XP SP3 ntdlr is missing!

Similar Questions

• XP installs - ntdlr.dll missing on the Satellite P300-133

  We bought the satellite P300 with preinstalled Vista. It worked fine except for some major programs for hardware configuration in our society.

  So, we tried to install XP Professional on the primary partition that has been formatted before that. The blue screen where XP installs its files (after you have created the partition and formatting it) on the end to 99%, it says 'missing ntdlr.dll '.

  We first tought it has something to do with the SATA compatibility mode which we configured in the BIOS to cause driver AHCI missing on the XP CD. Then, we did a backup CD with nLite with the SATA drivers installed and run the AHCI mode.

  The same problem at the same point. I DIND'T try with another copy of XP but I know that it (a month old scratch free original CD) works very well because I installed it on another laptop front.

  The only thing that is strange od these partitions are mixed to the top. The partition where Vista was before is now D, it is also the reader where we tried to install XP, C is not the car with all the previous system backups and F it seams to be the Vista installation files.

  Please any suggestions, its very urgent
  We need this computer next week.

  Hello Peter

  Fun to read and I thank you for the reply.

  If you have any problems, post.

• Satellite Pro L630 - NTDLR missing

  Hello

  Having a Satellite L630 which I installed WinXP (compatibility mode) and finally installed CheckPoint Full Disk Encryption (FDE) 7.3 HFA1. Restarts, she now comes up with an error "NTDLR is missing." Before installing the EDF, it was fine.

  It was over on the Satellite U400, A10 and other models, and all have taken the DIP in the same method/procedure fine.

  Any ideas?

  Hi Mohsin.ikram,

  I have never heard of this dip Financing program, but if this happened directly after installation, it seems to be a problem of compatibility of FDE tool and has nothing to do with Toshiba.
  Looks like that it messed with the registry

  You can start the computer in safe mode?
  Otherwise you have to reinstall Windows I think

• Qosmio G30-161 does not start - NTDLR "file is missing

  Hi all

  I have a G30-161 double HDD (in Raid 1) which no longer starts...
  He just gives the message "file NTDLR is missing" and is followed by a prompt to restart the computer in which the same error will appear again.

  I got this laptop for my son to fix (lucky me :(!)

  Things, I've looked at so far:

  -Check the BIOS to see if the disks are configured properly - BIOS indicates the two hard drives installed, online and in RAID 1
  -J' had an installation of Windows XP by hand disc then tried to see if it would boot from a CD. He started on the CD ok, but the process Windows Recovery Console/install said he couldn't find any hard drives. Find an Acronis True Image boot disk (using linux I think), once again the started program end, but don't have it no hard drives installed.
  - So with no HD not reports I took one for a test. With disk 2 removed, in an attempt to start the system reports "RAID 1 is GRADIENT" then follows with "NTDLR file is missing. So this tells me that SW RAID working probably and he knows that a HD has been removed.
  All the patches I've read on the PC forums involve the use of the XP Recovery CD or some, but it won't work because the system thinks there are no disc when it starts. We have no ' have a Toshiba Recovery disk for the machine.

  Someone at - he saw the problem above, knows a fix?
  Can I purchase a G30-161 recovery CD anywhere?

  Any help appreciated. ...

  Thank you
  Steve

  Hello

  Looks like your drive is loked I found a thread in forum about the same error message and the user mikeptag posted a solution:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?forumid=58&ThreadId=24051

  I didn't test this procedure and, therefore, I don't know m if it can help you or not, but in my opinion it's worth to try

  Check this box and post your results

  Good bye

• Tecra A3 (PTA30E) - some missing drivers after reinstalling XP

  Hello

  Ive had my tecra A3 PTA30-E for some time now and the built-in wireless has always worked.

  Last month, I got a fatal error on my XP SP3 (damaged or missing ntoskrnl.exe) and wouldn't boot, I finally followed the fault to a sector corrupted on my HARD drive. After a complete format and reinstallation of XP SP3, I have my laptop in service again but less my wireless and my wired network adapters and a couple of other devices. I used the pilot site to download all my drivers and BIOS update toshiba and installed it all. Ive got most of the work including my ethernet devices so that I could connect to the net via a cable.

  Then I wanted to install the drivers on the wireless but when I look in device manager theres no wireless option and its not in "network adapters" either. The switch at the front of the laptop for the wireless is on and the light is lite and fn + f8 does nothing

  I even tried the Toshiba diagnostic tool and comes as all the drivers and cannot do not regiester built theres in wireless is

  I have still 4 devices that were not installed ("other devices"? ") and they are"
  ? multimedia audio controller
  ? network controller
  ? video controller
  ? video controller (vga compatible)

  I tried to download all possible wireless LAN drivers and place them in a folder and then said he's looking for the driver for the '? network controller "in this folder, but it is not installed as no driver found."

