my windows vista machine began to start repair, what do I do

Similar Questions

• my laptop hp dv5 with windows vista home premium series starts do not

  my laptop hp dv5 series with windows vista home premium not starting not, despite several presses of the power button that only a white screen appeared only to nd 2-3 seconds then the system crashes.all started last night, when the electrical connection cut (no battery attached to the laptop). in the morning when I tried to start it, the led light of the charger pin on the beds for laptop for about 6-7 seconds nd then turns off. When I pressed the power button with the connected charger pin, it does not start, BUT when I joined the battery wid, the light (power) led to turn it on mobile to the top but the led on the pin of the charger turns off after a few seconds. SA is NOT SHOWING anything on the SCREEN EVEN AFTER PRESIN F11 etc please help

  Hello

  Power outages often lead to problems of material with computers / laptops.

  If there's nothing on the start screen (HP Logo, etc.) at startup, you may have a hardware problem.

  If under warranty contact HP.

  If this isn't the case, under services, contact a repair shop, local.

  See you soon.

• I want to upgrade to a newer Windows operating system Windows Vista Home Pro 64-bit. What is the recommended procedure?

  * Original title: upgrade

  I want to upgrade to a newer Windows operating system Windows Vista Home Pro 64-bit. What is the recommended procedure? I see that Windows 7 or 8, a free update to Windows 10 is offered. Should I buy 7 or 8 then you spend 10 or just buy 10?

  Thank you

  Jim

  Hello

  Depends on hardware configuration required on later operating systems, and also find out if the manufacturer of the laptop computer is supported and provides drivers for operating systems later as to whether it is possible or feasible to upgrade or not.

  There is no free upgrade Vista to 7, 8.1, or 10.

  Follow these steps before you buy Windows 7.

  Microsoft sells more than 7; Try Amazon.com.

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  «Installation and reinstallation of Windows 7»

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  @@@@@@@@@@@@@@@@@@@@@@@@

  Follow these steps before buy you and upgrade (new installation) of Windows 8.1.

  Microsoft sells more than 8/8.1.

  Try Amazon.com, etc.

  Check if the manufacturer of your computer/laptop has Windows 8.1 drivers available for your model.

  If this is not available, Windows 8.1 not install and work properly for you.

  There is a lot of information in this first link from Microsoft:

  Download and run the Windows Upgrade Assistant 8.1 of to see if your machine is compatible Windows 8.1 and read the update for Windows 8.1: FAQ here

  "Update to Windows 8.1: FAQ".

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

  "8.1 for Windows system requirements.

  http://Windows.Microsoft.com/en-us/Windows-8/system-requirements

  @@@@@@@@@@@@@@@@@@@@@@@

  How to buy Windows 10:

  http://www.microsoftstore.com/store/msusa/en_US/cat/Windows/CategoryID.70036700

  But first make sure that you have the correct configuration and your computer manufacturer provides the right drivers for 10.

  https://www.Microsoft.com/en-us/Windows/Windows-10-specifications#sysreqs

  " System requirements Windows 10"

  https://www.Thurrott.com/Windows/Windows-10/3884/Windows-10-system-requirements

  Microsoft deploys Windows 10 available as free upgrade to Windows 7 features, Windows and Windows Phone 8.1 8.1 qualified. It will be available from July 29, 2015

  "FAQ Windows 10.

  http://www.Microsoft.com/en-us/Windows/Windows-10-FAQ

  See you soon.

• Toshiba Windows Vista operating system to start, Safe Mode doesn't work anymore. How to save the personal data of the computer that won't start.

  I have a Toshiba laptop with windows vista: the OS home.

  Recently, the operating system wouldn't start up, there will always be on the page of the logo 'miscrososft society '.

  I tried F8 to start safe mode, safe mode started but will load some files and stay on this page forever.

