NAV. does not work in a stand alone, although WLS in integrated only

Similar Questions

• First 10 Elements: Menu DVD does not work on your stand alone player, file Open_DVD\Sources

  Hallo,

  I have prepared a project with Premiere elements 10 using video clips of 1440 * 1080 with some petite markers and menu structure. The structure of the DVD encoded has VIDEO_TS (as usual) and OpenDVD records which is new to me and that obvoisely contains important information.

  Read the DVD with Windows Media Center, everything is good. Using a stand allone player that the menu not played correctly, the proportions are not correct and there is no possible navigation. I tested the DVD in an electronic market with many players and found only one or two who have been able to read the DVD. My questions:

  How to build a DVD that consists only of the VIDEO_TS folder with all menu information included, and which is compatible with a standard DVD player? (what settings)

  What is OpenDVD folder?

  Thank you for your response, best regards

  Your project Preset should match your Source footage, as close as possible.

  If you go on a DVD, a workflow would be to import and edit your material anamorphic 1440 in a corresponding project. Then, once finished, / the share of exports in DV - AVI, create a new DV (DS) project, import this file DV - AVI inside and do what the authoring, then burn to disc for the DVD.

  Good luck

  Hunt

• Graphics ATI DV7 - 4087CL Pavilion does not work on the games! and on windows. Only Intel HD

  Hello everyone, I have the problem on my laptop (Pavilion DV7-4087CL_. I have windows 7 64 bit and all drivers are updated and special ATI AMD Radeon LAST. After installation too, I can't play 3d games or whatever the game with my ati.

  DXdiags also said INTEL HD not ati amd...

  What solution have with this and how im taking all the power of the laptop because is very slow with intel

  Concerning

  Arkadios

  Hi @arkas

  Welcome to the HP Forums! I see you're a few graphic problems. Did you install the ATI driver on the AMD website? If so, that's the problem. You have switchable graphics, which means that you have two video cards. The Intel card is designed for your treatment of basic graphics every day while the ATI card is designed to handle most of the work. Switchable graphics drivers are configured by the manufacturer of the laptop not the manufacturer of the graphics card.

  I suggest that you install your AMD HD graphics driver and your high-definition Intel Graphics Driver. If you need more information on the switchable graphics this document HP Switchable Graphics on laptops equipped with Intel and ATI GPU.

• BlackBerry Smartphones after reboot, phone does not work, nor can he be identified by cell phone, only exception messages can not go screen or anything, just messages

  all keys are frozen so could not load in safe mode either. Out stack but still no luck

  Eception Exception jav.lang.error OK button is available but cannot click on it. no answer

  just discovered in orange that the phone has a virus. Must be returned to be replaced. The only application that I rebooted was an update to twitter for blackberry.

• Re: Satellite L500 iCQ, as Volume Rotary control does not work

  Front volume control does not work. Volume is set to maximum and can only be controlled by the mouse and the slider control.
  Can anyone help?

  To be honest I don't think that anyone will be able to help you with this.
  As far as I know that's not used such mechanical volume on older models of computers laptops, but electronically part controlled by software, so the only thing you can do is to test the functionality with the settings and see if the problem will be the same.

  What else can you do? I do not know. Maybe update the BIOS, but I do not think that this will help you.

  Do you use pre-installed OS original you got with your laptop?
  Have you made some changes or anything that can have a negative influence in this?
  Since when you noticed this strange behavior?

• Portege M800: webcam does not work with Win 7 64 bit - webcam driver open failed

  Hey guys

  just got my companion to upgrade me for win 7 64 bit.
  Now, my camera does not work. I had to reinstall the drivers (they only had vista drivers) - can anyone help?

  "driver open webcam fail. Please restart camera or computer.

  See you soon

  Hello

  Seems that you used the wrong webcam software/driver or is not compatible
  You must use a webcam Chicony Win 7 64 bit software.

  > Now my camera does not work. I had to reinstall the drivers (they only had vista drivers) - can anyone help?
  The Portégé M800 Win 7 drivers are available on the European driver Toshiba page.
  You will also find the driver of Webcam Win 7 64 bit 1.7.260.0526

  Please remove first the old driver, and then restart the unit clean to the BONE using CCLeaner, reboot the device again and then install Chicony webcam software.

