Native deployment on Windows problem

Similar Questions

• issue after deployment to windows 7. I get the error to follow "the Windows experience index.

  Original title: question after deployment to windows 7.

  I just roll back to windows 7 Windows 10

  the best thing I have ever done in my life.

  .

  Now when I try to run the windows experience index
  I get the follow error
  "The Windows experience index.
  your system could not be calculated.
  before, I update to windows 10

  I don't have this problem
  so, how do I solve this problem?

  Hello

  We appreciate your time and effort to get back to us.

  As the step above did not help, I suggest you to try the steps in the link below and check if it helps:

  Performance Windows ERROR index  

  Experience index Windows error "the windows experience index for your system could not be calculated.

  Let us know the status of the issue. We will be more than happy to help you further.

  Thank you and Merry Christmas to you also.

• I received a call from < removed > telling me that they would help my dose of my windows problems. Is it a scam?

  I received a call from the saying that they would help my dose of my windows problems. Is it a scam?

  Hello

  They are cold, you try to pick up the 'business' calling

  It's a scam.

  Either these so-called "Microsoft" Tech companies want to sell you a worthless software, or remote access to your computer to try to steal your credit card and bank information and also achieve an identity theft on you.

  You are the only person who knows if you gave them remote access.

  If you gave them remote access and you do Internet banking, contact your bank, to explain, and change passwords.

  If you use your online credit card, cancel and get a new one issued to you.

  And the only way that willl you know that you are free to them is to backup your data and do a clean install of your operating system.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And Microsoft does not contact you unless YOU have made prior arrangements with them to do.

  There is an article in the link I'm you provide at the end of this one

  Read this Information from Microsoft:

  "Avoid scams to phone for tech support.

  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  Don't be fooled of unsolicited calls. Don't provide personal information.

  Here are some of the organizations that cyber criminals claim to come:

  • Helpdesk Windows

  • Windows repair center

  • Microsoft technical support

  • Microsoft technical support

  • Windows Support Group Technical Department

  • Microsoft Research and Development Team (team of Microsoft R & D)

  See you soon.

• Missing programs, perhaps a Windows problem

  I was working on my computer very well, I've been on the internet for hours without problem (no antivirus warning and I wasn't downloading anything, only normal pages), and I have existing, up-to-date antivirus.

  Well, the problem is that most of my installed programs have just "party" and some standard Windows programs are gone too. Programs, I had on my system for years and have used several times without problem simply disappeared as well as programs such as calculator and paint. Well, they are the programs that I realized that I have lost so far. To give you an idea, go to start, programs, and usually 1 columns 3/4 programs are displayed, it is now maybe 2/3 of a column. When you go into program files, there is nothing in the missing programs, it seems that they have been uninstalled.

  I have done a complete analysis of the system through Norton Antivirus and came up with nothing. I restarted and then a box come to say a word about "Windows is unable to complete the program installation..." something in this direction, and nothing has come on my desktop except for the desktop, My Documents and trash. I did a restore of the system at the point of older, two weeks ago, and it came up saying: "we cannot complete the system restore, no change has been made."  Arghh!

  I'm computer literate and worked a bit in the it helpdesk and I have absolutely no idea. I think since this is a Windows problem that we may have to clean this completely and started from scratch with new windows. I you gave as the screenshots I can, to maybe give you an idea of what is happening. Note on the last note of screenshot that there are a few things has highlighted. I did not do that, then maybe it's the question? This is the "InstallShield Installation information", "Uninstall information", and "windows update". Also, I am happy to install Real VNC if that helps diagnose the problem. Can you please guide me the case, before you go to all this effort?

  Thanks in advance.

  Run this tool to remove the flags hidden files and folders and see if that's it, it's.
  http://download.bleepingcomputer.com/grinler/Unhide.exe

  See also this article on the thieves hidden files and desktop rmeoved shortcuts and programs startmenu shortcuts in the folder temp\smtmp.
  Missing desktop icons - program files empty
  http://www.experts-exchange.com/A_6209.html

• iPod touch recognized as a digital camera, apple says it's a windows problem

  iPod touch is recognized as a problem digital camera.the says it's a windows problem...

