MyRio disconnects start VI

Hello world

Having a major problem with my MyRIO currently. I set up a (fairly complex) VI, who until last week worked no problem, made a few minor changes to him these days, which, according to LabVIEW, are very good. The program displays all errors before launch. However, when I connect to the MyRIO to run the VI, it will run for about 3 seconds and then disconnects my MyRIO. No reason is given, and no error log or error message appears to explain why this is happening.

If anyone can shed some light on this situation it would be greatly appreciated

Todd

P.S. attached the VI below, the program has been running for the open loop VI or VI of closed loop

I get that quite often on the cRIO, too.  The main cause is that I forgot to include a time delay in a loop somewhere.  Sometimes I just too treatment to follow.

The cRIO (and I am sure that the myRIO, too) has an operating system trying to divy time between several tasks.  One of these tasks (and probably with the highest priority) is your application.  Another task is now in communication with LabView on your computer.  If your application does not have enough CPU, communication gets hungry and removes the links.

You can probably see the web page generated by your myRIO, to see what is the CPU usage.

Tags: NI Hardware

Similar Questions

  • SSL VPN Portal Page - frequent disconnects

    Hi all

    I've implemented two firewalls to two DCs - London and Swindon. Now, I'm traffic to these two firewalls by using a URL to load balancing. When users try to connect to the URL (which indeed resolves to the IP address of the two firewalls Internet oriented interface), they faced frequent disconnects. The portal will be open for a few minutes, and as they are by clicking on the bookmarks on the page they get automatically disconnected. It is completely random and there is no model it.

    However, I wrote the following:

    1 if I clear my cache and Temp files and then try to access to the portal by using the URL, it works fine for a little longer (maybe 15-20 minutes) and then the same disconnect start all over again

    2. If I try to access all the IP addresses of the firewall (do not use Uruguay Round), it seems to work fine.

    Can someone let me know what could be causing the problem?

    Thank you!

    Hey riri,.

    You can check the activation of the ASA connects and debugs, a 'see the connection' and ' debug webvpn 255 "will be useful to check if the SAA is disconnect the session.»

    Alternative, you can run wireshark on a computer and make sure the IP reset is coming,

    See you soon,.

    -Randy-

  • HP Envy 17 J11tx: Capricious USB Ports

    My USB ports have ALL (4/4) disconnect started all peripheral USB is inserted. Iintially recognizes them, but after a few moments, it disconnects them (I get the tone on my laptop) and the device disappears, only to be reconnected a few seconds later.

    Super boring. It plays just like above all the time, the device is connected.

    Certainly my ports, not my devices as have tried on other computers etc, other peripheral...

    Laptop is less a year

    Thank you!

    Many people have this problem with Windows 8.1 Microsoft pushed an immature technology outside the market, a technology that is openly hostile to some old USB devices, and not playing is not very pleasant with some new USB devices as well. Just search google for 'disconnect a USB devices intermittently' and you'll find you're not alone. The good news: your hardware is fine, what are your USB devices. The bad news: Windows is not very well with your USB devices. Try disabling "USB selective suspend" in power options. If we don't talk of external hard drives USB selective suspend does not help solve the problem, we will have to do a regedit.

  • maximum lines on the form of tables (report)

    Hello

    I have a recording of multiple tabular (report). It displays only records 1-15 with pagination to other pages.
    When I set the "Number of rows" field always displays 100, save 1-15 only.
    I just want to see the complete set of data on a single page, without pagination. (There's a top filter there will be never displayed more than 100 records)
    Is this possible?

    Please let me know.
    Garcol

    garcol wrote:
    Sorry, but it's not working do not...

    Disconnected, start new IE etc. But still only 15 folders...

    http://pics.IMCDb.org/909/Fout.jpg

    Do not set anything in number of lines (point). This is used to identify an element of the page containing the number of lines to allow users to control it. Remove * 99 * from here.

  • Product serial No.

    I bought adobe cloud membership but did not get the activation key for first pro CC what should I do? do I still need to buy each product separately?