  Welcome them

• Satellite L300 - wireless switch power switch does not work

  I installed XP on my L300 - 110 (PSLB0E), cause I don't like Vista. I installed all the drivers, and everything is quiet OK. But one thing little annoying me - wireless, switch, it does not work. So I can turn on Wi - Fi only by pressing Start-> connections and so on.

  I need help! Who can tell me, what driver or software do I need to install? Thnx a lot!

  Hello

  Do you mean the hardware switch on the side of the fron of the laptop?
  Normally this switch still works because he founded material s and must always be defined on IT if you want to use the WLAN and OFF to disable WLAN.

  Have you tested the switch on OS preinstalled Toshiba? Maybe it's a hardware problem

  Make sure that the latest drivers are installed!

• Satellite A300 - 1 2 does not work with 3 GB or 4 GB of memory

  Does not work with 3 GB or 4 GB of memory, only 2 GB!
  And if I plug a memory in bank1 2 GB module (bank0 is empty) - it's doesn't work too!

  He arrived with 3 laptops. (Sorry, my English is not good :))

  Have you thought about a fact that the phone doesn't support 3 GB or 4 GB of RAM?
  Isn't it?
  Maybe you should check the manual of the first user that is preinstalled on your laptop.

  I think you would find information very important.

  Equipped laptops Intel Mobile GL960 chipset is supported by the maximum memory capacity of 2 GB.
  As I m not wrong not your laptop was equipped with chipset Intel Mobile GL960 the case must therefore be clear now. or not?

  Also is important to know that you will need to use always first bank/slot memory (bank0) If you use a DEAD memory module!

  Good bye

  I think that you can assign 10 points ;)

• I keep on getting error 0x6D9 and 0 x 80070424 code when you try to activate my windows firewall, also my mcafee firewall does not work.

  I keep on getting error 0x6D9 and 0 x 80070424 code when you try to activate my windows firewall, also my mcafee firewall does not work. I have Windows 7 and it started only caused since last week. Can someone give me an idea on how to solve this problem?

  When you have McAfee running, he provided the Firewall & automatically deleted the Windows Firewall.   Panel\Windows Firewall control page should have shown a message say.  If you managed to change the settings for the Windows Firewall then you might have corrupted both the McAfee & Windows Firewall.

  I really think you should try a restore for some time point before you tried modifications, if that is even possible.

  If you have uninstalled McAfee Control Panel, programs, then you must also run the Tool McAfee Consumer Product Removal or you will get several unpredictable problems.

  If you still have problems after running the McAfee tool then it could be the result of the previous Windows Firewall changes & the corruption of the system resulting.  Your system is in an unknown state as a result of these changes.

  You can try running SFC/scannow in an admin command prompt, but it wouldn't do any good.

  You may need to use the installation DVD to do a repair installation.  I hope get you lucky, but you may need to do a complete reinstall of Windows.

• addChild does not work in flex...

  Hey,.

  When I create a display object then do: addChild (display_object) in the < fx:script > section a mxml file, adobe air showed an error message:

  Error: addChild() is not available in this category. Instead, use addElement(), or change the skin, if you have a.

  And I tried to use addElement and I get this:

  Implicit coercion of a value of type flash.display:Shape to an unrelated type mx.core:IVisualElement.

  Any ideas?

  Thank you

  Chris

  It is not that it does not work in Flex 4 +.  It does not work in classes that implement IVisualElementContainer.  You can only add an IVisualElements to an IVisualElementContainer.  This is similar to how you might only add IUIComponents containers in Flex 3.x.

  UIComponent is an IVisualObject, so if you want to do things the way you should have them in Flex 3 to add a shape, you can wrap in a UIComponent.  However, Flex 4 offers some pretty cool improvements, if you use the spark (e.g. Rect or Ellipse) primitives.  If she can put them all in a DisplayObjectContainer, it will be, which helps the CPU usage.  See http://help.adobe.com/en_US/flex/using/WSda78ed3a750d6b8fee1b36612357de97a3-8000.html for more details.