  I tried to run the system repair, the report is as follows:

  Signature of the problem:

  Event name: Startup Repair V2

  Signature of the problem 01: breakdown car

  Signature of the problem 02: 6.0.6001.18000.6.0.6001.18000

  03:6 problem signature

  Signature of the 04:851981 problem

  Signature of the problem 05: corrupt and registry

  Signature of the problem 06: corrupt and registry

  Signature of the 07:1016 problem

  Signature problem 08:3

  Signature of the problem 09: Rollback register

  Signature of the problem 10:0

  Signature of the 11 problem: 6.0.6001.2.1.0.256.1

  Signature of the 12:1033 problem

  I tried to use system restore, but he says he has not found a moment of restoration which is good.

  The main concern right now for me is to get my personal data and files on the computer.  I still have another computer to use, so I'm not so worried about starting the computer.  I want to find a way to the first backup of my personal data and files from the computer to external devices, then try to repair the computer.

  Thank you.

  Hi DreamMeng,

  You can try to use third party software to back up data and check.

  You can use your favorite search engine to navigate on the third-party data backup software and that the software allows to save data.

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  You can also make contact with the Local Techshop for assistance to the protection of the data.

• Windows Vista will not complete start up

  Help

  me

  cant

  beginning

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  and if all else fails and you need to reinstall vista are the normal methods for computers preinstalled vista portable

  Contact the computer manufacturer and ask them to send vista recovery discs

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

• Automatic Windows Vista updated and now starts earlier... what now?

  My (gateway) computer has Windows Vista and the eve of the last auto update.  When I tired using the ' puter pass the pointer with the mouse controls, but the buttons do not work.  I tried to restart the computer and it wouldn't restart.  I tried to restart the computer in safe mode and... no joy.  Now when I try to reboot, I get an error message "STOP: 0X000000ED" what to do now?

  Thank you very much!

  Mike

  Hello

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  and if this fix it change how do I get the updates to find the problem and do a right-click on UAC prompt then hide

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  or

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

• Windows Vista - Laptop Will NOT start properly

  I'm trying to fix laptop from my friend and I ran into a dead end, trying to get this thing to start properly. It's a laptop of Dell Inspirion used (model pp26L).

  From it normally of the results in a blue or white screen. When I go into the Advanced Boot Options, I tried "last good known Configuration (Advanced) and it goes to the black screen and does not change for hours." I also hit 'Repair your computer' and it brings up a window that is titled "System Recovery Options: RecEnv.exe - Application Error" and said, "the instruction at 0x775c6295 referenced memory at 0x00000000. The memory could not be written. Click on OK to terminate the program. »

  I don't know what I can do at this point because I'm not too familiar with Windows Vista anymore. My friend cannot afford to buy a new laptop so I hope someone here can help me solve this!

  UPDATE: if I managed to get "Last good known Configuration (Advanced)" to work, but it left me with a window titled "Startup Repair" that says "Windows cannot repair this computer automatically".

  I don't have a Vista CD or whatever it is attached to the laptop. Everything that I have this thing is the laptop and the charger.

  The attached image is the screen that arose after the publication of the Startup Repair tool window.

  Run Dell F12 diagnostic tests. For the Inspiron 1420, follow the instructions here:

  http://dellwindowsreinstallationguide.com/F12-Preboot-Diagnostics/#older-systems

  If diagnosis then go to rescue all important data using a Linux Live USB:

  http://dellwindowsreinstallationguide.com/data-recovery-using-Fedora/

  https://www.youtube.com/playlist?List=PL1RkaknDn7v-Ucth4gt0U3BHVSY7oNkWr (video 9)

  Windows Vista is actually the end of life and is not an operating system that should never be used again. There is no official free update for 10 Windows in Windows Vista, but it is a unofficial free upgrade path via the preview Windows 10130 Insider. The Inspiron 1420 must run Windows 10 64-bit with no problems. Follow the instructions here:

  http://dellwindowsreinstallationguide.com/Windows-XPVISTA-%E2%86%92-Windows-10-free-upgrade/

  https://www.YouTube.com/playlist?list=PL1RkaknDn7v8RDvZUZBKQnuIVM_cqbgs3

• What to do with my computer laptop windows vista which does not start? He gets a screen before before her windows error recovery screen restarts.

