my windows xp backup assestent seams not included

Similar Questions

• Windows Live Mail 2011 will NOT include message in his response, when well same "Include message in reply" IS checked!

  Windows Live Mail 2011 will NOT include message in his response, when well same "Include message in reply" IS checked!  Why?

  I use OUtlook email, Outlook Express, and Ow live for years... I know what to try to refine and set up by e-mail according to the user... But it baffles me... Please help!

  Hello

  Unfortunately the answers is a site of support of peers supported and has no real influence
  with Windows Live.

  Check with Windows Live Support and Forums

  Windows Live Mail Forums
  http://www.windowslivehelp.com/forums.aspx?ProductID=15

  Windows Live Solutions
  http://www.windowslivehelp.com/solutions.aspx?ProductID=15

  Windows Live Solution Center
  http://www.windowslivehelp.com/

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Windows 7 backup and restore not recognizing external hard drives

  My laptop recognizes the drives external hard and other storage devices and I can read and manually copy files, etc for them. But the backup and restore told me that nothing is connected when I try to run it. Also, when I connect the external hard drive to a USB port, the menu that is displayed does not include the option of backup of the device just connect. Is there a setting I need to change in the backup and restore program? Or is there another solution that everyone is aware of it please?

  Hi Sally,

  Thanks for posting your query in Microsoft Community.

  I understand that the backup and restore does not recognize the external hard drive, but Windows doesn't. I'll be happy to help you with your query. Let me ask you;

  1. Is - this happy with all external hard drives or individual?
  2. What kind of backup are trying to create, auto or manual?
  3. You did it recently no specific changes in the computer?

  There may be several reasons why backup & restore does not recognize the external hard drive. Let's check out the steps below.

  Step 1: Connect the device to a USB (Universal Serial Bus) and a different test.

  Step 2: You can check if the services responsible for the backup of restoration & work or not.

  Volume Shadow Copy and backup of Windows service.

  To check the services, you can follow the procedure.

  (a) click Start.

  (b) in the Search tab, type Services.msc , and then press Efriendship.

  (c) now in the services window, locate Windows Backup service and Volume Shadow Copy services. Check if they are started.

  Note: Check the services separately, and then close the Services window.

  Step 3: Run the next Fixit and check if the disc is recognized.

  Click here to launch the Fixit.

  Step 4: You can try to temporarily disable the security software of the computer and check with the question. Later, re-enable the security software.

  See: , disable the anti-virus software

  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Windows 7 backup function does not recognize the external drive connected to the wireless router

  I installed a Belkin router for my laptop and pc, it came with a usb port so that I can connect my external hard drive directly and share it as a backup drive.  But when I tried to set up in Windows 7, the backup options list.  The network recognizes it, but Windows will not let me select it as backup destination.  A buddy of mine said that the backup of Windows 7 does not work with network drives, but no matter who else thought of it?  Thnx.

  It depends on the flavor of Windows 7. The Home Premium version will not network disks, backup but the Ultimate version. You can connect your drive as a USB drive when you make your backup.
  _________________________
  ID #0316. If this answer was helpful, you can vote by clicking on the green triangle. If it solves the problem, click 'propose as answer. Thank you.

• Windows XP Pro SP3 does not include 1 TB WD internal SATA drive Green even if it is marked in the Device Manager doesn't work properly

  Using motherboard Asus P5N - D, the Sata drive is displayed in the bios.  I use a Maxtor IDE drive as primary and I just wanted to add more disk space.

  Hello

  Try to connect the external hard drive on another computer and check if the same problem persists.

  I suggest that you set the drive letter for the external hard drive and check if that helps.

  To assign a drive letter to a drive, a partition, or a volume, follow these steps:

  1. Sign in as an administrator or as a member of the Administrators group.
  2. Click Start, click Control Panel, and then click performance and Maintenance.

     Note If you do not see the performance and Maintenance, go to step 3. Performance and Maintenance appears in control Panel only if you use category view. If you are using the classic view, performance and Maintenance does not appear.

  3. Click Administrative Tools, double-click computer management, and then click disk management in the left pane.
  4. Right click on the drive, the partition, the logical drive or volume that you want to assign a drive letter to and then click change drive letter and paths.
  5. Click on Add.
  6. Click assign the following drive letter if it is not already selected, and then accept the default drive letter or click the drive letter that you want to use.
  7. Click OK.

  For more information:

  How to change drive letter assignments in Windows XP

  http://support.Microsoft.com/kb/307844

• Windows XP Movie Maker does not include the creation of a DVD. Are there updates or service packs to get that option?

  I was trying to help my friend with Movie Maker.  She has XP.  His Movie Maker is not an option "write to DVD.

  Movie Maker on my XP system doesn't have this option, but I bought a system of special media.

  Is it possible that it can upgrade its Movie Maker to be able to make the DVD.  Preference for free, of course.

  The only version of XP Movie Maker with the DVD
  the option is one you have: support for Windows XP
  Center Edition 2005

  Your friend must DVD Authoring software.

