my wireless internet is extremely slow, (about 1-6 KB/s) but when I connect a network cable, it's normal speed.

Similar Questions

• Qosmio F20-155 wireless internet is too slow

  I got another laptop with me that surfing on the net fast but when I use my Qosmio is quite slow?
  Is this something with the settings or all portable Qosmios are the same?
  Help me please!

  Hello

  AFAIK the Qosmio F20 was delivered with the 802. 11 b/g WLan standard.
  Generally, the settings are set to b and g. In this case, you can use both options. But if settings are only to b, so the card only uses this standard.
  The 802. 11 b is slower then 802.11 g
  Speed wise 802. 11 b provides up to 11mpbs gross rate or on 5.5 Mbps after Protocol. 802 11 b is compatible with working with the largest number of installed networks, including all the public hotspots. 802 11 b is also backward compatible with 802.11 products g, because they use all both the frequency of 2.5 ghz ISM band.
  802.11 g has gross rate 54Mbps or about 20mbps throughput after real Protocol or 45mbps overload in turbo mode. If your application involves high speed bypass or copy large files, over 100 MB then 802.11 g is worth watching. Distance wise 802.11 g will only provide the maximum 54 Mbps connection nearby usually less than 100 feet. After this, the connection returns to 802. 11B speeds. Access 802.11 g compatibility points can be set in mode dual b and g taken in charge. There is a problem with this from only a 802. 11B client associates all clients on the network are expelled downwards for 802. 11B speeds. This can be solved by putting in only g mode access point.

• My Mac Mini is extremely slow and any video will start but soon stops and intermittently starts and stop immediately. What is the reason?

  My Mac Mini (end 2012) 2.5 ghz memory 8 GB Yosemite 10.10.5 is extremely slow. I read a few articles on communities, but unable to solve the problem. I plan to upgrade memory soon. In addition, a video game doesn't quite work. It starts and stops in 5 seconds and restarts it for a few seconds and stops completely. An advisor to fix the problem will be appreciated.

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Windows Vista was slow so I restarted and now my internet is very slow. Try to run updates, but I get error code 80072EFE.

  original title: SLOW INTERNET

  I restarted windows vista because he was running like junk. Now the computer works normally, but the internet is PAINFULLY slow. It worked until I reinstalled vista. My cable is in working condition. I can only load half of a Web page if I'm lucky. Is there a port or something that I need to open to let my internet go to more than 9 bytes/second? I have to ask this on another computer because it would take 6 years for this thing to load. I get error Code 80072EFE when I try to update. Help me because im losing all faith in microsoft.

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:

  Try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  Method 2:

  For Windows update, error check this link and follow the instructions in the link below and check, if this can help:

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80072efe-or-80072f76

  It will be useful.

• Remote Access connects with shared connection, but when I connect the Ethernet to the box Belkin Wireless cable, there is no network connection

  I have dial-up internet. I have to computers. A PC running XP and a laptop that is running Windows 7.
  I have the connection shared, if I plug the Ethernet cable to the laptop, it will connect to the internet. I just bought a Belkin G wireless router.
  I want to know how to configure it, then the router Belkin Wireless put the switched signal shared wireless. I know it's possible, I'm not sure what I'm doing wrong. It is constantly with him saying on the phone "the DNS server does not respond.

  Connect the Ethernet cable from your PC to the WAN (Internet) port on the wireless router.  Do not connect to one of the router's LAN ports. Boulder computer Maven
  Most Microsoft Valuable Professional

• Windows Vista is running extremely slow and will not open the Task Manager or connect to the internet

  I have an older Dell running Windows Vista, and it started fine when I got it, but about a month ago it started very slow and refusing to open any program. I can't get the Task Manager to open to all and internet Explorer refuses to connect. I did a complete analysis of the system through Viper and it came out saying: there is nothing more than a few trogans. He also started a taskbar at the top of the screen. No idea how it happened either.

