Vista fails to boot normal will start in safe mode

Similar Questions

• After having upgraded to Firefox 24 it now won't start at all after clicking on the icon. My OS is Windows Vista premium. It will start in safe mode.

  Upgrade to Firefox 24 and now nothing works at all despite uninstall it and reinstall several times and lose all my favorites etc. However, it does not start in safe mode. At first, I thought it was my Norton 360 Security, but after 2 hours in contact with them, I'm still in the same position. When I double click on the Firefox icon I see the moment where the cursor and then it disappears and nothing loads.

  My OS is Windows Vista Premium and I use Windows internet explore for the time.

  HELP Please!

  Thank you nellus91.

  I used the Microsoft Safety Scanner first, and it found nothing. I then used TDSSkiller and he found the problem.

  Problem solved.

  Thank you.

• Cannot start in normal mode - will start in safe mode.

  Original title: laptop does not charge on CD only works in safe mode

  Laptop will not load on CD only works in safe mode

  I have a compaq presario c700 laptop computer does not load the operating system and goes directly to the start of the repair screen. From the start, I have Windows could not start. A recent hardware or software change might be the cause of the message... I tried the system restore. I can only access it through safe mode. I can't solve the problems with one of my CDs such as fix it utilities, Hi Jack this etc... I copy everything on the drives to an external drive. Suggestions as to how, I can start over with this laptop?

  Hello

  If you have backed up your data, press F11 at startup to start the process of recovery back to factory settings

  It is normally the button in HP products

  and read the information on the usual ways to reinstall vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Intel IMSM stopped working - restarts when in normal mode and will start in safe mode

  My husband's laptop computer does not in law, its starts to load in and windows then comes with windows has a problem and closes, then it will try to restart. I put in safe mode and check the problem and solution page and it comes up with Intel IMSM driver does not work correctly and tells me to go to the site of ASUSTek computer to download the latest version, I've tried and tried but makes no different. Tried to pass on the ASUS site but still no luck and it doesn't load in the ASUSTeK recovery disk that cam with it. Any ideas. Thank you. Alison

  check this
  BTW I did a clean boot

• Windows Vista Basic, 32 bit, does not start up-will start in safe mode

  My computer fails to start. This problem came about 2 weeks ago when I rebooted after an update for McAfee Total protection requiring a reboot. But I don't know if that is why the computer not boot not correctly.
  After a lot of testing to the Startup Repair and shut down the pc and start it again, it starts to open a session for users. But after that I restarted again in this State, the problem persists.
  There is no error codes or messages, it just does not start. There is no virus infection (I hope). While the pc is booting, I also connected to Admin and checked if there were any problems found. But no other problem than a problem with Teredo Tunneling Pseudo - Interface. I solved this problem.
  So after all these checks, I restarted again, and it will not start again.
  It starts in Mode safe with no problems, and I have restored the pc a couple of times, but no use.

  Y at - it a fix for this?
  Any help will be very appreciated!

  Thank you

  Hello RubeenaY.

  After looking on this thread. the most remarkable thing I've seen, is that we are able to boot mode safe without problem. Typically, this means that we cannot start because a driver, service, or application takes over at startup which prevents our normal operation.

  I recommend you to perform a clean boot, as they did in the previous post.

  More information on Boots own is located at the following link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Let us know how it works.

  Best regards

  Matthew_Ha

• X 200 freezes at welcome screen - will start in safe mode and then work after reboot

  How can I fix it?

  that is the 'not a not load driver x' questions?

  sincere friendships & thank you in advance for your answers and advice!

  PS: and UM YES - of course I have NOT a CD Rom drive or anything of that sort...

