my wireless connection to crash constantly?
When I go on the internet or after a few minutes or even a few seconds my internet goes down. sometimes to rectify I have to restart my computer... but there must be a better solution in the long term.
Thank you very much. option 1, that's what I tried the days and it has not been done anywhere. but option 2A really worked and your instructions were great and easy to follow.
Tags: Windows
Similar Questions
-
Satellite 2800 - wireless connection problem
I'm sure this has been covered, but after more than an hour on the forum trying to navigate to find I dropped...!
I recently formatted my hard drive, thinking that I had covered all the bases. No matter what I download to raise wireless internet and running again, nothing works. I have a method NP543 card (works well before) and downloaded and installed everything I'm told to do. I have run the command of thumb between my computers and had no trouble to set up my main computer (xp), mac - the wireless router method but I am at a loss here. He returns constantly with no hardware installed - with being the culprit - ethernet controller message apparently... I downloaded what was informed via the Web from Toshiba site and a few other recommendations randomly the other forums.
I hope someone can point me in the right direction that I work from home and am now about 1 week behind... Thank you!You use the software method to configure the wireless connection? Or do you use the Microsoft Automatic Wireless Configuration service?
You see the connection Wireless in the list?
Can you connect to the connection, but Internet is not working?
-
Tecra A3: Wireless connection problem
I reinstalled windows xp prof after my laptop crashed and lost files.
Everything works except for the wireless connection, it is turned on, but windows will not see it?Any ideas? I tried to download different drivers from the driver from toshiba support page, but nothing has worked.
Hello
When the WLAN switch is set to ON, use the FN + F8 key combination to activate the WLAN adapter. After that do what you will be able to use the wireless network card.
Wireless network card appears correctly in the Device Manager?
-
I do not have the AOL e-mail account now, I need to change my email address to the account. It is a question rather long. 1 tech computer. E Machine W3107 desktop PC. AMD Sempron. Processor 3100 + 1.80 GHz, 1600 MHz FSB, 256 KB L2 Cache, 100 GB ATA hard drive, 1.87 GB of memory; (I upgraded the memory to 512 MB DDR SDRAM) 8 in 1 digital memory card reader, 5 USB Ports, nVIDIA GeForce 6100 PCI-Express Slot available, network 10/100 Mbps Ethernet LAN, Windows XP Home sp3 system, I connect to the internet with 6-AX88772 USB2.0 to Fast Ethernet network adapter. Reason do not use Ethernet adapter was because in the taskbar bar, there was a "Network cable unplugged" warning (internet technician did not want or did not know how) to solve the problem. It's easier and faster just to put the adapter ASIX. My problem is after about 20 minutes. my connection speed is slower than the previous 56K modem. I have to constantly repair the IP address just to stay online when the settings are set to AUTO FIND the IP address, gateway server and DNS servers. If I set these manuely I am always constantly disconnected and it is a repair click without end for the IP address. I can't play POKER in Facebook or Ant other multiplayer game due to the fact that you can't return to your table in FACEBOOK before you are ejected to the lobby, because you've lost the Internet connection. I get disconnected every 2-3 minutes. It's on a regular basis. So sometimes (not often) I stay connected and stay in touch with extremely quick responses. I ran anti-virus, Malware, Spyware scans (no) (clean). I ran Windows tool of connectivity with different results. When Internet Explorer announces that "cannot display this web site" I run the connectivity program and to halfway through the IE analysis opens the web site. ". The newspaper said "it is Impossible to find something wrong with your connection; The icon in the taskbar says I'm connected. Which is not true because sometimes if I download a fike transfer rate will be reduced to "0" (ZERO) at least a minite before he picks up back at a blinding speed of 3-7 Kbps. I started to hate this wireless connection and have seriously thought about back to Dial-up. At least, it was a constant SLOW. and meadows maddness worse. Both browsers then expire too but Mozilla seems to be a browser faster than IE. This happens at the influx of cutting-edge and 03:00 when internet traffic is very light... Little difference, if any. My Email address has changed from AOL. I don't have access to this account anynore. My current address is * address email is removed from the privacy *.
Hello
1. don't you make changes to your machine before the problem?
2. you have any device near your router that may be in conflict with the signal?If so, make sure that devices such as radio, microwaves, mobile phones are kept at Bay.
In the meantime, I wish that you follow the steps mentioned below.
Method 1:
Update your AX88772 6 USB2.0 to Fast Ethernet network card of manufacturer's site and see if it helps.
Method 2:
You can also test the problem in safe mode with network.
If the methods above are little help, you may need to contact your Internet Service Provider for the best help that can be also with slow Internet or abandon the connection.
