NB100-11J - upgrade of the memory

Similar Questions

• Satellite L500-1KK - upgrade of the memory

  Hello

  My L500-1kk came with the following memory specifications:

  Standard memory: 4 096 (2 048 + 2 048) MB
  maximum extension: 8 192 MB
  technology: DDR2 RAM (800 MHz)

  Locations of memory expansion 2 × (1 to configure)

  1. now, I need to update my system to 8 GB, because it says that my system has 2 x memory slots, and it is Mo (2 048 + 2 048), does that mean I need to replace the original modules with 4 GB modules?

  2 (1 for configure) means? is it an empty space where I can add a 4 GB module?

  3. what else do I need to know about adding memory to my system?

  Thank you

  Hey,.

  If you want to switch to 8 GB of RAM, you must remove the two modules of 2 GB (current) and purchase two 4 GB modules.

  As you have already written in the memory specifications, you need RAM DDR2 800 MHz.

  You can buy new memory modules in an ASP or check you some online stores. Kingston is also good RAM modules.

  Interesting information about the upgrade of RAM you will find also in your manual!

• Satellite L655-11J - result of the memory of the Windows experience index

  The results are
  Processor: 6.9
  Memory RAM: 5.9
  Graphics: 6.7
  G game: 6.7
  Hard disk: 5.9 Toshiba mk5059GSXP

  The result of the memory is too low?

  Hey,.

  Why is the result of memory too low? The score is still good scores even other parts are better.

  In addition, the Windows experience index is not important in my opinion. You can see a few numbers at the end, but what to do with it? I don't see a reason to make such a test if I convinced and satisfied with my computer. Who care about these things other landmarks? ;)

• The upgrade for the SR1750NX memory

  My old SR1750NX is still up and running (since ' 05!) and I want to squeeze some more memory in it.

  However, here is what I know of research in the past on this computer;

  Win XP - The original OS - shouldn't you put in the full 4 gigs of RAM (there are 4 slots for 4 gigs), and I believe that the Web of Compaq site even warns against this.

  I currently have 2 GB in there.

  I guess this, or you install the memory sticks in PAIRS for this computer?

  So, is it good to put in a stick more than 1 single gig,... or could I put in two 512?
  
  Any help appreciated.  I use it for 3D renderings, and it's pretty slow, so any speed I can get is great!

  Hello:

  Everything you have written that I agree with.

  This is the product for your PC specification page.

  http://support.HP.com/us-en/document/c00572530

  You can see that the upgrade info memory says exactly what I informed you about installation 4 x 1 GB of memory.

  No, not all will be available, but it will work without problem.

  If you want to install/3 GB, you can install 512 MB - 1 GB - 512 MB - 1 GB more.

  You can not install it in the order of 1 GB - 1 GB - 512 MB - 512, or visa versa.

  But if you just want to install 4 x 1 GB more memory and remove the 2 x 512 GB which will be just fine.

  Personally, I think that you should just add 2 x 1 GB in free slots.

• Reset the NB100-11J - how does it work?

  I want to sell my Netbook NB100-11J but I want to rest the device. There is a restore CD, but there is no optical device so that I can do this. And now? I have spend any other optical device for this CD.

  Can someone help me?

  Hello!

  As far as I know Windows XP was preinstalled on your laptop.

  There is only one way to reinstall the laptop: you need an external CD/DVD drive. It's the own possibility.

  Good bye

• Is it useful to upgrade the memory on the Satellite M70 - 394?

  Is it useful to upgrade the memory on the Satellite M70 - 394? Where the best place to buy it and what I should go for? How will this affect my laptop? It will void the warranty at all?

  Sorry for so many questions

  Hello

  First of all it s worth it to upgrade the memory for portable computers. The increases in performance and the operating system should work better and faster.
  Well, I checked a few websites, and it seems that it is possible to upgrade the memory on this laptop to max 2048 MB (2x1024Mo)

  As far as I know the laptop came with a 512 MB module. In this case, the second Bank is empty. The memory location is placed at the bottom of the unit. If you want to upgrade the memory to remove the slot cover down and carefully insert the module. I think you'll find instruction how to handle the upgrade memory in the user manual.

  In addition, you can order the compatible modules form the Toshiba service partner. In this case, you will be sure that you have taken in charge to 100% and compatible modules.

• Satellite A200 - how to upgrade the memory?

  Hi, I have a Satellite A200 and want to update the memory. How would I know what to look for when buying? Thank you.