  Hello
  Your computer is probably infected by malicious software. Try following the steps in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide/
  It provides simple instructions on how to remove malware from a computer. If you have any questions, just ask. I hope this helps you.
  Brian

• Wireless Internet is very slow on Notebook G7

  I have 4 month old laptop HP-G7-1070us. There adapter without wireless/bluetooth Broadcom 4313 combo. I have never got better

  1.50 MB/s download speed @ speedtest.net. Router is Linksys WRT160N. I get 15 Mbps speed of downloading if I boot to Linux Mint using the USB. The router firmware has been upgraded to version 2.11. My Toshiba A205 Satellite card AR5007 and gets to Win Vista 19.50 MB/s download speed sitting next to my provider Internet HP. is Comcast Cable ethernet adapter works fine. I tried 4 months for this work because I like the challenge, but now I need help. I think there must be a Windows 7 configuration problem. A 695 MB file takes 12 hours to download but 12 minutes on Linux and on Toshiba and is unusable in the video streaming in the windows.

  Thanks for any help.

  I have reset the mode on my router to stream 'G' rather than 'mixed' mode only This solved my problem.

  He also cleared up the terrible problem buffering, that I got with my blackberry cellphone that uses my home network.

  I can now achieve 18 + Mbps download speed according to www.sppedtest.net.

• EXTREME slowing windows 7 professional 64-bit response time, possibly problem driver network adapter? Help, please!

  I have Windows 7 Professional 64 bit installed on a computer, I built

  Data sheet:
  Processor Intel i5 750 (stock clocked & stock cooler)
  Card mother Gigabyte GA-P55A-UD3P
  G. Skill Rip jaw DDR3 1333 RAM (standard timings)
  Western Digital 640 GB SATA HD
  Card EVGA 8800 GS SC Video
  Creative Sound Blaster Audigy SE sound card
  Powersupply Coairsair 650W
  Samsung SATA DVD writer

  My problem is, after I started and had my computer running for a significant amount of time (30 minutes to an hour), I loose full internet connectivity and the response time for any action I'm trying of the preform is from 30 seconds to 5 minutes.

  This problem occurs almost every time my computer is started for a significant amount of time, and it's extremely annoying.

  First Firefox, Google chrome, or internet Explorer stops receivers internet connectivity (because it is not sailing to any web page) but still related reports.

  (during this time and on my computer don't report any anomaly, IE CPU utilization / ram uses / temperature are amounts all acceptable)

  I usually try to close my browser (s) web, but its reports "not responding" and I cannot close or even end the process or the process tree, so it runs as a process. From there a program or a click I do I try to run either doesn't work or takes 30 seconds to 5 minutes to register if they register at all.

  Programs I all ready have running continue to run, IE Vuze, WindowsMP, Zune software, openoffice. But once that I close them I can't reopen.

  Any program I try to open starts a process in the Task Manager but it not to start a program or actually run, and I can't used to finish the tasks that do not work properly.

  If I try to shut down windows, it takes a minute or so to begin to disconnect, then he sits on the "logging" off the screen until I use the power switch to kill the system.

  I suspect that it may be a problem from my network card driver (Controller Realtek PCIe GBE Family, latest version downloaded directly from the Gigabyte website for my motherboard) because the question almost always starts when my internet stops working. However, this may be 2 combined numbers.

  I had this problem and I thought it was because of an installation of bad windows 7 so I erased the hard drive and did a complete new installation, but the problem is back!

  I changed my routers settings to give me a fixed IP address to dismiss questions here. All the other computers in my House have access the internet without interruption during my problems. And no other computer in my house has similar problems.

  I reinstalled the network once drivers without success.

  I would like to address the downturn extreme Windows 7 after half an hour or so if possible because I have other NICs lying there if the problem comes from the network card.

  I'm pretty computer savvy and I've exhausted all my ideas, so any notice are useful! Thank you

  OK, so I think that the slow issue is resolved now. I blame intel speedstep, while part of my problem is fixed.

  Internet connection problems still remain.

