N Officejet Pro 8600: error message says printer malfunctions... really?

Similar Questions

• OfficeJet Pro 6230: Error Message: incompatible print heads

  The printer is not even a month and has worked perfectly, until last week when he simply stopped Mid-print page. There are no jams, no flashing lights, it just stopped printing. I turned it and turn it back on and that's when the ink lights began flashing. First there was black ink, which I changed with a new cartridge (even though I know that the configuration it was not empty). Then each colored ink lights began flashing. I replaced all four cartridges with the new HP ink and the Scan doctor says that the print heads are alternately missing, damaged or incompatible. The message passes whenever I check. I am at a loss and impossible even to contact someone to get this repaired thing (because it is still under warranty).

  None of the troubleshooting techniques worked. I had all the tried before they have been suggested, so I ended up contact HP and receiving a replacement printer. We'll see how it goes.

• OfficeJet Pro 8600 +: OfficeJet Pro 8600 + very slow to print

  We recently purchased a new MacBook.  From the beginning on this MacBook, our HP 8600 printer takes long time to start an extremetly to print.  Sometimes it prints ever.  The printer is set up wireless.  Sometimes the print area will say that is having problems connecting to the printer, but not always.

  This only happens on this MaxBook.  I have an iMac and a Windows laptop, both connect to the same wireless printer.  Both of these printing devices print jobs fairly quickly.

  I downloaded the new drivers.  Uninstalled and reinstalled the printer.  Restarted the printer and wireless access point.  Disabled iPV6.

  Don't know what else to try.

  Hi @JH99,

  Welcome to the HP Forums!

  I noticed that your HP Officejet pro 8600 is slow to print on a wireless connection, with your Mac. I'm happy to help you!

  Please, try the procedure described in this guide, "printer offline" or "printer not responding" Message (OS X)and let me know the results. Although the guide title does not match your question, I think that these steps will help.

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Thank you for posting!

• HP Officejet Pro 8600 Plus do not print hardcover

  I tried the solutions posted: 1) made sure the tray 2 is not installed. (2) printed 100 white pages of plain paper. (3) modified preference hardcover and paper media.  However, I always get out of paper message when you try to print on thick paper.

  This is a new printer. Help!

  Hi hubox,

  Welcome to the HP Forums!

  I understand that your HP Officejet pro 8600 more do not print card stock, and I'm happy to help with this problem!

  To get help, I'll need to know:

  • If you use Windows or operating system Mac and the version number. To find the exact version, visit this link. Whatsmyos.
  • If the printer is connected, USB, Ethernet, or wireless.
  • If the printer is capable of making copies of itself.
  • If the power cable plugged into a surge protector, or directly on a wall plug. Questions when it is connected to an uninterruptible power supply/Strip/surge protector power. This is true for printers and ink jet.
  • The size of the stock card.
  • The weight of the cardboard.

  In the meantime, please take a look through this paper guide. ' A ' Out of paper ' or 'Choose the motor at a standstill' message and the printer not picking up or feeding of the paper in the main tray.

  I hope to hear from you and thank you for posting!

• The HP OfficeJet Pro 8600 does support e-print? I am running Win 7 Pro 64-bit

  Can you please tell me: the HP OfficeJet Pro 8600 does support e-print?  I can't find or generate or figure out how to create an e-mail address for this printer.  Thank you.

  Hello BoPeepLamb,

  8600 printer OfficeJet does support ePrint. You can access the e-mail address of printers by allowing Web Services to the main display on the printer. The icon is located on the top left corner of the screen and looks like the sheet of paper with circles behind it. Before you can enable Web Services, you must ensure that you have a valid internet connection first.

  Once you have enabled Web Services, you should have a print sheet mobile printing with a printer code and the link to http://www.eprintcenter.com where you can create an account and customize your e-mail address printers.

  If you have any other questions do not hesitate to reply to this message and I'll try to find an answer for you.

• OfficeJet Pro 8600: Unable to connect printer OfficeJet after update Win10

  I had my Officejet pro 8600 perfectly connected wireless to Win 7 for several years.

  After the update to Win10, I am unable to connect to the printer. The printer status shows that driver is not available.

  I checked Win10 and Adobe by other suggestions from the forum. both are up to date with the latest version.

  I uninstalled and reinstalled the printer Win10 driver and the download driver HP. None succeeded.

  Run the convenience store Win10 shows that the print spooler cannot be started. He is set to start automatically, but is currently stopped. I can not start it manually, and it does not start after a reboot.

  The fixed! I found the following information on a page of the Microsoft Help forum:

  Thanks to http://www.registryrecycler.com/blog/2013/12/how-to-fix-printing-error-in-windows-8-1/ for the fix.

  Apparently, the Windows 8.1 updates had the same problem.

  Editing the registry is necessary. Make sure that you have a backup of the registry before making changes.

