my windows have suddenly restarted and showing your finished page

Similar Questions

• Booted XP went into the mode options regurly of open windows, or knowledge last configuration or safe mode. No matter what I choose, keeps restart and return to this page

  Original title: frozen configuration page

  My laptop running windows xp pro was fine, when I went to bed last night, but this morning I woke and went to use the lt and it started as usual but then in a mode options regurly windows open or to last working configuration, or 3 safe mode options. And no matter what I choose, it keeps restart and return to this page and has continually repeated the same steps over and over again... someone can please help me with this?

  It seems that your XP hangs for some reason any...

  Why do we know almost nothing about your system (except a laptop with XP Pro)?  I know this isn't your fault...

  Please answer these questions and to implement the following:

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  If there is a problem starting, XP is configured to automatically try to start again and you can stuck in a loop not being able to go beyond the screen boot options, or none of these startup options you choose will work only.

  Sometimes, when XP has a problem starting or falls down and tries to start again, it will give you a "short" menu of boot options and none of them will appear to be good to get your system going again.  You have tried them all!

  The options are similar to the Advanced Boot Options menu XP, but the only option that you need (disable automatic error system reboot) are not offered, because XP went too far during the boot process and offers a limited number of boot options.

  If this is the case, you must call Options menu advanced boot yourself until you do not see the option:

  Disable the automatic restart in the event of system failure

  When you get the XP Advanced Options correct start menu you want to see, he has options on it like these:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Enable Boot logging
  Enable VGA mode
  Last good Configuration known (your most recent settings that worked)
  Directory Services Restore Mode (Windows domain controllers only)
  Debug mode
  Disable the automatic restart in the event of system failure

  Start Windows normally
  Reset
  Return to OS Choices Menu

  You need to choose in this menu is the option:

  Disable the automatic restart in the event of system failure
  
  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start tapping the F8 key with more urgency (earlier and more frequently) until you see disable automatic restart on system failure, and then select.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  If your system has a Blue Screen of Death (BSOD), we need to know what the screen says:

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If it looks like there is some kind of name listed in the STOP message file, send this line also.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.

  Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.

• Constantly, the computer restarts and shows loading updated 3 or 3 then restart screen.

  Constantly, the computer restarts and shows loading updated 3 or 3 then restart screen.  I've tried corrections on support, but nothing works.  Cannot restore previous point form will not work.  Build 6001 of Windows Vista Home Premium service pack 1.  Last updated who worked at April 15, 2011.  Update that keeps restarting on April 28, 2011.  64-bit operating system.  Intel Core 2 Duo E8500 3.16 GHz.  Antivirus Norton 360 Version 4.3.0.5

  Assuming that Win7 64-bit or Vista 64-bit...

  See this discussion: http://answers.microsoft.com/thread/cac55bf2-e271-e011-8dfc-68b599b31bf5 (which now includes a countless number of threads merged to confuse you more).

• All the pdf I downloaded on my desktop (Windows 7) suddenly "disappeared" and I can open and view, but cannot remove them or move them to another file.  When I try to delete, I get a messge saying my trial has expired and he wants me to have

  All of the pdf files I've downloaded on my desktop (Windows 7) suddenly "disappeared."  I can open and view them, but cannot remove them or move them to another file.  When I try to delete, I get a message saying my trial has expired and he wants me to buy which I can't do because I don't have a serial number to put in. What happened to the "free" Adobe Reader I thought I had?  How can I get these PDF files to become mobile?

  You (or someone) downloaded the free demo of Acrobat Pro, a little more than a month. If you use this software $20 / free months instead of drive for a month. If you don't want to buy it, now you must uninstall it and go back to the use of Acrobat Reader.

• Updated to XP SP3, get the error "Windows 8 Installation failed" and shows "Failed during installation install.wim"

  I constantly get this error when you try to install Win 8 on XP (SP3). He gets 47% full, and died with the newspaper showing:

  : Error ApplyWIMCallback CONX application C:\$WINDOWS.~BT\Sources\Windows.NEW\Windows\assembly\NativeImages_v4.0.30319_32\System.Xml\9ba07396ae369d010c5c3927a82ef426\System.Xml.ni.dll. RULE [605] [gle = 0x0000025d]
  Failed error when installing install.wim CONX. Error: 0x8007025D [gle = 0x0000025d]

  I did all the things that have been proposed in other posts:
  -removed the virus checker
  -installed any software encryption
  -no special disc running utilities
  -Windows Update
  -run the command chkdsk
  -clean boot (all the services package disabled).

  Any suggestions as to what I can try?