  This is the illegal product:

  ---------------------------------------------------------------------------------------------------------------------------------

  Microsoft (R) Windows (R) Version 6.1 (Build 7600)
  10:10:15.375 26/10 2010
  Loaded driver \SystemRoot\system32\ntkrnlpa.exe
  Loaded driver \SystemRoot\system32\halmacpi.dll
  Loaded driver \SystemRoot\system32\kdcom.dll
  Loaded driver \SystemRoot\system32\mcupdate_GenuineIntel.dll
  Loaded driver \SystemRoot\system32\PSHED.dll
  Loaded driver \SystemRoot\system32\BOOTVID.dll
  Loaded driver \SystemRoot\system32\CLFS. SYS
  Loaded driver \SystemRoot\system32\CI.dll
  Loaded driver \SystemRoot\system32\drivers\Wdf01000.sys
  Loaded driver \SystemRoot\system32\drivers\WDFLDR. SYS
  Loaded driver \SystemRoot\System32\Drivers\sptd.sys
  Loaded driver \SystemRoot\System32\Drivers\WMILIB. SYS
  Loaded driver \SystemRoot\System32\Drivers\SCSIPORT. SYS
  Loaded driver \SystemRoot\system32\DRIVERS\ACPI.sys
  Loaded driver \SystemRoot\system32\DRIVERS\msisadrv.sys
  Loaded driver \SystemRoot\system32\DRIVERS\vdrvroot.sys
  Loaded driver \SystemRoot\system32\DRIVERS\pci.sys
  Loaded driver \SystemRoot\System32\drivers\partmgr.sys
  Loaded driver \SystemRoot\system32\DRIVERS\compbatt.sys
  Loaded driver \SystemRoot\system32\DRIVERS\BATTC. SYS
  Loaded driver \SystemRoot\system32\DRIVERS\volmgr.sys
  Loaded driver \SystemRoot\System32\drivers\volmgrx.sys
  Loaded driver \SystemRoot\System32\drivers\mountmgr.sys
  Loaded driver \SystemRoot\system32\DRIVERS\iaStor.sys
  Loaded driver \SystemRoot\system32\DRIVERS\iaNvStor.sys
  Loaded driver \SystemRoot\system32\DRIVERS\amdxata.sys
  Loaded driver \SystemRoot\system32\drivers\fltmgr.sys
  Loaded driver \SystemRoot\system32\drivers\fileinfo.sys
  Loaded driver \SystemRoot\System32\Drivers\Ntfs.sys
  Loaded driver \SystemRoot\System32\Drivers\msrpc.sys
  Loaded driver \SystemRoot\System32\Drivers\ksecdd.sys
  Loaded driver \SystemRoot\System32\Drivers\cng.sys
  Loaded driver \SystemRoot\System32\drivers\pcw.sys
  Loaded driver \SystemRoot\System32\DRIVERS\DozeHDD.sys
  Loaded driver \SystemRoot\System32\Drivers\Fs_Rec.sys
  Loaded driver \SystemRoot\system32\drivers\ndis.sys
  Loaded driver \SystemRoot\system32\drivers\NETIO. SYS
  Loaded driver \SystemRoot\System32\Drivers\ksecpkg.sys
  Loaded driver \SystemRoot\System32\drivers\tcpip.sys
  Loaded driver \SystemRoot\System32\drivers\fwpkclnt.sys
  Loaded driver \SystemRoot\system32\DRIVERS\vmstorfl.sys
  Loaded driver \SystemRoot\system32\DRIVERS\volsnap.sys
  Loaded driver \SystemRoot\System32\DRIVERS\ApsHM86.sys
  Loaded driver \SystemRoot\System32\Drivers\spldr.sys
  Loaded driver \SystemRoot\System32\drivers\rdyboost.sys
  Loaded driver \SystemRoot\System32\DRIVERS\Apsx86.sys
  Loaded driver \SystemRoot\System32\Drivers\mup.sys
  Loaded driver \SystemRoot\System32\drivers\hwpolicy.sys
  Loaded driver \SystemRoot\System32\DRIVERS\fvevol.sys
  Loaded driver \SystemRoot\system32\DRIVERS\disk.sys
  Loaded driver \SystemRoot\system32\DRIVERS\CLASSPNP. SYS
  Did not load driver \SystemRoot\system32\DRIVERS\cdrom.sys
  Loaded driver \SystemRoot\System32\DRIVERS\cmdguard.sys