Let us know the status of the issue.
-
I have a problem with my connection wireless, but only from the House. The laptop connects immediately, but seems to systematically lose the connection even if the signal strength is excellent. It seems that the IP is regularly lost during a connection and must constantly be renewed.
I've been connected with wireless no problem in a cafeteria for the last two hours. I am disconnected only when I'm at home. Is it possible that this is related to security?
Any help would be greatly appreciated.I checked the IP address configuration and received the following message is displayed:
Microsoft Windows XP [Version 5.1.2600]
Copyright (C) 1985-2001 Microsoft Corp.C:\Documents and Settings\Winuser > ipconfig
Windows IP configuration
An internal error has occurred: a device attached to the system is not functioning.
Contact the Services de Support technique Microsoft for assistance.
Additional information: unknown media status code.
C:\Documents and Settings\Winuser >
I also run the network diagnostic tool and received the following notification:
Maps network has NO
[00000002] cisco Systems PCI wireless network
Caption = [00000002] Cisco Systems PCI Wireless LAN adapt
DatabasePath = %SystemRoot%\System32\drivers\etc
Description = Intel(r) PRO/1000 MT connection Mobile - Packet Scheduler Miniport
DHCPEnabled = TRUE
DNSEnabledForWINSResolution = FALSE
DNSHostName = IBM-CCD92CC0547
DomainDNSRegistrationEnabled = FALSE
FullDNSRegistrationEnabled = TRUE
Index = 2
IPConnectionMetric = 1
IPEnabled = TRUE
IPFilterSecurityEnabled = FALSE
IPSecPermitIPProtocols = 0
IPSecPermitTCPPorts = 0
IPSecPermitUDPPorts = 0
IPXEnabled = FALSE
MACAddress = 00:11:25:47:81:6E
ServiceName = PCX504
SettingID = {4B4A6905-63A0-4E1F-BCB0-6346ACF583AB}
TcpipNetbiosOptions = 0
TcpWindowSize = 64512
WINSEnableLMHostsLookup = TRUE
[00000011] Intel PRO/1000 MT Mobile connection
Caption = [00000011] connection Mobile of Intel (r) PRO/1000 MT
DatabasePath = %SystemRoot%\System32\drivers\etc
Description = Intel(r) PRO/1000 MT connection Mobile - Packet Scheduler Miniport
DHCPEnabled = TRUE
DHCPLeaseExpires = 18:31:30 09/30/2009
DHCPLeaseObtained = 17:31:30 09/30/2009
DNSEnabledForWINSResolution = FALSE
DNSHostName = IBM-CCD92CC0547
DomainDNSRegistrationEnabled = FALSE
FullDNSRegistrationEnabled = TRUE
Index = 11
IPConnectionMetric = 1
IPEnabled = TRUE
IPFilterSecurityEnabled = FALSE
IPSecPermitIPProtocols = 0
IPSecPermitTCPPorts = 0
IPSecPermitUDPPorts = 0
IPXEnabled = FALSE
MACAddress = 00:11:25:47:81:6E
ServiceName = E1000
SettingID = {8FD85EC6-0D7D-4F3F-B970-1DD968C12A1F}
TcpipNetbiosOptions = 0
TcpWindowSize = 64512
WINSEnableLMHostsLookup = TRUE
[00000013] Intel (r) PRO/Wireless LAN 2100 3B Mini PCI Adapter (FAILED)
Caption = [00000013], Intel (r) PRO/Wireless LAN 2100 3B Mini PCI Adapter
DatabasePath = %SystemRoot%\System32\drivers\etc
DefaultIPGateway = 10.29.21.254(Same sous-réseau) (PAST)
Ping 10.29.21.254 with 32 bytes of data:
Reply from 10.29.21.254: bytes = 32 time = 8ms TTL = 8
Reply from 10.29.21.254: bytes = 32 time = 6ms TTL = 6
Reply from 10.29.21.254: bytes = 32 time = 6ms TTL = 6
Reply from 10.29.21.254: bytes = 32 time = 2ms TTL = 2
Ping statistics for 10.29.21.254:
Packets: Sent = 4, received = 4, lost = 0 (0% loss)
Time approximate round trip in milli-seconds:
Minimum = 2ms, Maximum = 8ms, average = 5ms
Description = Intel (r) PRO/Wireless LAN 2100 3B Mini PCI Adapter - Packet Scheduler Miniport
DHCPEnabled = TRUE
DHCPLeaseExpires = 15:56:37 11/06/2009
DHCPLeaseObtained = 14:56:37 11/06/2009
DHCPServer = 1.1.1.1 (PAST)
Ping 1.1.1.1 with 32 bytes of data:
1.1.1.1 response: bytes = 32 time = 1ms TTL = 1
1.1.1.1 response: bytes = 32 time = 3ms TTL = 3
1.1.1.1 response: bytes = 32 time = 2ms TTL = 2
1.1.1.1 response: bytes = 32 time = 2ms TTL = 2
Ping statistics for 1.1.1.1:
Packets: Sent = 4, received = 4, lost = 0 (0% loss)
Time approximate round trip in milli-seconds:
Minimum = 1ms, Maximum = 3ms, average = 2ms
DNSDomain = ahcguestnet.com
DNSEnabledForWINSResolution = FALSE
DNSHostName = IBM-CCD92CC0547
DNSServerSearchOrder = 167.177.96.225 (FAILED)
Ping 167.177.96.225 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Ping statistics for 167.177.96.225:
Packets: Sent = 4, received = 0, lost = 4 (100% loss)Hello
Maybe this can help.
