Name of the device changed but always communicate with the same device
Hello!
I have two 6501 NIDAQs that I use in two different test of PRINTED circuit board equipment. I gave them names 'Dev1' and 'Dev2. For some reason they cannot not be plugged into the same computer at the same time (USB), given that my TestStand/LabView application does not be able to tell one from the other.
If I run my first try using Dev1 and try to run the second test, uses now Dev2, my DAQAssistant - although I see that Dev2 is sent to its "DeviceName" - still communicates with Dev1.
Now, if I unplug them and then run one of the tests, it will break because of the "task without name. If I then go to NI Max and simply click on "create task...". "and cancel it, it will work until I have another plug in and unplug my only current. Now, I'll have to repeat step 'create task... '. "to get my new device work properly.
Is there anyone who has had a similar problem and have been able to solve it?
Hello
Thanks for the help.
It turns out that the problem was the option of loading TestStand. If I choose to unload every step after the execution of the sequence file, the problem is resolved.
Concerning
Kristian
Tags: NI Hardware
Similar Questions
-
I have a creative Member Cloud (one year). As you know, when I download/install software of Creative delegating, askUsername and password. I typed the name of user and password, but it was rejected. Is the user name is the same as Adobe ID? Please advise me.
Hello
He would ask your Machine user name and password.
Kind regards
Sheena
-
How can I create 2 albums in the same name and the same artist
The guy is anyway to make the 2 albums in the same name for the same artist? If there is no way so please someone tell me how can I suggest updating to iTunes
Faisal,
If they have the same artist and eponymous album, iTunes will think they are from the same album. The best way would be to change the title for the second version, for example 'Loveless' and 'Loveless 2.' Or you could put parts in separate lists.
If you don't want to make a suggestion to Apple, here's the link:
http://www.Apple.com/feedback/itunesapp.html
"In the dropdown for" Type of comment ", select"Enhancement request.""
-
When you use the batch, record with the same file name in the same folder.
I therefore about 500 pictures that needs to be cropped. I created the cropaction and added a "backup" function and close in action, because I want the photos to be saved with the same file name in the same folder...
Now I want that it take its course. But no, I have to press ok to confirm the backup on each photo.
Someone knows how to fix this?
BR
Robert
I solved it.
I forgot to check the box "override save under ' :)
-
The file name looks like has changed, but not really
I have several video files, I created and then changed the name of. The name seems to change in the finder, BUT when I open in VLC or drop it into itunes it shows the original name.
There must be another place, the name is stored (in the file?)
Any help?
There is a title within the video file. When creating, this is the same as the name of the file, but change the name of the file will not change anything inside the file.
To change the title, right click on the file in iTunes, select "Get Info", change the title in the Details tab, and then click OK.
-
I connect a HP all in one Photosmart 5510 to an ATT Uverse wireless network. It says printer is connected and printer tests are all good.., but still when I try to print, I get an error message saying that cannot communicate with the printer, make sure that it is attached to the network?
I restarted services, restarted..., still the same case. It says its connected, but do not connect or print. Very frustrating...
What operating system?
If Windows, download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&jumpid=ex_r4155/en/hho/ipg/forum/network_diag/
What did he say?
-
Can make us transfer from subinv1 to 2, but target name is the same
Hello
Can pass us transfer xx.xxx to xx.xxx FG Locator Store Locator.
Locator control is dynamic. The Locator is already defined in the stores and not defined in FG.
the two sub - inv are entered on dynamics. The user is put in error when he tries to order from store to the same Locator Fg.
Y at - it any note metalink accessible to the general public for this issue
Concerning
VKPK
Hello
As directed by your sentence above. It seems locators are already created with the same organization of different stocks. because the system does not create the locator in the same organization of inventory.
Standard is locator name must be unique.
