Windows 7 does not start after reboot.

Similar Questions

• Windows Vista does not start after installing Linux OS

  original title: Windows Vista does not start after the installation of the Linux OS... Help!

  I installed Fedora 10 Red Hat Linux on my HP laptop and now each time it powers on, I can't do vista windows at startup.  Goes directly into Linux.

  I need to get back to normal.  Any help would be appreciated.

  I installed Fedora 10 Red Hat Linux on my HP laptop and now each time it powers on, I can't do vista windows at startup.  Goes directly into Linux.

  I need to get back to normal.  Any help would be appreciated.

  Hey Oscar Jose

  Download the correct ISO file and make a disk bootable from the link below

  Then use the Startup Repair option when you start from

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  or at startup press F11 to start the process of restoration of hp and see if you can reinstall vista from the recovery partition and place your machine, back to the way you bought

  warning you all data loss and 3 third-party programs that you have installed unless there is a non-destructive option in your hp recovery options

  Thirdly try to ask in a fedora forum to solve the problem, he has caused

  http://fedoraproject.org/

  Walter, the time zone traveller

• Windows XP does not start after the installation of 3 GB of RAM. Will start with only 2 GB or less.

  I installed the new RAM on my desktop Compaq EVO D500.  Everything was working fine until 2 GB.  When I tried to install no matter what the computer does not start.  Specifications of the computer say maximum RAM is 3 GB.  All the memory and are good because I swapped taken in all the combinations possible and memory.  Any ideas. gknapp_ny

  If their were any memory related settings that had to be changed I would have no idea how do.  I had initially 512 MB of RAM (256-2 sticks).  I added a stick of 1 GB aditional third availabel taking and all went well.  Then I had two more identical 1 GB sticks and added them one at a time.  With 2 GB without problem.  But with the third stick of 1 GB that I couldn't start - I just beeps. I swapped one of the sticks of 1 GB for an old 256 MB and still no start just beeps.  When I run 2 GB everything is fine.  The BIOS recognizes the 2 GB of RAM. gknapp_ny

  Sounds as if your BIOS will not identify no matter what says the spec, 3 GB.

  It seems as if you may need a BIOS update in order to recognize the 3 GB of RAM - especially if it is a very old Compaq Evo D500.  See the "Improvements" tab to the page linked below.

  See http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=96295&swItem=PSG_I15378-37635&prodNameId=97121&swEnvOID=1093&swLang=13&taskId=135&mode=3

  Note that the patch on the link above is for models Evo D500 "with a ROM family 686Y2."  Read the "Release Notes" on this page to determine if your machine is one of those and if so, see "Instructions of Installation" to install the upgrade.  If your D500 is a laptop, you should Flash the ROM ONLY (i.e., update the BIOS level) when the computer is plugged - loss of power during this process can potentially cause irreparable harm to the computer.

• Windows XP does not start after the installation of an SSD.

  Windows XP SP3 and Intel Smart Response Technology

  Recently, I built a new computer and installed Windows XP Pro and Windows 7 Pro in a dual-boot arrangement.  Everything worked very well.  I then installed an SSD in the hopes of using the Intel Smart Response Technology (SRT) to speed things up.

  I shut down the computer, installed the SSD, brought up in Win7 and follow the easy guests in SRT to activate the player.  Restarted several times and things SSD speed up significantly.  Wonderful.
  I so restart and select Windows XP so I can SRT it.  After you select Windows XP in the boot menu, a few seconds and I get a quick flash of a BSOD and the computer restarts spontaneously.  I can't enter in WinXP, not even without failure or last known good config Mode.
  I again in Win7 and disable the SRT, reboot and I can enter Windows XP very well.  So obviously WinXP has a problem with the SRT is activated outside the XP.  That being said, I can't activate SRT in WinXP first either.  "Accelerate" option does not appear in the menu.
  Any ideas on that?
  Thanks for your help!
  -Matt

  Hello

  In these cases, we always recommend to update the system BIOS of motherboard, update the firmware of the controller RAID and disks installed. If the problem persists, you will need to fix the compatibility problem directly with the manufacturer of the motherboard and add it to the RAID controller itself.

  I suggest you to contact Intel support site to improve assistance on the issue.

  http://www.Intel.com/p/en_US/support?IID=HDR+support

  Warning of the BIOS:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  See also:

  http://download.Intel.com/support/chipsets/SB/intel_smart_response_technology_user_guide.PDF

• Pavilion HDX 16: Windows 7 does not start after the upgrade to Windows 10

  Hello

  I have a system to dual-boot with windows 7 and ubuntu (with Windows 7 and NeoGrub Bootloader Windows Boot Manager).