  Loaded driver \SystemRoot\System32\Drivers\Null.SYS
  Loaded driver \SystemRoot\System32\Drivers\Beep.SYS
  Loaded driver \SystemRoot\System32\drivers\vga.sys
  Loaded driver \SystemRoot\System32\DRIVERS\RDPCDD.sys
  Loaded driver \SystemRoot\system32\drivers\rdpencdd.sys
  Loaded driver \SystemRoot\system32\drivers\rdprefmp.sys
  Loaded driver \SystemRoot\System32\Drivers\Msfs.SYS
  Loaded driver \SystemRoot\System32\Drivers\Npfs.SYS
  Loaded driver \SystemRoot\system32\DRIVERS\tdx.sys
  Loaded driver \SystemRoot\System32\DRIVERS\cmdhlp.sys
  Loaded driver \SystemRoot\system32\drivers\afd.sys
  Loaded driver \SystemRoot\System32\DRIVERS\netbt.sys
  Loaded driver \SystemRoot\system32\DRIVERS\wfplwf.sys
  Loaded driver \SystemRoot\system32\DRIVERS\pacer.sys
  Loaded driver \SystemRoot\system32\DRIVERS\vwififlt.sys
  Loaded driver \SystemRoot\system32\DRIVERS\inspect.sys
  Loaded driver \SystemRoot\system32\DRIVERS\netbios.sys
  Loaded driver \SystemRoot\system32\DRIVERS\serial.sys
  Loaded driver \SystemRoot\system32\DRIVERS\wanarp.sys
  Loaded driver \SystemRoot\System32\drivers\Tppwr32v.sys
  Loaded driver \SystemRoot\system32\DRIVERS\termdd.sys
  Loaded driver \SystemRoot\system32\DRIVERS\ssmdrv.sys
  Loaded driver \SystemRoot\system32\DRIVERS\rdbss.sys
  Loaded driver \SystemRoot\system32\drivers\nsiproxy.sys
  Loaded driver \SystemRoot\system32\DRIVERS\mssmbios.sys
  Loaded driver \SystemRoot\system32\DRIVERS\smiif32.sys
  Loaded driver \SystemRoot\System32\drivers\discache.sys
  Loaded driver \SystemRoot\system32\drivers\csc.sys
  Loaded driver \SystemRoot\System32\Drivers\dfsc.sys
  Loaded driver \SystemRoot\system32\DRIVERS\blbdrive.sys
  Loaded driver \SystemRoot\system32\DRIVERS\avipbb.sys
  Driver loaded? \C:\Program Files\Avira\AntiVir AntiVir Desktop avgio.sys
  Loaded driver \SystemRoot\system32\DRIVERS\tunnel.sys
  Loaded driver \SystemRoot\system32\DRIVERS\intelppm.sys
  Loaded driver \SystemRoot\System32\drivers\dxgkrnl.sys
  Loaded driver \SystemRoot\system32\DRIVERS\igdkmd32.sys
  Loaded driver \SystemRoot\system32\DRIVERS\HECI.sys
  Loaded driver \SystemRoot\system32\DRIVERS\serenum.sys
  Loaded driver \SystemRoot\system32\DRIVERS\e1y6032.sys
  Loaded driver \SystemRoot\system32\DRIVERS\usbuhci.sys
  Loaded driver \SystemRoot\system32\DRIVERS\usbehci.sys
  Loaded driver \SystemRoot\system32\DRIVERS\HDAudBus.sys
  Loaded driver \SystemRoot\system32\DRIVERS\NETwNs32.sys
  Loaded driver \SystemRoot\system32\DRIVERS\vwifibus.sys
  Loaded driver \SystemRoot\system32\DRIVERS\i8042prt.sys
  Loaded driver \SystemRoot\system32\DRIVERS\kbdclass.sys
  Loaded driver \SystemRoot\system32\DRIVERS\tp4track.sys
  Loaded driver \SystemRoot\system32\DRIVERS\mouclass.sys
  Loaded driver \SystemRoot\system32\drivers\tpm.sys
  Loaded driver \SystemRoot\system32\DRIVERS\CmBatt.sys
  Loaded driver \SystemRoot\system32\DRIVERS\ibmpmdrv.sys
  Loaded driver \SystemRoot\system32\DRIVERS\wmiacpi.sys
  Loaded driver \SystemRoot\system32\DRIVERS\CompositeBus.sys
  Loaded driver \SystemRoot\system32\DRIVERS\AgileVpn.sys
  Loaded driver \SystemRoot\system32\DRIVERS\rasl2tp.sys
  Loaded driver \SystemRoot\system32\DRIVERS\ndistapi.sys
  Loaded driver \SystemRoot\system32\DRIVERS\ndiswan.sys