    Thanks for the help in advance.

    Hi smartd1011,

    The IAB based onAdobe Id then it shouldn't ask for serial number.

    Might try this,

    Try running the office creative cloud from the Start Menu (WIn) or Applications (Mac) folder. If she opens the CC App should be on creative cloud desktop automatically update.

    Once opened, the Office of creative cloud sign out of the application of preferences > General > account section.

    Once disconnected, start a CC product, click on the button "license this software" and sign in with your Adobe ID again.

    OR

    Connect you or activation errors. CS6 CS6, CS5.5, Perpetual subscriptions

    http://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-i ssues.html

    Before any troubleshooting, please confirm with the compatibility of the computer OS & version to the:

    http://www.Adobe.com/products/premiere/tech-specs.html

    You can check this link too:https://helpx.adobe.com/premiere-pro.html

    Kind regards

    Baudier

  • Glib-2 crash. 0 VIX1.7 against Server 2

    Call the code several times now below causes an exception. If anyone can check this?

    Private Sub TestConnect()
     Dim _host As New VMWareVirtualHost
        _host.ConnectToVMWareVIServer(New Uri("https://172.16.2.5:8333/sdk", "user", "pass", 30)
        _host.Disconnect()
        _host = Nothing
End Sub

    Tested against vmware Server 2 / / version = 2.0.0 build = build-122956 with 1.3 on VIX 1.7 VMwareTasks

    I tested against 4 different hosts Server 2.0.0 with similar results.

    Recently, we found and fixed a bug here.  What triggers it is make the connect/disconnect quickly, so that the disconnection starts while we always receive data from the server.  There was some bad dealing with code to throw the late responses.  It should not matter if the server is Server 2.0 or ESX flavor.  But his lots of timing, so its quite possible that you see on the server 2.0 because this system is slower than your ESX boxes (esp since Server 2.0 must share.)

    If your problem disappears with a short sleep between, then its probably the same bug.

  • ADAM Target Recon questions

    Hello experts,

    I need to deploy an ADAM connector in the system.
    Because there is already a connector AD, I have reproduced the AD one and I've implemented it as an ADAM.

    I was able to correctly reconcile the search for the Organization, the commissioning went very well, but the Recon target seems sends problems.

    According to the documentation of the connector, I traced only required fields of ADAM:
    -J' added in resource objects only the cn, upn, displayName, sn, givenName, accountExpires and the ObjectGuid and I created a profile of reconciliation
    -J' added in the process, the fields of reconciliation, mapping of the CN, upn... to the column of the ADAM object
    -J' have changed the search in relation to the areas of reconciliation, keeping just the previous fields
    -J' added User Login rule == common name (no samaccountname in ADAM)
    but when I run the target user Recon task does not work.

    I ran this simple test: I create John Smith in IOM, I have available, I change his first name to Johnny in ADAM and I him reconcile.

    Even if from the Console of Admin, I see that the task is completed with a State of success, "The TimeStamp of a/d converters" remains at zero and no event is present in the "reconciliation events.
    In addition, in the trace to the TRACE log: 32, I have the following error, but it didn't help me find a solution.
    A larger extract of the newspaper, I see that it gets properly ADAM user information, and all fields are filled in correctly.
    I have a feeling that this may be because something doesn't work not with the rule, even if it takes the right information to ADAM, he is not able to understand what user IOM assign the ADAM Object.

    You have an idea?


