My Windows Vista gives me a message that I am more authentic.
Messed up my laptop
my pc has been in a store of the local computer because XP wasn't working. They put vista on, he worked for 6 months now, error message says vista not genuine. Shop is closed what can I do to get my pc off sta vista. I tried a restore point, but it will not restore XP
Order a set of the PC manufacturer's recovery disks - then wipe and reinstall.
or
Purchase a legal license for Windows 7 in a reputable store and clean-install that.
These TWO solutions require that you back up your data on an external support.
Tags: Windows
Similar Questions
-
How can I fix the error message that reader Multimedia Keyboard stopped working. My keyboard is a
0817-gateway model # KB.
Hello
I suggest you to follow these steps and check if that helps:
Method 1:
Start the computer in safe mode and check if the same problem occurs:
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-modeMethod 2:
If it works fine in safe mode, and then try to perform the clean boot and check if it helps:
http://support.Microsoft.com/kb/929135NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.
It will be useful.
-
problem with vista windows serial
I was using original windows appearance has been formatted... after then when I installed again and tried to activate it, it says serial number is already in use. but I HAV formatted and installed windows several times but it has not happened before... then, why is it not activate now?
If you have installed and activated too many times, this could be the cause of the failure of activation. Try the phone activation.
How to activate Windows Vista manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone * do not select/press any option * and wait for a person to help you.
(6) clearly explain your problem to the support person.
(7) the person must give you a confirmation ID, copy it down on paper,
(8) check that the ID is correct in reading the support person.
(9) to enter the ID number, then click 'Next' to complete the activation process.---------------------------- Alternatives -------------------------------------
To enable the use of the phone
1. open Windows Activation by clicking the Start button, right-click computer, clicking Properties, and then clickingActivate Windows now. ?
2. click on show me other ways to activate.
3 type your Windows 7 product key, and then click Next.
4. click on use the automated telephone and then click Next.
If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.5. click on the location nearest you from the drop-down list, and then click Next.
6. call one of the available phone numbers listed. An automated system will guide you through the activation process.
7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.
8 Note the confirmation ID the phone system gives you.
9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.
10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.
Microsoft Activation centers worldwide telephone numbers:
http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
(This site is for activating Volume License, but if you call, they will help you)The phone number is not working:
Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspxJ W Stuart: http://www.pagestart.com
-
Original title: how access key USB secure Windows vista
I have a lexar player sure to jump that I used with an old computer that has Windows XP. I now have a new computer with Windows Vista and I can't access the secure part of the USB key. When I try to access the part secure the USB key I have the following message "Application [-10004] could not find any JumpDrive Secure device connected to your system. Please make sure that your JumpDrive Secure device is inserted into a USB port".
Of course, the USB key is inserted into the USB port. If anyone can help find me a way to access the part secure the USB key I would appreciate it. Thank you.
Hi Jon0909,
The error that you received can be for several reasons. I suggest you try the following steps:
Method 1: Run the fixit available in the link below and check if that makes a difference
Tips for solving problems of USB devices
Method 2: This normal matter as a result of a conflict between the USB and other USB (Universal Serial Bus) connected to the computer.
(a) disconnect all the external devices connected to the computer to expect the mouse and keyboard, check if your USB key works.
(b) If this solves the problem, and then add back both devices until you discover the piece of hardware causing the issue.
If the problem persists, you can contact the manufacturer of the device for any known issues
http://www.Lexar.com/supportThank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
---------------------------------------------------------------------------------------------------------
Visit our Microsoft answers feedback Forum and let us know what you think. -
Need professional driver of hard disk for the installation of vista partition.
I try to install windows vista professional.I want to partition the hard drive; However, it says I need a driver.Where can I find this driver?I have a dell optiplex 360.If you still cannot find a BIOS entries to change, try to create a Partition Wizard bootable CD and use it to create a partition.
Partition Wizard Home Edition:
http://www.partitionwizard.com/free-partition-manager.html
Note: There is also a CD bootable or versions of the bootable Flash drive:
CD: http://www.partitionwizard.com/partition-wizard-bootable-cd.html
Flash player: http://www.partitionwizard.com/bootable-flash-drive.html
Among the features and functions: create partition, Delete partition, format partition,.
A partition resize, move partitions, Partition recovery after an accidental deletion,
Convert the partition, partition Explore, Hide partition,
Change the drive letter, a partition active Set, Explorer (content display) of the partition.
Note: To complete any task use the "Pending Operations" box at the bottom left.J W Stuart: http://www.pagestart.com
-
My version of Windows 98 gives you a message that it is not a genuine copy.
my computer is window 98 me. so why do you say that it does not pass genuine windows validation - atleast I should know what are installed in software are not authentic
Hello
Support for Windows 98 ended. Please take a look at this article.
http://support.Microsoft.com/lifecycle/?P1=6513
If you need technical support, please refer to the Contact Microsoft Web site.