  Tittle says it all, I tried safe mode and the rest of them, but I can't start

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• My Windows Vista laptop does not start successfully after the upgrade to SP1

  I use Windows Vista Home Premium. I've updated my laptop with Vista service pack 1. After that my laptop will not start, it displays a message saying "Service Pack did not install. Restoration of the changes. Do not turn off computer. "after windows loading and then the computer restarts and the same thing repeats. I also didn't get a vista CD or a restore with my laptop CD. I tried a solution anywhere, but I couldn't find one. Please help me quickly because I do all my work laptop and I don't don't want lose my files.

  Perhaps you should review this KB

  Things to know before you download Windows Vista SP1
  http://TechNet.Microsoft.com/en-us/windowsvista/bb968859.aspx>

  Information about Windows Vista SP1
  What you need to know before you install Service Pack 1
  http://support.Microsoft.com/?kbid=936330>

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366>

  How to uninstall Windows Vista SP1 as a troubleshooting step
  http://support.Microsoft.com/kb/948537>

  Windows Vista Service Pack 1 is not available for installation from Windows Update and is not offered by automatic updates:
  http://support.Microsoft.com/?kbid=948343>

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx>

  Windows Vista Service Pack 1 standalone installation) (KB936330)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=b0c7136d-5ebb-413b-89c9-cb3d06d12674&displaylang=en>

  Go to your retail store, they should have the disk recovery for you or you need to go to your manufacturer directly because the manufacturer is best qualified to support the software that the manufacturer has installed on the hardware, provide your serial number and order the CD on their part. I bet they arrange an expedition to the France and tax treatment for it, but should not be too much.

  Note: The manufacturer was required to provide a way to reinstall Windows. If it is not a set of disks with the computer, there will be a hidden restore partition (do not be confused with the system restore), you would use to return the computer to the State of the OOBE (Out of Box Experience).

• Problem on how to Set Up Windows Mail 6 with Gmail on Windows vista machine

  To all,
  when I try to send a mail to test (from OE) I get the follo box pop up to wing:

  Windows security

  Connect to imap.gmail.com

  Ask

  User name & password

  Machine of Windows vista

  Version of Windows mail (6)

  Nortorn 360 version (4.4)

  Here are my settings under accounts:

  Account

  mail (default) IMAP.gmail.com

  General

  Properties

  Mail account - imap.gmaill.com

  Servers

  Information about the server

  Server IMAP incoming mail server

  Incoming mail (imap) imap.gmail.com

  Outgoing (SMTP) mail SMTP.gmail.com

  Outgoing e-mail server

  My server requires an authentication-"verified".

  Advance

  The Server Port numbers

  Mail (smpt) outgoing 465

  Mail (imap) incoming 993

  Thank you

  Under servers
  Under incoming mail server
  Changed my name password user & my username & password Gmail
  Everything seems to work

  Post closed

• Windows Vista... Starting problems

  I left my computer, but he died later have not used for some time. For about two weeks I gave it like that. When I pressed the power button, it picked up windows as usual and then frozen to the password screen. I turned off the computer by pressing the power button. When I turned it back on it does not boot to vista. I unplugged everything and then through the steps. He brought me to a black screen where I left it sit for 10 minutes, then a message from the displayed Windows Boot Manager saying windows had encountered a problem communicating with a device connected to your computer (my hard drive). I need to start because he has videos of my nephew on them and I don't want to lose them. Is there something I can do?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  What to do if Windows does not start correctly

  Because the resolution of the problems of system is a complex process, and hardware and software configurations can vary considerably, there are many approaches you can take to solve problems that might prevent Windows to start (boot) correctly

• When I try to use transfer of files on my Windows Vista machine, I get an error saying that "this update is not available."