    ___________________________________________


    [2012 02-03 T 10: 31:40.389 + 01:00] [oim_server1] [TRACE] [[OIMCP.] A/d converters] [tid: OIMQuartzScheduler_Worker-5] [username: oiminternal] [ecid: 0000JKyzKbD5e_d5HfT4if1FAfz4000002, 0] [SRC_CLASS: com.thortech.util.logging.Logger] [APP: IOM #11.1.1.3.0] [SRC_METHOD: debug] com.thortech.xl.schedule.tasks.ActiveDirectoryReconTask: processUserChange: STARTED
    [2012 02-03 T 10: 31:40.390 + 01:00] [oim_server1] [TRACE] [[OIMCP.] A/d converters] [tid: OIMQuartzScheduler_Worker-5] [username: oiminternal] [ecid: 0000JKyzKbD5e_d5HfT4if1FAfz4000002, 0] [SRC_CLASS: com.thortech.util.logging.Logger] [APP: IOM #11.1.1.3.0] [SRC_METHOD: debug] com.thortech.xl.schedule.tasks.ActiveDirectoryReconTask: modifyAccountControlValues: STARTED
    [2012 02-03 T 10: 31:40.390 + 01:00] [oim_server1] [ERROR] [[OIMCP.] A/d converters] [tid: OIMQuartzScheduler_Worker-5] [username: oiminternal] [ecid: 0000JKyzKbD5e_d5HfT4if1FAfz4000002, 0] [APP: IOM #11.1.1.3.0] =.
    [2012 02-03 T 10: 31:40.392 + 01:00] [oim_server1] [ERROR] [[OIMCP.] A/d converters] [tid: OIMQuartzScheduler_Worker-5] [username: oiminternal] [ecid: 0000JKyzKbD5e_d5HfT4if1FAfz4000002, 0] [APP: IOM #11.1.1.3.0] com.thortech.xl.schedule.tasks.ActiveDirectoryReconTask: processUserChange: null
    [2012 02-03 T 10: 31:40.394 + 01:00] [oim_server1] [ERROR] [[OIMCP.] A/d converters] [tid: OIMQuartzScheduler_Worker-5] [username: oiminternal] [ecid: 0000JKyzKbD5e_d5HfT4if1FAfz4000002, 0] [APP: IOM #11.1.1.3.0] = []

    ]]
    [2012 02-03 T 10: 31:40.395 + 01:00] [oim_server1] [ERROR] [[OIMCP.] A/d converters] [tid: OIMQuartzScheduler_Worker-5] [username: oiminternal] [ecid: 0000JKyzKbD5e_d5HfT4if1FAfz4000002, 0] [APP: IOM #11.1.1.3.0] = start a Stack Trace =.
    [2012 02-03 T 10: 31:40.397 + 01:00] [oim_server1] [ERROR] [[OIMCP.] A/d converters] [tid: OIMQuartzScheduler_Worker-5] [username: oiminternal] [ecid: 0000JKyzKbD5e_d5HfT4if1FAfz4000002, 0] [APP: IOM #11.1.1.3.0] com.thortech.xl.schedule.tasks.ActiveDirectoryReconTask: processUserChange
    [2012 02-03 T 10: 31:40.398 + 01:00] [oim_server1] [ERROR] [[OIMCP.] A/d converters] [tid: OIMQuartzScheduler_Worker-5] [username: oiminternal] [ecid: 0000JKyzKbD5e_d5HfT4if1FAfz4000002, 0] [APP: IOM #11.1.1.3.0]
    [2012 02-03 T 10: 31:40.399 + 01:00] [oim_server1] [ERROR] [[OIMCP.] A/d converters] [tid: OIMQuartzScheduler_Worker-5] [username: oiminternal] [ecid: 0000JKyzKbD5e_d5HfT4if1FAfz4000002, 0] [APP: IOM #11.1.1.3.0] Description: null
    [2012 02-03 T 10: 31:40.400 + 01:00] [oim_server1] [ERROR] [[OIMCP.] A/d converters] [tid: OIMQuartzScheduler_Worker-5] [username: oiminternal] [ecid: 0000JKyzKbD5e_d5HfT4if1FAfz4000002, 0] [APP: IOM #11.1.1.3.0] [[] java.lang.NullPointerException
    at com.thortech.xl.schedule.tasks.ActiveDirectoryReconTask.modifyAccountControlValues (unknown Source)
    at com.thortech.xl.schedule.tasks.ActiveDirectoryReconTask.processUserChange (unknown Source)
    at com.thortech.xl.schedule.tasks.ActiveDirectoryReconTask.processBatch (unknown Source)
    at com.thortech.xl.integration.ActiveDirectory.tcADUtilLDAPController.searchResultPageEnum (unknown Source)
    at com.thortech.xl.schedule.tasks.ActiveDirectoryReconTask.performReconciliation (unknown Source)
    at com.thortech.xl.schedule.tasks.ActiveDirectoryReconTask.execute (unknown Source)
    at com.thortech.xl.scheduler.tasks.SchedulerBaseTask.execute(SchedulerBaseTask.java:384)
    at oracle.iam.scheduler.vo.TaskSupport.executeJob(TaskSupport.java:145)
    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at oracle.iam.scheduler.impl.quartz.QuartzJob.execute(QuartzJob.java:196)
    at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
    to org.quartz.simpl.SimpleThreadPool$ WorkerThread.run (SimpleThreadPool.java:529)