My wireless is not working - http://www.ezlan.net/wireless.html
Basic wireless configuration - http://www.ezlan.net/Wireless_Config.html
Wireless Security - http://www.ezlan.net/Wireless_Security.html
Jack MVP-networking. EZLAN.NET
-
on the available wireless connections stop messages
I am constantly irritated by 'view wireless connections' I always use a cable, but I still want the ability to connect wirelessly when IIII wish. I am so tired of this pop-up. I just bought my first laptop w/xp and does not know how to stop the message. Thanks, bruce
Looking for a switch on the laptop that can disable the wireless network when you don't want to use it.
-
Castleville crashes constantly in Google Chrome.
have google chrome and play games on facebook zinga a particularly 'castleville' game crashes constantly, especially when I post to the wall... Ive deleted the extensions etc checked for viruses, deleted programs that cause may be, searched the net repair... any ideas? have noticed when I'm trying to play the game b4 it crashes and tries to connect to facebook what follows (icon.cubic and socpixel.bidsystem) and the other trying to connect too...
original title: hangs constantlyHello
This problem occurs on Internet explore?
I suggest you to check in Internet explore if you are facing the same question.
If you encounter the same problem in Internet explorer, I suggest you to see link and check.
The problems of games online using Internet Explorer
http://support.Microsoft.com/kb/2528246
I also suggest you to contact Google support forum and check out.
https://groups.Google.com/a/googleproductforums.com/Forum/?fromgroups#! Forum/chrome
-
Need help with Photosmart C4795 Wireless Connection
What I have: HP Photosmart C4795
What I use: Macbook OSX 10.9.5, wireless network with WEP security, running, I'm not sure if I have WPS or not (don't know how to say or use it)
Problem: I used it as a wireless printer without problem for the past five years. Recently, I moved and cannot find out how to configure the wireless connection. USB connection works fine. I still have the installation software, and as far as I can tell, it is updated (I'm not positive however.) When I run the HP Installation Wizard, I've got to the point where I select "Set up for wireless" and the HP installation wizard crashes every time. I scoured the forums and have found conflicting advice about this problem. Someone please give me a clear answer. is there something I can do to get the job of wireless or no wireless capability is no longer works with Mac OS x 10.8 or superior?
Ah ha! I thought about it. For anyone who uses an ATT Uverse router, maybe that's your problem. My router is a NVG589 of Arris. I don't know about other routers, but I guess that's the same thing. These routers are capable of WPS, but their default settings have the WPS is off.
You have to
1 access to the properties of your router via a web browser (Safari, Internet Exploere, Firefox, Google Chrome, etc.) to the address http://192.168.1.254/mdc
"2 click on 'Edit your settings or wireless security'", you will need the code printed at the bottom of your router.
3. turn on the 'Wireless Protected Setup (WPS)'From there, you should be able to follow the Setup instructions for printers WPS enabled found here: http://support.hp.com/us-en/document/c02273853
This next set of instructions is specifically for anyone who has a Mac and running the version OS x 10.9 or higher. (If you don't know how to check this, click on the apple icon in the upper left corner of your screen. Select "About this Mac" a box will appear with the information of OS x).
Select Mac OS X.
Select the third option OSX v10.10 Yosemite, Mavericks Xv10.9 OS and OS X v10.9 Mountain Lion.
Select Option 1: Wireless Installation (EVEN IF YOU ALREADY HAVE IT CONNECTED VIA USB.)
Skip the second step and proceed directly to step three.
Select the second method: install the software using Apple software updates
Follow the instructions for the method of the push button.
I hope this helps for those who had as many problems as me!
