Pavilion dv6000: black screen after getting a virus and reboot

Similar Questions

• Black screen after getting the flashing message

  I have a Pavilion dv6 3011so. During the execution of a program the computer gets a black screen with a message that says that the touchpad, keyboard will be no function during the flash process. Please do not feed the system until the flash compalete.

  But the process took a long time and I have power which crashed the computer. Now I can not start. I get a black screen and not any other sign of the PC.

  I think that you tried to update the BIOS, please read this article to solve this problem

  http://support.HP.com/us-en/document/c02693833

• Pavilion dm4-black screen after opening the cover of the fashion watch

  Pavilion dm4-3000tx

  Windows 7 (64-bit)

  When I close the lid of the laptop and re - open the screen remains black. the sounds keep playing and if a video is palyed before closing the lid, he also plays with the play/pause button, but there is no graphics on the screen, only a black screen while all runs in the background. I have to restart the machine with the power button then.

  action dafault on the cover is the sleep and re - open the cover and press a button he wakes up, but the screen is still black. problem when I change the dafault action: do nothing

  Hi zineb. I understand that your computer is well problems wake up sleep mode. I found a thread from Microsoft that contains a good amount of troubleshooting for this issue: http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/blankblack-screen-on-wake-up-from-sleep/6fdca378-6279-486e-8e7f-6e90a3f9d42f

  Please inform me of your results when the diagnosis is complete. I'm only here to help!

  Mario

• Black screen after TV jump back and no tuners after S3 Sleep

  Original title: MCE pesky bugs since the automatic update.

  1. get black screen and no sound when to jump back TV is called three times when viewing digital TV in real time. Very consistent bug. TV files saved in back jump bug does not watch it. Bug began after the last automatic update a few weeks ago MCE. Timeline always moves OK. Must go out MCE and restart to get the picture back. Bug doesnotoccur when you watch TV or analog signals.

  2 MCE reports occasionally have to find TV tuners again after waking from S3. Sometimes, that even after the hot start. But no hardware or software have evolved. No need to rescan the channels. MCE is invariably tuners (10 seconds), and then continues normally. All the latest drivers and updates have been installed. I think that this problem started after recent update MCE.

  My system: Win7 x 86 homepage. Intel i3 550 CPU, 2 GB of RAM, 7164 PCIe TV, card > 1 TB disk space. The DTV Australia.

  > Thanks - I've spent this long.
  Thanks Barb.
  I want to change my statement from the time of the MS update that broke the timeshift in MCE. I wrote "a few weeks" in my announcement on December 13. Then, I wrote "July" on 14 December. My partner is in agreement with my first memory and it is certain that he was not July, but a more recent problem is to say, late September or October. Sorry that I can not check the date from logs due made a clean installation in November.
  With age comes wisdom and humility so I have learned to accept the very important people with elegance... and always remember.  :-)
  Popybear.

• Laptop HP Pavilion g7 - black screen after login

  Hello, last night, I tried to understand why my Trend Micro antivirus was not updated itself, as I walked through Trend Micro troubleshooting options. I did a scan of firewall and restarted my computer later. When I restarted the computer, the adapter is out and shut down the computer while it was restarted. When I plugged it back in and press the power button, it took me for my normal login page. I signed up and the screen was black. I tried to push the windows, ESC, f1/f2 button and manually shut down the computer when no one who worked. I have tried several times and it is always black. The only thing that works is when I press ctrl, alt, del. I see my task manager, but nothing else. My CPU and disk % will be all over the map! with memory, never change the network never change to 0% and 14%. Is there something I can do?

  It's a laptop HP Pavilion g7
  I have Windows 8

  Help me Support HP team, you're my only hope!

  Hello

  Were there any other restore points listed for a date earlier than that you just tried?  If so, you might want to try the procedure again, ideally (if available) pick a restore point that is approximately 3 weeks.

  Kind regards

  DP - K

• Black screen after the mode 'sleep'

  My laptop never wakes fashion "Eve" and just keep with the dreaded black screen.