    ]]
    [2012 02-03 T 10: 31:40.402 + 01:00] [oim_server1] [ERROR] [[OIMCP.] A/d converters] [tid: OIMQuartzScheduler_Worker-5] [username: oiminternal] [ecid: 0000JKyzKbD5e_d5HfT4if1FAfz4000002, 0] [APP: IOM #11.1.1.3.0] = end Stack Trace =.
    [2012 02-03 T 10: 31:40.403 + 01:00] [oim_server1] [TRACE] [[OIMCP.] A/d converters] [tid: OIMQuartzScheduler_Worker-5] [username: oiminternal] [ecid: 0000JKyzKbD5e_d5HfT4if1FAfz4000002, 0] [SRC_CLASS: com.thortech.util.logging.Logger] [APP: IOM #11.1.1.3.0] [SRC_METHOD: debug] com.thortech.xl.schedule.tasks.ActiveDirectoryReconTask: processUserChange: COMPLETED



    [...]



    [0000JKyzKbD5e_d5HfT4if1FAfz4000002, 0] [SRC_CLASS: com.thortech.util.logging.Logger] [APP: IOM #11.1.1.3.0] [SRC_METHOD: debug] com.thortech.xl.integration.ActiveDirectory.tcADUtilLDAPController: searchResultPageEnum: cookie length: 0
    [2012 02-03 T 10: 31:40.412 + 01:00] [oim_server1] [ERROR] [[OIMCP.] A/d converters] [tid: OIMQuartzScheduler_Worker-5] [username: oiminternal] [ecid: 0000JKyzKbD5e_d5HfT4if1FAfz4000002, 0] [APP: IOM #11.1.1.3.0] =.
    [2012 02-03 T 10: 31:40.414 + 01:00] [oim_server1] [ERROR] [[OIMCP.] A/d converters] [tid: OIMQuartzScheduler_Worker-5] [username: oiminternal] [ecid: 0000JKyzKbD5e_d5HfT4if1FAfz4000002, 0] [APP: IOM #11.1.1.3.0] com.thortech.xl.integration.ActiveDirectory.tcADUtilLDAPController: searchResultPageEnum: null
    [2012 02-03 T 10: 31:40.415 + 01:00] [oim_server1] [ERROR] [[OIMCP.] A/d converters] [tid: OIMQuartzScheduler_Worker-5] [username: oiminternal] [ecid: 0000JKyzKbD5e_d5HfT4if1FAfz4000002, 0] [APP: IOM #11.1.1.3.0] = []