  Boot from the DVD Windows 8
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 8 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• 13 9333 XPS - Windows 10: sudden, random and irrevocably stops audio output

  The subject said. Audio driver for Windows 10, XPS 13 9333 buggy from the beginning! I had to reboot several times a week to "reactivate the sound." Errors are two complete sound driver crashes (the speaker symbol turns red and Windows 10 offers to try to solve the problem - well, of course that does nothing...), but now also this:

  At random intervals sound just stops. The volume can still be controlled, I do not see an error in the Windows event log (but I don't know I looked everywhere), Manager of devices for Realtek High Definition Audio shows the driver as work. I hear a brief 1/10th of a second loud white noise sound stops and that's it. I have to restart.

  UPDATE - solved:

  I reinstalled the CHIPSET DRIVER too and after the following restarts his is back.

  Thanks to a tip in this forum here that says "drivers installation order can be important."

• Problems with Windows Installer - installer stops and shows the dialog on the command prompts

  Hello

  I hope someone can help me with this question... I looked long and seriously, and you have tried all of the suggestions posted (cancel/save, etc.).

  I am trying to install a program and Windows Installer stops right in the middle of installation and a dialog box appears with information from command line, and the only thing I can do is select 'ok'... the program is not installed.

  Here is the info that appears in the dialog box:

  Windows® Installer. V 5.0.7601.17514

  msiexec/option [optional parameter]

  Installation options
   
  Installs or configures a product
  /a
  Administrative installation - installs a product on the network
  /j [/t ] [/g ]
  Publishes a product - m for all users, allows the current user
   
  Uninstalls the product
  Display options
  / quiet
  Quiet mode, no user interaction
  / passive
  Automatic mode - only progress bar
  / q [n | b | r | f]
  Sets the user interface level
  n no user interface
  b Basic UI
  r reduced UI
  f-full UI (default)
  / Help
  Help information
  Restart options
  /norestart
  Do not restart after the installation is complete
  /promptrestart
  Prompts the user to restart if necessary
  /forcerestart
  Always restarts the computer after installation
  Logging options
  / l [I | w | e | a | r | u | c | m | o | p | v | x | + |. | *]
  i status messages
  w warnings recoverable
  e-all error messages
  a startup of actions
  r registers of the specific action of the
  u user requests
  c initial UI parameters
  m out-of-memory or fatal exit information
  o disk out-of-space messages
  p - Terminal properties
  v performance
  x extra debugging information
  + - Add to the existing log file
  ! -Flush each line in the log
  * - Log all information, except the x and v options
  / log
  Equivalent of / l *.
  Update options
  / Update [; Update2.msp]
  Apply updates
  / uninstall [; Update2.msp] / package
  Remove the updates of a product
  Repair options
  /f [p | e | c | m | s | o | d | a | u: v]
  Repairs a product
  p only if the file is missing
  o If the file is missing or an earlier version is installed (by default)
  e If the file is missing or an equal or higher version is installed
  d if the file is missing or a different version is installed
  c If the file is missing or checksum does not match the calculated value
  has all the files to reinstall the forces
  u all (default) user-specific registry entries
  m all requirements (by default) computer-specific registry entries
  s all (default) shortcuts
  v-runs from source and recaches local package
  Setting public properties
  [PROPERTY = PropertyValue]

  Consult the SDK Windows® install to get additional documentation on the
  command line syntax.

  Copyright © Microsoft Corporation. All rights reserved.
  Portions of this software are based in part on the work of the Independent JPEG Group.

  I hope someone has a suggestion for this problem... I just bought a new laptop and Windows 7 Professional came installed on it.

  Thank you

  Linney thanks for your response!

  The file I'm trying to install is an exe file (so the SIG file is embedded in the exe file).

  I tried the option "Run As Administrator" and it did not work.  However, you gave me an idea that has provided a work around that allowed me to install the program.

  Once this dialog box is displayed with all the control switches, rather than press 'OK', I left on the screen and went in the 'temp' folder and find the MSI program I tried to install (I cross referenced the timestamp of when I tried to install it to find).

  Once I found the updated file, I clicked it, and he proceeded to install the program... I have not had any other problems with the installation.

  So, there's something wrong with the way that the exe file have been created and how the files extracted from the msi file (these are files of Intel and Lenovo - driver updates - so I think they do these things) or there is a problem with Windows Installer.

  For now, at least, I have a work around I use until I find a solution to this problem of permanent

  Thanks for your help and for taking the time to answer!

  I hope this can help someone else in the future

• El Capitan Bootcamp disk partitioning suddenly restart and lost as Partition

  Hi all

  MacBook Air 11 '' mid 2012 SSD 128 Gb

  I try to install Win 10 x 64 Enterprise,

  Free space already more than 50 GB,.