  If anyone has had this problem or have solutions?

  I am currently using a hardware, operating system.

  This message can help,

  http://h30434.www3.HP.com/T5/notebook-lockups-freezes-hangs/Pavilion-DV6-black-screen-after-sleep-mode/TD-p/527033

• Pavilion 15-243cl after automatic update of windows 8.1 I get a black screen after the home page.

  recently installed an automatic update of windows 8.1. Now, I get a black screen after the home page. I can load the Task Manager and access the internet. tried to go to the SafeMode to start with f8, but several attempts failed. I updated my graphics driver from AMD today and same black screen. I've also restored sytem to an earlier date using the HP utility with results screen - black even after the home page.

  Hello

  Try the following.

  Boot the computer normally and log.

  Black screen, old the ctrl and alt keys and press delete.

  Select Task Manager.

  Click on file and select the new task.

  Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

  When the system restore interface is loaded, choose a restore point at least 48 hours before the opening of session question (IE before the last batch of Windows updates have been applied) occurred initially and then proceed to the system restore.

  Kind regards

  DP - K

• Pavilion 15 - p065tx: Pavilion 15 - p065tx, black screen after BIOS update recommended by HP assistant

  System reboot with black screen after accepting the update of the BIOS recommended by HP assistant this morning. AC power on at least three hours of waiting after the process completed successfully with auto update reboots always.

  Power light is on. Wired broadband light is turned on. Light CAP LOCK keyboard and led speaker hold noway.

  Hard reset has been tried 3 times with no improvement.

  External monitor is connected but no signal has been out of the laptop, screen is black.

  Done a few times this page to reset the BIOS setting blindly:

  http://support.HP.com/us-en/document/c02217843

  BEEPS heard when you press F10 or F5 during procedures. But still black screen.

  What can I try again?  Please advice kindly!

  Hi @ sokw,

  I have read and reviewed the post. Thanks for your reply. It seems that bios is damaged, and that is why the computer does not start. As it cannot be fixed by any software troubleshooting, you will need to contact the HP support by phone for the machine.

  HP technical support are available by clicking on the following link:
  
  http://h22207.www2.HP.com/us-en/?openCLC=true
  
  (1) once the page opens, please select the country in which you are located. Then enter your model of HP on the right number.
  
  (2) then choose "Contact the Support" tab at the top and scroll to the bottom of the page "HP Support - contact" to fill out the form with your details.
  
  (3) Once finished, click the "Show Options" at the bottom right.
  
  (4) Finally, scroll to the bottom of the page and select "Get a phone number." A file number and telephone number will now fill for you.

  I hope this helps. I would like to know how this happens. I really hope that the problem is solved without hassle and the unit works very well. Believe me, I've done everything I can to help by keeping your interests in mind. Please reach out for questions and I'll be there for you help.

  Just to say thank youPlease click the ' Thumbs Up 'button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Now carefully and have a wonderful week ahead.

• HP Pavilion dv6: black screen with cursor after the connection

  For two weeks, my laptop lost sound through the speakers and plug headphones.  The computer recognizes there is a problem of devices not be enabled on troubleshooting menus, but when I check the devices individually and test says they are on and sound screens played... even if there is none.

  Due to this recurring problem, I downloaded the drivers for my system updated and uninstalled the old series and restarted my system.  Since then, I get a black screen after login and could make even spybot search and destroy scan my items, but that's all.  Computer still starts in safe mode and can run the Task Manager... Help?

  Hello

  Boot the computer normally and log.

  Black screen, hold down the ctrl and alt keys and press delete.

  Select Task Manager.

  Select the process tab and select to show processes from all users (lower-left).

  Click the column heading to organize the processes in alphabetical order.

  Look for an entry called to run once Wrapper (RunOnce.exe) - If you see it listed, right-click on it and select end task.

  If your office now appears, download AdwCleaner on the following link (there are 4-5 second delay until it's available)- Save in your downloads folder.

  https://toolslib.NET/downloads/finish/1/

  A once downloaded, close all programs, open your download folder and double-click the application to run it (click Yes to any uac prompt).