May be useful for you. https://forums.Oracle.com/message/4496230
Kind regards
Hinda
-
Windows Vista machines can see XP machines but cannot communicate with them.
original title: VISTA machine can see XP machines in local network, cannot connect
I have a 3 computer home network that has worked very well for many years, but it is usually just used by 3 machines to access the Internet. Very rarely a computer does enter a file out of one of the other machines, but this feature has certainly worked in the past.
Machine 1: Desktop/VISTA/setting up a connection to the router
Machine 2: Desktop/XP/setting up a connection to the router
Machine 3: Computer connection laptop/XP/wireless to the router
All the machines, automatic update of Windows and all the computers are running Norton Security Suite, which is also updated automatically. Norton Security Suite is a relatively new introduction to the network.
2 XP machines see that all 3 computers in the network each has access to the other. 2 XP machines can not "reach" the VISTA ("the network path was not found") which could be correct, because machine that I never shared something on this machine, although sharing file and printer sharing * are * on.
On the VISTA machine click on network and sharing Center and then see the full plan shows 3 machines in the group. But, then clicking on view computers and devices results in the network window, which shows that the VISTA as a computer machine and a media device. No XP computer to connect to.
The VISTA machine can ping machines (Machine 2 ping or ping Machine 3) XP, but XP machines can't ping the VISTA. In fact, it's quite strange; If I 'ping Machine 1' of one of the machines XP ping command reports "Pinging Machine 1. (Name of working group) "[208.68.143.50] with 32 bytes of data", then he received 4 requests, responses has expired. I have no idea where this name - the name of my PC added on behalf of the Working Group - and the IP address belongs to a computer somewhere in Massachusetts! (I'm in California).
Rattling of the VISTA machine using its IP internal, as reported by the router just translates into 4 requests, responses has expired.
I worked on it for hours now, after trying all of the 'standard' patches with no improvement. Given the Windows error message when one of the XP machines trying to access the VISTA - "the path not found network" machine as opposed to they access denied response - and the ping odd response when you use the name of the machine, I have the feeling that the things in the list of standard control is not the problem.
Any thoughts?
Tom Young
I finally reduced to the Norton Security Suite firewall. Don't think that was the issue that the 2 XP machines are also running Norton Security Suite and is working very well. Penetrating machines XP 2 'Total confidence' confidence level - which doesn't seem to be necessary according to the news 'aid' to Norton that I read over and over again - cured the problem.
Tom Young
-
Cisco ipsec Vpn connects but cannot communicate with lan
I have a version of cisco 1921 15.2 (4) M3 I install vpn ipsec and may have customers to connect but cannot ping anything inside. A glimpse of what could be wrong with my config would be greatly appreciated. I posted the configuration as well as running a few outings of ipsec. I also tried with multiple operating systems using cisco vpn client and shrewsoft. I am able to connect to the other VPN ipsec running 1921 both of these computers by using a client.
Thanks for any assistance
SH run
!
AAA new-model
!
!
AAA authentication login radius_auth local radius group
connection of AAA VPN_AUTHEN group local RADIUS authentication
AAA authorization network_vpn_author LAN
!
!
!
!
!
AAA - the id of the joint session
clock timezone PST - 8 0
clock to summer time recurring PST
!
no ip source route
decline of the IP options
IP cef
!
!
!
!
!
!
no ip bootp Server
no ip domain search
domain IP XXX.local
inspect the high IP 3000 max-incomplete
inspect the low IP 2800 max-incomplete
IP inspect a low minute 2800
IP inspect a high minute 3000
inspect the IP icmp SDM_LOW name
inspect the IP name SDM_LOW esmtp
inspect the tcp IP SDM_LOW name
inspect the IP udp SDM_LOW name
IP inspect name SDM_LOW ssh
No ipv6 cef
!
Authenticated MultiLink bundle-name Panel
!
!
Crypto pki trustpoint TP-self-signed-2909270577
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 2909270577
revocation checking no
rsakeypair TP-self-signed-2909270577
!
!