  Loaded driver \SystemRoot\system32\DRIVERS\raspppoe.sys
  Loaded driver \SystemRoot\system32\DRIVERS\raspptp.sys
  Loaded driver \SystemRoot\system32\DRIVERS\rassstp.sys
  Loaded driver \SystemRoot\system32\DRIVERS\rdpbus.sys
  Loaded driver \SystemRoot\system32\DRIVERS\psadd.sys
  Loaded driver \SystemRoot\system32\DRIVERS\Tvti2c.sys
  Loaded driver \SystemRoot\system32\DRIVERS\swenum.sys
  Loaded driver \SystemRoot\system32\DRIVERS\umbus.sys
  Loaded driver \SystemRoot\system32\DRIVERS\bpenum.sys
  Loaded driver \SystemRoot\system32\DRIVERS\usbhub.sys
  Loaded driver \SystemRoot\System32\Drivers\NDProxy.SYS
  Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS
  Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS
  Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS
  Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS
  Loaded driver \SystemRoot\system32\drivers\CHDRT32.sys
  Loaded driver \SystemRoot\system32\DRIVERS\HSXHWAZL.sys
  Loaded driver \SystemRoot\system32\DRIVERS\HSX_DPV.sys
  Loaded driver \SystemRoot\system32\DRIVERS\HSX_CNXT.sys
  Loaded driver \SystemRoot\system32\drivers\modem.sys
  Loaded driver \SystemRoot\System32\Drivers\bpusb.sys
  Loaded driver \SystemRoot\system32\DRIVERS\bpmp.sys
  Loaded driver \SystemRoot\system32\DRIVERS\usbccgp.sys
  Loaded driver \SystemRoot\system32\DRIVERS\RCUVCMNP.sys
  Loaded driver \SystemRoot\system32\DRIVERS\monitor.sys
  Loaded driver \SystemRoot\System32\Drivers\ATSwpWDF.sys
  Loaded driver \SystemRoot\system32\DRIVERS\hidusb.sys
  Loaded driver \SystemRoot\system32\DRIVERS\LHidFilt.Sys
  Loaded driver \SystemRoot\system32\DRIVERS\mouhid.sys
  Loaded driver \SystemRoot\system32\DRIVERS\LMouFilt.Sys
  Loaded driver \SystemRoot\system32\drivers\luafv.sys
  Loaded driver \SystemRoot\system32\DRIVERS\avgntflt.sys
  Loaded driver \SystemRoot\system32\drivers\WudfPf.sys
  Loaded driver \SystemRoot\system32\DRIVERS\lltdio.sys
  Loaded driver \SystemRoot\system32\DRIVERS\nwifi.sys
  Loaded driver \SystemRoot\system32\DRIVERS\ndisuio.sys
  Loaded driver \SystemRoot\system32\DRIVERS\rspndr.sys
  Loaded driver \SystemRoot\system32\drivers\HTTP.sys
  Loaded driver \SystemRoot\system32\DRIVERS\bowser.sys
  Loaded driver \SystemRoot\System32\drivers\mpsdrv.sys
  Loaded driver \SystemRoot\system32\DRIVERS\mrxsmb.sys
  Loaded driver \SystemRoot\system32\DRIVERS\mrxsmb10.sys
  Loaded driver \SystemRoot\system32\DRIVERS\mrxsmb20.sys
  Did not load driver \SystemRoot\system32\DRIVERS\parport.sys
  Did not load driver \SystemRoot\SYSTEM32\DRIVERS\VirtualSerial.sys
  Loaded driver \SystemRoot\system32\DRIVERS\mdmxsdk.sys
  Loaded driver \SystemRoot\system32\drivers\peauth.sys
  Loaded driver \SystemRoot\System32\Drivers\secdrv. SYS
  Loaded driver \SystemRoot\System32\DRIVERS\srvnet.sys
  Loaded driver \SystemRoot\System32\drivers\tcpipreg.sys
  Loaded driver \SystemRoot\system32\DRIVERS\XAudio32.sys
  Loaded driver \SystemRoot\System32\DRIVERS\srv2.sys
  Loaded driver \SystemRoot\System32\DRIVERS\srv.sys
  Did not load driver \SystemRoot\system32\DRIVERS\avgntflt.sys
  Did not load driver \SystemRoot\System32\DRIVERS\srv.sys
  Loaded driver \SystemRoot\System32\Drivers\fastfat. SYS

