My windows 8 pro automatically disconnecting once I entered my password.

Similar Questions

• How can I get my email from windows live to automatically remove once downloaded in outlook

  How can I get my email from windows live to automatically remove once downloaded in outlook

  http://www.Microsoft.com/communities/newsgroups/en-us/default.aspx?DG=Microsoft.public.Windows.live.mail.desktop

  Discussions in Windows Live Mail Desktop

  They will help you in the above discussion group.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or try here:

  Outlook:

   

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

  http://answers.Microsoft.com/en-us/Office/ee861097.aspx

  Outlook Help Forums at the link above.

  They will help you with your Outlook questions when repost you in the Office Forums above.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Mail is automatically DELETED once read emails!

  Windows Mail is automatically emails from DELETION once seen... they disappear and are not in any other file deleted, junk, etc... How can I prevent this from happening.  This just started to happen this morning.  I have contacted my provider Cox Communications and they had me enter my Webmail online and there is a copy of each registered email.  They told me that the problem is not on their end that I need to contact Microsoft.  I know other people who use windows mail who encounter the same problem.  This actually started happening on an another desktop that I have both my husband and my side... and only my email has started doing this several weeks ago.  My laptop which is my main computer had no problem until this morning... now all my important emails that had been previously seen but not deleted are gone and I need to get back them on my Webmail system? How can I prevent this from happening and then I recover the missing emails?

  Go to the Inbox > view > current view > show all Messages.

  See you soon.

  Mick Murphy - Microsoft partner

• Dell Precision M4700 (Windows 7 pro) starts not once configured with UEFI and Secure Boot

  To all those who can help you:

  I got a Dell Precision M4700 and I update bios A05. I was intending to move to Windows 8. Everything was fine and the bios update was successful. I started the new bios under Windows 7 Professional (base OS) factory-installed and was very good.

  However, I can't get into the bios (not even see the POST from Dell or Logo) after I activate the UEFI and Secure Boot.This before I update to Windows 8 Pro. Now I'm stuck with a blank screen (same LCD not lit) and nothing to start. It's like a dead PC.

  Help, please. Is that what I can do or should I contact Dell Support for repair?

  Thank you

  I fixed it!  Just removed the CMOS battery, the BIOS got reset back to factory default.  So I did:

  (1) remove the battery

  (2) press the power button to the case of ground

  (3) remove the lower panel

  (4) disconnect the CMOS battery (it's tedious)

  (5) I hit the power button for some time (30 s) to clear the capacitors or something else, it was my theory, but I doubt it's necessary

  (6) use it to all back to the start

  When I turned it on it turns on and turns off several times before finally stay standing and I was then able to enter the BIOS and all the settings have been restored to factory default.  I am new to Windows 7 on my machine so I'll repeat the process, this time without disabling the legacy option roms!

  Here is the disassembly for precision M6700 and M4700 instruction manual if anyone needs:

  http://support.euro.Dell.com/support/eDOCS/systems/wsm6700/en/OM/om_en.PDF

  http://support.Dell.com/support/eDOCS/systems/wsm4700/en/OM/om_en.PDF

  I was talking about the Dell support problem and the guy said he would talk to his superior and see if something needs to be done, so I guess we'll see if something happens.

  I hope it works for you!

  Ben

• Windows 7 Pro - automatic update issues.

  I did a clean install of Windows 7 Pro (with SP1) a few days ago. The PC works perfectly, apart from the fact that Windows Update will simply not work.

  When I click on the "Check For Updates" button, it informs that it is looking for updates, but that she always looking. I left on for more than 24 hours, but he just keeps going until I stop and can't find updates.

  I ran the advocatus of Windows Update and also the difficulty of problems updating from the MS site, both without success. I also checked that MS .net Framework is installed (that is, version 4.6.01055)

  Can someone tell what could be the problem here? It's driving me crazy!

  Thanks for the update.

  When you have several updates to install, you won't after a clean installation, you should consider installing batch of 10 / 20 to avoid the scenario that an update causes all updates to fail. It also allows to connect to the internet using an ethernet cable and not wireless, which is significantly slower and less reliable.

• How can I connect to Windows XP Pro without using the user name and password?

  I received led optiplex 745 and they all two windows pro installed but I can't open windows pro because I don't have the previous user password.
  How to open windows pro without usin the previous username and password
  Help, please

  Unfortunately, we do not know if you are allowed access to the operating system or someone trying to hack illegally into.