-
I have a legitimate copy of windows in my hand with 2 CD case then why must I activate the same windows product, I had on my computer for 2 years. First of all I did not change any material in my computer so you can't use that excuse. I bought so many windows products since windows 3.1 to windows 98 for the Millennium of the window, xp home and professional and vista ultimate and now you say I have to buy a new copy. I can't believe this. I'm so angry. Go ahead and treat me like that. Just because you have the money and have the market you don't think I'm capable of anything, it's fraud and ripping off a consumer and you know. You have no reason for me to activate my windows again. It's like the 3 times on the same computer ruined. I does not change a single piece of hardware, and you want to deny my activation. all I know is that better, solve you the problem. It's so bad. If I lose my personal accounts and subscriptions I pay online because my windows is not working properly you're going to pay for them.
original title: what's your problem guys.According to the statement of 'Authentic' is concerned, be aware that any system that has not been activated (i.e. within the "grace period" will show as authentic except another problem.
You should also check that the word "Authorized" appears in the 'License' tab, under the license status.
-
product key
When I type the product key for my windows vista there is a message saying that this product product keys doesnot key valid Windows vistaHi Patrice root,
· You type the product key correctly?
· Where did you get the product key from?
Make sure that the caps lock is turned off.
Get validated product key by contacting Microsoft technical support.
How and when to contact Microsoft and support Customer Service
http://support.Microsoft.com/kb/295539
Resolve activation problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-activation-problems
For reference:
Get a new Windows product key
http://Windows.Microsoft.com/en-us/Windows-Vista/get-a-new-Windows-product-key
How to identify, locate, and replace a product key
-
Original title: webcam inspiron 1420
I tried to start my webcam and it gives me a message that says: 'LiveCam.exe. has stopped working. "I checked and it is said that it works correctly. I also looked and found something that seems to say that the app crashed. Any ideas? Thank you
BFM
Hi BartMorgan,
· What is the error correct mrssage?
· Is - this "LiveCam.exe has stopped working" or "LifeCam.exe has stopped working"?
Follow the suggestions below for a possible solution:
Method 1: I suggest you put your system to boot (in normal mode) to solve the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.
You can also check if the troubleshooting steps to help you in the article mentioned:
http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=266612
Method 2: Alternatively, you can try to uninstall and reinstall the drivers of webcam and check if that helps.
Step 1: You can try to remove the webcam in Device Manager:
a. click the Start button, in the start search box, type devmgmt.msc and press enter.
b. in the Device Manager window, click view , and click Show hidden devices
c. right-click on the webcam is installed.
d. in the dropdown menu, click Uninstall or Remove.
e. in the dialog box to confirm the device removal, click the OK button.
Step 2: Also verify and uninstall the webcam again from programs and features program, if it is installed and then restart the computer.
a. click Start.
(b) in the search box to start, type appwiz.cpl and press enter.
c. in the programs and features list, select the webcam program and Uninstall it.
d. restart the computer.
NOTE: After the reboot, the computer should recognize the connection of the camera and start to reinstall the driver.
I hope this helps.
-
Hi all
system information: HP DV6 LAPTOP, windows vista sp1
When I try to install windows vista sp1 disks/recovery partition that I get the error recovery manager prompting me to choose either to see the details of the failure or restart: CTOERROR.flg as a Notepad on my desk. I did try 100 times but nothing helped. I can't restart after this recovery failure message because it shows the dialog box when restarting: windows security update is not properly installed or is not approved. So, I have to go through the process of recovery again to see the desktop (any operation - music video, internet, all), but only once.
The last time I got this message too. When I did the windows installation of recovery a few months back discs, this time I figured out to install all updates IMP to automatic update via update of windows. All updates have been installed successfully, then it restarted and gone through the process of language settings, time settings and everything...
But this time when I'm trying to update windows, I get windows update, error 0 x 643 which is updating security for .net Framework 3.5 sp1 and update family. I don't know the answer how to exit with this error "windows help" and also this forum too, which asks for the installation of the updates of the .net framework from the windows update site directly. But the problem is:
Updated Windows ask me to restart windows automatic or manual update installation takes place and restart causes problem because it shows the dialog box - windows security update is not installed successfully. I need to install all updates at once like last time of my understanding. :
1. so, if I install the update to windows (to try my luck as last time) it says error 0 x 643 for .net framework and you ask to reboot, and after that when I try to manually install failed 0 x 643 updated it asks me to restart windows for pending updates.
2. in the alternative, if I try to install the update failed everything first just after the failure of the recovery it doesn't allow me to install important updates for vista sp1 and asked to restart windows.
All I need is to update all updates via windows automatic update that is not happening at the moment.
Not even be able to upgrade to sp2 bcz it also restarts for installation.
Help, please.
Thanks in advance.
Hi harry973,
Download Service Pack 1 will not convert in a disc in Windows Vista Service Pack 1.
A recovery disk will not be useful to perform an Inplace upgrade to.
You will need the original Windows Installation disc.