  Is it '? network controller "my case, nothing to do with the wireless or wireless card?"

  Suggestions welcome as I exhausted on this one

  Thank you very much

  Nick

  Toshiba Tecra A3 - XP SP3... Toshiba Tecra A2 - LinuxPuppy

  Hello

  First network controller can mean both LAN or WLAN card. If you check the vendor and device ID in Device Manager, you identify which device it is exactly. So please check the Web from Toshiba site for drivers:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  As far as I know multimedia audio controller means that the audio driver and the display driver video controller.

  But just one question: why you n t use the Toshiba Recovery disk? There are all the pre-installed drivers.

• Can not install SP3 more?

  I understand that Microsoft announced that installed XP without SP3 system wouldn't receive Windows Update.  Recently, one of the Windows XP systems that I had the problem and it has not been resolved until I uninstalled SP3.  I thought that no update would be done automatically by Microsoft.  To my surprise, many updates have been automatically downloaded and installed, even including the SP3.

  So what Microsoft note really means?

  Support for WinXP SP2 ended July 13, 2010. "Computers running WinXP SP2" will no longer receive software updates from Windows Update "[i.e., the updates published on and after August 2, 2010 until SP3 has been installed.

  [Translation: If has not been installed SP3, you would miss eight critical updates months of security.]

  Extended support for WinXP SP3 will continue through April 8, 2014.

• SCSI driver is missing in the virtual machine. Driver is missing in the provided website. Instructions on how to install the driver (once you find) are missing.

  I get the text following error encrypted every time that I boot Windows XP in VMWare Fusion, since I've upgraded to version 4.02 a few months ago.  So I upgraded to version 5.02 hoping the error would go, but he didn't.

  When I try to start it, it says "he has at least a virtual SCSI device installed on this virtual Windows XP computer.

  Windows XP does not include the drivers for the card SCSI BusLogic VMware Fusion uses virtual SCSI devices.
  To use these virtual SCSI devices, install the VMware driver in the virtual machine. "Download the driver of"http://vmware.com/info?id=43"."
  Once I have to dismiss the message, everything seems to work properly.  How can I make this message disappear?

  I tried to go to the useless link that is provided (http://vmware.com/info?id=43), but it takes me just for a general download for all VMWare products page.  Then I tried searching for "SCSI" but it does not have the driver, I'm supposedly dedicated research

  After doing a bit of searching around, I finally found a driver called "vmscsi - 1.2.0.4.flp ', I connect to my virtual floppy drive.  Once I did, my virtual machine wouldn't boot (I get the error "NTDLR is missing.)  I then unplugged the virtual floppy drive, and now my virtual machine starts again.  I then re-connected the drive floppy and discovered the following content:
  Disk.Tag
  Txtsetup.OEM
  vmscsi.cat
  vmscsi.inf
  smscsi.sys
  OK... Now what?  No installer?  What the hell am I supposed to do with it?  I tried a double click on all of these files and have no significant results.  When the pilot is supposed to go?  No instructions? -What VMware calls "support"?

  The VMware Tools GUI has been removed because it has now integrated with the Virtual Machine settings, however you can still use the command line.

  C:\Program Files\VMware\VMware Tools>vmwaretoolboxcmd help
  Usage: vmwaretoolboxcmd  [options] [subcommand]
  Type 'vmwaretoolboxcmd help ' for help on a specific command.
  Type 'vmwaretoolboxcmd -v' to see the VMware Tools version.
  Use '-q' option to suppress stdout output.
  Most commands take a subcommand.
  Available commands:
     device
     disk
     script
     stat
     timesync
     upgrade (not available on all operating systems)
  

• Qosmio - G30-163 NTDLR missing Win Xp

  Hello

  my laptop has 2 hard drives and the first (primary) a Windows XP MCE.
  On the senond one I install WinXp SP3 and two of them are running OK.

  The question is if I unplug the HARD primary with WinXP MCE disk and only works with XP SP3?

  When I disconnect the hard drive Win Xp MCE main location and start the laptop says NTDLR MISSING.
  And after when I connect the HARD drive Win XP SP3 on the main location the same error occurs.

  Thank you in advance.

  You have active RAID? Take a look in the BIOS on Page 3.

• DC 7900 SFF: Missing driver for DC 7900 SFF Windows XP pro SP3

  Hello

  I already read this post: http://h30499.www3.hp.com/t5/Business-PCs-Compaq-Elite-Pro/DC7900-SFF-Drivers-for-XP-Professional/td...

  But unfortunately it does not solve my problem with a driver missing on the relocation of a Windows XP Pro SP3 with the DC 7900 SFF.