  To start... the following freeware can be useful to
  a test: The Movie Maker project must be registered
  in the. WMV or. AVI video format and then imported
  in the Authoring software. (I will paste information on the savings
  at the end of this message)

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.dvdflick.NET/Download.php
  (the download is: "dvdflick_setup_1.3.0.7.exe")

  Save the file to a folder on your hard drive and
  install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Info on economies in XP Movie Maker 2.1

  To save in a .wmv movie file...
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  ICT... "Best quality for my computer.
  Next /.
  Wait while the movie is saved.
  Finishing...

  To save a DV - AVI movie file...
  (and other options)
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  Show more choices.
  Other parameters.
  Open the window of the droplet and choose... DV - AVI.
  Next /.
  Wait while the movie is saved.
  Finishing...

• Windows Media Center 8.1 not included?

  So, what's the big idea? I bought a new computer laptop, totally loaded to connect my much more powerful PC to my Xbox 360 and to my extreme disappointment, I need now to pay $99 to do anything with a computer "upgraded" that I could do with no extra cost with my old computer.  Is there a sort to get around this?

  Tuesday, December 2, 2014 01:11:46 + 0000, Nate Vaughn wrote:
   
  > Is there some kind of work around this?
   
  If you want to watch and record TV, unless the seller of tuner provided
  software to do that, no, there's no workaround solutions. But it looks like you want
  use your Xbox as a Media Center Extender, so to WMC. So in the end, if
  you want WMC, you pay for the feature pack.
   
  Do not shoot the Messenger.
   
   
   
  __________________________________________________________________________________________________
  Barb
  MVP Windows Entertainment and connected home
  My Blog - http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   

• Windows 7 backup failed, saying: not enough space still there clearly is... What is happening?

  See the screen shot in the link...... it's weird... the backup is valid it is one he has already made and still there is enough space to hold the backup then what happens?

  http://img128.imageshack.us/img128/7779/backupspace.PNG

  Hello sirius.

  Check out this technet article.

  http://social.technet.Microsoft.com/forums/en-us/itprovistasetup/thread/18c33a73-5719-499a-866C-af124c05e671/

  Let me know if it works

  all the best

  Kind regards
  ADDISON

• Windows 7 backup won't launch

  The Windows 7 backup program will not control panel launch.  Nothing happens when I click on the launch icon.

  Strange, I just installed then uninstalled Acronis 2011 and had no problems.

  J W Stuart: http://www.pagestart.com

• Windows 7 backup and restore recording is not recent files (and task corrupted images)

  I recently discovered that my Windows 7 backup and restore does not work properly and need help to fix it.  The backup runs daily, but it seems that he spared not the files that have been generated in the last month or so.  For example, I was not able to restore files that have been created last week, even if they have been backed up yesterday.

  Any questions/comments that might relate to the question above:

  -J' had to upgrade to Windows 10 for 1 month and then downgraded to Windows 7, about a month earlier due to some software doesn't work only with Windows 10.
  -Last week, I realized that my automatic backup didn't work automatically.  I found the problem is due to a corrupt image of task in Task Scheduler I could fix.  I have developed from my backup with the recommended settings settings, and I discovered that the problem of missing file today.

  -J' still have a problem with the images of task corrupted because when I open the Task Scheduler, I get about 70 errors which "XXXX task: the task image is damaged or has been tampered with."  Any help

  Help for backup and the Task Scheduler issues would be greatly appreciated.  Thank you!!

  André

  Hello

  Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

  This could be due to corruption on the system files, please follow the methods below.

  Step 1: I suggest you to re-create the Task Scheduler.

  Steps to re-create the Task Scheduler

  1. Click Start; in the start search type regedit.exe and press ENTER. (If you get a consent prompt, click Yes).
  2. Navigate to the following location. HKLM\Software\Microsoft\Windows NT\Current Version\Schedule keys and remove its subkeys.
  3. Save the changes and then close the registry editor.

  Now check if the Task Scheduler works.

  Note: The steps mentioned below includes the modification of the system registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  Step 2: Perform the scan SFC

  I suggest that you can exercise SFC scan and check if that helps. The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. It is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  See the link: use the File Checker system to repair missing or corrupted system files

  Please answer us with this information and the current state of your computer, we will be happy to help you further.

  _______________

  Thank you best regards &,.

  Isha Soni

• Windows 7 backup error 0X8100002F: backup of ignored files (expected) does not allow the (unexpected) full

  Hi all:

  I am backing up my PC to a network folder.
  Everything works as expected when the backup - but it FAILS.
  I get the 0X8100002F error - and when I look in detail, it is said that \\ML370-FS1\Music has been saved not because it is not a local drive.
  It's 100% expected - this folder is in my music library.
  This should not cause an ERROR during the backup (as the docs stated clearly that remote files will not be saved).
  It must be a successful backup.
  Instead - I find myself with a message of daily failure without good reason.
  How can I stop Windows 7 backup to report this as an ERROR when the location ignored completely should be excluded from the backup.
  As now - my "Last backup" date is never - as this process always fails.
  Thank you
  Chris

  Hi Chris,

  Method 1:

  I suggest you take ownership of the drive that you want to backup to. Try it below the steps to do the same thing:

  a. right-click on the drive.

  b. click Properties , click the Security tab

  c. under the Security tab click the box that involves change

  d. put a box on all the boxes which is under the allow column.

  e. click apply and Ok.