  Recently, I upgraded from windows 7 to windows 10 via free upgrade offered by SM. However, I didn't like windows 10 and tried to upgrade to windows 7 by the following settings-> update of the security & -> Recovery-> Go Back to Windows 7.

  After the long process of decommissioning, cannot start windows 7 and the "Startup Repair" tool began to run. However, he could not solve the problem. Other recovery options 'system restore' and 'image system recovery' is not such that it could not find any restore point or the image created previously (I'm sure it were created before upgrade restore points).

  So, although I can boot ubuntu without any problem, I can't start windows 7. After the "starting windows" screen, I get the blue screen (a problem has been detected and windows has been shut down...).

  I intend to use the DVD to install windows 7 for repair, but

  (1) I don't know if I can boot from the CD because it is a dual-boot configuration

  (2) I'm afraid of losing work ubuntu OS.

  I appreciate if someone can help me find my Windows 7. I thank very you much for your time.

  Sorry, but there are a lot of reports on forums of Win10 the option of GoBack does not always work correctly.

  You should be able to boot properly from the same DVD of Win7 if you dual-boot with Ubuntu, but be aware, if the startup repair works (you may need to run three times), it will replace the link to start Linux in the MBR and after that, the machine starts immediately to Win7.  You will need to reinstall GRUB to get Ubuntu boot back.  You may be able to fix the boot of Ubuntu using repair boot: Boot-Repair - Community Ubuntu Documentation

• Windows Vista does not start after the abnormal termination.

  I use windows Vista Home premium for more
  two years without major problems so far. However, this week, I encountered a major problem with Vista, the computer froze and I had to manually turned off. After that when I rebooted my laptop, it will remain on the screen starting with drag the green bars forever.

  I tried the following:

  
  -start in safe mode: safe mode works, but normal startup after that still hangs.
  -System Restore: System Restore works, but even after restoring hangs normal startup.
  -repair of the system with the help of the installation DVD: is not able to repair.
  reports of undetermined origin.

  Help, please.

  Thanks in advance.

  "Gets to a point where I see microsft operation and green bar and it gets stuck.
  there forever. "
   
  Hmmm - it's therefore something quite critical, then! :(
   
  Start safe mode and run the System File Checker
   
  1) click the Start button
  (2) type: cmd.exe
  (3) right click the cmd.exe file and select 'run as administrator '.
  (4) in the CMD window, type: sfc/scannow
  (5) reboot and see if that solves the problem.
   
  If not, then in Safe Mode, take a look in the event viewer and see if the
  the events surrounding the last boot to normal mode give any idea regarding the
  cause. (Just use the app and the Windows system event logs for the)
  now)
   
  BTW - I saw boots to take more than 30 minutes of the Normal Mode - so make sure you
  sure leave you long enough!
   
  --
  Noel Paton
  CrashFixPC
   
  Nil Carborundum Illegitemi
  www.crashfixpc.co.UK
   
   

• 8.1 Windows pc does not start after you uninstall Avast

  8.1 Windows pc with a 120 GB SSD primary and secondary 1 TB HHD.

  I decided to uninstall Avast, that we have a spare license on pay an anti virus package. The pc has been verified to ensure that all updates have been made and the pilots were up-to-date with a reboot after each. But after uninstalling Avast and restart I noticed the message Preparation AutoFix, which was not successful.  After which she was trying to diagnose. I tried to update, but it says there was a problem with refresh. Has been no change. he says there is no system restore points. Startup Repair couldn't fix it PC and gave the location of the log file that I opened via the command prompt. That indicates the number of causes deep = 1. All tests show results completed successfully and the error code = 0x0, except one, which is

  Name: Test of the registry hives
  Result: Completed successfully. Error code = 0 x 0
  Time taken = 859ms
  Root cause found:
  ---------
  Registry is corrupt
  Repair action: roll back register
  Result: failed. Error code = 0 x 2
  taking time = 0ms

  Now I don't know what to do! BUT before you do anything I want to look at and could ask for advice on this, the SSD 120 that Windows is on is almost full. I consider getting a greater capacity, especially if it is perhaps a better workaround. So can someone advise... Should I try and get somehow the problem resolved with the existing SSD, or will I get a new SSD and install Windows 8 on that and then try and extract what I maybe need off the old SSD? I would add that I have an installation disc of Windows 8 and then put far to 8,1 win via a download.