-
From continuous wireless connection
Hi, I have a new Dell laptop, running Windows 7. Every hour or so I keep losing my wireless connection. When I don't address the problem, he says 'problem with access point or wireless network '. This then solves the problem, but it continues to be. It is very annoying. I had a look at the troubleshooting log and he says: "this computer is constantly switching between two or more wireless routers or access points" I used google for this problem and tried all the suggestions I can find, but the problem persists. My wireless card couldn't be wiped out? Thanks for any help.
Hello
Thanks for posting! If I understand correctly, you are facing problems with the Wi - Fi connection. Correct me if I'm wrong!
Before I continue, I would like to collect some personal information.
1. have there been recent changes to the system before the show?
2. What is the brand and model of the router Wi - Fi?
3 have. what method of troubleshooting you followed?
Method 1:
Follow the link and run the network troubleshooter utility. Check if it helps.
Using the troubleshooter from network in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
Method 2:
Follow the link and follow the steps. Check if it helps.
Windows wireless and wired network connection problems
For more information, please visit: http://windows.microsoft.com/en-US/windows7/Wireless-networking-frequently-asked-questions
Answer us with the results. I'd be happy to help you further.
-
Could not get the internet/wireless connection after you installed new hard drive?
I have a HP Pavilion Entertainment PC (dv6736nr), Windows Vista laptop. The hard drive crashed and I got a new installed. I set up my wireless connection, even that is on the other 4 computers in this building (my desktop computer running win7 netbook win7 running 2 computers of the landlord, winVista running - they have comcast modem,? a good router) when I set up the wireless connection, it connects only 'local', no internet. I researched this some, tried all the places with a parameter that can be a problem, but nothing helped. What the hell did I miss? The connection is good because it works on my desk, on which I write, as I said. To my knowledge, the hard disk the the wireless are not connected; or is it? Any help, the concrete steps that I take on my laptop, the settings themselves, would be greatly appreciated.
Hello:
If your laptop computer is the Atheros wireless card, you probably just update the driver.
The symptoms you listed seem to indicate that is the problem.
Paul
-
CC of hearing crashes constantly.
To give as much detail as possible:
With the help of a laptop running windows 8.1. I use the latest version of the CC of the hearing. I have a Mackie MCU Pro for the via USB control surface and a Focusrite 18i20 for my audio interface. I imported some of the v2 of export OMF files into Logic Audio. Once I import it, I save a file .sesx for the native support hearing.
After opening, work seems to be fine, but as soon as I try things like adding effects on anything, the application starts to hang and be unable to do anything else than killed by the Task Manager. The app is still to play the audio if I had opened audio, but its actually not not much else. I got it during a few minutes editing on a regular basis. Is it a problem to import OMF? A problem with the builtin plugins? I seem to see less crashing if I made the tracks and I'm editing of many titles, (sometimes up to 30 I think that, as it's the music of my group that I mix)
I was with logic 8, but its not supported on Mavericks more and only partly working, so I'm moving to the hearing.
Any ideas what could be causing crash constantly? If I register, then make another change, I was OK, but definitely lost some data. When it crashes, continue using used to confuse me because it does not by default display of the multitrack session .sesx, instead it showed one of the audio files randomly. The last time that I had an accident, I realized that and seem to see that it can be save correctly, and I have to select the main session, not the audio file it does default to. Does anyone have any suggestions on how I can make the application more stable?
~ Phil
In the sake of troubleshooting, have you tried working without connected Mackie control surface?
-
MacBookPro OSX El Capitan; Version 10.11. Retina display - MacBookPro connects to the printer HP C6150 help electrician with no problems. not then attempt to use the bluetooth connection.
To a printer wireless connection works using old MacBook. Bluetooth connects to the mouse and works very well.
Select the Bluetooth device-
The computer icon shows - not connected
Apple mouse - connected
Hello analyst.1,
Thank you for using communities of Apple Support.
I understand that you can print from your MacBook Pro to your HP using Ethernet and wireless printer, but not via Bluetooth. I know how it is important to ensure that you can connect to your printer via Bluetooth. I'll be more than happy to help you with this.
Use OS X El Capitan: Add or remove a printerand make sure you have the latest version of the software installed and printer connection instructions, specifically, this section:
Add a Bluetooth printer
Update your software: choose the Apple menu > App Store, click updates, and then install the listed software updates. Even if no updates appear, this ensures that OS X has the latest information on printing software you can download from Apple. If you don't do this, you see a message that software is not available when you connect your printer.
If you have a printer AirPrint, you have no need to check the software updates.
Prepare your printer: use the instructions that came with your printer to unpack the printer, install the ink or toner and add paper. Turn on the printer and make sure it is not the display of errors.