  I ran my computer in safe mode with network for about 2 hours. When I booted in safe mode, everything was fine, internet connetion worked on download and upload at full power. I let it sit for an hour or two in safe mode and I came back and there is no internet again, as usual. All my browsers (internet explorer, my main browser firefox and chrome) refuse to function / load anything and their work will not end in the Task Manager. The device says it all works and it (network adapter) said I have a connection, but I am squatting me on my browsers or any other uses of the Internet. This test will run on a network interface card that I installed, with drivers. I did him wrong with shooting my motherboard cable network and its software driver port. This new card gives the same result, so I think now I know that this issue has nothing to do with my physical port or its drivers.

  The only things I can think that it either now are either:
  my router
  However, all the other computers in my house (3 of them, 1 win XP), 1 Win 7 64 bit pro, 1 Ubuntu and my Xbox 360 not having this problem and works perfectly

  or

  Something inside windows 7 that control the browsers or manages connections,
  I think it's most likely due to the fact that my browsers have problems in the Task Manager / they do not work properly

  All reviews are useful,

  Thank you!

• no internet on-site, but when not connected to AD it will be granted to the internet. Help, please!

  Hi all

  I want a solution to my problem.

  I am a newbie with microsft, running windows server 2008 Enterprise edition server. I want to deploy server containing AD, DNS, and DHCP server. RRAS is also enabled for internet sharing, all are taking place right now. I have two NIC with private, my client be trendy, and public ip address of my ISP.

  My problem is that whenever I connect my client pc to my private ip it automatically access the internet. he acquires the default gateway and DNS that I created in my server.

  What I want is that whenever I connect my client on my server it would be only connected locally, not in the internet, and when I join my client to the domain (AD) the only time that my client would be granted access to the internet.

  Please help me. im just a beginner.
  Thank you very much.

  Hi Ryan,

  I suggest you to report this issue in support for Windows Server 2008 R2: http://technet.microsoft.com/en-us/windowsserver/bb512923

  Thank you.

• Fedora slow 21-stop (2 minutes) and crashes when you connect

  Fresh installation of Fedora 11 workstation in my computer 11 using pretty much computer settings default virtual (4 cores, 8 Gig ram, 50 gigs HD) stored on SSD. Closing (init 6) gives the appearance of hanging, but 2 minutes later it begins happily again. It also start directly at the exit of the Live CD.

  However, to launch the live CD in virtualbox, it disconnects correctly and shutsdown almost instantly.

  Welcome to the Windows 7 64 bit computer.

  Any help appreciated.

  Took me 3 months, but I found a solution and it stops immediately and properly disconnects.

  It is in this link:

  Re: Still crashes Fedora 21 / slow to start and stop

  Otherwise, it is interesting to note that you can press CTRL-ALT-F2 to the console text, connection and init 6 or init 0 work almost instantly as well.

• Question about creating report guests editor BI when it connects directly to the database?

  Hello

  I create a report of BI Publisher using direct SQL server database. JDBC connection is created, then datamodel and report.

  The report is parameterized. Now I have attached the dashboard report. But now the settings are not filling. So I intend to create guests, but it is the search for field. But I don't use of RPD. So, how can I create guests when we creating BI publisher report connecting directly with the database? Please let me know.

  Kind regards
  Sam

  Hi Sam,

  I hope you got your answer for that starting from the thread OBIEE quick dashboard for BI Publisher

  Thank you...

• Sometimes want to HP goes extremely slow

  Hello

  I wanted my HP Touchsmart 15-J102sa for about 3 months now and since I got it, it works really slow time. It occurs most often when I'm on the Internet or watch a video on youtube. When he starts the slow race, he says that the page is not responding for about 3 minutes, and then it displays the page and start working again at normal speed. I really need any kind of solutions that could fix, I know for a fact that it is not a virus, because I scan pc every time I turn it on.

  Thanks in advance

  Hi LuLu786,

  Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I see that you have some problems with the urge to slow down when online. I suggest that you first try another browser (Google Chrome or Mozilla Firefox) to see if the problem arises here as well. I have included two documents below to help improve the performance of the system according to your operating system.