  Click the scan button.

  When the results are displayed, click the Clean button - when you are prompted to restart, click Ok.

  It starts on the desktop correctly now?

  Kind regards

  DP - K

• Get an error message when turning on the computer, then just get a black screen after the message saying cannont find script file c:/windows/run.vbs

  Original title: windows does not

  I have windows 7 and get an error message when turning on the computer, then just get a black screen after the message say cannont find script file c:/windows/run.vbs

  What can I do?

  Enter your bios usually with keys F2 or delete to the first powered

  Use default Optimize can be the F5 key and save and exit,

  Insert your installation disc or flash media and press F8 or F12 to boot on it

  Then use the recovery tools to run the Startup Repair tool.

  http://Windows.Microsoft.com/en-us/Windows/Startup-Repair-FAQ#1TC=Windows-7

• Pavilion x 360: black screen after log in

  My hp Pavilion x 360 worked very well today in the morning when I turned it on it everything seemed normal I put in the password journal and access the screen once I hit went balck bu the slider was still showign how can I solve this problem since I really need for school?

  Hello

  Try the following.

  Boot the computer normally and log.

  Black screen, hold down the ctrl and alt keys and press delete.

  Select Task Manager.

  Click on file and select the new task.

  Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

  When the system restore interface is loaded, choose a restore point at least 48 hours before the opening of the session the question first and then proceed with the restoration of the system.

  Kind regards

  DP - K

• HP Pavilion PC p2: black screen after log in

  Hello

  My screen on my desktop turns black after login.  I can still see the cursor.  I hit ctrl alt del, went to Task Manager typed in rstrui to do a system restore.  I went back a few months of restoration, but it did not work.

  The weird thing is sometimes I wait about 30-45 min disappears from the black screen.  But then reboot, I have to start the same thing.

  Any ideas or help would be very appreciated.

  Ryan

  Hi Ryan,

  Check the following points.

  Boot the computer normally and log.

  Black screen, hold down the ctrl and alt keys and press DELETE.

  Select Task Manager.

  At the bottom left, select "show processes from all users".

  Click the name column header to organize processes in alphabetical order.

  Look for an entry called to run once Wrapper (RunOnce.exe) - If you see it listed, right-click on it and select end task.

  If your office now appears, download AdwCleaner on the following link (there are 4-5 second delay until it's available)-in your downloads folder.

  https://toolslib.NET/downloads/finish/1/

  A once downloaded, close all programs, open your download folder and double-click the application to run it (click Yes to any uac prompt).

  Click the scan button.

  When the results are displayed, click the Clean button - when you are prompted to restart, click Ok.

  It starts on the desktop correctly now?

  Kind regards

  DP - K

• At the end of the factory restore, but black screen after "Windows has set up the computer.

  The model in question is VC863AA #UUW

  I want to get back the computer to the factory condition, so I rebooted and you press F11. Everything went exactly like this: http://support.hp.com/us-en/document/c00814731#N72 (chapter "Start a restore from the hard drive and the computer is off")...

  .. until step 10, which States:

  "The computer restarts and continues in the installation of Windows. Complete the configuration screens and wait until the computer finishes the installation program. "Then turn off the computer, reconnect all devices and turn on the computer.

  Yes, the computer restarts. She continues in the Windows installation (it says "medan windows konfigurerar datorn Vanta", which means roughly "Please wait while Windows configures the computer"). After that which was for about 5-10 minutes, the text disappears and the computer restarts by itself.

  After that, he gives a normal load Windows Vista bar and after that black screen. It seems to be a little bit alive but jammed somehow. If I let it be for several hours, he goes to the standby mode. If I wake up, he still won't. I can plug a USB another keyboard and he will make some access to hard drive (load a driver probably). I can press the sleep button and it will go into sleep mode. But if I press the power button / stop briefly, it will NOT stop.

  So finally, after several hours I forced to shut down (by pressing the power button / stop longer). When I start it, it goes back to behave as explained in the previous paragraph.