• HP 2000 laptop: laptop of HP 2000 keeps disconnecting after having entered the password

  I got this laptop a few weeks ago and it worked fine, but then, weeks later, I type the password. So when I got was about to head on the desk, it somehow disconnected instantly. Then I type the password again, it just said 'Welcome' and vanishes in the background with the battery icon and wifi in the lower left corner. Doing so again, the background is blue, but the icons are still there. I restart the laptop, the same process. Any way I can stop this?

  @AssistNeeder553,

  Hello and thanks for the display on the HP support forums.  You'll need to do is start in safe mode and do a system restore to before this problem started.  An update has made a change in the configuration that is not sitting well or you have installed or updated something which that disliked the system.

  HP computers - using the Microsoft System Restore (Windows 8)

  Please let me know how things are going.

  Thanks again for posting and have a great day.

• On my iPad pro it asks me to enter my password for itunes 3 - 4 times a day

  On my iPad pro, it asks me to connect to itunes several times a day, how can I keep this from happening?

  I type my password and a few hours later, the same thing again. In the case of dozens of times a week. It is quite frustrating.

  It is certainly a device registered to my account, as I just used it to step 2 check my login information for this question.

  Any ideas are greatly appreciated.

  "Technology is great, until it is not."

  Tap Settings > iTunes and App Store > your Apple ID > review Apple ID and then add your password, and then click OK.

• How do I disable my account user, password in Windows 7 Pro

  I want to disable password on windows 7 Pro, I have no need of a password. The problem is that the program asks you to turn it off, the 'old' password that I do not have. How to get around this problem and be able to disable this feature.

  Welcome!

  Although the topic says How to disable my user account , I understand that you really mean How to remove my account password.

  I guess you automated your connection years process so that you do not need to enter a password. Fortunately, you can reset this password long since forgotten as follows:

  1. Click the start planet.
  2. Type cmd.exe in the search box.
  3. Press Ctrl + Shift + Enter
  4. Click on "Run as Administrator".
  5. Type the following command exactly:
     NET user "user %%nom" ' "{Enter}
     (this will reset your password for a white)
  6. Type the following command:
     Control UserPasswords2 {Enter}
  7. Check the box "users must enter a user name...". »
  8. Click on your account name.
  9. Uncheck "users must enter a user name...". »
  10. Click OK
  11. Leave the fields blank password and click OK.

  Don't forget to mark my reply as 'response '.

• Automatic updates_ recovery Windows XP Pro SP2 2002

  Automatic updates for Windows XP Pro 2002 SP2, could not continue, because of very limited use and only a few automatic updates, since 2004.

  Automatic update function is "ON" , but no link to the web page, or instruct except "version check the latest updated software".

  How to get automatic updates to get SP3 auto place a gradation, with a very powerful support of your date, please?

  You don't need Windows Update for Service Pack 3. I've provided a direct descendant.

  Where to download the SP3 Setup file:
  (The file is large but only installs the components required by your PC)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Steps to take before you install Windows XP Service Pack 3
  Recommend the steps to take before you install Windows XP Service Pack 3.
  Also includes troubleshooting information.
  http://support.Microsoft.com/kb/950717/en-us

  J W Stuart: http://www.pagestart.com

• How can I get Windows 7 Pro 32 bit automatically connect to drives mapped to the startup?

  How can I get Windows 7 Pro 32 bit automatically connect to drives mapped to the startup?

  Hello

  It should connect as much as the other computers with their car are on the account users are properly configured, security passwords are defined and firewall do not block.

  If the system is only yours and there is no need of local network security, enable the guest account on all computers, give them all the permissions and there will be less to worry about connection mapped, but local drive without security.

  PS Ce preceding is based on cable connections. If the connections are wireless, it's another story.

  Due to the maturity of the wireless adapter and their support through the OS, automatic connection could not occur.

  Wireless is great, but most of us try to sneak out of it the uses it was not designed for.

  -------------------------------
  My posts reflect my understanding and experience. It does not necessarily reflect the opinion or the vision of Microsoft, or anyone else.

• Help the clean installation of Windows 7 Pro and using the GPO to run automatic updates and restart all night

  I am trying to solve a problem that will probably require a new installation of Windows 7 Professional 64-bit. The grace period ends in 3 days, and the next 30 days are final exams at the College. I have 2 licenses (and product key) of Windows 7 Pro, but my drive HARD goes wrong and I don't want to use MAK activation. I will be eventually to replace the disk, but is now bad timing.

  If a reinstall is needed, I was going to ask if anyone knows how to set the strategy of perhaps a GPO where Windows is updated automatically in the background and after installing updates, 45 or 60 minutes, then restart. The goal would be to have a computer fully patched when I wake up in the morning.