TP-self-signed-2909270577 crypto pki certificate chain
certificate self-signed 01
license udi pid CISCO1921/K9 sn FTX1715818R
!
!
Archives
The config log
Enable logging
size of logging 1000
notify the contenttype in clear syslog
the ADMIN_HOSTS object-group network
71.X.X.X 71.X.X.X range
!
name of user name1 secret privilege 15 4 XXXXXXX!
redundancy
!
!
!
!
!
property intellectual ssh time 60
property intellectual ssh authentication-2 retries
property intellectual ssh event logging
property intellectual ssh version 2
!
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
!
ISAKMP crypto client configuration group roaming_vpn
key XXXXX
DNS 192.168.10.10 10.1.1.1
XXX.local field
pool VPN_POOL_1
ACL client_vpn_traffic
netmask 255.255.255.0
!
!
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
tunnel mode
!
!
!
crypto dynamic-map VPN_DYNMAP_1 1
Set the security association idle time 1800
game of transformation-ESP-3DES-SHA
market arriere-route
!
!
list of authentication of card crypto SDM_CMAP_1 client VPN_AUTHEN
map SDM_CMAP_1 isakmp authorization list network_vpn_author crypto
client configuration address map SDM_CMAP_1 crypto answer
map SDM_CMAP_1 65535-isakmp dynamic VPN_DYNMAP_1 ipsec crypto
!
!
!
!
!
the Embedded-Service-Engine0/0 interface
no ip address
Shutdown
!
interface GigabitEthernet0/0
IP 76.W.E.R 255.255.255.248
IP access-group ATT_Outside_In in
no ip redirection
no ip unreachable
no ip proxy-arp
NAT outside IP
inspect the SDM_LOW over IP
IP virtual-reassembly in
load-interval 30
automatic duplex
automatic speed
No cdp enable
No mop enabled
map SDM_CMAP_1 crypto
!
interface GigabitEthernet0/1
no ip address
load-interval 30
automatic duplex
automatic speed
!
interface GigabitEthernet0/1.10
encapsulation dot1Q 1 native
IP 192.168.10.1 255.255.255.0
no ip redirection
no ip unreachable
no ip proxy-arp
property intellectual accounting-access violations
IP nat inside
IP virtual-reassembly in
!
interface GigabitEthernet0/1.100
encapsulation dot1Q 100
10.1.1.254 IP address 255.255.255.0
no ip redirection
no ip unreachable
no ip proxy-arp
IP nat inside
IP virtual-reassembly in
!
interface GigabitEthernet0/1,200
encapsulation dot1Q 200
IP 10.1.2.254 255.255.255.0
no ip redirection
no ip unreachable
no ip proxy-arp
IP nat inside
IP virtual-reassembly in
IP tcp adjust-mss 1452
!
local IP VPN_POOL_1 192.168.168.193 pool 192.168.168.254
IP forward-Protocol ND
!
IP http server
IP http authentication aaa-authentication of connection ADMIN_AUTHEN
IP http secure server
IP http timeout policy slowed down 60 life 86400 request 10000
!
IP nat inside source map route ATT_NAT_LIST interface GigabitEthernet0/0 overload
IP nat inside source static tcp 192.168.10.10 25 expandable 25 76.W.E.R
IP nat inside source static tcp 192.168.10.10 80 76.W.E.R 80 extensible
IP nat inside source static tcp 192.168.10.10 76.W.E.R expandable 443 443
IP nat inside source static tcp 192.168.10.10 76.W.E.R expandable 987 987
IP route 0.0.0.0 0.0.0.0 76.W.E.F
!
