My Windows partition is not bootable after creating a new partition

Similar Questions

• Windows 8.1 did not create a user profile after creating a new user

  I was deeply puzzled by this problem.

  Just bought a MS Surface Pro 128 GB and upgraded to 8.1 Windows it works fine until I needed to create a new user. He is a user of child for my daughter with a local account only. After creating the new user account, I tried to logon. He complained "user profile Service does not have the sign in» Google it and found the solution to change the registry for the location of the profile displayed on many sites. So I launched regedit. But to my surprise, there is no entry for the new user to the profilelist title - there are only two entries: one for me (admin), and the other is for a user named "fwuser". So I couldn't use the method to rename the master for this problem.

  Could someone give me a tip, which could cause this problem and how to fix it? Much appreciate it.

  Hello

  Have you tried this fix, please try it out and tell us:

  http://www.kapilarya.com/fix-error-user-profile-service-failed-the-logon-user-profile-cannot-be-loaded-for-Windows-8

  Hope this helps, good luck :)

• Windows Vista does not start after installing Linux OS

  original title: Windows Vista does not start after the installation of the Linux OS... Help!

  I installed Fedora 10 Red Hat Linux on my HP laptop and now each time it powers on, I can't do vista windows at startup.  Goes directly into Linux.

  I need to get back to normal.  Any help would be appreciated.

  I installed Fedora 10 Red Hat Linux on my HP laptop and now each time it powers on, I can't do vista windows at startup.  Goes directly into Linux.

  I need to get back to normal.  Any help would be appreciated.

  Hey Oscar Jose

  Download the correct ISO file and make a disk bootable from the link below

  Then use the Startup Repair option when you start from

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  or at startup press F11 to start the process of restoration of hp and see if you can reinstall vista from the recovery partition and place your machine, back to the way you bought

  warning you all data loss and 3 third-party programs that you have installed unless there is a non-destructive option in your hp recovery options

  Thirdly try to ask in a fedora forum to solve the problem, he has caused

  http://fedoraproject.org/

  Walter, the time zone traveller

• Installation of Windows service does not work after Windows Explorer 9 uninstalling and reinstall Explorer 8

  Installation of Windows service does not work after Explorer 9 uninstallation and reinstallation of 8.  I followed several suggestions on this forum, but still no luck.  I ran the SFC system twice, who told me he had corrupted files.  "Some have been repaired and some might not be."  I then went in the event viewer after a start to the top and he stated that the 'Adobe APM service' is not found.  Also the "hpqddsvc' and the 'gupdate' is not found.  He tries to install something every time I start, but he abandoned.  I checked whether the system is on and disabled.  It's on.  There are a lot of small problems, but my main concern is the Adobe program.  I tried uninstalling and reinstalling Adobe, but still get an error message that the Windows Installer Service could not be accessed. Other suggestions?

  Hello

  I suggest you follow the link and check.

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

  http://support.Microsoft.com/kb/2438651

• Adobe AIR 22 beta (April 6, 2016), 'Download AIR SDK & compile for Windows' file does not? After I download and visualize the 'air - SDK - description.xml', the version is 21?

  Adobe AIR 22 beta (April 6, 2016), 'Download AIR SDK & compile for Windows' file does not? After that I have download and view the 'air - SDK - description.xml',

  < name > AIR 21.0.0 < / name >

  < version > 21.0.0 < / version >

  Hello

  We have fixed this problem. Please download a second time to get 22 AIR beta build.

  Thank you

  Krati

  Adobe AIR Team

• Windows Update was not able to verify the new updates for the last 30 days, go to windows update to resolve this problem

  Hi people

  I'm on Windows 8, and in these last days, I get this message

  " " Windows Update was not able to verify the new updates for the last 30 days, go to windows update to resolve this problem"

  It is on a blue banner that goes directly to the screen and it is very annoying

  I get updates through so I do not understand this

  Any help would be great

  PS I have tryied the restoration of the system, and it's always the same

  Lee was soon

  Original title: looking for some help please

  Hi Lee,.

