my Windows Vista Ultimate stuck with 3 of 3, 0% complete and continuous updates still restart loop

Similar Questions

• Windows Vista crashes, I get the 'Blue screen of Death' and I have to restart. Different errors each time it crashes.

  Windows Vista crashes, I get the 'Blue screen of Death' and I have to restart. Different errors each time it crashes. I tried to reinstall vista without success of the problem being fixed

  Hello

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows Vista Ultimate Edition with HP Color LaserJet CM1015 MFP

  I'm running Windows Vista Ultimate, the computer was bought in 2008, 32-bit.  I also use HP Color LaserJet CM1015 MFP - about once a year, I have a major problem with the scan software & Windows Vista.  Both machines are in good working condition.  This time, I actually uninstalled the HP software and bought a new CD from HP specfically for Vista and installed the Vista software for the HP mfp - however, the scan option does not appear in the center of HP solutions as a button.  This is a feature I've always used.  What is the HP Solution Center is the scanner is not installed - although in the installed software.  Last night, I downloaded a patch and that did not correct the problem.  In addition, the HP LaserJet CM 1015 is in 'scanners and cameras' in the Panel configuration, but not in the HP Solution Center...

  Hello

  1. your printer work?

  Try to find the drivers scanner HP, if that does not work then I suggest you contact the hardware manufacturer.

• Windows Vista is stuck on the 3rd step of the step 3 update

  Original title: UPDATE STUCK IN LOOP CANT LAPTOP USE. HELP PLEASE.

  Windows vista is stuck on the 3rd stage of the update from step 3 and continuously restarts my laptop acer of nephews, we cannot not beyond this point to use the laptop. Any suggestions?

  Hi Jol1,

  You can try the troubleshooting provided in the link below steps to fix the problem.

  An update is not installed successfully when you try to install the update in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/949358

  Let us know if that helps.

• Get BSOD when updated in Windows Vista Ultimate Edition

  I got the Windows Update for Monday, 30/11/09. Under the option updated, I clicked on the update Realtek for my wireless 801.11 b / g driver.  During the download on the window updates screen, he says that he was downloading updates. Then he went to install the updates and I got the BSOD about 3/4 of the way through.  Reboot the computer and to the Welcome screen, it said it was set up the updates.  He crossed the 1st to the 3rd stage, but remained at 0% and then in Windows. When the desktop is loaded, the window "Windows has recovered from an unexpected shutdown" came.  When I click on "Find solutions", he went the BSOD and restarted all over again with the same message "install updates" at the Welcome screen.  When I tried to cancel the window "windows has recovered...". ', he went the BSOD again and restarted again with the same method. The next time I tried to restart the computer and during the stop, he went to the BSOD and restarted everything again. This also happens when I try to shut down the computer.  The stop on the BSOD error message is Stop: 0x0000001A. Windows error that appears under Windows is 80070103.  I am running Windows Vista Ultimate Edition.  Help, please. How can I get out of this loop.  I tried the "Fix - It" program, but it's the same thing when he went to restart the computer. I know it has something to do with the appearance of the Windows Update, but I do not know how to break the loop of update.

  Bob,
  Run the Microsoft Fix - It from this link:reset Windows Update components

  It has all the steps that you have already done, but includes a couple that you don't.  After you run reboot and post back with the results.  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• For Vista Ultimate system with no disk restore

  I try to wipe my computer and back to the original without the disk system restore settings.  This computer was originally shipped with windows XP, but I installed Windows Vista Ultimate Edition.  I bought a new computer and have already transferred all my files, I just need to clean it now before I give it.

  I tried a few measures based on advice that does not take place.  I tried hitting F8 on startup, told me to highlight the "Repair computer" option, but there is no option.

  What should I do to take this for a Vista Ultimate perfectly clean, or at least back to the factory settings?

  Thanks for your help!

  Hello

  1 did you receive an error message?

  2. you have windows vista DVD disc?

  I suggest you to follow the steps from the links and check out.

  Installation and reinstallation of Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista

  Converting a hard disk partition or volume from NTFS to FAT32 requires that you reformat the partition, which deletes all the data on this subject. Be sure to back up data that you want to keep before you begin.

• How can I get my Windows Vista Ultimate product key so that I can install it on my new computer?

  I have a windows vista Ultimate edition with service pack, one on a promotional drive and I need to install it on another computer because the other comes to break. I need to know who to ask the original of the licence Key?

  original title: Windows Vista Ultimate.

  Hello

  I'm sorry, but we cannot help you here

  We don't know anything about a promotion

  I suggest you contact whenever you got the license/record of this special promotion

• Window Vista Ultimate 2007 backup files empty on the external drive.

  The computer is a desktop HP running Windows Vista Ultimate 2007, 32 Bit OS, RAM 400 GB and Intel Quad CPU 2 .4GHz.

  I ran Windows Vista backup for a full backup and a backup of the file.  When I look at the external disk to verify the backup files are empty.  There are two created on the external hard drive, but both files are empty.  The program indicates that the backup routine successfully on the external drive. I have not received any error message.