  Hi cuteshey,

  Welcome on the site of Microsoft Windows Vista Community.

   

  Solution 1: Update the drivers

   

  (1) the Device Manager open, either by right clicking on computer and then click on manage, and finally on Device Manager, or by typing devmgmt.msc in the box then find (or run) on the bottom of the start menu and press ENTER.

  (2) find the ipod, he (should) be listed under digital cameras, right click it and choose "update driver software".

  (3) select "Browse my computer for driver software".

  (4) for the location (you must have already installed itunes) use C:\Program Files\Common Apple Mobile Device Support\Drivers (replace C: for what is the letter of your system drive), and then click Next, windows will find the driver here and continue to update the driver
  (5) after the update is complete, click Finish to close the dialog box, then disconnect the ipod and plug it in again.

  Solution 2: This seems to be a known issue with the iPhone and iPod touch from Apple, I would suggest also allows you to check the link that contains the iPhone and iPod touch: Disabling digital camera notification in Windows Vista

  http://support.apple.com/kb/TS1500.

  Juice to ensure that it is not not a Windows problem check the Apple Support Article: iPhone and iPod touch: disable the notification of digital camera on Mac OS X

  http://support.Apple.com/kb/TS1501

  Announcement: Camera, video and photos: answers to frequently asked Questions

  http://discussions.Apple.com/Ann.jspa?annID=779

  Solution 3: If the issue is not resolved, it is recommended to contact Apple for iPod Touch http://www.apple.com/support/ipodtouch to have the best support or you can reach the Dell Forums: http://discussions.apple.com and check for extra support and check if they have new updates on this issue and if they can help fix the same.

  Let me know if that does or does not work. Good luck!

  Hope it will be useful.

  Thank you and best regards,

  Kadoch - Microsoft Support

  Visit our Microsoft Answers Feedback Forum and tell us what you think.

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Windows Installer + VSS + Windows problems in Windows 7 SP1 Activation

  I used this Windows 7 machine for 5 years now and has recently encountered several problems, which probably are closely linked:

  1. Windows installation problem
  Can't update programs, although new install if they do need Windows Installer to do. Most but not all Windows not updates install.

  2. the problem of volume shadow copy Service

  Failed to create system restore points. With VSS errors appear when I try to do. No previous restore point is available.

  3. Activation of Windows problem
  A pop up keeps appearing every 1 or 2 hours, saying that my computer is not running genuine Windows. Obviously nonsense since this PC was bought during the original Service Pack 1 of Windows 7 and I've never had a problem before.

  I searched a lot online to solve all these problems. I tried hundreds of possible solutions, but nothing has worked. I think that it is all caused by the same thing, but I am unable to find it.

  Ready to provide more information. Thanks in advance.

  (PS: my camera has a pre installed Windows 7 so I own not a Windows DVD, don't want to reinstall the OS, prefer to try to find the cause of the mess)

  Do you have same problems if you create a new user account?

  What Antivirus utility you installed?

  Have you installed a new hardware or software or both since you started these problems?

  Could you describe some of the thing things you've tried?

  Start by checking your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  then

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

  You can also try to perform a repair upgrade to see if it works. You need to download a copy of the edition of so that your system is under license:

  Download Windows 10, 8, 7 ISOs

  https://www.heidoc.NET/Joomla/technology-science/Microsoft/67-Microsoft-Windows-ISO-download-tool

  then

  How to make an upgrade of the repair - Notebooks.com

• 10 blackberry applications can be deployed in windows phone 8?

  Hi all

  I'm developing an application of cascades for blackberry 10 and I wonder what it can deploy in windows phone 8 due to all both are using C++?

  Thank you.

  No.... It is not the language that counts. What is important is the SDK, the API set available to the developer to call in the OS and libraries to get tasks done. Windows Phone 8 and BB10 don't actually have nothing in common in these regions, so BB10 apps absolutely cannot be deployed Windows Phone 8, in general.

  That said, sometimes we can use a restricted subset closely available APIs and build an application that can be re-targeted pretty easily. Using WebWorks (HTML5 stuff) can recover you a part of the way that he, and third-party frameworks that you can probably get most of the way there. I'm not familiar with the names and details, so I'll leave any other comments in this regard.