  HTH;

  Amy

• LR 6 stand alone download does not work... only CC

  LR 6 stand alone download does not work... only CC

  Serialize Lightroom trial to activate like Lightroom 6 CC

  https://helpx.Adobe.com/Lightroom/KB/serialize-Lightroom-CC-trial-to-activate-as-Lightroom - 6.html

• Why don't Adobe make it clear that the Dehaze tool does not work with stand alone Lightroom 6?

  I upgraded to LR 6 because of the Dehaze feature only to find out after that I bought that is not available without subscription of the CC. Very disappointed. Why isn't this clearly from the beginning. ???

  It was clarified at the beginning, to the official announcement of Lightroom 6.1/Lightroom CC 2015.1 https://blogs.adobe.com/lightroomjournal/2015/06/june-updates-to-cc-photography.html

  It lists the features currently available in Lightroom CC (which isn't Lightroom 6), and there is an asterisk next to Dehaze, the asterisk is said "Please note that these features are not available in the stand-alone version of Lightroom 6.1."

  Is that clear enough?

• SpeedGrade does not not with dynamic or stand-alone links.

  SpeedGrade does not not with dynamic or stand-alone links. Projevt cannot be bound, nor a project can be opened from scratch. Opening or creating a file isn't even an option, and I have a huge project to turn in tomorrow! WTH Adobe. I've updated the first CC 9.0.2 and still nothing

  Sorry for the correction, but Adobe (sometimes confusing) nomenclature, it's "Dynamic Link" to AfterEffects and 'Direct link' with SpeedGrade. I explained by engineers that they are two very different processes where the difference in name. My answer... If the processes are so very different, why are the names that could be confusing? "Because they are the more precise terminology of what happens." I think they are the most accurate to spoil the spirit of people, but I'm sure the engineers are smarter about this than me!

  The Direct link process ONLY works when he 'sees' appropriate corresponded builds... for the current coupled:

  CC2015.0.2/build 9.0.2(4) for first Pro;

  CC2015.0.1/build 9.0.1x21 for SpeedGrade

  Then... check your SpeedGrade (wrench, top tab of the 'About' page), making sure it is the correct version.

  Also... If there is a problem with is functional Sg (sometimes these programs need the Cleaner CC Adobe app to uninstall, then a new re - install) you can use the color workspace editing in Premiere Pro... He has a considerable amount of the capacity of the Sg, but not (for an experienced user of Sg) treat the whole meal. When even... you can make a good amount and quite quickly. And this gives you the expanses of SpeedGrade, that are better than the crappy things 'Fast' of this eons PrPro and '3 - Way' color Correctors use... yuck.

  Neil

• I have Photoshop CS5 extended version 12.04 with camera RAW version 6.7. It does not work with files. NAVE. Help me please

  I have Photoshop CS5 extended version 12.04 with camera RAW version 6.7. It does not work with files. NAVE generated by NIKON 610. What can I do?

  Hi danielem,

  Need you minimum Photoshop CS6 & Camera Raw version 8.3 use of Nikon 610 RAW files.

  

  see the related link: supported by Adobe Camera Raw devices

  However, if you cannot upgrade to Adobe Photoshop CS6, then you can use the DNG Converter to convert your images to DNG and use it with Photoshop CS5

  Mac: Adobe - Adobe Camera Raw and DNG Converter: for Macintosh: Adobe DNG Converter 9.3

  Windows: Adobe - Adobe Camera Raw and DNG Converter: for Windows: Adobe DNG Converter 9.3

  Let us know if that helps.

  Kind regards

  ~ Mohit

• My computer crashed and I tried to re-download CS6. I have a serial number for CS6. but it does not work. I noticed that there are several versions of CS 6. Which version goes with serial number [removed]? I downloaded the stand of design «»

  I have a serial number for CS6. but it does not work. I noticed that there are several versions of CS 6. I downloaded 'standard design', but it did not work. Which version goes with serial number [removed]?

  Thank you

  Bill Heinsohn

  Check your Adobe account online.  If you have registered the software version should be shown there.

  Never share your serial number publicly... anyone can use it.