ATT_Outside_In extended IP access list
permit tcp object-group ADMIN_HOSTS any eq 22
allow any host 76.W.E.R eq www tcp
allow any host 76.W.E.R eq 443 tcp
allow 987 tcp any host 76.W.E.R eq
allow any host 76.W.E.R eq tcp smtp
permit any any icmp echo response
allow icmp a whole
allow udp any any eq isakmp
allow an esp
allow a whole ahp
permit any any eq non500-isakmp udp
deny ip 10.0.0.0 0.255.255.255 everything
deny ip 172.16.0.0 0.15.255.255 all
deny ip 192.168.0.0 0.0.255.255 everything
deny ip 127.0.0.0 0.255.255.255 everything
refuse the ip 255.255.255.255 host everything
refuse the host ip 0.0.0.0 everything
NAT_LIST extended IP access list
IP 10.1.0.0 allow 0.0.255.255 everything
permit ip 192.168.10.0 0.0.0.255 any
deny ip 192.168.10.0 0.0.0.255 192.168.168.192 0.0.0.63
refuse the 10.1.1.0 ip 0.0.0.255 192.168.168.192 0.0.0.63
deny ip 10.1.2.0 0.0.0.255 192.168.168.192 0.0.0.63
client_vpn_traffic extended IP access list
permit ip 192.168.10.0 0.0.0.255 192.168.168.192 0.0.0.63
ip licensing 10.1.1.0 0.0.0.255 192.168.168.192 0.0.0.63
IP 10.1.2.0 allow 0.0.0.255 10.1.1.0 0.0.0.255
!
radius of the IP source-interface GigabitEthernet0/1.10
Logging trap errors
logging source hostname id
logging source-interface GigabitEthernet0/1.10
!
ATT_NAT_LIST allowed 20 route map
corresponds to the IP NAT_LIST
is the interface GigabitEthernet0/0
!
!
SNMP-server community [email protected] / * /! s RO
Server enable SNMP traps snmp authentication linkdown, linkup warmstart cold start
Server enable SNMP traps vrrp
Server SNMP enable transceiver traps all the
Server enable SNMP traps ds1
Enable SNMP-Server intercepts the message-send-call failed remote server failure
Enable SNMP-Server intercepts ATS
Server enable SNMP traps eigrp
Server enable SNMP traps ospf-change of State
Enable SNMP-Server intercepts ospf errors
SNMP Server enable ospf retransmit traps
Server enable SNMP traps ospf lsa
Server enable SNMP traps ospf nssa-trans-changes state cisco-change specific
SNMP server activate interface specific cisco-ospf traps shamlink state change
SNMP Server enable neighbor traps cisco-specific ospf to the State shamlink change
Enable SNMP-Server intercepts specific to cisco ospf errors
SNMP server activate specific cisco ospf retransmit traps
Server enable SNMP traps ospf cisco specific lsa
SNMP server activate license traps
Server enable SNMP traps envmon
traps to enable SNMP-Server ethernet cfm cc mep-top low-mep Dispatcher loop config
Enable SNMP-Server intercepts ethernet cfm overlap missing mep mep-unknown service-up
Server enable SNMP traps auth framework sec-violation
Server enable SNMP traps c3g
entity-sensor threshold traps SNMP-server enable
Server enable SNMP traps adslline
Server enable SNMP traps vdsl2line
Server enable SNMP traps icsudsu
Server enable SNMP traps ISDN call-information
Server enable SNMP traps ISDN layer2
Server enable SNMP traps ISDN chan-not-available
Server enable SNMP traps ISDN ietf
Server enable SNMP traps ds0-busyout
Server enable SNMP traps ds1-loopback
SNMP-Server enable traps energywise
Server enable SNMP traps vstack
SNMP traps enable mac-notification server
Server enable SNMP traps bgp cbgp2
Enable SNMP-Server intercepts isis
Server enable SNMP traps ospfv3-change of State