    ]]
    [2012 02-03 T 10: 31:40.416 + 01:00] [oim_server1] [ERROR] [[OIMCP.] A/d converters] [tid: OIMQuartzScheduler_Worker-5] [username: oiminternal] [ecid: 0000JKyzKbD5e_d5HfT4if1FAfz4000002, 0] [APP: IOM #11.1.1.3.0] = start a Stack Trace =.
    [2012 02-03 T 10: 31:40.418 + 01:00] [oim_server1] [ERROR] [[OIMCP.] A/d converters] [tid: OIMQuartzScheduler_Worker-5] [username: oiminternal] [ecid: 0000JKyzKbD5e_d5HfT4if1FAfz4000002, 0] [APP: IOM #11.1.1.3.0] com.thortech.xl.integration.ActiveDirectory.tcADUtilLDAPController: searchResultPageEnum
    [2012 02-03 T 10: 31:40.419 + 01:00] [oim_server1] [ERROR] [[OIMCP.] A/d converters] [tid: OIMQuartzScheduler_Worker-5] [username: oiminternal] [ecid: 0000JKyzKbD5e_d5HfT4if1FAfz4000002, 0] [APP: IOM #11.1.1.3.0]
    [2012 02-03 T 10: 31:40.420 + 01:00] [oim_server1] [ERROR] [[OIMCP.] A/d converters] [tid: OIMQuartzScheduler_Worker-5] [username: oiminternal] [ecid: 0000JKyzKbD5e_d5HfT4if1FAfz4000002, 0] [APP: IOM #11.1.1.3.0] Description: null
    [2012 02-03 T 10: 31:40.421 + 01:00] [oim_server1] [ERROR] [[OIMCP.] A/d converters] [tid: OIMQuartzScheduler_Worker-5] [username: oiminternal] [ecid: 0000JKyzKbD5e_d5HfT4if1FAfz4000002, 0] [APP: IOM #11.1.1.3.0] [[] java.lang.NullPointerException
    at com.thortech.xl.integration.ActiveDirectory.tcADUtilLDAPController.searchResultPageEnum (unknown Source)
    at com.thortech.xl.schedule.tasks.ActiveDirectoryReconTask.performReconciliation (unknown Source)
    at com.thortech.xl.schedule.tasks.ActiveDirectoryReconTask.execute (unknown Source)
    at com.thortech.xl.scheduler.tasks.SchedulerBaseTask.execute(SchedulerBaseTask.java:384)
    at oracle.iam.scheduler.vo.TaskSupport.executeJob(TaskSupport.java:145)
    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at oracle.iam.scheduler.impl.quartz.QuartzJob.execute(QuartzJob.java:196)
    at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
    to org.quartz.simpl.SimpleThreadPool$ WorkerThread.run (SimpleThreadPool.java:529)

    ]]
    [2012 02-03 T 10: 31:40.422 + 01:00] [oim_server1] [ERROR] [[OIMCP.] A/d converters] [tid: OIMQuartzScheduler_Worker-5] [username: oiminternal] [ecid: 0000JKyzKbD5e_d5HfT4if1FAfz4000002, 0] [APP: IOM #11.1.1.3.0] = end Stack Trace =.
    [2012 02-03 T 10: 31:40.424 + 01:00] [oim_server1] [TRACE] [[OIMCP.] A/d converters] [tid: OIMQuartzScheduler_Worker-5] [username: oiminternal] [ecid: 0000JKyzKbD5e_d5HfT4if1FAfz4000002, 0] [SRC_CLASS: com.thortech.util.logging.Logger] [APP: IOM #11.1.1.3.0] [SRC_METHOD: debug] com.thortech.xl.integration.ActiveDirectory.tcADUtilLDAPController: Disconnect: STARTED
    [2012 02-03 T 10: 31:40.426 + 01:00] [oim_server1] [TRACE] [[OIMCP.] A/d converters] [tid: OIMQuartzScheduler_Worker-5] [username: oiminternal] [ecid: 0000JKyzKbD5e_d5HfT4if1FAfz4000002, 0] [SRC_CLASS: com.thortech.util.logging.Logger] [APP: IOM #11.1.1.3.0] [SRC_METHOD: debug] com.thortech.xl.integration.ActiveDirectory.tcADUtilLDAPController: Disconnect: FINISHED


    [...]