  If I press F8 during startup and select Safe mode, it goes in safe mode and I get dialogue indicating in Finnish:

  «Asenna Windows: Windows ei voi suorittaa vikasietotilassa asennusta.» See devam fenetresdans asennusta uudelleen tietokoneen kaynnistamalla. »

  Rough translation:

  "Installation of Windows: Windows cannot complete installation in safe mode." "You can continue the installation by restarting the computer.

  If I restart the computer, it goes back to the black screen after the windows loading bar.

  This suggests that there is something in the installation of Windows who jams it.

  I can install Windows Vista from a Vista DVD, but then I can't use the software included with the computer. (App States installation cannot install on a machine that is unauthorized, then of course they are looking for some OEM HP things.)

  Any suggestions on how to fix jam that continues with installing Recovery Windows or how to install the software on a normal Vista would be very appreciated.

  I solved the problem. Good thing I didn't order the restore disks, because that would not have solved the problem.

  I decided to post it because I don't know there will be others who have HP Pavilion Elite m9754sc and will have to face this problem of a black screen after the restoration.

  The fact is that the restore worked perfectly, but in this display card driver is buggy and it causes the screen to go black.

  I thought that what I installed fresh Vista which worked until I installed the driver from the recovery partition display. I tried VGA, outputs HDMI and DVI on the factory installed GeForce GT220 and none worked.

  A defective display driver should normally be no problem we could go in safe mode and fix it to the it. But as with the recovery goes to pre install state (ask what language to use etc.), safe mode does not work.

  So the solution is to unlock the display of the motherboard connectors and remove the factory installed GeForce GT220. Once the recovery and installation of Windows is finished using the graphics card integrated motherboards, you can reconnect the GeForce GT220 and get a updated driver with safe mode.

• Persistent black screen after startup on Satellite Pro A210 (PSAFHE)

  Need help, need advice on how to solve a persistant problem with black screen after put into initial service.

  Initially its fine but after the initial Toshiba of the screen just goes black, and the rest in this way, the PC stays on. Have you tried F8 options but all result in the same.

  Help please.

  Hello

  You can access the BIOS by pressing F2?
  Boot from a boot as Recovery DVD disk?

  If both is not possible, I'm afraid you have a serious hardware problem m.
  In this case, I get just speculate on the affected parts. Maybe his problem GPU or motherboard who knows

• Re: Satellite L675-10 t black screen after disassembly problem

  Hi all

  I recently had some problems with my L675-10T overheating, even when I was with a big fan of cooling for the games.

  I realized that the problem resulted from blocked exhaust and dust and it is why, after reading and watching the many tutorials, I opened my laptop computer successfully and all cleaned up.

  The temperature dropped to 20 c and I was happy.

  The next night, however, took my laptop and headed for the living room, and it will stop.
  Black screen and nothing passed. So I ran to the internet and found this solution, it worked btw.

  1. turn off your computer
  2. unplug all wires (including energy)
  3. disconnect the battery from the bottom of the computer.
  4 re - connect the power cable. (the battery should not be in the computer)
  5. turn power on. The screen works. Choose start windows normally. (if you get this screen)

  The thing is, the same thing happened to me this morning as well.
  Twice in 2 days and im a little worried I did something wrong during Assembly of the laptop or something. Any ideas? Or do I keep accountant with the above solution?
  Looks like a mess of power upwards of sorts.

  Thank you in advance.

  Hello

  I assume that this question has not happened before you have disassembled the laptop. Right?
  To be honest this similar issue happened to me to. The portable light not (black screen) after I'm entered in the mode 'sleep'. However, this happened only once

  It s hard to tell why this happened to you it of not impossible that you have damaged something for disassembled the procedure.

  However, the fact is that the warranty is not valid more because you opened the laptop. That is why any approach (especially parts replacement) to solve this problem would cost money.
  So ultimately it s your decision: a technician visit to downtown to see the pieces of equipment or keep your stay with the workaround mentioned above.