  I use a Toshiba external drive with 500 + GB.  I have a lot of room.  I tried twice.  The first time I reformatted the external drive using Windows and revived the full backup only.  Once again the image file on the external drive shows 0 bytes, 0 files.

  I wonder why the backup files are not getting moved on the external drive.

  Hi BEM Consult,.

  1. are you allowing Windows to choose recommended backup or you choose "Let me pick" option on the backup configuration window?

  We recommend that you connect the external hard drive on another computer and check if the size of the backup file is in the list.

  Check if you have selected all the items in the backup settings to create a backup file. Try to create a new backup file by selecting all items on the Backup Wizard and check the result.

  See set or change automatic backup settings

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista Ultimate Edition will not be upgraded to Windows 7

  Windows 7 Upgrade says he cannot directly upgrade Windows XP, duh?  I ran the Upgrade Advisor before running the upgrade software and did not get this stupid message. I get only when the software upgrade performs its checks.  I am running Windows Vista Ultimate Edition with all updates to September 24, 2013.

  Which edition of Windows 7? It matches the edition of Vista you are trying to upgrade to?

  When important changes to your computer, for example an upgrade, it is always recommended that you back up your system before installing a new version of Windows. In your case, you can upgrade to Windows 7 depending on the edition and the architecture of Windows Vista, you have installed. If you are running a 32-bit version of Vista and upgrade to a 64-bit (Windows 7 edition) version, you'll have a pure make install, it is the opposite case.

  If you are using Windows Vista Home Basic or Premium consumer editions, you can only upgrade to Windows 7 Home Premium or Ultimate. In addition, you can make downgrades, which means, if you are running Windows Vista Ultimate Edition now, you cannot downgrade to Windows 7 Home Premium. You perform logical upgrades:

  Windows Vista Home Basic > Windows 7 Home Basic, Premium or Ultimate

  Windows Vista Edition Home Premium > Windows 7 Home Premium or Ultimate

  Windows Vista Business > Windows 7 Professional, enterprise or ultimate edition

  Windows Vista Business > Windows 7 Enterprise

  Windows Vista Ultimate > Windows 7 Ultimate.

  http://www.notebooks.com/2009/10/07/how-to-upgrade-to-Windows-7/

• Need to update Windows Vista Ultimate Edition of Windows Vista Service Pack 2

  Original title: I SPILLED chocolate milk ON MY WINDOWS VISTA COMPUTER!

  Yesterday, I spilled milk on my Windows Vista Ultimate 32-bit computer!

  It has no service pack and I need to upgrade to Windows Vista Ultimate SP2!

  My dad installed Java and it was better and dry

  but thre are a few programs on my vista computer

  The Manufaucter computer is Dell

  And Dell Inspiron 531!

  I still have no service pack, but I looked at Windows Update and installed Windows Ultimate Extras

  See U in Windows,

  Numbuh3wearsabutterflycoutume

• I have been informed if you have Vista Home Premium windows will give you windows 7 ultimate for free. Is this true? And who should I contact to go forward with this place.

  I have been informed if you have Vista Home Premium windows will give you windows 7 ultimate for free. Is this true? And who should I contact to go forward with this place.

  Please see the bulletin: Windows 7 Upgrade Option Carey Frisch

• How can I restore my empowering technology from acer asire Home premium back to factory with a recovery disk? All the factory settings have been destroyed, and windows vista ultimate sp1 has been installed on my computer.

  I have an acer aspire 4720z / with windows vista home premium / with the enabling technology / processor intel pentium dual core. I think I downloaded a program limewire lennex, it was suppose to be something else. Somehow that he closed my computor, luckly my cuzin was able to download windows vista ultimate SP1 64 2007 multimedia content on my laptop so that I can at least use MY COMP. But I think I like the version that is installed on my comp.better to the ultimate version on my comp.now, it does not seem as before prefome. Some things on my computer laptop don't prop wk. What should I do, go back to my version Home premium of moose? If so how to do that? I don't have a home premium recovery disc. I tried to install the updates of windows SP2 64 thought repairs that would set back 2 the origonal but settings it na not or at least update the ultimate version do you think I should do.

  If you have downloaded Vista Ultimate and not bought, you use pirate software.

  You will receive NO Support for pirated software.

  If this does not work, contact Acer:

  http://www.acerpanam.com/Synapse/forms/portal20.cfm?RecordID=853&formid=3390&website=AcerPanAm.com&siteid=7117&words=all&keywords=&areaid=2

  Acer eRecovery made

   

  1. on the Acer splash screen, you can press Alt and F10 (at the same time press F2 to enter the BIOS) to make it appear a version BACK style eRecovery.

  ·        The unit is able to reload Windows from this mode faster then CD.

  ·        The default password is 000000 (6 zeros) and it is shown when you are prompted for the password.

  ·        Users are able to change the password in this mode for eRecovery only.

