My Windows Media Player is corrupted. How can I solve this problem?

Similar Questions

• I tried to install Windows Media Player 11 on Windows 8, but it did not work, so now I decided to install Windows Media Player 12, but how can I do this?

  So, how can I do?

  This is not really supported (or technically even permitted by the EULA), then you will get no official Microsoft help do.

  Note that Windows Media Player 12 adds native support for H.264 (AVCHD. M2ts or. (MTS), the video codecs DivX and Xvid, AAC audio and 3GP, MOV and MP4 container formats, for downgrading to Windows Media Player 11 will remove these format support.

• Windows vista not install updates, how can I solve this problem

  I took my computer compaq running on windows vista & my windows updates will not install what can I do?

  I have been working on this since April too and may not know how to solve this problem.  Last update was in March.  I used the MicrosoftFixit.wu.MATSKB.Run with no luck.  He says that he can not solve the problem and leads to a MS web page, which doesn't help.   I also stop the update services and several DLLs and then restarted them without success, according to a website of windows troubleshooting.  I am not prepared to roll back, nor do I want to reload the operating system.  If I do that, I'm going to Linux.

• Diagnostic test on my HP laptop G72 64 bit Windows 7 is not. How can I solve this problem?

  Hello

  I can't connect to wireless internet; However, I can via rigid cable.  I was told to run a diagnostic and I received the following message: model memory 2 DIMM has failed.  We advised me to go to hp.com support and download the wireless driver and that should fix.  I have done that and restarted my computer and I can not pick up a wireless connection, but I can always get on the internet using ethernet.  If my memory does not, he wanted me to use wireless internet?  Also, I am able to use my computer completely under the wireless internet as well how, if my memory may be bad?  Please advise me on what to do to correct this.  My last resort is to use the F11 key for a system restore.  I thank very you much for your time.

  Hi MaumelleGirl,

  Thank you very much for the product number. Here is your Service and Maintenance Guide for your model. On page 4-11 you will find compatible part numbers and instructions on how to replace the RAM.  You can order the RAM in HP Partsurfer using the part number or the order of a third-party online site.

• I get an error loading C: Windows\ifapilidarexowex.dll rundll. How can I solve this problem?

  I have a laptop Gateway running Windows XP Pro. When you connect to any account, I get an error loading C: Windows \ifapilidarexowex.dll rundll. I click on the OK button and the system starts and seems to work fine. It is an annoyance and should be fixed. I don't know how.

  C: Windows\ifapilidarexowex.dll<-- this="" is="" a="" malware="">

  As already mentioned by the first poster, the loading of the module above error is because the point of loading in the registry is still intact and trying to load a file that no longer exist. (A malware dll) file has been deleted either by your resident anti-virus or other scanners, but left intact registry value where the error.

  What needs to be done, is either operate scanners who clean up redundant reg for example, MalwareBytes entries or other scanners or run other tools such as HijacThis and tick the corresponding section of fault start and click on the "Fix checked" button. hijackThis will then remove the redundant value and error loading stops. It is easier to use a tool, so you don't have to worry about editing the registry.
  You could also disable the offending boot entry via msconfig > startup if it shows up there.

  Below is an example of an error in loading a module of malware that has been deleted by the antivirus, but has not removed the corresponding registry value.
  04 entry in the log from hijackthis should look like the example below.

  "Error loading c:\windows\system32\ravkgmff.dll the specified module is not found."

  O4 - HKLM\... \Run: [GPLv3] rundll32.exe "C:\WINDOWS\system32\ravkgmff.dll",realset"

  http://free.antivirus.com/HijackThis/

• Cloud creative app empty in windows 10... How can I solve this problem?

  Adobe creative cloud app window is empty. I tried uninstalling and reinstalling, but it did not work. I am also unable to log my Muse app, but can connect to my Adobe Creative Cloud account. Help!

  Hi try this: Creative Cloud Manager is empty

• "This version of windows is not genuine" now, how can I solve this problem?

  I've had my computer for about a year now, I have purchased from an online retailer and had no problems with it until tonight. He says now this version of windows is not genuine and I have no idea what to do.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 50
  Code of Validation caching online: 0x0
  Windows product key: *-* - G24VV - 33FHQ-7T47M
  The Windows Product Key hash: UGZM1rvCYzqW8 + vkqRaVuYkMLr8 =
  Windows product ID: 00359-OEM-8704306-86632
  Windows Product ID Type: 3
  Windows license Type: OEM System Builder
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {CF021E53-765D-457B-82BA-05D1FA3D4FE4} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.150316 - 1654
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {CF021E53-765D-457B-82BA-05D1FA3D4FE4}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-7T47M00359-OEM-8704306-866323S-1-5-21-1963349060-703716915-3741463835Gigabyte Technology Co., Ltd.. H81M-H American Megatrends Inc.. F5 20140120000000.000000 + 00069BC0100010000F408090409GMT Standard Time(GMT+00:00)03109

  Content Spsys.log: 0 x 80070002

  License data-->
  C:\Windows\system32\slmgr.vbs(1333, 5) (null): the service has not been started.

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0xC004C533
  Beyond: 0 x 0000000000000000
  Event timestamp: 5:8:2015 22:05
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  N/a, hr = 0x8007000d

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  ALASKA APIC HAS M I
  FACP ALASKA A M I
  HPET ALASKA A M I
  ALASKA MCFG A M I
  FPDT ALASKA A M I
  SSDT PmRef Cpu0Ist
  SSDT PmRef Cpu0Ist
  SSDT PmRef Cpu0Ist
  SSDT PmRef Cpu0Ist
  LAURENCE INTEL HSW

  There is always a minor error in the report - please try validation using Internet Explorer, at www.microsoft.com/genuine/validate

  It should pass--and clear the error.

