>chkdsk /?
  Checks a disk and displays a status report.

  [CHKDSK [volume [[path] filename]]] [/ f] [/ v] [/ r] [/ x] [/ I] [/ c] [/ l [: size]] [/ b]

  volume Specifies the drive letter (followed by a colon),
  mount point or volume name.
  filename FAT/FAT32 only: Specifies the files to check for fragmentation.
  /F fixes errors on the disk.
  /V FAT/FAT32: displays the full path and the name of each file
  on the disk.
  On NTFS: Displays the eventual cleanup messages.
  /R Locates bad sectors and recovers readable information
  (implies / f).
  L:size NTFS only: changes the size of the logfile to the specified number
  of kilobytes.  If the size is not specified, displays currently
  size.
  /X force the volume to unmount it first if necessary.
  All open handles to the volume would then be invalid
  (implies / f).
  /I NTFS only: performs a less vigorous check of index entries.
  /C NTFS only: skips, checking of cycles within the folder
  structure.
  /B NTFS only: Re-evaluates bad clusters on the volume
  (implies / r)

  The /I or /C switch reduces the amount of time required to run Chkdsk by
  skip certain checks of the volume.

  Any routine review and car repair will take time. CHKDSK is no exception.

• Network: \\computer-name\ vs \\ip-address\ - access denied

  I'm having a problem to access a computer on my network via the ip address.  When I type in \\computer-name\ it will shoot to the top of my shared folders and all works fine.  However, when attempting to access the same computer through the local IP address via \\192.168.0.101\, he will shoot the same shared folder.  However, when you access this way, I can't further.  Whenever I try to open one of the files I get 'Windows cannot access \\192.168.0.101\Desktop.  You don't have the \\192.168.0.101\desktop access permissions.  Contact your network administrator to request access. "From my understanding, using \\computer-name\ and \\ip-address\ must be interchangeable from a local network.  Both computers are running windows 7 on the same workgroup.

  Any help on how I can get \\192.168.0.101\ to work would be greatly appreciated.

  Hello

  Do you have the same user accounts and passwords on all computers in the workgroup?

  Method 1:

  Disable any firewall and/or security software and check.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Note: Runs the computer without antivirus software or firewall is a potential threat to the computer; don't forget to activate the security software after completing the troubleshooting steps and after you have identified the problem.

  Method 2:

  Refer to the suggestion provided by Malkeleah, January 8, 2010, in the following link.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/you-do-not-have-permission-to-access-a-computer/14c9cf97-ac52-48bc-A730-284de284d353

• Why the processor info and his memory will not display on the properties of the computer.

  When I go into properties of the computer, the processor information and memory installed in not illustrated, the fields are empty or say no information available.   How can I fix it?   I can see the processor information using Device Manager.

  In addition, SYSTEM side is not displayed but I see when I select the tools and performance information.

  The computer seems to work fine otherwise, I just want to know how and why the information is not seen in the System Properties screen.

  If the system is stable and functional, I don't think anything really to worry about.

• Our version of Vista Ultimate is not authentic, how we improve our used computer is authentic?

  1. How can I make our version "authentic" on our desktop home computer? We do not plan on buying another used computer ever! Or should I say let someone else take advantage of us!
  2. Yes, whenever I 'boot' it prompts me to "activate now OR later" I was told to choose activate later... But since we launched this person out of our House, I can't ask for his help.
  I sincerely hope that 'Microsoft may help out me on this activation', we don't have any extra money to buy a new operating system or any updates at this time. I am eager to find even a part-time job in January, after the holidays. This computer could be used for this purpose.

  Happy holidays
  Thank you for your quick response,

  Chavela Hoss

  The key used here is the default key.

  You must change the product key to the one on the COA sticker on the case of the machine (or in the battery compartment), using the link change the key of product at the bottom of the system properties page.

  You may need to activate by phone.

• I bought a used computer, and now it says my copy of windows is not valid. Is it possible to make it valid?

  I bought a used computer, and now it says my windows are not valid. Is there anyway to find the product key for my windows program? Or make my windows valid without spending money? I'm a musician who was struggling.

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag tool
  (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please

  Please also state the Version and edition of Windows cited on your COA sticker (if you a) in the case of your machine (or inside the battery compartment), but does NOT quote the key on the sticker!
   http://www.Microsoft.com/howtotell/content.aspx?PG=COA