  I had this same problem and it drove me crazy, but I solved it.

  I clicked on the link above that 'Shubham Chin"gave, and in this link all the topic, if you click on the topic" my PC is not responding all by searching for the or to install updates.

  below that it will then say "try to run windows update convenience store", click on that and it should get rid of this very annoying pop to the top and other problems with your laptop... hope I helped :)

• For first 14 Elements. I can't stabilize a 2, 7 K GoPro video: error message ' video size &amp; project is not compatible. " Create a new project.

  For first 14 Elements. I can't stabilize a 2, 7 K GoPro video: error message ' video size & project is not compatible. " Create a new project. Project automatically implemented by Adobe settings is 4K. Which the project settings to choose for a 2.7 K 25 fps?

  [title published by mod]

  Do not rely on such update. 2.7 K is not an ordinary resolution.

  You can import 2.7 K in ss14, you can't stabilize.

  First Pro CC 2015 to do this.

  But if 2.7 K files are introduced into a sequence of 1920 x 1080 you have the same problem, but this problem is corrected by nesting the images first.

• Partition Windows 10 does not start after you have created the new internal drive

  I'm running OS X 10.11.2.

  I have set up a training camp 10 Windows on my Macbook Pro sometime ago, but today I realized that I need more storage. I watched how do so online and came across this thread:How to resize my bootcamp partition without deleting chtol. I followed the instructions, but could not know how do I find my Windows partition.

  So I think that I have the problem described here: repair Boot Camp after having created the new partition. I did what Christopher Murphy described on the first page and this error message appeared when I pressed "w ":

  "Failed to open device ' / dev/disk0 ' for writing! Errno is 1! Writing of abandonment! »

  I deleted from the extra without internal hard drive name in the hope that he'll fix it, but it didn't.

  I would like to enlarge my Windows partition, but at this point, as long as I can access my Windows Bootcamp partition, that would be great!

  EDIT: I unfortunately do not back to the time Machine.

  Resizing Windows partitions is not officially supported by Apple - Boot Camp: resize the Windows partition .

  Please after the release of

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

• Partiton of Windows can not find after create new partiton

  Hello guys

  I created the partition for windows 10 and installed on my mac 'I have mac book pro 2009 13 inch IOS al capitan' and I want another partition for windows so I go to boot mac open mac and creating another partition when it finished I failed but my partition created. My problem is when I open my laptop and I want to open windows I click 'alt', but can't find windows to open it so that my request is if there is a way to restore my windows without installing again.

  Thank you

  Hi, MSCreationAndMore.

  Please visit Apple support communities.

  I understand that you cannot start Windows after you create another partition.  For now, you can have a single partition Mac and a Windows partition.  You must start over and install Windows again.

  Boot Camp: The problems of creation of partition

  Set up Windows on your Mac partition

  See you soon

• After creating the new partition Boot Camp of fixation

  Hi, I tried to resize my Windows 10 bootcamp but changed my mind, when I deleted the empty partition without title and will reboot my computer to start with Windows, it does not appear (I pressed the option key alt is told by the way). So a way to solve this problem of boot camp after having created a new partition? I deleted this partition empty, just to let you know again.

  Thank you.

  Some screenshots of my disk utility (http://imgur.com/a/3dyle):

  

  

• Windows Vista will not start after the automatic installation of the patch Ms.

  My Dell laptop does an automatic installation of the latest MS patches (12/08/10) and now he can't boot into windows.  All tests show that the material is fine, but an error at the end of the "bad update patch" said test results I can not even to go back to a previous restore point.  This happened to me the year last on my desk... same thing, but it's XP which could not start after an automatic update for the Member States.  Dell technical support told me that MS knows what is happening, but it is not supposed to be public knowledge.  I need to know if there is a fix, in addition to erase everything and do a complete reinstallation of the operating system.