  Method 2:

  You can temporarily disable firewalls and verify if the backup is complete. Check out the following link to do the same thing:

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3:

  Exclude files from backup files in the backup settings and then include these files in their original location. To exclude folders in other communities and to include these files in the original location, follow these steps:

  a. in the Control Panel, open the backup and restore.

  b. in the backup section, click change settings.

  (c) in the dialog box Configure the backup , click Next.

  d. in the dialog box that you want to save , click Let me chooseand then click Next.

  e. expand the data files, library, expand additional locations, and then click to clear the check boxes folder AppData, Contactsand Research .

  f. expand computers, expand the element of your system drive (for example, expand Local disk (c)), expand users, , and then click to select the checkboxes AppData, Contactsand Research if they exist.

  g. click Nextand then click on Save settings and exit.

  h. in backup and restore, click back up now to perform a new backup. The backup operation should complete without error.

  I hope this helps.

• Windows 7 backup skipped image system because one of the critical-volumes backup cannot be included for backup. Make sure the volume is online and is formatted NTFS. (0 x 81000032)

  After using the backup of Windows 7, I get the following error message:

  Backup Windows jumped backup system image because one of the critical volumes cannot be included for backup. Make sure the volume is online and is formatted NTFS. (0 x 81000032)

  The backup is set to include an image of disk system: RECOVERY, DRIVE (d), OS (c :))

  "RECOVERY, DRIVE (d :))" in car is a partition of 2 GB of the hard drive internal, such as configured by Dell, and it is formatted in FAT32.  I tried to reformat the NTFS volume, but were unsuccessful.  I also looked at a certain way to omit this volume, but have still been in vain.

  Can anyone help?

  Thank you.

  Do not assign a drive letter to the partition recovery/player. Open "Disk Management" and decommissioning (without drive letter) and backup and restore performance.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Windows Media Player does not include the CD Label/Insert manufacturer as it did before as I have re-installed Windows.

  original title: WHERE CAN I FIND WINDOWS XP MEDIA CENTER EDITION 2005 CD LABEL MAKER DONWLOAD?

  I HAVE A WINDOWS MEDIA PLAYER INSTALLED ON MY COMPUTER, BUT DOES NOT INCLUDE THE CD LABEL/INSERT MAKER THAT HAD MY ORIGINAL COMPUTER UNTIL I REPLACED MY HARD DRIVE. THE NEW WINDOWS THAT HAS BEEN INSTALLED IN MY NEW HARD DRIVE DID NOT INCLUDE THE LABEL MAKER FEATURE.

  Hi TerryodO'Donnell.

  The manufacturer of your computer would have installed extra software on your computer to create CD labels.

  So, you can use LightScribe system software to create CD labels.

  For more information, see:

  Forget the Sharpie: create your own disc labels

  Note: The information given in the link applies to Windows XP as well.

  Important: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

• My window XP THAT does not include Chinese character, how could I download Chinese characters.

  My window XP THAT does not include Chinese character, how could I download Chinese characters.

  Try reading this.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/int_pr_install_languages.mspx?mfr=true please rate me upward if you find my post helpful. Thank you!

• Computer backup button does not appear in the "backup and Restore Center window.

  Hello!

  I've seen some computers that are running Windows Vista Edition home premium 32 y 64 Bits I can't do a "computer backup" in case I have to restore the computer from an Image made by this process because the "Computer backup" button is not in the "backup and Restore Center window.

  As you can see in this link:
  http://www.Microsoft.com/Windows/Windows-Vista/features/backup.aspx

  You can see 4 buttons, I only see 2:
  -Backup files
  -Restore files

  Y at - it an update that makes these buttons appears in "Backup and Restore Center Window" or is the Version of Windows or of what it is. I find no answer yet.

  Thanks for any help!
  abasilis

  N °

  You have the right version of Vista and there is NO update to change, but you can BUY a Vista Upgrade operating system...

  http://www.Microsoft.com/Windows/Windows-Vista/get/Anytime-Upgrade-overview.aspx

  Upgrade Home Prenium to ultimate.

  http://www.Microsoft.com/Windows/Windows-Vista/features/backup.aspx

  Explore the features: Windows backup center and restoration

  If you read this link, that it is said that you can NOT make a backup of the computer in Vista Home versions.

  You need 3rd Party software to do this:

  http://www.Acronis.com.au/homecomputing/products/TrueImage/

  See you soon. Mick Murphy - Microsoft partner