  • Press the keys Windows + R on your keyboard to open the run box.
  • Type regedit in the box run and press Enter to open the registry editor.
  • Confirm the UAC message by clicking on the Yes button.
  • In the left pane of the registry editor, expand HKEY_LOCAL_MACHINE to find the key below.
  • SYSTEM\CurrentControlSet\Services\Spooler.
  • While the spooler key is highlighted, you can navigate the right pane to assign the value DependOnService.
  • Double-click the string value to change the data.
  • The data in the value field should contain the text saying RPCSS, followed by http in the next line.
  • Select and delete the letters http and click OK to save your changes.
  • Leave the part of RPCSS to the value data as it is written.
  • Close Registry of Windows and restart your computer.

• HP Officejet Pro 8600: False messages on HP Support Assistant for Officejet 8600

  On the HP Support Assistant, I get the message:

  Printers HP Officejet Pro 8600 - 'Transport Jam' message and

  ' Printers HP Officejet Pro 8600 - a ' Out of paper ' or "Pick motor stalled" displays

  but the two messages are false - I have no "carriage jam" or "paper" problems.

  The messages showed only upward after the installation of Win 10 and not before with Win 8.1 installed.

  Hey @cbrodersen,

  Welcome to the HP forums! I hope you enjoy your stay here.

  I understand you see false error messages in the help Wizard on your PC of Windows 10. I can help you with that.

  To address this question of what we will do is to uninstall your printer software currently installed. Once that was removed, you can download and install the most recent drivers by clicking on this link.

  This should prevent the support Assistant to provide you with more false error messages. If you need anything else please let me know.

  Thank you for choosing HP and have a great day!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.

  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

• 8600 Officejet Pro 8600 no more stopped printing

  I have an Officejet Pro 8600 Plus 8600 that I installed on my home wireless router.  I use a Dell laptop with the Windows 7 operating system.  I have installed the printer without a problem when I bought it a month ago.  A few days ago, I tried to print a page before going to my work and could not operate.  I don't think much since I'm in a hurry, but later when I returned from work, that my printer was still not working.  I unplugged the printer and close the router and the laptop.  I rebooted everything and always the printer would not work.  No test page or anything.  I uninstalled the drivers and reinstalled and the Test of Fax report prints fine, but when I tried to run the printer test page, I got the error message "Unable to communicate with the printer."  I have worked on this for two days now and nothing I will work.  I used the doctor Print and evrything goes, but still no luck.  Help please?

  WEEL I finally thought to it.  My McAfee did an update that wiped out my ability to print.  I changed the settings for McAfee and I was able to print again.  Thanks for your help!

• HP Officejet Pro 8600 Plus: Scanner/Fax, printing of two black lines on documents

  When you use the document for scan, copy, fax feeder, etc. the document always ends with two vertical black lines in the middle of the page.  I read a few other posts similar to this and tried all the advice, and nothing seems to have worked.  So far I've tried: cleaning the machine reset, turn it off for a period of time and again, disconnect it from the power supply for five minutes and by him plugging plug (which were the advice given in other posts).  Thanks in advance!

  Hi @JHurkett.

  Welcome to the Forums of HP's Support. I understand that you found lines in the scans and faxes of the ADF. I would like to help.

  If please examine this message and try the steps that you have not already done so. HP Officejet Pro 8600 e-all-in-one and Photosmart 7520 e - all-in - One Printer Series - band vertical, lines, or streaks in the Copies, faxes, or scans

  If you have any questions, or if this does not resolve the problem, let me know.
  If it solves your problem, please click acceptable Solution. This will allow other people with the same problem the solution easily. If you want to say thank you, feel free to click on the laurels.

• N911a HP Officejet Pro 8600 error scanner cannot communicate with the computer.

  Original title: is anyone has the sweep of HP Officejet Pro 8600 n911a problems when you use Windows 7 Pro?

  Just bought this laptop of HP Pavilion dv6-7138us, and had the updated operating system upgraded to Windows 7 Pro, directed by Office Depot until I take possession.  The all-in-one HP Officejet Pro 8600 n911a (bought a few months ago) will be analyzed to this laptop.  I can't access "managing the scan of the computer."  When I try to open the scanner of the icon, the message begins with "scanner cannot communicate with the computer."  I was on the HP support forum, tried to uninstall and reinstall the driver, even tried to download the driver on the net, you run printing HP & scan doctor, tried all disconnect them reconnect restart options, all without success.  The functions of printer normally with this laptop and the printer function scanner AND correctly on other two laptops running Windows XP Pro.  Which makes me suspect that this is a problem Windows 7 Pro.  Could this be just?

  My apologies if this isn't the right forum for my problem.  Please redirect me if this is the case.

  Any real help will be GREATLY appreciated.  It's so frustrating!

  Thank you.

  Hello

  1. you have any security program installed on the computer?

  2 did you a recent software or changes to the material on the computer?

  Method 1:

  I suggest you to disable any anti-virus program and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:

  You can also run the printer Troubleshooter and check if it helps.

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 3:

  I also suggest to try to run the System File Checker scan on the computer. The scan will replace all the Windows files corrupted with new ones.