  This is my plan:

  Install Windows 7 Pro SP1 64 bit > Windows automatically updated and plug the Ethernet cable > define a GPO where the computer waiting for 45 to 60 minutes after installation of updates (so the msi may end in the background, and I do not interrupt the installation) > the PC will restart > more update swill be downloaded and installed > wait due to the policy of GPO before reboot > Reboot > do it until it's over. > wake up with a PC fully patched 7-9 hours later.

  Is this a workable plan?, and if so, how do I define policies such as delay restarting, etc. to achieve?

  The reset did not work. It would be a simple solution. I have a valid license, but I don't want to replace the HARD drive until after final exams are over, so I'll reinstall and activate. I try to achieve in the next 24 hours, so it doesn't keep me from my school work.  I must also support and will then replace my files.

  Feel free to advanced used terminology. I have some experience.

  Any help is greatly appreciated!

  Another question: should I install a security suite before all updates being installed more than 12 hours, or wait until later? What is the level of risk?

  Anyone used Ninite to automate the installation of other programs? Is how safe it?

  Thank you!

  You will have to go on Support of Windows 7 forums on the following link to help solve your problem: http://social.technet.microsoft.com/Forums/en/category/w7itpro/

• Automatically refresh the content of the folders on the network on Windows 7 Pro x 64 drives

  Hello

  I use Windows 7 Pro x 64 and when I have someone, an application or a script delete/create a file on my network drive, I need to press F5 to see the changes in the file. I don't see files deleted/new in the folder even if I wait several hours. When I was with Windows XP SP3, I have never experienced anything like that.

  Is this a bug or there is a registry trick to solve this problem?

  Thank you

  Sébastien

  Oh, I think I found a solution on Google.

  It seems to work:

  I managed to solve the problem by resetting the folder views, -> view Explorer-> organize-> folder and search options and then click "Reset Folders".

  Source: http://social.technet.microsoft.com/Forums/windows/en-US/8afb8b65-900c-4f42-b1df-3c2394417b6e/windows-explorer-doesn ' t-refresh-when-movingdeleting

  I have more need your help!

  Thank you!

• Why are my automatic messages deleting, how can I stop the direct e-mail window auto deleing my email once it has been read.

  How can I stop the direct e-mail window auto deleing my email once it has been read.

  How can I stop the direct e-mail window auto deleing my email once it has been read.

   
  They are not deleted.  While in the Inbox: see tab | Message Filter button. Check to show all Messages, not Hide the Read Messages.
   
  Windows Live Mail help is in this forum
  http://answers.Microsoft.com/en-us/windowslive/Forum/LIVEmail?tab=all
   

• New installation fails during the expansion of the files Windows 7 Pro

  Recently, I built a new computer after my old man died. I installed Windows 7 Pro, I had on the old system. Everything worked well for about a month. Then I started having various errors, some suggesting a memory error. I ran several times using the most comprehensive parameters of memtest and no problem not found. Further inspection, I discovered that a critical system update was applied just before that the problems started. I decided to roll back the change. It does not solve the problem. I tried to do a system repair. That did not work. She only had basic as IE11 and Skype applications. I had also installed the utilities for the motherboard and graphics card. So, I decided to do a clean install. Each time, it fails during the expansion of the files. The error message is, "Windows cannot install required files. The file may be corrupted or missing. Make sure all files required for installation are available, and restart the installation. "Error code: 0 x 80070570." He gets up to 30% each time. I tried to install for a V300 Kingston SSD (120GB). I also tried another SATA II HDD (750 GB) with the same problems. I downloaded a new ISO and tried to install from that. Yet once, it is not at the same point. I noticed that whenever it creates a partition system reserved 100 MB which is almost full. At one point, I got a message saying that there are about 8 000 MB of free space. (I think that was all trying to manually unzip the files by a tip I found online). I found several suggestions for similar problems, but the solutions proposed did not help. I'm sure it will be a simple solution, but I'm out of ideas. Any help would be appreciated.

  Motherboard: MSI MPower Max
  CPU: Intel i7 - 4770 K 3.5 GHz (not overclocked)
  RAM: Crucial Ballistix Sport 16G (2x8G) DDR3 - 1600 MHz
  SSD: Kingston SSDNow V300 Series 120 GB (no special driver needed)
  HARD drive: Seagate 750 G 7200 RPM SATA II
  Video: EVGA GeForce GT 2 640 GB
  Case: Corsair 400R
  Power supply: Corsair TX650M
  CPU cooler: H80i
  DVD: HP, BluRay BD R/W drive
  OS: Windows 7 Professional 64-bit upgrade (the old computer was an XP update)
  CPU Temp is around 42 C.

  If Memtest86 fails then you need to get into the BIOS and set the RAM timing.  Memtest86 + displays the calendar then use the value displayed and compare to the real specs for your memory.  Also, you may need to increase the voltage to the RAM (in BIOS) place a small amount.