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• recovery system after creating a new partition

  Product number: A6Y43UAR #ABA

  Name: HP Pavilion g6-1d38dx Notebook PC

  OS: Windows 7 64-bit

  My hard drive is shipped with a factory setting of 4 primary partitions. I would like to remove one of the partitions in order to create a new primary partition using this guide (jump to option I content):

  http://h30434.www3.HP.com/T5/other-notebook-PC-questions/how-to-REPARTITION-HDD-of-HP-notebook-with-...

  My goal is to create a new partition D where I store all my data so that something happened to my operating system that is on the C drive (viruses, etc.), all my data will be safe in the drive D. I hope that running the system recovery HP (using the f11 key) will not remove the user created the D partition and the data in it , but that's where my confusion. The guide above says the following on this subject:

  "Remember that if you decide to use the recovery discs or the F11 option to restore the PC to its original state, all partitions that have been created by you will be lost and will also lose all data that was stored on them."

  
  However, another document which is the HP system recovery guide, says the following

  Your computer can have three types of available system recovery, or he might have only two. Use the type of recovery in order to solve your problem without making further changes as necessary.

  If you don't have 3 options in the recovery then Yes, System Recovery Manager will delete all partitions and restore the original configuration.

  To better protect your files an external USB hdd is a good investment of backup. You can also use it to make a System Image of your hard drive that can be used to restore windows and all software/drivers if you need to reinstall. 1 > guide 2 > guide

• HP 15 laptop: by default windows recovery does not work after windows formatting

  I had windows installed 8.1 in my computer. It has updated to windows 10 and I started facing problems with the drivers and software.

  I formatted the windows partition and installed the trial version of windows 7 64-bit. Now I want to restore to windows 8.1, but the option does not come when I press f11 and go to the Recovery Manager in the start menu. "Restore to factory settings" option has disappeared and I can't select it more.

  I have not formatted the recovery and reserve system partitions and only formatted the partition where previous windows has been installed (C.) When I run the Disk Manager, it shows that the system and recovery reserve partitions, although I can not open any of them.

  Please help me. How to recover my windows by default?

  Hello

  After playing with 10 Windows Windows 7, then the tool HP is useless now. Probably you did not a game/recovery media so you need to contact HP to order a new set

  In the United States:
  
      http://WWW8.HP.com/us/en/contact-HP/phone-assist.html#section1

  other countries:

  http://welcome.HP.com/country/W1/en/contact_us.html

  Good luck.

• Cannot access/locate my user folder after creating a new partition

  I have recently created a new partition on an old hard drive and started own XP but kept all my original data in other partitions. Now after going through the whole upward. I am able to access the data of my other drives connected to my mobo but the hard drive on that I created a new partition shows that it contains all my original data, but everytime I open the C:\ drive that matches the player sound occurring on I can not access the user folder. I can't even see, it is not visible. I would find this folder or access my data on the hard disk, how would I go to do?

  Hi LorennFields,
   
  Check if the file was hidden.
   
  Check the following link to view the hidden files and folders:
  To view the hidden files and folders

• Windows 7 does not start after reboot.

  I did a fresh install of windows 7 ultimate. Setup was good, he began, updated, installed some drivers and software, tried to reload and bad news. Restarting stopped with a white screen where the startup screen should be. I turn off the cpu and no problems at windows startup. I tried several times and no luck. If the restart from the menu start, it stops at the empty screen. "I seek answers and possibly other charges was installing, disabled all updates and disconnected all the printers, speakers, etc." and again not luck. After that first start and the processor does not start after a reboot. It stays on with a blank screen and no response to keyboard... Help, please...

  I corrected this easy on my HP 7100

  Go to management, records and defined as being active, then fixed, make a right click on the partition with windows on them might have to boot windows disk and choose repair option 2 times I found on a model of friends. Anyway, problem fixed, now able to restart (warm start)