Enable SNMP-Server intercepts ospfv3 errors
Server enable SNMP traps aaa_server
Server enable SNMP traps atm subif
Server enable SNMP traps cef resources-failure-change of State peer peer-fib-state-change inconsistency
Server enable SNMP traps memory bufferpeak
Server enable SNMP traps cnpd
Server enable SNMP traps config-copy
config SNMP-server enable traps
Server enable SNMP traps config-ctid
entity of traps activate SNMP Server
Server enable SNMP traps fru-ctrl
SNMP traps-policy resources enable server
Server SNMP enable traps-Manager of event
Server enable SNMP traps frames multi-links bundle-incompatibility
SNMP traps-frame relay enable server
Server enable SNMP traps subif frame relay
Server enable SNMP traps hsrp
Server enable SNMP traps ipmulticast
Server enable SNMP traps msdp
Server enable SNMP traps mvpn
Server enable SNMP traps PNDH nhs
Server enable SNMP traps PNDH nhc
Server enable SNMP traps PNDH PSN
Server enable SNMP traps PNDH exceeded quota
Server enable SNMP traps pim neighbor-rp-mapping-change invalid-pim-message of change
Server enable SNMP traps pppoe
Enable SNMP-server holds the CPU threshold
SNMP Server enable rsvp traps
Server enable SNMP traps syslog
Server enable SNMP traps l2tun session
Server enable SNMP traps l2tun pseudowire status
Server enable SNMP traps vtp
Enable SNMP-Server intercepts waas
Server enable SNMP traps ipsla
Server enable SNMP traps bfd
Server enable SNMP traps gdoi gm-early-registration
Server enable SNMP traps gdoi full-save-gm
Server enable SNMP traps gdoi gm-re-register
Server enable SNMP traps gdoi gm - generate a new key-rcvd
Server enable SNMP traps gdoi gm - generate a new key-fail
Server enable SNMP traps gdoi ks - generate a new key-pushed
Enable SNMP traps gdoi gm-incomplete-cfg Server
Enable SNMP-Server intercepts gdoi ks-No.-rsa-keys
Server enable SNMP traps gdoi ks-new-registration
Server enable SNMP traps gdoi ks-reg-complete
Enable SNMP-Server Firewall state of traps
SNMP-Server enable traps ike policy add
Enable SNMP-Server intercepts removal of ike policy
Enable SNMP-Server intercepts start ike tunnel
Enable SNMP-Server intercepts stop ike tunnel
SNMP server activate ipsec cryptomap add traps
SNMP server activate ipsec cryptomap remove traps
SNMP server activate ipsec cryptomap attach traps
SNMP server activate ipsec cryptomap detach traps
Server SNMP traps enable ipsec tunnel beginning
SNMP-Server enable traps stop ipsec tunnel
Enable SNMP-server holds too many associations of ipsec security
Enable SNMP-Server intercepts alarm ethernet cfm
Enable SNMP-Server intercepts rf
Server enable SNMP traps vrfmib vrf - up low-vrf vnet-trunk-up low-trunk-vnet
Server RADIUS dead-criteria life 2
RADIUS-server host 192.168.10.10
Server RADIUS 2 timeout
Server RADIUS XXXXXXX key
!
!
!
control plan
!
!Line con 0
privilege level 15
connection of authentication radius_auth
line to 0
line 2
no activation-character
No exec
preferred no transport
transport of entry all
transport output pad rlogin lapb - your MOP v120 udptn ssh telnet
StopBits 1
line vty 0 4
privilege level 15
connection of authentication radius_auth
entry ssh transport
line vty 5 15
privilege level 15
connection of authentication radius_auth
entry ssh transport
!