  As regards the function of Intel EIST, let her enabled for now. Then enable it after installing Windows successfully.

  =============================================================

  It's the set of test utilities that I use on every new system that I'm building.

  Note: If you are OverClocking or use an automatic overclocking or BIOS power saving features, start by disabling: Intel EIST, Turbo Mode, Cool and pretty and fall back to the speed of stock as a starting point.

  Disconnect any other (additional) internal hard drives and external USB devices.
  Look for any loose hard drive power or cables SATA, graphics card or other power cables.

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), so no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test:
  If you do not know your readers of the brand and model, try "Speccy",.
  It provides information from the computer/system in detail:
  OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
  Note: Option RAM indicates number of slots, DRAM Timing.
  Works your memory speed (frequency). The nominal frequency of your memory.
  http://www.Piriform.com/Speccy

  Test your player - create a Bootable CD:
  Ranging from 5 to 25% (depending on the make and model) new hard disks are defective.
  Note: Reliability of HDD sank medium over the past 18 months.

  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors.
  SeaTools for information: http://www.seagate.com/support/downloads/seatools/
  SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
  SeaTools for DOS download:
  http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm

  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who believe that having a brand Toshiba Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities

  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/

  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  ============================ SSD Test Software =============================

  Intel® drive SSD Toolbox
  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18455

  Life of the SSD: http://ssd-life.com/

  OCZ Toolbox: http://ocz.com/consumer/download/firmware

  SanDisk SSD Toolkit: http://kb.sandisk.com/app/answers/detail/a_id/9328/

  = Once Windows installed =.

  Device drivers: have you installed latest drivers from device of the manufacture of the motherboard?
  Check their support site for the latest drivers as the CD that came with the computer
  or motherboard may be older and less stable drivers.

  Visit the download of the manufacture of the graphics card:
  Download and install the most recent Windows 7 or 8 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index.aspx?lang=en-us

  See also the test of 'Smoke box' Nvidia or other demos: http://www.nvidia.com/object/cool_stuff.html#/demos
  or equivalent ATI.

  Prime 95:
  http://www.Mersenne.org/freesoft/
  It's a stand alone .exe file contained in an archive .zip.
  Simply choose to run the 'stress test' option for 8 hours or more.
  If your PC can pass this test, your memory and CPU
  are very good (close the housing cover in order to maintain adequate ventilation)

  Core Temp:
  The temperature of each core of the processor.
  Note: For the overclockers using stock radiator and cooling fan Intel/AMD you can expect
  a range of 35 to 40 at idle and 60 to 65 C max temperature when running Prime95.
  http://www.alcpu.com/CoreTemp/

  CPU-ID (CPUZ): http://www.cpuid.com/cpuz.php
  Watch the clock speed of the CPU under various conditions of loading
  (when using speed step technology Intel EIST).
  #1 Note:
  CPU - ID has two tabs - tab 'Memory' that shows the actual speed of the memory
  and the "SPD" tab shows the nominal speeds for each memory location that is filled.
  #2 Note:
  COMPARE the two values, the actual speed of the memory must not exceed the rated speed of your memory.

  CPUID HWMonitor: Hardware program that reads the sensors of health main PC monitoring systems.
  voltages, temperatures, fans speed.
  http://www.CPUID.com/HWMonitor.php

  Test of Stress of FurMark GPU (graphics card):
  http://www.oZone3D.NET/benchmarks/fur/

  Pass marks burn in test: http://www.passmark.com/
  Burnin test, and their test bench at the same time give a good workout from all the major parts of Windows.

  HD Tune:
  Provides information of the car and has an option (tab scan error) to test your drive.
  http://www.hdtune.com/

  CrystalDiskInfo:
  http://CrystalMark.info/software/index-e.html
  User Manual: http://crystalmark.info/software/CrystalDiskInfo/manual-en/
  Monitoring the State of health and the temperature. Solid State Drives brackets (value of the software).

  SpeedFan:
  Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
  It displays your drives model number and compares your drive with other discs of the same brand and model.
  Note: Unfortunately now includes a lot of bloatware, be very careful when installing remove bloatware.
  http://www.almico.com/SpeedFan.php

  GPU - Z:
  A utility light, designed for you give information about your video card and GPU.
  http://www.techpowerup.com/GPUZ/

  PC WIZARD:
  A powerful utility designed especially for detection of hardware, also analyses more.
  He is able to identify a large scale of system components and supports the latest technologies
  and standards.
  http://www.CPUID.com/pcwizard.php

  J W Stuart: http://www.pagestart.com