  I would add also... I'm not an expert with these things should easy understand so help!

  Thanks in advance

  Thanks for getting back to me. My questions are exactly the same as the original thread. After unistalling avast my 8.1 win goes into a loop of repair, no access to the office, safe mode, refresh does not work.  tried everything etcetcetcetc original thread and more. Consider no solution found.

• Windows 7 does not start after the installation of updates - sounds familiar!

  Apparently, I have another system that no longer starts after you install an update to Windows 7. New kick computer _ I have to disable the automatic update of windows. Twice I had to restore the system in the first week because he hung up after the installation of updates for windows 7. I have no idea what update is the cause of the problem.

  Essentially, start the screen goes black with the cursor blinking in the upper left corner of the screen. The only way out is to restore the system.

  Does anyone know what update is the culpret? HP support has no idea. Their only solution was to update windows 7 to 'never download an update from windows '. It is a terrible thing to be underestimated solution.

  Here's the resolution...

  I installed all the updates except KB2284742 954430, 973688 and 971033. So I decided to install these 1 4 at a time in the order shown. I installed successfully 228472 and 954430 and 973688 disappeared from the list of available updates. So I installed 971033 and it installed successfully and I was still able to restart.

  My conclusion is that there is a conflict between the first 3 updates when they are installed at the same time.

  Now my system is up to date with all windows updates and I'm able to restart without any problems!

  Close this message.

• Windows XP does not start after Windows updates

  Original title: recent Windows update for xp

  As a result a my computer Windows xp, last Tuesday, my computer is now inoperative.  He was fine before this, but cannot get it to turn on.

  When I tried again today, a message came up saying Microsoft to apologize for the inconvenience, but Windows did not start successfully.  A recent hardware or software change might have caused this.
  What should I do now?

  Grandmother,

  If the options above do not, I suggest you use the Recovery Console to try to fix your Windows XP

  Here's HOW - there images, so it is easier to follow. Read the section on how to use it.

  Once you are connected to the Recovery Console, type the following command and press ENTER:

  CHKDSK/p

  There is a space between 'k' and ' / '.

  This may take a few minutes and the command can fix registry issues possible that occurred. This is based on the experience that I have used this on an old XP machine and it showed a message after the recovery that looks like this

  See you soon ~!

• Network card in Windows 7 does not start after PC mode 'sleep'

  I'm having a problem with multiple PCs in a field by which after that the PC goes into sleep mode network connectivity is lost or degraded. PC users past in mode 'sleep' and they won't be able to connect, or if they can open a session they will not have access to network drives. Restart or NIC deactivation and reactivation of will solve the problem. Also note that he seems to have started after the installation of update for Windows Defender (definition 1.211.1747) definition.

  Hello

  Thanks for posting your query on the Microsoft Community.

  You mentioned that you are connected to a domain network, I suggest you post your query on the TechNet forums as we have experts working on this type of questions and for you help the better.

  Check out the link:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Partition Windows 10 does not start after you have created the new internal drive

  I'm running OS X 10.11.2.

  I have set up a training camp 10 Windows on my Macbook Pro sometime ago, but today I realized that I need more storage. I watched how do so online and came across this thread:How to resize my bootcamp partition without deleting chtol. I followed the instructions, but could not know how do I find my Windows partition.

  So I think that I have the problem described here: repair Boot Camp after having created the new partition. I did what Christopher Murphy described on the first page and this error message appeared when I pressed "w ":

  "Failed to open device ' / dev/disk0 ' for writing! Errno is 1! Writing of abandonment! »

  I deleted from the extra without internal hard drive name in the hope that he'll fix it, but it didn't.

  I would like to enlarge my Windows partition, but at this point, as long as I can access my Windows Bootcamp partition, that would be great!

  EDIT: I unfortunately do not back to the time Machine.

  Resizing Windows partitions is not officially supported by Apple - Boot Camp: resize the Windows partition .

  Please after the release of

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

• Windows xp does not start after the system restore

  Hi, a few days ago, I restored the system to my computer because it showed no hard disks that have been added to the computer. I had no problem before, so I restored the system to the same day. AGTER system restore, my computer would not start. Well, it's not to the point where I'm supposed to pick a user, but instead of a list of users, it shows 'windows xp' on a blue background. I turned the computer off tension and Trier to start in "safe mode", but it did not help. What should I do? Thank you.

  Hello

  Follow these steps and check if they help.

  Step 1:

  Remove all external devices such as printers, USB and then try to start.