  Hello

  > I have a Satellite A200 and want to update the memory. How would I know what to look for when buying?

  According to the specifications of the product a 200 series:

  You can upgrade to the top to 4 GB ddr 2 (667 MHz)

  Post, exact model you have

  Post edited by: Jeka -?

• Can I upgrade the memory and the graphics card on Satellite A60

  Hi all..
  I have a satellite a60 652.
  I want to improve it with new ram and graficcard.
  can I use more than 1, 5 GB of ram? later with an update of the bios?
  and if I can change the graficcard? If the answer is Yes... What is the best card I can actually use?
  or is there a map which is almost a geforce 7600 or 6600 (or ati 9700) I can use?

  Thank you for the help
  Ingo

  PS excuse my English ;)

  > I want to upgrade the ram and the new graphics card

  Upgrading RAM is possible but the graphics card is unable to be updated!

  If you want to upgrade the memory you could update to 1536 MB max.
  The A60 supports 512MB internal memory and it is so that one memory slot where the extra RAM module can be inserted.

  These modules are compatible:
  PC2700 512 MB (PA3312U - 1 M 51)
  1024MO PC2700 (PA3313U-1M1G)

  Concerning

• Re: How to upgrade the memory on Equium U300-15I

  I've searched the forums and yes I found the son with Assembly instructions, but I do not have a manual for my laptop bought recently renovated.
  My problem is to determine which cover to locate the memory slots.

  I have 4 GB custom which should arrive earlier this week.

  LOL we talk about memory upgrade but how someone should know what model of laptop, you mean?

  Maybe you could provide these details?

• Equium A60 runs unstable - how can I upgrade the memory?

  I have a friend visit me who has an Equium A60 which is very unstable when she runs multiple applications. I checked and it has only 192 MB of RAM. Can be increased and if so how much. How many slots are there on this machine?

  She is currently in the USA and I checked on Toshiba USA website and cannot find this PC is listed, so it should only be sold in Europe. It would be useful if someone could tell me what kind of memory it takes so I could look for it here. She is a student and in great need of a stable computer for his studies.

  Thanks a lot for all the help in advance.

  Hello

  Of course you can upgrade the memory.
  I guess you have only 192 MB memory main because the laptop came with 256 MB internal memory and the 64 MB are shared by the graphics card! This is why only 192 MB are free.

  Anyway, as I said the laptop came with 256 MB internal and memory is not removable.
  So only one slot is expandable!
  If you can upgrade the memory for max 1280MB (256 MB + 1024 MB)

  You can use the modules:
  PC2700 256 MB (PA3311U - 1 M 25)
  PC2700 512 MB (PA3312U - 1 M 51)
  1024MO PC2700 (PA3313U-1M1G)

  Do you know where is the crack?

  The slot is placed at the bottom of the device! The cover is fixed with a screw.
  Remove this screw and you will be able to open the slot and improve memory.

  PS; I think that upgrading memory is described in the manual of Toshiba that was preinstalled on your laptop.
  Alternatively, you can download this manual from the page of Tosh

  concerning

• My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  Reinstall OS X from scratch and add more RAM.

  Ways to help make a slow Mac faster

  17 reasons why your Mac runs slower than expected

  Slow performance of Mac? This Article addresses!

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  6 easy tips to speed up OS X Yosemite on your Mac.

  Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Things you can do to solve the slow Downs

  If your computer seems to run slower, here are some things you can do:

  Start with tours: OS X maintenance - MacAttorney;

  The X Lab: the X-frequently asked questions.

  " Safe mac" Mac Performance Guide;

  " Safe mac" the myth of the dirty Mac;

  Maintenance fast Mac Help.

  Start in Safe Mode , and then repair your hard disk and permissions:

  Fix the hard disk and permissions before Lion

  Boot from your OS X install disk. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  Repair the hard drive - Lion-Lion/mountain/Mavericks

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until it appears the screen of Menu utilities. Otherwise, restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager screen. Select recovery HD disk icon and click on the button below.

  When the recovery menu appears, select disk utility. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no error is not reported, then click repair permissions. Wait until the operation is complete, then exit FROM and return to the main menu. Select restart from the Apple menu.

  Restart your computer normally and see if it helped at all. Then do little maintenance:

  For disk utility can't handle situations, the best third party is Disk Warriorutility;  Fixed DW only for problems with the disk directory, but most disk problems are caused by the corruption of directory; Warrior drive 4.x is now compatible with Intel Mac.