  ·        The system can retrieve the hidden on the hard disk (partition PQService) image or a CD/DVD media.

  ·        It is possible to reload the factory CD/DVD style or snapshots that creates the eRecovery Windows version.

  2. in Windows, there are 3 ways to access eRecovery functionality.

  ·        Press Alt and F10

  ·        Open Acer eManager and then double-click eRecovery.

  ·        When a system is new it should automatically open this application and invite you to do the recovery media.

  3. the Windows version of the eRecovery program is stronger then the Dos Version. Below you will find the various features of the Windows version:

  Recovery settings: create backup files and change password

  ·        Picture of the backup snapshot (create a disk image of your system configuration)

  1. the system is able to make a CD/DVD image of the current state of mobile software including customer programs installed.

  2. This CD/DVD is usable in Windows and DOS of the program version.

  3. the drive should start, but isn't always.

  4 when a snapshot is in fact the image is on the D: partition and then can be burned to disc if eRecovery is said to.

  ·        Burn the Image to disc (create a backup disk)

  1. you can create 3-7 CD or DVD 1-2 such as those that were sent with the units before eRecovery.

  2. the serious CD are equal in usage to the system recovery CD and CD

  ·        Remove data from backup image of capture instant user (if available)

  1. This is how delete you the snapshot on the D: partition images

  ·        Password: (change the eRecovery password)

  1. measures: restore your system using an existing backup file or restore the default configuration in your system factory.

  2 backup copy using one of the snapshots has been filed or the original image on the D: partition.

  4. made eRecovery

  ·        When the hard drive is replaced the system loses its characteristics eRecovery. These features are on the hard drive and cannot be reinstalled.

  ·        When reinstalling from the CD/DVD's you will lose the eRecovery program but the DOS version can still function, as if uninstalled, you can not reinstall.

  ·        eRecovery uses Ghost (as well as the use of our recovery CD) to create snapshot images.

  ·        If the PQService partition is removed using fdisk or a utility under Windows, you may need to reinstall Windows.

  ·        If the system is recharged using the DOS version you retain the eRecovery feature

  Mick Murphy - Microsoft partner

• Can I use "Vista Home Premium Product Key' with 'Windows Vista Ultimate'?

  Hi guys,.
  Please...
  Can I use my "Vista Home Premium Product Key' with 'Windows Vista Ultimate'?

  Hello

  NO.

  You cannot use your Vista Home Premium product key with Vista Ultimate

  You must purchase a license/product key for Ultimate

  and microsoft sells more vista

  they switched to windows 7

• How to create a recovery partition bootable to windows vista ultimate with all installed programs, updates and all the configuration as the factory recovery disc?

  Hello world!!

  I formatted my HP laptop, then I installed Windows Vista Ultimate, I used before Windows Vista Home Edition, but when I made this new installation I lost all programs and the configuration that I have before, so I installed all once again, but I don't have a recovery for this partition... so I would like to have one... in the case of making a mistake or some accident my system virus or something that my system fail totally I recover my system, in this case completely without installing all windows and programs and updates... Well, you know take in many times to do it one by one... it would be nice if someone can help me with this, please explain the details, I'm no expert on this, but I would like to know... Tank you.

  • Response
  • Quote
  Type in the start - Help and Support
   
  PC Backup
   
  Choose the topics
   
  Back up your programs, files and system settings
  Restore your computer from a system image backup
  --
  ..
  --
  "eaglewarior" wrote in message news: af8c8e21-4-dec-4e67-9700-826358e2d489...
  >
  > Hi everyone!
  >
  > I formatted my HP laptop, then I installed Windows Vista Ultimate, I used
  > I have Windows Vista Home Edition, but when I made this new facility
  > lost all programs and the configuration that I have before, so I installed all
  > once again, but I don't have a recovery for this partition... so, I would
  > like to have one... in case of make a mistake or some accident of virus my
  > system or something that my system completely fail I will recover completely
  > my system, in this case without installing all programs and windows and
  > updates... Well, you know take many time to make this one... so
  > would be nice if someone can help me with this, please explain the details
  > I'm no expert on this but I would like to know... Tank you.
  >
  > a.. Replyb... Quote
  >
   
   

• Error code 646 with windows vista Ultimate edition (KB973593) (KB973704) (KB975960) (KB974561)

  Hello, windows on my computer trying to install the latest updates but I get the error code 646 and FAILURE
  I use windows vista ultimate.

  Update of security for Microsoft Office Excel 2007 (KB973593)

  Update of security for Microsoft Office 2007 System (KB973704)

  Update for the junk e-mail in Outlook 2007 (KB975960) filter

  Update for Microsoft Office Word 2007 (KB974561)

  Try to manually download the Office updates and install:
  For example: http://www.microsoft.com/downloads/en/results.aspx?freetext=KB973593&displaylang=en&stype=s_basic

  You can search each and every one of them on the link above by entering the number I did in the example.

  TaurArian [MVP] 2005-2010 - Update Services