  Improving the performance of the system (Windows 7)

  Improvement of the performance of the system (Windows 8)

  Thank you

• Download of virtual machine using extremely slow browser data store

  Hello

  Why download VM files totalling nearly only 8 GB in vSphere Client v4.1.0 (from 4.1.0 ESXi) via a Gigabit LAN would take more than 1800 minutes (30 hours)? Well now after about 5-10 minutes to download, it is said 1560 minutes but still, why is it so slow? I thought that perhaps is that the estimated time remaining is miscalculated, but this isn't the case. The download is just extremely slow.

  Not only that but vSphere Client (VpxClient.exe) constantly uses 25-45% of my cycles while all CPU's do the downloading of files. This slows down the PC I am running vSphere Client. The local network on the server and the client connections are Gigabit too.

  UPDATE: download time now has increased up to 1924 minutes back and it becomes difficult to use my PC for e-mail in Outlook, etc. because vSphere Client seems to use as many cycles CPU.

  UPDATE 2: 2 hours for download via vSphere Client and remaining time jumped up to 2287 minutes. I'm going to cancel and try to download via the web browser interface.

  See the attached screenshots.

  Thank you

  Derek

  Yes. Choose to export to the format of the workstation.

  André

• Satellite U-305 wireless Internet connects at 54 Mbps, then freezes

  Using wifi internal adapter Express Card or a USB wifi adapter I can connect to the internet, but when the initial page download bar reached to halfway it grinds a setback.

  The pressure gauge shows a five bar connection to 54 Mbit/s on the whole.

  When I connect with a cable, I get 100 Mbps and full, quick internet access.

  This occurs with Firefox, Internet Explorer or AOL.

  This happened all the time that I had this computer.

  The wifi on my other wireless, T Palm device. X, works perfectly.

  Thanks for any help.

  What anti-virus software and firewall you have installed? Maybe they cause Internet problem.

  Have you tried to update the driver for wireless LAN device? (see the Web from Toshiba site)

  Also update the BIOS.

• Time Machine extremely slow after upgrade to El Cap

  Time Machine problem with upgrade to Yosemite to El Cap on a laptop MBPr 15 "mid-2012.

  Time Machine backup plan: by wifi or LAN cable for two different hard disks attached to a Mac Mini that is on the local network. Two USB mini drives would serve as a backup for a total of 4 Mac disks at home.

  Behavior of Time Machine in Yosemite: dead normal. Backups were fast (10 Mbit/s in wifi, 80 MB/s when I plugged the MBPr on my LAN using a bolt of lightning for the Ethernet card.) Restored backups (I test them sometimes) fine.

  I upgraded yesterday to El Capitan. Behavior of the time Machine now: excruciatingly slow. All the steps (preparation, backup, cleanup) takes hours. My laptop was connected to the wired LAN for 9 hours now and is only 1.26 GB thanks to a backup of 3.82 GB. Speed (from MenuMeters) is under 10 KB/sec - Yes, it is * kilogram * bytes/s.

  Speed of transfer of files between the two machines via drag & drop is very good, ~80MB/sec both on the LAN, about 12 MB/s in wifi. Laptop computer interacts with the web at normal speeds. It does not appear that Time Machine, which is watered, and only on my laptop of Capitaned newly-El. My other domestic machines (all on Yosemite still) back up normally.

  I tried:

  -power / reboot both machines.

  -power / restart the LAN together.

  -cycle Time Machine power switch in the Prefs system.

  -Remove the two drives as backup targets TM laptop, then re - specify with preferences TM;

  -other things that I found through the search for this problem.

  It is a common problem in judging by the many valuation model who met it. I searched a lot and found nothing that helped me.

  I can't work without a viable backup. For now, I use Carbon Copy Cloner to duplicate my SSD MBPr for an external hard drive. Not really satisfying.

  Did someone solved this problem? Can someone tell me or suggest a solution? Thank you very much!

  Please make a copy of test in the Finder of the source for the backup volume. Is it too slow? Delete the files copied from the backup volume after the test.