  Note: Alsoft ships DW on a bootable DVD that will boot Mac running Snow Leopard or earlier. He cannot start Mac that came with Lion or later preinstalled, however, DW will work on these models.

  Suggestions for OS X maintenance

  OS X performs certain maintenance functions that are supposed to take place on a daily, weekly, or monthly period. Maintenance scripts that are run at the beginning AM only if the computer is turned on 24/7 (no sleep). If this isn't the case, then a great solution is to download and install a shareware like Macaroni, JAW PseudoAnacronor Anacron utility that will automate the maintenance regardless of whether activity if the computer is off or asleep.  Dependence on third-party utilities to run periodic maintenance scripts has been significantly reduced since Tiger.  These utilities have little or no functionality with Snow Leopard or later version, and must not be installed.

  OS X automatically defrags files smaller than 20 MB in size, so unless you have a disk full of very large files it little need to defragment the hard drive.

  Under no circumstances should you install operating MacPaw or ZeoBit software (CleanMyMac/CleanMyDrive or Mac Keeper, respectively.) You don't need special software to keep your computer.

  Useful links about malware Protection

  "If you have an immediate problem with ads popping up see the Mac without danger" Adware removal Guide and AdwareMedic.

  Open Safari, select Preferences from the Safari menu. Click the Extensions icon in the toolbar. Disable all Extensions. If it stops your problem, then re-enable one by one until the problem returns. Now remove this extension as it is the origin of the problem.

  The following comes from user stevejobsfan0123. I made minor changes to adapt to this presentation.

  Difficulty a few pop ups browser that supported Safari

  Common pop - ups include a message saying that the Government has taken over your computer and you pay release (often called "Moneypak"), or a false message saying that your computer has been infected and you need to call a number of tech support (sometimes claiming to be Apple) to get it to be resolved. First of all, understand that these pop-ups are not caused by a virus and that your computer has not been assigned. This "hack" is limited to your web browser. Also understand that these messages are scams, so don't pay not money, call number, or provide personal information. This article will give an overview of the solution to remove the pop-up window.

  Quit Safari

  Usually, these pop-ups will not go by clicking 'OK' or 'Cancel '. In addition, several menus in the menu bar may become disabled and show in grey, including the option to leave Safari. You'll probably force quit Safari. To do this, press command + option + ESC, select Safari, press on force quit.

  Relaunch Safari

  If you restart Safari, the page will reopen. To avoid this, hold the "Shift" key when opening Safari. This will prevent windows since the last time that Safari was running since the reopening.

  It will not work in all cases. The SHIFT key must be maintained at the right time, and in some cases, even if done correctly, the window is displayed again. In these circumstances, after force quit Safari, turn off Wi - Fi or disconnect Ethernet, depending on how you connect to the Internet. Then restart Safari normally. He'll try to reload the malicious Web page, but without a connection, it will not be able to. Leave this page by entering a different URL, i.e. www.apple.com and try to load it. Now you can reconnect to the Internet and the page that you entered is displayed rather than the malicious.

  An excellent link to read is Tom Reed Mac Guide of malicious programs.

  Also, visit the FAQ XLab and read of detection and avoid malicious software and spyware.

  Check out these articles from Apple:

  Mac OS X Snow Leopard and malware detection

  OS X Lion-Protect your Mac against malicious software

  OS X Lion mountain - protect your Mac against malicious software

  OS X Mavericks-Protect your Mac against malicious software

  On the quarantine of file under OS X

  If you need antivirus protection Thomas Reed recommends to use ClamXAV. (Thanks to Thomas Reed to this recommendation.)

  The user Joe Bailey comes this equally useful advice:

  The facts are:

  1. There is no anti-malware software can detect 100% of malware out there.

  2. There is no anti-malware that can detect all targeting the Mac.

  3. the best way to prevent breaches the most is for you as the user is aware that

  the most successful malware attacks rely on sophisticated social engineering

  techniques preying on human greed, * and fear.

  4 Internet pop-up windows telling the FBI, NSA, Microsoft, your ISP has detected malware on

  your computer is designed to trick you into installing their malware thinking it's a

  protection against malware.

  5. some of the anti-malware market products are worse than malware

  go where they are supposed to protect you.

  6. be careful where you go on the internet.

  7. don't download anything from sites, you know are safe.

  8 avoid links that you receive in email, always be wary, even if you get something

  you think a friend is, but that you did not expect.