  All Driver and Win10 already created using boot camp, USB key

  When the disk partitioning Bootcamp suddenly restart the OSX (I press power button / stop)

  After when the rear I check free space of > 50 Gb for only 23 GB,.

  diskutil list result:

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage Macintosh HD 120.5 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  / dev/disk1 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD GB + 88.1 disk1

  Logical volume on disk0s2

  D9DF129D-6E60-4479-BC67-C9A1336F982B

  Unlocked encrypted

  GPT Fdisk

  Command (? for help): p

  Disk/dev/rdisk0: 236978176 sectors, GiB 113.0

  Logical sector size: 512 bytes

  Identifier (GUID) of disc: 8B19BAA5-8CA4-4C9C-93D0-BE5F70791625

  Partition table contains up to 128 entries

  First usable sector is 34, last usable area is 236978142

  The partitions will be aligned with the boundaries of sector 8

  Total free space is 13 areas (6.5 KiB)

  Starting number (sector) end (sector), Code name of size

  409639 40 1 200.0 of MiB EF00 EFI system partition

  2 409640 235708599 112.2 giB AF05 Macintosh HD

  3 235708600 236978135 619.9 MiB AB00 Recovery HD

  Command (? for help):

  ---------------------------------------------------------

  I try to use GPT Fdisk only show the Partition 3

  already, try using Testdisk but cannot write lost sector said "write error for Protection.

  Is there a solution to recover lost Partition?

  Please after the release of

  Cs diskutil list

• Can I have a face and not connected to pages in a document?

  I'm putting together a booklet with gaps of 11 x 17 - some of them will be two pages 8.5 x 11 face-to-face, but others will be a single image of 11 x 17 and would be better to consider them as a page. We will produce a hard copy and an electronic version. The hastily sketched image below shows what I'm looking for. In the PDF version, the pages would be directed as indicated. In the booklet, the large images would rotate to fit into the booklet 8.5 x 11 and given the style of the main page.

  This is something I can accomplish in an InDesign document, or will I need to produce separate versions for printing & digital editions?

  Thank you!!

  

  For the print edition I set up like a regular 8.5 x 11 facing files pages and make rotate the view of the spread for the pages that you need to see like 11 x 17 vertical, but you're going to need a second PDF for the electronic version if you want to export pasta to spread. I would give export to PDF (Interactive), a test - spreads is the default and turn the occasional page in Acrobat before distribution. That will give you spreads for everything, though, if you want to have individual 8.5 x 11 pages, so you'll need to export multiple PDFs, specifying ranges, with gaps selected or deselected, and then combine everything in a single PDF file in Acrobat for distribution.

• Why dose my window have a gap and will not drag down or up to the screen adjustment?

  my window has a gap, that departure is at the bottom, but there is a gap and I can't drag it to get it to connect. And when I try to get the mouse to go to the

  First, I have a very difficult time for the mouse it my mouse bounces up and down. And the dose of window left adjustment right upstairs downstairs.
  I'm going nuts help me please thanks Aja'

  Hello

  Were there any changes made to your computer before this problem?

  To change the display settings, you can try the following steps.

  Method 1:

  Graphics card:
  
  You can uninstall and reinstall the graphics card. To do
   
  1. click on start and then run.
   
  2 type devmgmt.msc, and then press ENTER.
   
  3. the Device Manager will open and you will see graphics card listed.
   
  4. right click on the graphics card and click on uninstall.
   
  5 restart the computer.

  Method 2:
   
  See the link below.

  How to change the appearance of items on the desktop in Windows XP
   
  http://support.Microsoft.com/kb/310543

  Method 3:

  You can also download and install the latest drivers for your site of manufacturers of computer or on the web site of display adapter manufacturers.

  Method 4:
   
  You can try to restore your computer to an earlier point in time when it was working fine. To do this, you can follow the article below:
   
  http://support.Microsoft.com/kb/306084
   
  Please read the article before proceeding with the restoration of the system.

  Hope this information is useful.

• Windows 7 suddenly slow and System Idle process CPU utilization a concern

  Almost overnight, my Sony Vaio with Windows 7 (bought in 2010) has worked incredibly slow.  I tried to update the computer with the automatic updates of Windows and the Service Pack 1 could not install many times.  So, I installed the system update readiness tool.  Then I tried to install the SP again and it worked (I was also able to install SP2 and other updates at this point).  But, these downloads and installations took longer than they should have and my computer continues to lag when I'm trying to do something.  Norton AntiVirus found no problem.  I've only used about 20 percent of the memory.  System Idle Process is using high CPU, even when I try to use other programs such as IE and Google Chrome.  The computer fans work diligently as if the computer tries to run, but everything is going so slow that the computer is almost useless.