Scheduler allocate 20000 1000
NTP-Calendar Update
Server NTP 192.168.10.10
NTP 64.250.229.100 Server
!
endRouter ipsec crypto #sh her
Interface: GigabitEthernet0/0
Tag crypto map: SDM_CMAP_1, local addr 76.W.E.Rprotégé of the vrf: (none)
local ident (addr, mask, prot, port): (0.0.0.0/0.0.0.0/0/0)
Remote ident (addr, mask, prot, port): (192.168.168.213/255.255.255.255/0/0)
current_peer 75.X.X.X port 2642
LICENCE, flags is {}
#pkts program: 1953, #pkts encrypt: 1953, #pkts digest: 1953
#pkts decaps: 1963, #pkts decrypt: 1963, #pkts check: 1963
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, #pkts compr. has failed: 0
#pkts not unpacked: 0, #pkts decompress failed: 0
Errors #send 0, #recv 0 errorslocal crypto endpt. : 76.W.E.R, remote Start crypto. : 75.X.X.X
Path mtu 1500, mtu 1500 ip, ip mtu IDB GigabitEthernet0/0
current outbound SPI: 0x5D423270 (1564619376)
PFS (Y/N): N, Diffie-Hellman group: noSAS of the esp on arrival:
SPI: 0x2A5177DD (709982173)
transform: esp-3des esp-sha-hmac.
running parameters = {Tunnel UDP-program}
Conn ID: 2115, flow_id: VPN:115 on board, sibling_flags 80000040, crypto card: SDM_CMAP_1
calendar of his: service life remaining (k/s) key: (4301748/2809)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVE (ACTIVE)the arrival ah sas:
SAS of the CFP on arrival:
outgoing esp sas:
SPI: 0x5D423270 (1564619376)
transform: esp-3des esp-sha-hmac.
running parameters = {Tunnel UDP-program}
Conn ID: 2116, flow_id: VPN:116 on board, sibling_flags 80000040, crypto card: SDM_CMAP_1
calendar of his: service life remaining (k/s) key: (4301637/2809)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVE (ACTIVE)outgoing ah sas:
outgoing CFP sas:
Routing crypto isakmp #sh its
IPv4 Crypto ISAKMP Security Association
DST CBC conn-State id
76.W.E.R 75.X.X.X QM_IDLE 1055 ACTIVEIPv6 Crypto ISAKMP Security Association
In your acl, nat, you will need to refuse your VPN traffic before you allow the subnet at all. Just put all the declarations of refusal before the declarations of licence.
Sent by Cisco Support technique iPhone App
-
Two different user names for the same account!
We bought my son a laptop and have set up a user account for him which is a standard user account and an administrator account to monitor and adjust security settings. However, our administrator account on the configuration page and the login screen is called MumandDad (which is what we want!) but when you go into Windows Live or the list of records or other areas where the username is the user name is Joseph. User account from my son named Joseph on connect to the Setup page and the page, but once again under folders etc. it is called Joseph2 - what should I do so that all folders/accounts read the same as the log in / page of the control panel?
Joseph2 is not an account name - is the name of the profile folder. If the name of the profile folder generally conform with the name of the account, there is sometimes a difference. There is nothing to worry about - just leave it as it is. Change it and can cause serious problems.
-
2 files exactly of same name in the same folder.
I have encoutered something strange in windows 7. I have 2 files with exactly the same name, and the files are also in the same folder. When you open one of them and saving them without warning are given this file already exists. Cup and last file to another location and copy of return, no warning is given of the file already exists also. Anyone know how this is possible.
Library...
Right click on the first file .ppt > Properties > check what's next to place:
Do the same for the second file. Because the location is the same?Probably not... Library is not a folder, it's something different. It shows you file stored in any location specified in the settings of the library. In the left pane you can right-click Documents in libraries > properties > and you will notice that you have listed several locations. Two 'identical' files may appear in the library, but they have a different location on your hard drive.
-
I have two files of the same name in the same directory. If it can happen?
I've attached a screenshot of this. This isn't a photoshop, I always have that. There are two folders named my videos in the same directory T. However when I look through the window run, typing T:\, it showed my videos and videos such as fall down in this directory...
One of the record is fair 'videos' but configured (in desktop.ini) appears as "my videos."