  9. If there is any question in your mind, then assume that it is malware.

  Troubleshooting Applications

  I recommend that you download a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaneror hiding a Cocktail that you can use to delete the former newspapers and archives, cleaning, etc. Corrupted cache, logs or temporary files can slow down the application or OS X crashes and panics of the kernel.

  If you have leopard snow or leopard, then for similar repairs install Applejackfreeware utility.  If you do not start in OS X, you can boot into single-user mode , where you can run Applejack to make a set of routines for repair and maintenance of the command line.  Note that it takes 1.5 AppleJack for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later versions.

  Basic backup

  For some people, Time Machine will be more than enough. Time Machine is part of Mac OS X. There are two components:

  1. a panel of Time Machine preferences as part of the system of preferences;

  2. a request for Time Machine, located in the Applications folder. It's

  used to manage backups and restore backups. Time Machine

  requires a backup drive that is at least twice the capacity of the

  drive being backed up.

  You can also get an external drive at least equal to the size hard disk internal and make (and maintain) a bootable clone/backup. You can make a bootable clone using the disk utility's restore option. You can also create and maintain clones with good backup software. My personal recommendations are (the order is not significant):

  1 Carbon Copy clone

  2. get backup

  3 already seen

  4 superDuper!

  5. Synk Pro

  6. Tri-Backup

  Visit The FAQ XLab and read the FAQ on the backup and restore.  Also read How to back up and restore your files. For using Time Machine, visit FAQ Time Machine of Pondini for help with all this time Machine.

  Referenced software can be found at MacUpdate .

  Additional tips

  Make sure you have a sufficient amount of RAM installed for the number of applications you run simultaneously. Make sure to leave a minimum of 10% of the capacity of the hard disk as free space.

  Add more RAM. If your computer less than 2 GB of RAM and you use OS X Leopard or later, then you can do it with more RAM. Snow Leopard and Lion works much better with 4 GB of RAM that is their system. Most concurrent applications, that you tend to use the more RAM you should have.

  Always have at least 15 GB, or 10% of the capacity of your hard disk as free space, the largest. OS X frequently accesses your hard disk, so offering enough free space will keep things slow down.

  Check for applications that may be hogging the CPU:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  This problem occurs often because of a corrupted cache or the preferences file or an attempt to write in a corrupted log file.

• can I upgrade the memory to 16 GB for HP Pavilion dv6-7080se Entertainment Notebook

  can I upgrade the memory HP Pavilion dv6-7080se Entertainment Notebook 8 GB 16 GB

  Yes. your laptop supports up to 16 GB of memory module configurations.

  source of reference. HP Paviliion dv6 Maintenance & Service Guide

  

• Can I upgrade the memory of my Labtop (g6-2286se Pavilion)

  I recently bought a HP pavilion g6-2286se.

  It has 6 GB of ram (1 x 4 + 1 x 2), I can improve by taking the 2 GB ram & him substituting an another 4 GB of ram?

  Hello

  You laptop will support 8 GB - IE 2 x 4 GB modules.

  It is usually best to upgrade using corresponding modules, but if you want, you should be able to just install another 4 GB module - you can use an application such as CPU-Z to find the specifications of your existing module (the relevant details can be found under the memory and Spd tabs) or an automated System Scanner.

  Ram installation procedure can be found on Page 55 of your & Maintenance Guide.

  Kind regards

  DP - K

• Upgrade the processor and the memory of SX280

  Hello

  I have OptiPlex SX280 bought 3 years ago

  which has Intel Pentium 4 530 memory and 2 GB.

  Given that I need to solve a problem of Supercomputing,

  I want to upgrade the processor and the memory instead of replace the computer.

  SX280 works with CPU Core2Duo E8200 having the same type of brooch (LGA775)

  and 4GByte momory?

  The SX280 BIOS is A09.

  Hope to hear a response.

  Thanks in advance.

  Message edited by yongminc on 10/19/2008 21:18
  
  

• Portege M780 - how to upgrade the memory?

  I have a M780. I wanted to move to 8 GB. But if I open the memory module, I can find a slot for the memory. How can I access the other get 2 x 4 GB?

  As they seem to be similar to the M750, maybe it's the same thing with the M750 and someone can answer this question. Unable to find a service manual for the M750 / M780 either.

  THX

  Marcus

  Hi schuerstedt,

  Really, you ask where the other memory module location?
  The user manual is not interesting for you right?

  Well, if you check the user manual, you can find an exact description how replace the memory sticks with lots of photos.
  Check this box!

  BTW, the other location is placed under the keyboard.