  The computer is almost three years old, but did not have something else installed Norton because I bought the new computer.  It has been used daily for almost three years without problem.  I do a lot but check Windows Live Mail, and then type the documents in Word format - literally that's all; no other programs, games, etc.  However, I have an error code a few months back: 'Not authentic Windows, Build 7600.'  In response to the error, I got my product key and verified the program and to use new Windows 7.
  Anyone know why the system idle process continues to consume so much CPU even when I try to open a web browser?  Even when the computer is inactive, the fans are running full speed and the computer becomes warm to the touch.  It seems that no matter what the computer is doing, it is lagging behind and struggling.  Even if I just want to open the start menu, it takes a few seconds for the computer to respond.
  Thank you!

  It is not dust but the crapware that you must get rid.  The first suspect is Norton, which is a terrible software that slows down terribly computers.  Get rid of Norton and install Comodo Internet Security instead.  Make sure that when you get rid of the plague of Norton, you get the Norton Removal tool and run twice.  Also, make sure that manually enter you your folder program files and delete all Norton and Symantec files and use a program like Malwarebytes file Assassin to get rid of the persistent process who do not want to delete.

  Then use CCleaner (and ONLY CCleaner - do not download or install any other system cleaners or registry mechanic) for cleaning your system and use Revo Uninstaller to remove any extra crapware that is installed on your machine.  Be sure to remove any software from Apple and get rid of all Windows Live software.

  Finally, you'll want to disable several Windows processes that eat up RAM unnecessarily.  These include Sync Windows, Windows Defender and Windows Action Center.

  Follow all the advice and you should find that your computer is running a lot faster.

• My msn (homepage) arrives... .canot be dealt with at the moment and shows a blank page. It started about 10 days ago. Nothing has been added/changed on the copmputer. Vista operating system

  My msn now empty poster with the wordersa (home page) "application cannot be processed at this time, try again later.  This has happened for about ten days.

  You could try a system restore:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  Or:

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/threads

  They will help you with your question in the Forum of Internet Explorer above.

  See you soon. Mick Murphy - Microsoft partner

• Have a dialog box showing when the page is to submit.

  Hello
  
  I am developing an application that downloads an excel spreadsheet records and I have the basic functionality of this work. The problem is when the user clicks on the button transfer the application runs in the background and may take awhile to download records. What I want to do is when the user clicks this button I would a dialogue to say download or something and that its download finished files the dialog disappears and directs the user to the next page.
  
  I'm sure I've seen an example of this somewhere but I'm not having any joy trying to find.
  
  Forge, should I use Ajax or use jQuery to achieve?
  
  Thank you
  Paul.

  Hi Paul,.

  You can get this feature. I put an example of apex.oracle.com which you can take a look at Application is called app download - 29208. On page 1 if you press submit, you will see the icon flash on the screen treatment. You will need to download the gile processing3.gif from shared images, if you want to use in your application.

  EDIDEV workspace
  USER username
  password jadohi

  Concerning

  Paul

• my computer starts shows windows xp then restarts around back and does not completely load. Disks hard my are dead? Can not even go in safe mode.

  I have sony vio computer of 8 years, os is xp. It was off and I have to restart and it started in a loop.  Starts booting and then display the "xp" logo and then the screen looks like it lights up then goes back to the start screen, then back to xp logo and it never loads to the bone.  can't go in safe mode or anything.

  Thanks for writing again for me.  This morning I used my f10 key and brought my computer back to original data.  It's all good now.
  Thank you once again.

  Hi falowme57,

  ·         You get the error message?

  ·         What happens when you try to start in safe mode?

  ·         Have you made changes on the computer before this problem?

  Follow these methods.

  Method 1: Disconnect all external devices such as printer, scanner, etc.

  Method 2: Disable the option of automatic restart under advanced boot options.

  http://support.Microsoft.com/kb/307973

  Method 3: See the article.

  http://support.Microsoft.com/kb/314503

  Reply back with the results.

• I received an e-mail which I can't open or delete? When I try to remove it, a bulletin board is telling me that Windows Mail will restart. Why can't I delete an email on Windows Mail?

  This is no e-mail spam but I know.  I click it and it will send a message that Windows Mail will restart and it does not start a 2nd time.  Then I try to access this e-mail again, Windows Mail stops and I have to restart Windows Mail all over again.  Does it only for that one e-mail I received 5 days ago and still impossible to remove.

  1. Check work offline.
  2. Turn off the preview pane.
  3. Click message header just to highlight.
  4. Shift + Delete.
   
  If still no joy, try to compact and repair the database.
   
  WMUtil
  http://www.oehelp.com/WMUtil/default.aspx