Connect your printer: follow the instructions that came with your printer to make sure it is ready to connect through Bluetooth. You must also make sure to activate Bluetooth and set up the printer Bluetooth as a new device.
After connecting your printer, if you see a message prompting you to download new software, be sure to download and install it. OS X will automatically use AirPrint if your printer supports.
Have a great day!
-
How to configure a printer wireless connected to Time Capsule?
I just bought a printer HP Color LaserJet Enterprise M577z MFP Flow. It has capabilities of wireless printing. So far, I was able to connect wirelessly to one of my MacBook Pro computers, but only by having the printer create an Ad - hoc network that allows up to 5 devices to connect to the printer. But that of not what I want because every computer should manually disconnect the Wi - Fi network, connect to the Ad hoc network, the print job and then reconnect to the Wi - Fi network whenever a print job is required. It is very difficult and frustrating.
What I would like is striking is the printer act like a network printer by wireless connection to my Time Capsule. I can't connect the printer to the USB port of time Capsule because they are far away from each other, and I don't want to use cables throughout my place. But I have no idea on how to do it because I can't find this option in the menu of the writer or configuration of the United Nations the HP utility software.
I hope someone here could help me, please. Thank you!
I have an Epson printer, so some of my experiences may or may not apply.
I also have a time Capsule, and my printer and Time Capsule are far apart.
My current configuration looks exactly what you are looking for: a wireless network provided by Time Capsule than all my Apple devices to a wireless connection, and my printer connects to the same wireless network.
When I first bought the Epson printer, I needed to connect it to the Capsule of time via a USB port. This sounds as if it were true for you as well. So, for this very short period. I moved the printer via the USB port next to the printer, the connected Time Capsule, made the setup and then the printer recognized my standard wireless network. I've returned to steady state, which I use now, with the printer and the far (actually on different floors) Time Capsule.
-
My crush of sugar that ap crashes constantly on my iPad. What can I do?
MY crush of sugar that ap crashes constantly. What can I do? I just bought their price package in the hope that it would solve the problem, but he then crashed twice more. Sometimes it crashes before I even start the game. Other times it crashes while I am in the game before I can finish.
Can you please tell us which version of the iPad and what iOS?
Also try to delete (if possible) the app
Force restart the iDevice
Restart your iPhone, iPad or iPod touch - Apple Support
Then re download the application and see if the situation improves
-
7520 HP loses the wireless connection. What can I do?
I've seen lots of talk about HP products, loss of wireless connection. I have the same problem with my 7520. Initial Setup is perfect, but he began to lose the connection when it went into standby mode. Someone at - it a solution?
THERE IS A FAST SOLUTION!
On April 18, 2014 (page 11 of this thread), I posted a quick solution. My HP7520 printer has worked on Netgear router WIFI 7550 flawless since then. I suggest you read this post.
From long experience with HP, I found they have great hardware, but their software has always been dismal. The ultimate "fix" would be for HP address their failure of a software that allows to my difficulty in working.
A single "tweak" in the router security settings wifi will do. The rest of settings changes other people have suggested are short lived (about an hour in most cases), while they don't be reconnected unless they restart everything. It makes sense because of what is happening.
The single "twist" parameter should logically point HP programmers to where in the firmware, there is the problem. They listen to? And, really, it doesn't matter on all other settings printer and router. All mine are back to the default settings and it all still works very well.
Go to a BBQ and stop wasting your time on this issue.
Ken
Maybe you are looking for
-
Reader SuperDrive does not recognize blank DVD
Have recently upgraded to El Capitan. Since then, I tried to export photos on the drive to put in stock and my DVD burner in my iMac 12.1 will recognize is no longer the DVD when entered into the burner. What is happening now is that the DVD is sitti
-
my tablet of flow 7 hp there monitoring on this subject
Please respond as soon as posible because my Tablet just got stolen. I want to know if it can be followed? Thank you!!!
-
HP Pavilion 15-n224sg Windows 7: various sind nicht zufinden Treiber
Hallo, ICH habe Windows 7 Home premium auf meinem HP Pavilion 15-n224sg nun finde ich keine Treiber für die following devices installed: Ethernet controller PCI-Gerät SM Bus controller USB controller Auch auf Seite von Treiber HP sind nicht zufinden
-
Update Win10 and RAID 0 on a S7-392
Did the update of Windows 10 on a Aspire S7-392 maintains the RAID 0 works correctly?
-
BlackBerry smartphones too much message icons
Hello I tried and tried to solve this - if anyone can help then this is fab... I have too many message icons on my BB Bold 9700... I have one for my email - useful work! One of my SMS and MMS - useful! One for my personal email - useful! And then a s