If the disc that came with the computer, then it would be a drive OEM (manufacturer). This disk can only be used for a reinstallation of Windows.
Hope this helps! -
while trying to install sketches of painter Corel on 32-bit Windows Vista, I get the message of the CXML File() - > could not IID_iXMLDocument2 instance. After the closure of this msg several times I get the message .xml configuration could not be loaded. This may indicate that the file is corrupted. I tried downloading the software and the software disc and get the exact same message. Does anyone have any ideas as to what is happening and how to fix it?
Hello
· You have an earlier version (trial version) of Corel painter, installed on the computer?
Step 1: If you need to uninstall the trial version and then try to install the full version of Corel painter.
See: http://www.corel.com/servlet/Satellite/us/en/Content/1248977106333
Step 2: I also recommend you contact Support Corel to this topic and see if they have a solution - http://www.corel.com/contactus
-
original title: error message
I am unable to back up windows Vista on an external drive that I am cant get full backup - error 0 x 80070005. How to overcome this please? Thanks for your help. Kay Alexander
Hello
see if this information helps you
How to make a backup of your data (all Vista versions)
http://www.vista4beginners.com/how-to-backup-your-data
How to restore your files
http://www.vista4beginners.com/how-to-restore-files
the 1st link below is how do the backup complete pc (Vista, full and professional company)
http://www.bleepingcomputer.com/tutorials/tutorial145.html
and that is how do to recover the backup complete pc
http://www.bleepingcomputer.com/tutorials/tutorial144.html
and here is the information of microsoft in restoring a system image backup
http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup
If you have problems with the repost of process above in forum microsoft link that is specific to the backup below questions
"This forum supports questions for the default backup utility in Windows Vista, Server 2008 and beyond."
http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads
-
I downloaded the new 9. ? version said to my PC to run it. It said to restart my system which will come into force. Yes, I did. Whenever I try to access the line, it gives me the message that I have to restart my system. What should I do?
Do a cleaning (re) install and delete the folder of the program Firefox (C:\Program Files\Mozilla Firefox\).
Download a new copy of Firefox and save the file to the desktop.
- Firefox 9.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current version of Firefox, if possible.
- Do NOT remove the data of a personal nature when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.
- It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
- http://KB.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.
-
When I put update of windows xp I receive message 2 updates cannot been done here is what I get = - other hardware - Microsoft HID Non-User Input data filter (KB 911895)
-Other hardware - Microsoft HID Non - User Input data filter (KB 911895) CAN
you help me? Thanks when I update my Windows XP, I get a message that the 2 updates cannot be updated. Here is the Microsoft - other hardware - error message HID Non-User Input data filter (KB 911895)
Microsoft - other hardware - HID Non-User Input data filter (KB 911895) can you please help me
AndréHi MrPeanut,
Welcome to the Microsoft answers site.
This problem can occur because the device sends data of strength of signal for Windows. These data can be interpreted as input device real, such as the movement of the mouse, button activity or strikes. Therefore, this transmission can prevent Windows mode 'sleep'. Windows must enter "sleep" mode to activate the screen saver.
I suggest that you update the drivers for all devices on the computer entry. You can update the drivers from Device Manager and check.
See the link for update drivers: update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work-good
If the problem persists, then I suggest that you uninstall the update from Add/Remove programs in the control panel.
Now, download you the link that resets the update reset Windows components from the following link: How to reset the Windows Update components?: http://support.microsoft.com/kb/971058
Now start you the Windows updates and check.
Swathi B - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
original title: Administrator status
Several installed programs give me error messages that they cannot work properly because I'm not the administrator. I double checked with control panel to change my status and I AM ADMINISTRATOR. What is the problem and how to fix this?
Several installed programs give me error messages that they cannot work properly because I'm not the administrator. I double checked with control panel to change my status and I AM ADMINISTRATOR. What is the problem and how to fix this?
Hey Honeybe2
When you want to use the right click on it and run as administrator
Walter, the time zone traveller
Maybe you are looking for
-
What should I do if I think I have been scammed?
I heard that I won a prize, but no matter how I try to claim that it he told me that I need to check ny email that they sent to me, but no email was sent. I tried 3 times and no still no e-mail. What should I do?
-
Satellite Pro C660 is not commissioning
HelloDeploy a satellite Pro C660, who decided that he no longer wants to start. When you press the power button, the green light turns on and the fan begins to hum, however, the laptop does not have to go through the routine of the POST and everythin
-
I use XP pro SP3 and ntldr is missing, I have inserted my XP CD and went to the BIOS setting to boot from the CD-ROM. But I could not access the repair installation process because my computer is returned to the screen with the message "press Ctrl +
-
Error 102 invalid Namespace - Flash Builder 4.5
Hello everyone I have the following error when I try to run/debug a type helloword on the playbook Simulator application.
-
Module security content to ASA - SSM - CSC
Hello Is it possible with this module to filter some users filtered (as restricting facebook.com) and other unfiltered? I mean if the user based on filtering is possible? THX