  In a very simple sense, however, you can deploy ever * exactly * the same application because the packaging is different. BB10 apps are packaged as files '.bar', with a certain set of content, while Windows applications are something else... It of like how a ".exe" file will work very well on DOS/Windows, but cannot be used on a Linux platform, even if 100% of the code it contains is compatible.

• Not authentic "Windows" problem

  Story: My Dell Inspiron laptop has been running Windows Vista when initially purchased in 2009.   Dell has provided a free upgrade to Windows 7, and this upgrade went well several years ago.  Thus, the machine has been works well on Windows 7 Home Premium Service Pack 1 for awhile.
  Don't know if this is important: a couple of months, I replaced the hard drive.   I did a backup/restore image for the operating system on the new drive.   I don't think that I was invited to return keys validation of Windows at this time here.   I had no problem and the machine worked well after the replacement of the hard disk.
  Now, all of a sudden I get a pop up window that says "this computer is not running genuine Windows.
  However, my Windows is genuine!
  I tried to solve the problem by installing the WindowsActivationUpdate.exe, but will not install.   I get the error message "update installation failed.   Information about the error - 0xC8000247
  I tried to get the Windows product key (from the sticker on the bottom of the laptop) via Control Panel/system/change the product key but it says invalid key!
  Something is clogged to the top, but I don't know what.
  Thanks for any help you can provide.

  Thank you for your response.    I tried several related suggestions and more did not help.   That seems to have solved my problem of Windows Update is reinstalling the technology Intel Rapid Storage Technology driver as suggested by george1009 in your third link above.

  As for my Activation of Windows problem, I typed in the wrong product key.  I entered the key on the sticker on the computer, but it is valid only for Windows Vista (original OS), but not for Windows 7 (current operating system).  I found that my Windows 7 upgrade disk envelope and who had the key valid on it.
  Thanks again for your help.

• Hyperion 11.1.2.3 Linux based components of server deployment and windows system

  Hello

  I'm new and this is perhaps a delicate question.  I am trying to wrap my head around this idea, is it possible to correctly install Hypeiron planning on linux? The hyperion java web application and especially the services of the Foundation can be installed under linux.

  However some server such as the dimension epma server components can only be deployed on windows. What this means is optimal only installs Hyperion Planning on windows servers? To keep all components on a single server? There are stories where some parts of Hyperion was deployed for linux AND windows?  There was a small section in the installation guide of PMC 11.1.2.3 on page 151, but we didn't know about how windows and linux would work together.

  Let me know if I need to clear up any confusion about my question.

  Thank you!

  Hyperion works in mixed mode OS. For the deployment of Web applications, you must deploy all on Windows or Linux.

  On page 151, its about HFM. If you have HFM as the source for the FR or Web analysis reports, you must install & config HFM, EN/WebAnalysis under Windows to create the new Weblogic domain.

  If you do not have HFM in your deployment, you need not worry.

  Kind regards

  Santy

• Deployment Mobile ADF problem

  Hello-

  I'm so frustrated with the ADF Mobile deployment. I have already created several Android applications using the native language and never did face problems of this kind. I am very familiar with the ADF development as well.

  in any case, it's my problem.

  I downloaded the mobile application of adf sample from the following tutorial, but I have been unable to deploy on the Android emulator in Release mode. The debug mode takes forever.

  Oracle JDeveloper 11 g Release 2 tutorials - creating Mobile Applications with Oracle ADF Mobile

  This is the error messages I receive:

  [23: 02:51]-deployment began.  ----

  [23: 02:51] the target platform's (Android).

  [23: 02:51] early deployment of ADF Mobile 'Employees' to Android application using the profile "Android3."

  [23: 02:51] undeployment.

  [23: 02:51] - incomplete deployment.

  [23: 02:51] the following configuration of Android preference is invalid or missing. Set these options in the preferences of JDeveloper on the Panel of the ADF Mobile:

  Key to past

  (oracle.adfmf.framework.dt.deploy.android.deployers.ValidatePreferencesDeployer)

  I generated the keystore using keygen by the tutorial and it's not ' t help.

  That's how I validated the keystore.