  I would try a factory reset before anything at this stage of the probley

• Satelite A660 freezes at startup every time, but start in safe mode.

  The other day I was using my laptop normally when it froze. Nothing would work, so I stopped and have not been able to market normally since. It will start in safe mode but not in safe mode with network. If I try to boot normally it freezes right at the same time at the start of each time.

  I tried:
  -Select "repair your computer" when starting the
  -Restoration of the BIOS to the default settings
  -Disable start programs in safe mode
  -Restore the system to a previous date
  -Back to the last successful startup

  None of them work. It just freezes.

  I can't use the good conditions, not too computer savvy... I even tried to return the computer to factory settings, as recommended on the site of Toshiba, but when you press 0 a screen pops up that doesn't seem to have anything to do with the system restore?

  I am at a loss. Any help would be appreciated.

  Hello

  Everything you tried is right. It is not easy to say why you have this problem of gel, but I think that in this situation best solution is the installation of clean operating system (factory settings).
  In s user guides document explains how to do this. I put t know why don't you use 0 to start.
  Start with F8 laptop and use the option to fix my computer.

  How it works you can also read on follow Toshiba document-http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm

  Please test and comment pos.

• computer will only start in safe mode, always samekh in normal mode

  Original title: help

  computer will only start in safe mode, always samekh in normal mode.any ideas?

  Hello

  do this work in Mode safe mode with networking:

  Run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• XP will only start in safe mode after service pk 3 install, mdule Eventvwr say service command failed

  After a clean install of windows xp family, with nothing but Pctools virus installed and disabled, Xp will only start in safe mode, all 3 choices, it does not start in Msconfig service diagnosis either. Eventvwr said service control module has failed. I tried to uncheck that service figure, but he said that the computer will not start if it is disabled. I uninstalled 3 times and reinstalled with the same results. A last one being a service pk 3 that I downloaded and installed in safe mode.

  It has been installed and working before the clean install of windows with pk3. I removed the patration from the hard drive, write 000 to the dick and reformatted before clean install of xp. It will work with service pk 2 is installed.

  I checked the forums and he Goggled and could not find a solution

  any help will be appreciated

  E-mail address is removed from the privacy *.

  Boris

  You must install SP3 before you install your antivirus program. This can be done safely by downloading the file in advance and install while physically disconnected from the Internet. In addition, you should keep IE at the level before installing SP3 IE6.

  Link to the standalone SP3 Installer file:

  http://www.Microsoft.com/download/en/details.aspx?ID=24

• my vista operating system continues to run in a loop, saying: Configuring updates 3/3 0 full. Cannot start in safe mode or the other amounts to the same configuration problem

  System downloaded 2 of 3 updates. the third will not update and continues in a loop. Failed to start in SafeMode either. Don't know what to do.

  Hello

  as you cannot start in safe mode, try this

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  or repost in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Vista 64-bit Black Screen of Death, with just a mobile available slider, the system does not start in safe mode.

  My system worked properly on 25 April and then something happened and now the machine comes back with "Start menu options" but will not start in one of the listed options, modes result in the same outcome.  System also starts on the Vista CD.

  System begins to boot normally, shows the tracer Green Windows at the bottom of the screen, then the mouse pointer appears and moves but the rest of the screen remains black.

  That's it, that's all what he will do.  I checked the settings of the computer and ran the diagnostic tests available and everything seems to go fine and passes all the tests.

  I worked on my own computers for over 20 years and never been stumped before, but I must say this is a first, and I have no idea what to try to do it now.

  Help or direction is appreciated.

  original title: Vista 64-bit Black Screen of Death, with just a mobile available slider, the system does not start in safe mode.

  See if there is a way to tecover clean your data before doing a restore to conditions of factory that will wipe the drive of all.  You can use Knoppix http://www.knopper.net/knoppix/index-en.html with a good ISO as Copier: http://isorecorder.alexfeinman.com/isorecorder.htm as well as a blank CD (which you will need to do on another computer).  Starting on this disc and lla should give you enough access to the system (if you do not have any other means) to backup your important data.