    [2012 02-03 T 10: 31:40.432 + 01:00] [oim_server1] [NOTIFICATION] [[OIMCP.] A/d converters] [tid: OIMQuartzScheduler_Worker-5] [username: oiminternal] [ecid: 0000JKyzKbD5e_d5HfT4if1FAfz4000002, 0] [APP: IOM #11.1.1.3.0] com.thortech.xl.schedule.tasks.ActiveDirectoryReconTask: run: reconciliation of the end of Active Directory...
    [2012 02-03 T 10: 31:40.432 + 01:00] [oim_server1] [TRACE] [[OIMCP.] A/d converters] [tid: OIMQuartzScheduler_Worker-5] [username: oiminternal] [ecid: 0000JKyzKbD5e_d5HfT4if1FAfz4000002, 0] [SRC_CLASS: com.thortech.util.logging.Logger] [APP: IOM #11.1.1.3.0] [SRC_METHOD: debug] com.thortech.xl.schedule.tasks.ActiveDirectoryReconTask: run: FINISHED

    Thus, it is confirmed that incoming data for expiration of account won't (HH is not correct).

    Try below
    Update TargetDateFormat as yyyyMMddHHmmss.0Z (default) in Lookup.AD.Configuration

    Yet there is problem update date format as shown below from the sample data

    Microsoft ADAM 2003, value
    is stored in the format of the time. For
    example: 129069486000000000
    Microsoft ADAM 2008, value
    are stored in date format. For example:
    01/03/2010

    This is a required field. On
    Microsoft 2003 ADAM, you can enter
    0 while creating an account.

    If before work don't try below

    even for the expiry of the specific update directly on the ADAM server as 0 and try to reconcile if it works, we stood at the question

    -nayan

    Published by: Zaba Nayan on 8 February 2012 08:02

    Published by: Zaba Nayan on 8 February 2012 08:08

  • Problem when running recon research org AD scheduled task

    Hello

    I get errors thrown when you try to run the scheduled task recon AD org search.

    using IOM 9.1.0.1 with the last AD on JBoss connector.

    the error log-

    2009-10-21 16:00:01, 399 DEBUG http://OIMCP.ADCS com.thortech.xl.integration.ActiveDirectory.tcADUtilLDAPController: connectToAvailableAD: COMPLETED
    2009-10-21 16:00:01, 399 DEBUG http://OIMCP.ADCS com.thortech.xl.integration.ActiveDirectory.tcADUtilLDAPController: Disconnect: STARTED
    2009-10-21 16:00:01, 414 DEBUG http://OIMCP.ADCS com.thortech.xl.integration.ActiveDirectory.tcADUtilLDAPController: Disconnect: FINISHED
    2009-10-21 16:00:01, ERROR 430 STDERR Exception in thread "DefaultQuartzScheduler_Worker-7".
    2009-10-21 16:00:01, 461 STDERR ERROR java.lang.NoClassDefFoundError: com/Sun/jndi/ldap/ctl/PagedResultsControl
    2009-10-21 16:00:01, 461 ERROR STDERR-at com.thortech.xl.integration.ActiveDirectory.tcADUtilLDAPController.searchResultPageEnum (Unknown Source)
    2009-10-21 16:00:01, 461 ERROR STDERR-at com.thortech.xl.schedule.tasks.ADLookupReconTask.performReconciliation (Unknown Source)

    Can someone help me please?

    Thank you

    Hello

    Have placed the ldapbp.jar in the third folded directory of the OIM_Home?
    If not just add and add also in the class path and try it.

    concerning

  • Problem running AD organization search Recon scheduled task

    Hey all,.

    I get errors thrown when you try to run the scheduled task recon AD org research in JBoss.

    Execution of IOM 9.1.0.1 with the last AD connector.

    Here is the error that JBoss throws...