  C:\Oracle\MiddlewareMob\jdk160_24\bin > emp.keystore keytool-list - keystore

  Enter keystore password:

  Keystore type: JKS

  Keystore provider: SUN

  Your keystore contains 1 entry

  EMPL, November 19, 2013, PrivateKeyEntry.

  Certificate fingerprint (MD5): 8A: 27:53:64:B3:AF:01:CA:9 C: 2F:47:2 A: 50:16:E4:40

  C:\Oracle\MiddlewareMob\jdk160_24\bin >

  I tried to recreate the file of keys twice, but it did not help. I know that the entered password is correct.

  Any suggestions will be appreciated. Also, I started learning JQuery Mobile at the same time.

  Thank you

  S

  I had the same problem and then I realized that the tools-> preferences window is too small so don't see «Key Password"field within the «Realase» tab Just resize the window.

• Portege R100 - question about the installation of the USB port and Windows problems

  Hello

  I just bought a used Portege R100, but I have some problems. Of course the laptop isn't a CD or DVD, player so I tried an external DVD drive, but it did not work. What kind of device I have to install Windows (not an edition of recovery or anything like that, but a whole new windows on the formatted HARD drive)?

  I also have another problem: whenever I plug a USB device (I tried the DVD drive external and a USB keyboard) when I start the laptop, it seems to hang. At least, I am not able to type anything more; the keyboard of the laptop is dead (the point where the entrance would still be flashing in the BACK platform, but typing. sth on the keyboard isn't doing anything). It is not normal, is it?

  I also tried to get to the BIOS, but I tried various commands (F1 to F12, DEL etc.), but I couldn't access the BIOS. It would be great if someone could tell me the command for it.

  Thanks in advance for the help and sorry for the bad English, I'm not a native speaker :)

  The forum has a search function, but to help you look still these 2 wires:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19232
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=23921

  Here you can see that XP installation isn't very easy, but can be done successfully

  as long as you are working in an environment with appropriate back-drivers back, you can use any kind of external (USB or pcmcia) CD player you want

  the bios is accessible by pressing ESC and the Start button

• deployment of Windows applications

  We have 10 applications windows .net that are hosted on windows server 2008.

  All of these applications are in a single default container in an Application Pool.

  Now we have a scenario where we deploy applications only 2 out of 10

  Stop the application pool and deploy only for these two applications, causing one problem for others 8 applications also are not deployment.

  We tried to get the PID of partitions, COM + so we can kill the PID of this particular dllhost and making our deployed application but could not achieve to get it via a command prompt or powershell

  So is there a solution to kill a dllhost.exe of a particular application hosted on windows server 2008 default containing under the application pool?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Error-2147286787 installation of Microsoft Sql Native Client on Windows XP

  Hi all

  I'm having a problem with my sql Server 2005. When im clicking on the components of the server, tools, books online and samples, and license agreement for the popup
  and when I click on it it shows me "Microsoft Sql Native Client and Microsoft SQl Server 2005 Setup Support files" and when I click on install error messages r dispalyed:

  Microsoft Sql Native Client: An error has occurred during installation:
  Error-2147286787 installation of Microsoft Sql Native Client. See the log file for more information. An unexpected error has occurred.

  I installed IIS and .net framework 2.0, as im using the service don't pack 3 no need to Windows Installer. Is there a problem with my system, or is - this software problem.
  Please help my project happens and im stuck. Thanks in advance.

  Kind regards

  Rohit.

  Hello

  Given that the problem is related to SQL Server, I recommend that you post this question in the Instances of SQL Server.

• need help with error # 800704db (10 istall windows problem)

  can anyone help?

  Start by resetting your Windows Update components:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

  I suggest before you stop and install the updates, disconnect from the Internet, first.

  Alternatively, you can perform the upgrade manually:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• How to install Blackberry 10 native SDK in Windows 8

  I try to start Blackberry10 setup under windows 8.je have downloaded bt Blackberry10 native SDK during installation, I get this error "error of Mode User Interface. Can someone help me how environment Blackberry 10 installation in Windows8 waterfalls

  Appreciate your link, but unfortunately it was useless, rather this link solved the problem

  http://www.online-tech-tips.com/Windows-8/run-a-program-in-compatibility-mode-in-Windows-8/