  Click on the link mentioned below for further guidance on the scanning of the file system Checker

  http://support.Microsoft.com/kb/929833

  See also:

  "The computer cannot communicate with the scanning device" Error message in Windows Vista

  http://h10025.www1.HP.com/ewfrf/wc/document?CC=UK&DLC=NL&DocName=c00852756&LC=en

  I can't scan in Windows using the HP software

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02661093&tmp_task=solveCategory&cc=us&DLC=en&LC=en&product=4323659

  Hope this helps and let us know if you need more assistance. We will be happy to help.

• OfficeJet Pro 8600 Premium: HP OfficeJet Pro 8600 Premium does not print Windows with Word 2016 10 envelopes

  After that I have upgraded to Windows 10 and Word 2016, envelope and label printing feature would no longer work on all-in-one printer, HP OfficeJet Pro 8600 Premium.  Please provide any possible solution.

  Hi @dshirley22,

  Thanks for the response back.

  I would at this point uninstall all previously installed printer software. If you need assistance, here is a document that can help - uninstalling the software of the printer (Windows).

  Once the software is uninstalled, use the HP printer installation wizard to help install the software. This tool will search and find the version of the drivers and the printer software up-to-date.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• HP Officejet Pro 8600 continues to read printer off line even if hard wired - help!

  I'm unable to print on my HP Officejet Pro 8600.  It will not print wireless so I wired with an ethernet cable.  Printer says offline.  What to do next?  Help, please!

  Finally got it working today.  My son-in-law the fixed.  He said, he said offline, because the network was not see an IP address from the wireless printer.  Basically, he opened the printer HP Officejet Pro 8600 dialog box and clicked on add a printer and re-installed.  Thanks a lot for your help.  I hope this can help someone else in the future.

• HP Officejet Pro 8600 Plus: problem of print head

  Have had this printer for a couple of years without any problems.  All of a sudden getting the message: printhead appears to be missing, not detected, or incorrectly installed. Lived all the recommended diagnostic checks but still a problem. I got it working the first time but then after a few days print message pops up again. The message won't let me come back to the homescreen on the printer.  I took it by a realignment and the printer prints a test page. If the printhead has been the problem, then I thought that he would not be able to print a test page. Any suggestions?

  Thanks for your support Gemini02.  As well as through the HP recommended diagnostic tests I blush as the printhead to hot water, but still the same message. I also downloaded and reloaded the drivers, but to no avail.  The machine is 3.5 years old and so I came to the conclusion, it exceeded its use by date.  The cost of a new print head is $ 70 while the printer, HP Officejet pro 8600, is now manufactured and was replaced by the Officejet pro 8620 which sold $275 by HP.  HP said that because of the age of the printer, there is no guarantee that a new printhead will not solve the problem.  I then bit the bullet and ordered a new printer.

• HP Officejet Pro 8600 N911a will not print from Windows 8.1

  I have a HP printer Officejet Pro 8600 N911a that returns the 72234 error code everytime I try to print a document from my Windows 8.1 desktop (HP 1520 t).

  Also, there is a single instance of error code 74899

  The same document prints fine on my Windows 7 Desktop and my Windows 7 Netbook.

  Firmware of the printer is: CLP1CN1416AR

  Firmware from the Support Page of the printer appears as: CLP1CN1322CR (2014-07-18)

  What should I do next to be able to print from my computer Windows 8.1.

  Steve

  Note: This is the first issue I had with this printer that was bought a year ago.

  Hello Steve, I hope you're well

  Thanks for getting back to me with your info!

  Yes, I would first of all, running the wizard of wireless configuration from the front panel of the printer (installation program, Menu, Assistant wireless network), make sure that the printer is connected to your network, then proceed to uninstall the printer, restart the PC and reinstall them both back on your computer.

  I hope that this is the solution!

  Have a great Monday!

• HP Officejet Pro 8600 Plus: software the Printer Wizard does nothing and eats CPU

  Hello

  I currently have a problem with the HP printer Assistant software. I use a HP Officejet Pro 8600. Well I uninstalled and reinstalled several times, redownloaded the latest version of the software from the HP site, tried with a wireless connection and a USB connection, but still have this same problem.

  The problem is when I open the printer to the printer Assistant software (scan, definition of printing preferences, etc.) nothing loads and what I noticed is that in the Task Manager, the program is constantly, nonstop to duplicate in the Task Manager and eventually slow down the computer because of the high use of the processor of these duplicates. I can't stop these processes in time compared to the amount of tasks in doubles at this very moment, and the only way to stop it is to restart the computer. I had this problem with Windows 8.1 and so I've upgraded to Windows 10 but exactly the same problem occurs. If I wait long if I get an error (0xc0000142) telling me that I can not load the Printer Wizard, but the process will still duplicate.

  I tried using the printer with other computers, but they do not have a problem by launching the wizard from the printer. I wonder what is happening and why is the Printer Wizard launch multiple neverending himself as tasks on the Task Manager?

  Add to that, printing works fine, it is train to launch the Printing Assistant software that is causing the problem.

  Hello @jellyjr,