    2009-10-21 16:00:01, 399 DEBUG [OIMCP. A/d converters] com.thortech.xl.integration.ActiveDirectory.tcADUtilLDAPController: connectToAvailableAD: COMPLETED
    2009-10-21 16:00:01, 399 DEBUG [OIMCP. A/d converters] com.thortech.xl.integration.ActiveDirectory.tcADUtilLDAPController: Disconnect: STARTED
    2009-10-21 16:00:01, 414 DEBUG [OIMCP. A/d converters] com.thortech.xl.integration.ActiveDirectory.tcADUtilLDAPController: Disconnect: FINISHED
    2009-10-21 16:00:01, 430 ERROR [STDERR] Exception in thread "DefaultQuartzScheduler_Worker-7".
    2009-10-21 16:00:01, 461 ERROR [STDERR] java.lang.NoClassDefFoundError: com/Sun/jndi/ldap/ctl/PagedResultsControl
    2009-10-21 16:00:01, 461 ERROR [STDERR] at com.thortech.xl.integration.ActiveDirectory.tcADUtilLDAPController.searchResultPageEnum (unknown Source)
    2009-10-21 16:00:01, 461 ERROR [STDERR] at com.thortech.xl.schedule.tasks.ADLookupReconTask.performReconciliation (unknown Source)
    2009-10-21 16:00:01, 461 ERROR [STDERR] at com.thortech.xl.schedule.tasks.ADLookupReconTask.execute (unknown Source)
    2009-10-21 16:00:01, 461 ERROR [STDERR] at com.thortech.xl.scheduler.tasks.SchedulerBaseTask.run (unknown Source)
    2009-10-21 16:00:01, 477 ERROR [STDERR] at com.thortech.xl.scheduler.core.quartz.QuartzWrapper$ TaskExecutionAction.run (unknown Source)
    2009-10-21 16:00:01, 477 ERROR [STDERR] at Thor.API.Security.LoginHandler.jbossLoginSession.runAs (unknown Source)
    2009-10-21 16:00:01, 477 ERROR [STDERR] at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute (unknown Source)
    2009-10-21 16:00:01, 477 ERROR [STDERR] at org.quartz.core.JobRunShell.run(JobRunShell.java:203)
    2009-10-21 16:00:01, 493 ERROR [STDERR] at org.quartz.simpl.SimpleThreadPool$ WorkerThread.run (SimpleThreadPool.java:520)
    2009-10-21 16:00:01, 493 ERROR [STDERR] Caused by: java.lang.ClassNotFoundException: ADP ClassLoader load failure: com.sun.jndi.ldap.ctl.PagedResultsControl
    2009-10-21 16:00:01, 493 ERROR [STDERR] at com.thortech.xl.dataobj.tcADPClassLoader.findClass (unknown Source)
    2009-10-21 16:00:01, 493 ERROR [STDERR] at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
    2009-10-21 16:00:01, 508 ERROR [STDERR] at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
    2009-10-21 16:00:01, 508 ERROR [STDERR] at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
    2009-10-21 16:00:01, 508 ERROR [STDERR]... 9 more

    I think I have my AD correctly configured connector.
    My field is dc = test-IOM, dc = local

    Any help would be greatly appreciated.

    Thanks in advance.
    -Bryan

    You may need to add the ldapbp.jar in the class path. place it in the lib or lib ext directory IOM jdk.

    Hope this helps,
    Sam

  • Is there a way to access the start page of Thunderbird without disconnection and insert it again?

    I would like to be able to access the start page of Thunderbird at random times, without disconnecting and then insert it again.

    Is this possible?

    Under the GO menu is PAGE of STARTING PRINCIPAL.

    The shortcut is alt + home page.

  • My computer started to disconnect automatically after a period of time.

    My computer just start automatically disconnect after no activity during a short period of time.  How can I prevent the it disconnects.   I am running Windows 7.

    Hello

    Open windows control panel, open personalization, click on the link on the bottom right and in the next window, screen saver set time "Wait" to a more acceptable figure and Remove the tick in the box next to "in curriculum vitae, the logon screen.  Click on apply, then Ok to save the setting.

    Kind regards

    DP - K

  • problem starting after trouble disconnecting an external hard drive

    Starting system but touch panel (Mouse) doesn´t work. Shows a window with an error message "not properly disconnected hard drive '.

    Is the possibility of everything during the priming by press some special help keys?

    in the meantime a connected external HD and the message not correct disconneting about disappeared.

    But now she a new message appeared on a problem with finder. I have can´t open finder and I have therefore no change to start time machine or the hard drive service program.