  I have a new Win 7 laptop and want to transfer the files from my old Vista laptop. Recently I used Easy Transfer and a USB cable to do this on a machine for the wife swap so I know it works. However, when you try to load transfer them easily on my Vista machine, I get an error message that says that this update is not available. Anyone know what is the cause and what is the solution?

  original title: Windows Easy Transfer problem

  Hi Michael,

  1. you try to download Windows Easy transfer?

  If you transfer files from Windows vista to Windows 7, you don't have to download Windows easy transfer.

  In Windows vista and Windows 7 windows easy transfer is incorporated.

  You can check the following items and check if it helps.

  Transfer files and settings from another computer

  Transferring files and settings: frequently asked questions

  Hope this information is useful.

• Windows Vista machines can see XP machines but cannot communicate with them.

  original title: VISTA machine can see XP machines in local network, cannot connect

  I have a 3 computer home network that has worked very well for many years, but it is usually just used by 3 machines to access the Internet.  Very rarely a computer does enter a file out of one of the other machines, but this feature has certainly worked in the past.

  Machine 1: Desktop/VISTA/setting up a connection to the router

  Machine 2: Desktop/XP/setting up a connection to the router

  Machine 3: Computer connection laptop/XP/wireless to the router

  All the machines, automatic update of Windows and all the computers are running Norton Security Suite, which is also updated automatically.  Norton Security Suite is a relatively new introduction to the network.

  2 XP machines see that all 3 computers in the network each has access to the other.  2 XP machines can not "reach" the VISTA ("the network path was not found") which could be correct, because machine that I never shared something on this machine, although sharing file and printer sharing * are * on.

  On the VISTA machine click on network and sharing Center and then see the full plan shows 3 machines in the group.  But, then clicking on view computers and devices results in the network window, which shows that the VISTA as a computer machine and a media device.  No XP computer to connect to.

  The VISTA machine can ping machines (Machine 2 ping or ping Machine 3) XP, but XP machines can't ping the VISTA.  In fact, it's quite strange; If I 'ping Machine 1' of one of the machines XP ping command reports "Pinging Machine 1. (Name of working group) "[208.68.143.50] with 32 bytes of data", then he received 4 requests, responses has expired.  I have no idea where this name - the name of my PC added on behalf of the Working Group - and the IP address belongs to a computer somewhere in Massachusetts!  (I'm in California).

  Rattling of the VISTA machine using its IP internal, as reported by the router just translates into 4 requests, responses has expired.

  I worked on it for hours now, after trying all of the 'standard' patches with no improvement.  Given the Windows error message when one of the XP machines trying to access the VISTA - "the path not found network" machine as opposed to they access denied response - and the ping odd response when you use the name of the machine, I have the feeling that the things in the list of standard control is not the problem.

  Any thoughts?

  Tom Young

  I finally reduced to the Norton Security Suite firewall.  Don't think that was the issue that the 2 XP machines are also running Norton Security Suite and is working very well.  Penetrating machines XP 2 'Total confidence' confidence level - which doesn't seem to be necessary according to the news 'aid' to Norton that I read over and over again - cured the problem.

  Tom Young

• How to install MODI on my Windows Vista machine?

  If MODI can not be installed on my vista machine, Microsoft offers a different product or a solution?

  Hello

  By MODI are you referring to Microsoft Office Document Imaging?

  See also the below mentioned link.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=22333

• Reinstall Windows vista update will not start

  I just tried a reinstall upgrade, at the end of the upgrade process, vista keeps loopng at the microsoft display Corp. If I try to enter in vista safe mode loop again after loading a file called avgidseh.sys. any ideas on how to solve this problem?

  Try a new installation

  How to clean install Windows Vista with upgrade Media
  http://www.ZDNet.com/blog/Bott/Vista-hands-on-4-clean-install-with-an-upgrade-key/196

  J W Stuart: http://www.pagestart.com