  Step 2:

  I suggest that you perform the installation of repair XP on your computer and check if that helps.

  http://www.Microsoft.com/windowsxp/using/helpandsupport/learnmore/tips/doug92.mspx

  Note: Make sure you have uninstalled the latest version of Internet Explorer if installed before to perform the repair facility.

  Reference:

  http://support.Microsoft.com/kb/917964

• CentOS 6.3 64B WSX does not start after reboot

  Hello

  I'm having a problem with WSX 1.0.2 on a box of 64-bit CentOS 6.3 (with Python installed 2.6.6).

  Once installed WSX begins and I am able to connect.

  As soon as the server is restarted, WSX fails to start, the boot and manually (that is, if I run /etc/init.d/vmware-wsx-server reboot).

  The only way to start WSX and connect to it is to uninstall a re-installit after each reboot of the server. Very annoying.

  I did some tests and they are the outputs:

  invoke the executable stright away gives this error:

  wsx-VMware-Server [piero root@chris] #.
  Cannot open/usr/lib/vmware/lib/wsx/vmware-wsx-server free or archive /usr/lib/vmware/lib/wsx/vmware-wsx-server.pkg
  which invokes through python gives this:
  [root@chris piero] # python/usr/lib/vmware/lib/wsx/vmware-wsx-server
  File "/ usr/lib/vmware/lib/wsx/vmware-wsx-server ', line 1
  SyntaxError: Non-ASCII character "\x83" in file/usr/lib/vmware/lib/wsx/vmware-wsx-server on line 2, but no encoding not declared; see http://www.Python.org/PEPs/PEP-0263.html for more information

  Looks like on there is a problem with the encoding, but I'm not a coder, and I do not know where to go to from there.

  Any idea?

  Well... I was wrong!

  WSX 1.1.0 has just be released (for Windows and Linux) and the problem seems to have disappeared.

  I have upgraded to 1.0.2 WSX restarted 1.1.0 host CentOS and the WSX starts very well!

  I am finally able to connect in WSX after a reboot of the host.

  Everything you did... good job, problem solved!

• Windows Vista does not start after you use the Hp Recovery Manager. What should I do?

  I used Recovery Manager to reinstall Windows Vista Basic 32-bit. During installation, it shows 0% completion although at the end it says everything is ok. After clicking on the button finish, he starts up the Recovery Manager again asking if I want to recover Windows. If I choose the Cancel button it restarts with the same Recovery Manager screen. What can I do?

  You can call HP technical support at 1-800-474-6836. Or you can give your product number, not the serial number, and I'll try to send you the link to order yourself.

• Windows 7 does not start after the C disk cloning

  I got a new SSD and hope to clone my drive C for the SSD, then start with the SSD. I cloned the C drive using the software that came with my SSD (NTI Echo iirc). Cloning is completed and the system stops. I started the PC and went to the start menu to change the boot for the SSD device. It wouldn't start up, gives me the following error: "cannot start Windows. A recent hardware or software change might be the cause. "Then it tells me to insert the Windows installation disc (that I have not since he's back in the States and I currently live in the Japan) to fix the computer. Boot from my original HDD with SSD unplugged gives me the status code "0xc000000e." Boot from the SSD with the original HHD unplugged gives me the status code "0xc0000225." Info for both was, "the boot selection failed because a required device is not accessible."
  
  I made a recovery disk using my laptop (which I am currently working on) and started via CD/DVD. The System Recovery Options appears and Windows 7 appears on the list, but the size of the partition is 0 and the location says '(unknown) '. I can't click Next or whatever it is because it's just loading all the time.
  
  I tried to go into the system recovery on the first screen (where you enter in the start menu, etc.) and by pressing F11 (System Recovery) doesn't do anything.
  
  My PC is a HP a6614f. I've updated the PSU with a 500W modular one and put in a dedicated GPU. Everything worked fine until I cloned the drive C on the SSD and now no player starts. The primary HHD is partitioned into two with Windows and programs installed on the C drive (personal files are on drive D partition). Drive C was 103 GB and my SSD has 119 GB of free space so I don't think it should be a matter of space.
  
  I am at the end of my tether here since I don't know why the hell my C drive cloning should affect the original drive. At least, I should be able to boot off the original drive, otherwise the SSD. really need my PC to work (with or without the SSD) so any help would be appreciated. Thank you.

  Has managed to solve my problem. All I needed was a Windows 7 installation disc for 'repair my computer.' I managed to download (legally) of Digital River and after that he did his thing, I was able to start my new SSD. Whoo Hoo!