    It would be best if had a DVD with an operating system.

    The question now is how to create a bootdisk from my iMac.

  • Define a VI to run when starting on the myRIO when programmed in scan mode

    Salvation of the forums,

    Hoping you can help me with this please. Of course there must be a simple way for me to do, but can't seem to find anything through research on the main site of NOR...

    I work with the platform myRIO and simply want a VI to run as soon as the myRIO is powered (no instruction of the user interface). I found the instructions on How to do it if the myRIO has been programmed using the FPGA and the host RT configuration but unfortunately the right click options are not available because my project/myRIO are set up using the analytical engine style mode (giving access to the range of myRIO etc.).

    Ideally I'd rather avoid having to recode the system using a low level of coding, including FPGA due the heavy compilation for each iteration of the code using real data (with simulated test on PC e/s would be faster, I know, but it is unlikely to show me bugs in my code for what I need).

    So in simple, could someone please point me in the right direction for setting a VI to run at start up/boot for the myRIO when it is configured and programmed using the scan engine?

    Thank you very much!

    It turns out, after all this (several hours trying to find missing options and research methods of how do!) this is because the Application Builder had been installed and as such has been activated, but NI License Manager was always waiting to finalize activation (activation running Assistant required).

    Seems to work now but at least! No doubt lost a lot of time with her, but it's a learning curve!

    So for someone who is struggling to find options to create a .rtexe file, make sure that your Builder Application is enabled!

  • BOM of MyRIO Starter kit, Kit and Kit car Mechatronics

    Here can someone let me know where I can get a list of parts/components included in the kits of myRIO for dish, Mechateonics and Embedded? Thanks in advance!

    Accessory Starter Kit:

    http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/211721

    Mechatronic Kit:

    http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/211722

    Embedded Systems Accessory Kit:

    http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/211723

  • When I start RCT3, I can hear the sound of the game, but the image disappears. It's almost as if the monitor is disconnected from the computer. This could be the cause?

    Original title: race Roller Coaster Tycoon 3

    When I start RCT3, I can hear the sound of the game, but the image disappears. It's almost as if the monitor is disconnected from the computer. This could be the cause?

    Hi Redbaron666,

    Have you checked if the game works the clean boot?

    I see that Rollercoaster Tycoon 3 is not compatible with Windows 7 which could be the cause of this problem:

    Windows 7 Compatibility Center

    Method 1: You can run the game in compatibility mode and then check

    Make older programs in this version of Windows

    http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

    Thanks and greetings

    Ajay K

    Microsoft Answers Support Engineer
    ***************************************************************************
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • We can handle groups of tabs in the tab tool bar, dragging and stacking style tabs Opera 12?

    The groups are an interesting alternative to the tab stacking Opera12 (manage a sort of Group of Opera from the toolbar of the tab drag / combined). It might be useful to combine the two, in keeping the Group window, but to also grouping and movement

  • Driver webcam cannot install using Win 7 64 bit on Satellite Pro T110 - 11 L

    Hello I'm trying to use the webcam came with the laptop, it's a Satellite Pro T110 - 11L. It is currently running Windows 7 64 bit and I tried to install the web camera for Windows 7 64-bit drivers and even the XP version which Toshiba site has on th

  • How to register ASa to H.A on firepower?

    Hello people! Anyone know how I can understand the SAA in H.A on firepower? I understand as a host, but when the first fails, the secondary has lost connection with the power of fire. Thank you Marcio

  • BlackBerry® Smartphones put E-mail in place

    I'm trying to set up email on my phone accounts.  I can go as far as the additional settings page where you enter the user name and the e-mail server.  After completing what I click Next, but rather if an icon of finishing the software goes back to t

  • HELP blackBerry Smartphones... transfer contacts

    Blackberry style 9670 phone. has just been cut. no power nothing. I got a replacement phone. How to transfer my contacts because the phone is dead. Incidentally, I have blackbery protect on the dead phone. How to recover information. phone is dead...