  The missing pilot is linked to:

  PCI \VEN_8086&DEV_ 3 A 02 & SUBSYS_3034103C & REV_02

  Everything else seems fine.

  If someone could give me some information or links to the correct drivers, would be great

  (already tried most of the available drivers on the HP site for this model)

  Thank you!

  Hello:

  This hardware ID decodes the Intel ICH10D / DO SATA AHCI Controller.

  The chipset installation utility should be installing this product...

  https://Downloadcenter.Intel.com/download/20019/INF-Update-utility-primarily-for-Intel-6-5-4-3-900-series-chipsets

• Missing or corrupt files after the installation of the SP3 for XP PRO

  Norton Anti virus history shows no deletions of these files.

  * original title - I have missing files or damaged after the installation of the SP3 for XP PRO. These are files of driver for my DVD player and Camera.Specifically [dcptp.sys] can not be consulted online *.

  And have you tried to reinstall the DVD software & camera?

  Why SP3 was installed years ago?

  Currently, the computer is fully patched to Windows Update?

  ==========================

  Device Manager and network connections may be blank after you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/953791

  Device Manager may not show all devices and network connections may not display network connections after installing Windows XP Service Pack 3
  http://support.Microsoft.com/kb/953979

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Missing windows components in the administrator group policy templates. XP Pro SP3

  Miss me some of the windows components in the computer configuration > Group Policy administrative templates. How can I get back them? XP Pro SP3

  If you click on administrative templates, add or remove templates do you have right to have these models:

  CONF
  Inetres
  System
  Wmplayer
  sooper

  If this isn't the case, you must add them as described above.

  For example, if inetres does not appear in the models (so, you must add), you won't see any substance IE under Windows Components.

  Take a look at templates that are installed on the system that works and compare them to the distressed system.

• Bootsect.dat file is corrupt, NTLDR is missing/compressed on x 86 pc with Windows XP Home Edition Sp3 and Ie8

  I have a x 86 pc with Windows XP Home Edition SP3 and IE8.

  While preparing for a possible update for Win 7, I thought repartioning and "multiboot" my HARD drive.

  I tried to get WinXP operating as best I can.  I was also check out how to use the Windows Recovery Console to reinstall WinXP and transfer files to a clean reinstall.

  Found while searching "All boot paths" to Start\Run\msconfig\BOOT. INI that one boot path has been highlighted with errors indicating that "file is corrupt because playing a disc error has occurred" and that NTLDR is missing or corrupt.  In fact, it is blurred.  It points to "Recovery Console Microsoft Windows/cmdcon.  I've not used the Recovery Console, ever.

  I have a desktop Gateway 5310 S (detail) and no original XP disc, apparently.

  I have, but never used, a 4ea. set of recovery CD as of 12/05/05 I need to have created after purchase.

  I also had many, odd, problems that come and go, including worth displaying various websites, Yahoo Home Pages and E-mail that keep switch to compatibility mode or outright deletion.  The video and audio on Hulu and video-on-demand online services are always out of sync.  I have problems with editing posts on sites like this even if I can edit my profile fine pages.

  This particular set of problems started recently and very suddenly, from one day to the other.  It was after he worked actually pretty good for a change.

  I don't know how long the boot.ini file has been damaged, I actually discovered by chance.

  I can also not to reinstall some programs such as Family Tree Maker 2005 and 2008, when it was suggested to me by ancestry.com to uninstall/reinstall.

  I have the latest Java and Adobe Flash Player.  I've defragged and disc verified my discs.

  I used CCleaner to delete temp and unwanted files per day.  I ran Hitman Pro, MBAM, MBAR, MSE and SAS several times without detected virus or malware.

  And, as I mentioned above, I have problems with the editor of this site, right now.  Sometimes it just freezes and I have to leave to clear.  Other times it's duplicating entire sentences.  He also flip/flip flops between a Publisher full page and, as now, a half page window of the editor on the half left of the page.

  Suggestions from what people you can come would be greatly appreciated.  This gets really annoying.

  Thank you

  Vernon

  When you check the paths in the boot.ini file, and the recovery console is installed, you will always get an error message indicating that the startup path is not valid.

  If the recovery console is actually corrupted just to uninstall, you can reinstall or burn a cd with the recovery console.

  go here for instructions on deleting the recovery console.

  ===========

  Here's how to make a bootable xp recovery console cd

  Courtesy of JoseIbarra

  You need start by booting in XP using a CD Recovery Console, you can do (no XP media required) and run a chkdsk with error correction command enough times until it is clean and if it does not, you can create a new boot.ini file (this is usually one of two things).

  Here's how:

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget what you have (no XP media required).