• Windows FixIt error code 0 x 80092003. -What this means and how can I solve this problem?

  I have a PC with Windows XP SP3... ecentlped recognizing my DVD/CDRW. I tried to download Windows Fixit and when I tried to run, I get the error code 0 x 80092003. -What this means and how can I solve this problem?

  HP Pavilion a1410n PC with Windows XP Media Center edition. Sony Optiarc cddvdRW.

  Hi J Mbanza,

  -What is the link that you used to download the fix tool from?

  error 0 x 80092003 which is an error reading or writing to a file.

  Try to download from the link below and check.

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Thank you!

• My phone displays an error message on the startup file and it mentions the installation media, how can I solve this problem?

  Separated from this thread.

  My phone displays an error message on the startup file and it mentions the installation media, how can I solve this problem?

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  There are several methods to reinstall Vista.

  This can help you (download files and make your own DVDs):

  http://www.heidoc.NET/Joomla/technology-science/Microsoft/57-Windows-Vista-direct-download-links

  And here are instructions on how to burn ISO disk images:

  http://www.SnapFiles.com/get/isorecorder.html

  The download links and information on how to make the ISO file, and then create the Setup DVD above are at this link:

  "How to download a Vista ISO and create a Setup DVD or USB"

  http://www.Vistax64.com/tutorials/301852-Vista-ISO-download-create-installation-DVD-USB.html

  "How to create a USB of Vista Installation key '

  http://www.Vistax64.com/tutorials/181538-USB-bootable-Vista-installation-Flash-thumb-drive.html

  ___________________________________

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  ___________________________________

  And if you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Them or us ask the right sequence of key.

  ___________________________________

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• I am trying to install an update to iCloud on my Win 7 PC and I get an error message that there is a problem with my windows install. How can I solve this problem?

  I am trying to install an update to iCloud on my Win 7 PC and I get an error message that there is a problem with my windows install. How can I solve this problem?

  Hello grandpa_bill,

  Thank you for your participation in the communities of Support from Apple.

  If you get an error when you install an update to iCloud for Windows, try to download the latest version of download iCloud for Windows.

  For more information, see get help using iCloud for Windows.

  All the best.

• I have an old computer running windows 98 when I try to start until you get a date checking DMI Pool error message failure boot ATAPI CD-Rom 07,08 what this mean and how can I solve this problem?

  I have an old computer running windows 98 when I try to start until you get a date checking DMI Pool error message failure boot ATAPI CD-Rom 07,08 what this mean and how can I solve this problem?

  I want to erase the hard drive and use it to install windows xp.

  From what I've read, it could be a number of things that went on the wall. Issue of dead hard drive, BIOS, peripheral USB plugged when starting, etc.

  Does not help, but could help to point you in the right direction...

• When I accessed at "MS Check for updates ', error found: Code 8000FFFF, Windows Update has encountered an error that is known. How can I solve this problem?

  When I accessed at "MS Check for updates ', error found: Code 8000FFFF, Windows Update has encountered an error that is known. How can I solve this problem?

  http://support.Microsoft.com/kb/946414

  «"Error when you download updates using Windows Update or Microsoft Update: 8000FFFF"»

  Follow the information given in the above link to solve your problem.

  See you soon. Mick Murphy - Microsoft partner

• When I try to use the Windows Update link for my XP computer I get a message indicating that the location where the Windows Update stores data has changed and it needs to be repaired. How can I solve this problem?

  When I try to use the Windows Update link for my XP computer and after using Windows Mr. Fix - It, I get a message indicating that the location where the Windows Update stores data has changed and must be repaired. How can I solve this problem?

  I'm not that computer literate and do not understand what needs to be fixed.

  This problem just started a few weeks when I noticed that I had any recent download automatic update that I regularly get. So I tried to do it manually through access via my control panel.

  I use ESET Antivirus Node32 software.

  Hello

  1. What is the error message or an exact error code?

  2 have you made changes on the computer before this problem?

  3. you try to check the updates?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Reset Windows Update components and then try to download the updates.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756

   

  Method 2:

  File system scan tool checker and then try to press Ctrl + Alt + Delete and check.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe):

  http://support.Microsoft.com/kb/310747

  Please respond with more information so that we could help you more.

• Windows XP: I have 448 MB of RAM available. What happened to the 64 MB of RAM lack and how can I solve this problem. Thank you

  I am trying to install application constant guard Internet Security of Comcast.  After trying to download and install the product, I get and RAM error message indicating I need 512 MB of RAM to install this product, and I only have 448 MB of RAM available.  What happened to the 64 MB of RAM lack and how can I solve this problem.  Thank you

  The only way to see more of RAM is to install a graphics card and disable the onboard graphics of your motherboard. If you do this, you should be able to see all the 512 MB of it.

  That being said, I will repeat what I said before...
  You can always buy more RAM and install it on your motherboard. Go to crucial.com for more information.

  In addition, you should review install 'Internet Security' application or suite. They are not necessary (you can easily configure Windows so that it is very safe) and they often ruin the performance of a PC.

  If you want advice in "hardening" your PC security, let know us.

• My Task Manager displays all of the window. How can I solve this problem.

  original title: Task Manager

  My Task Manager displays all of the window.  How can I solve this problem.

  Looks like you run the Task Manager using tiny/small footprint.

  If you double-click on the empty space around the border of the screen of the Task Manager, it will be
  return to normal mode, and then you should see the tabs you are accustomed to seeing.

  You can read about it here:

  http://www.BROADBANDreports.com/FAQ/6905

  If sfc/scannow solves your problems, I'll send you (or your charitable organization preferred) $10 American.
  Read :--->