  So since you seem to have no other alernatives, you can try retoring the original factory computer options. However, if it is a hardware problem as could very well be the case, you can still encounter problems after even this drastic step.  Then you will need to consider in a reputable computer repair shop (NOT Geek Squad or or a any of these big store centers) or maybe even go back to the manufacturer for repair.   Check out several options and compare the costs, quality and guaranteed and then make your best decision.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Something is wrong! Start in safe mode, but it turns out that for Normal mode.

  Mac Mini (late 2014)

  Processor 3 GHz Intel Core i7

  16GB 1600 MHz DDR3 memory

  Start drive Macintosh HD

  Iris 1536 MB Intel graphics card

  Monitor: DELL U2713HM, use the Apple adapter to connect to the Mac Mini

  I upgraded from Capitan in Sierra and got the problem that after I pressed the power button, the screen is full white. This problem has occurred on the Sierra, never happened in Capitan.

  I went to the Apple store today, they made a few diagnostic and found no problem. Everything is good. System is fine too. In the Apple store, they showed me to press SHIFT after I press the power button and it will start up the Mac in safe mode. They told me this can sometimes help fixing the boot issue. My Mac actually works very well in the Apple store. I tried the power and turned off twice in the store, and there is no problem. I am happy and come home.

  After I go home, I turn on my Mac, it always has the same problem before you go to the Apple store, after I pressed the power button, the screen is completely blank. So I tried to boot mode safe by pressing Shift and taking until I saw the Apple logo on the screen.

  After I log in, I checked my Mac mode, this is actually Normal mode!

  If I intended to power to the top of my Mac in safe mode but it turns out to be normal.

  If I do not press SHIFT and hold it pressed down after I turn on the power, I'll have just a white screen!

  It works very well in Apple store, but not in my own House.

  Anyone know what is happening?

  What is different between your system and the store? Have you taken your own keyboard & they were they that? If you use a bluetooth keyboard try using a wired USB one instead. Is this an original Apple keyboard?

  Do you have other devices connected? If you delete them.

  Please see the article below from Apple, it has information about starting in safe mode without keyboard (by setting a NVRAM variable). If you enter a work boot, you can put the mini in safe mode from there, via the command appears on this page...

  Try safe mode if your Mac does not end commissioning - Apple Support

  I would like to start trying to make another bootable OS disc - either an installation disc or a complete operating system to see if the Mac can be started OK to a different installation of OS - which indicates if the operating system or disk are part of your question, or if the material is simply unable to work correctly at all.

• HP dv6-6b51nr, will not start in safe mode. pls help

  Thanks for any help.

  I am trying to start my laptop in safe mode by pressing f8 at startup. but I got only a black screen then the laptop starts beeping, which will not stop until I force shut down the laptop.

  Seems something wrong. Help, please.

  Thank you.

  If you are still able to start a normal Windows there is a work around.

  In Windows, search programs and files box, type "msconfig".

  Select the Startup tab and choose start as in the image below. Now, restart the laptop and you should start in Windows safe mode.

  

  Don't forget to go back into msconfig later you will start up in the normal Windows installation again. If you forget to do this, it will always start in safe mode.

  You do not specify what operating system is installed in your laptop. The procedure is valid for Windows XP, Vista and Windows 7.

• Desktop Windows vista always starts in safe mode

  Why windows vista always starts in safe mode?

  Hello

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu, type in msconfig
  4. Then press enter on your keyboard.
  5. The System Configuration utility opens
  6. Make sure that Start Selection is set for Normal start.
  7. Click the Startup tab.
  8. Make sure you start is not checked
  9. Press the apply button and then press the OK button.
  10. Click the restart button to restart your computer.

  See you soon.

• Computer Vista starts in safe mode, it is impossible to remove malware

  'Vista' of computer starts in safe mode. AVG on and execution of 52 Trojan detections and system leave not Malbytes {sic} program remove them. I tried all of the obvious solutions. Also I can not save and restore any files there I MISS my XP!

  oxooccc0e

  Hello

  See the following message to use to restore access to Windows AFTER you'RE sure that the machine is
  Malware free.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.