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  RC. ISO

  Download the ISO from here:

  http://www.thecomputerparamedic.com/?p=8    (courtesy of Daavee)

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient. If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  ===============

  as for the other problems:

  did you use Registry cleaners?

  These can damage your system

  You seem to be free of infection, it would seem that a part of your process cleaning has removed a necessary file.

  ===============

  Checkdisk with parameter/r should be run. and run it again until there is no error.

  ==========

  you are fully updated and patched to Microsoft updates?

• some files are missing from xp sp3 I downloaded

  some files are missing or corrupt SP3 settup I downloaded please help

  Hi SparshKumar,

  I read your question, so you mean you have download Microsoft Windows XP SP3 hotfix, but when you install SP3 when met some files were missing/corrupted, right?
  Can you tell me where do you have SP3 patch? If you do not have the SP3 patch since an offcially, I think you should have to try to get it from offcially Web sites, here is the download link:
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

• Windows updates has shown installation but when checked 0kb installed and the icon was missing from the tray (Win XP sp3 IE6)

  original title: another missing Windows updates missing yellow icon (Win XP sp3 IE6)
   
  I'm having the same problem also.

  Windows XP sp3 with IE6. All updates applied excluding this last batch with the numbers you mention, except for two of them.

  I can tell you that, just as usual, the yellow icon was present when downloading these updates were. Then he disappeared after that that they have been fully downloaded.

  Interestingly, I went to Microsoft Update to check to see the new updates and found downloaded after checked for updates, BUT when I dropped down the details for them they all showed 0 KB!

  Here are the updates, that he sent to me (last

  Ko

  2559049

  2567680

  2566454

  2562937

  8900380

  2570222

  2536276

  and the MSE customer update kb 2544035.

  The only one who showed no 0Ko was a MS Security Essentials client update number kb2544035 with 7kb.

  I tested two updates from win xp to see if they would be set up and they did, here are the numbers... .kb8900380 and kb2567680

  kb8900380 is the edition of August 2011 of malware removal tool.

  I tested and found that it was actually installed and worked.

  Just one thing. I noticed on restart every time the yellow icon appears in the status bar but only flashes for a second or two, then

  disappears once more. I tried to quickly click on it but it does not.

  I then checked the taskbar customize notification and I found that it presents itself as an element of the past and said that it is associated with the download of updates.

  Syed N:

  Thanks for your suggestions.
  I wanted to post back to update everyone on my current situation.
  I was going to ask your manual correction of the WSUS... when I got home tonight. However, at the start of my PC tonight the Automatic Update icon (yellow) was actually download updates once more and things work like they are supposed to. After the download, the icon shows the balloon which informs you that you have updates available and when I clicked on the icon it was admissible and that it took me to the menu as usual at the.
  Then, I tested several updates in the menu of the AU and downloaded. They were installed properly and allow them left unchecked the icon stay in the tray as usual.
  I don't know what happened, but things are now correct.
  You have an overview on why things "fixed", I would be interested to know the why of it. !!!!!!! It is interesting to me.
  Maybe the MS is really followed this site and or you guys relay these flaws in MS for the correction.
  Thanks for your suggestions, I've forgotten to be able to reset the update components!
  Finally, Syed:
  If you can relay the suggestion to MS. I always liked Windows and like the superior ability I have to control aspects of it unlike OSX (Apple MAC) however the link low is a win (including 7) WIndows update mechanism. I was lucky for me and my family, I'm enough common sense to know how to apply updates to avoid the problems of the operating system, but not everyone has this education and too many times same own OS Win with very little in option programs/software and hardware drivers downloaded) have more up-to-date flaws then seems reasonable.
  I would like to see MS improve WSUS and also more importantly still provide and ENCOURAGE users to take and the advantage of teaching material that MS can offer users to consumers.
  PA bear:
  Also thank you for your suggestions. I didn't know that MSE is a culprit in this issue, but you never know.
  I have

• SP3 will correct a missing System 32 file problem?

  I have been cheated by removing

  C:\Windows\System32\rundll32.exe

  as a result of something being allowed in my computer because of what I perceive as a failure of my anti-virus program.

  I can access Internet, but not my MS Office 2007 applications.  If I download and install SP3 on my PC it will restore this missing file?  Or is there another way to go about it - I tried to copy the file into another folder where I found the System 32 folder and that did not work.

  Thank you!
  

  I downloaded a copy of the file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32
  c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

  Here is the link to my SkyDrive and you can get the file you need here:

  http://CID-6a7e789cab1d6f39.SkyDrive.live.com/redir.aspx?RESID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you will not see the extension of file (.exe, .dll, .cpl, .sys, etc), but when download you them they will have the right extension.

  You have to put the downloaded files in the correct folders on your system.

  That may not solve all your problems, but at least you will be spending this part and we can then fix the rest