-
Is it possible to link them together for the PDF will automatically fill in the excel file? Also is there a way to fill in a field in the PDF with a combination of two fields in the excel file. Example pdf 'name' a 'name' and 'name' excel file, I want to fill in the name of the PDF with a combination of the first name and name of the excel file.
Thanks for any help.
Using the example above, the custom in the 'name' field calculation code will be:
This.getField("first_name").value = Event.Value + "" + this.getField("last_name").value;
-
Both inputs of printer with different names for the same printer
I try to add a new printer in Windows 7 64 bit laptop. I chose to add a printer in printers and peripherals and selected add a network, wireless or Bluetooth printer. I have two tickets for the same printer
Why are there 2 inputs and one which should I use?
These entries are actually at the same network address (192.168.1.10). The second address Specifies a particular port (3910). Software print server HP Jetadmin 'web-based' uses the 3910 port to receive the print requests. See http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c03975926
The second is probably 'discovery of Web Services' (see http://en.wikipedia.org/wiki/WS-Discovery). You probably don't want to use it from the "Add printer" Wizard
I suggest to select the first entry. This is the normal way to network printers appear in the add a Printer Wizard. For example:
If you have any problems with printing, post back and I'll see if I can diagnose the things for you.
-
I was told do not to use the < div class > tags too many times. I used them for the texts, the images, to clear the floats, basically, I built my website using multiple < div class > tags. So if I can not use several tags < div class > can I use the tags < class p > several times in the same html page?
I have a string of logos at the bottom of my Web page that all use the same css for all logos features. It would be the right way to write the code:
HTML
< class p 'logos' = > Logo1 < a href = "... > < /a > < /p >"
< class p 'logos' = > Logo2 < a href = "... > < /a > < /p >"
< class p 'logos' = > Logo3 < a href = "... > < /a > < /p >"
< class p 'logos' = > Logo4 < a href = "... > < /a > < /p >"
< class p 'logos' = > Logo5 < a href = "... > < /a > < /p >"
< class p 'logos' = > Logo6 < a href = "... > < /a > < /p >"
CSS
.logos {}
margin-left: 10px;
}
Here is my site: http://www.darbymanufacturing.com/test_website/index.html - this is the site built with all the tags div class
I restarted the site in order to write the code correctly so that I don't come from errors when downloading from the server, as I have with the above link.
However, custom (and it's only a good one I think) are to use IDS to identify the primary container on your page. Clearly you usually only have one header, content, footer, etc., area on a page. This allows you to immediately identify where these rules apply. Using a more generic class selector does not give you the same immediate locatability. In addition to this, ID selectors have a specificity greated than the class selectors, which reinforces the rules cascade in the specific containers.
Maybe you are looking for
-
Qosmio G20 blocked on JBOD in BIOS
Hello I have a problem with the Toshiba Qosmio G20-109.The system does not start, the two hard drives JBOD (unable to start Windows).HDD1 - 120 GBHDD2 - 250 GB So I wanted to put the first disc HARD 1 1RAID-0 using the method described in the Manual:
-
Re: My recovery for Satellite A200-23d CD is scratched
Help, please! I scratched my recovery CD and afcorse now, it's gone! Please tell my how can I get another or if a another solution for this problem! Help, please! IT IS URGENT!
-
Downloaded Driver does not install correctly
Print HP 2410 died, but everything on my pc and the set up worked well. I got the used 2610xi. I removed the 2410 and tried the disc to instal 2610... She has no cause not windows 7... closed it... went to HP.com and download the driver and 5 upda
-
Windows Update 0x8024402C error code.
I ran the fix it Center microsoft. Said that the reports on the problems and solutions takes disk space and cleaned. At another check and he said windows update problem could not be repaired. Has returned a CODE of ERROR: Windows Update error code /
-
Update and version of Firmware current C8180
Hello My impression of HP network configuration page, it says that my current firmware revision is DAxxFN0735BR, how can I check if it is up-to-date and still more how do I update if necessary? Thank you Dan