NB100-127: Bluetooth Module does not work

Similar Questions

• Toshiba common modules does not work properly

  Whenever I connect to the laptop, I get a message: Tfncky: Toshiba common modules does not work properly.

  Anyone know what this means?
  I wonder if that has something to do with my windows media player does not properly. If I open the application, it is not to maximize the screen shows the taskbar
  Finally, it simply says "not responding" and I have to close the application. Tried to remove and reload that a new copy of WMP but it does not help.

  I don't know what laptop mode you but the first thing to do is to reinstall the Toshiba common modules.
  Please visit Toshiba support and download page under http://eu.computers.toshiba-europe.com go to the download section, choose your phone model and download common modules.

  Please let us know if everything works well again.

• My Slideshow module does not work.

  The slideshow module does not work. It stays on a black screen, or return with a module error. Help me!

  Hi donaldwoodruff,

  Please turn off the graphics processor in the Lightroom preferences.

  Open Lightroom

  Go to Lightroom preferences in the Edit menu

  Click the performance tab

  Deselect the graphics processor

  Restart Lightroom

  Let us know if that helps.

  Kind regards

  ~ Mohit

• Libretto W100 - 10 d - 3 G Module does not work after the installation of the system

  Hello

  I just reinstalled the software on my Libretto W100 - 10 d, from the internal HARD disk recovery partition recovery procedure.

  After the intervention, I have a clean booklet; all works well, except my 3 G Module is not recognized: the SW of Wireless Manager is not installed, and the 3G module does not appear in Device Manager more!

  It seems that the 3G module is not installed! of course before the recovery procedure, it worked like a charm!

  I suspect something has disabled the 3G module (usually something similar happens in the BIOS...)

  Can someone help me so that the 3G module working in return?

  Of many tanks and best regards

  Hello

  Have you checked the settings in the BIOS?
  To be honest I'm not quite sure if BIOS contains separate power switch or option Wlan 3G but you must absolutely check it m.

  To access the BIOS press ESC and F1
  Where would the BIOS contains 3 G or Wlan option, make sure that this option is enabled.

  Then visit the Toshiba UE driver page and download and install the Ericsson 3 G driver
  This is the driver for the 3G module.

• L10-202: ACPI Module does not work with Linux SUSE 10

  I bought a Toshiba laptop L10-202 a few weeks ago and tried to install SUSE 10 on it. The installation went well but I have some problems with ACPI modules.
  I know that Toshiba recommends Windows XP but I have nowhere to ask for help because I could not find help on Linux forums. I should mention that I've recompiled the kernel because I considered that this was not necessarily.
  So far, the modules ACPI informs me on the temperature of the processor (57 degrees Celsius, the fan starts and at 52 degrees Celsius, it stops) and the only function that works is suspension on HARD drive. The battery level is not indicated because there is no file in/proc/acpi/battery/to read information on the battery. Except another ACPI hardware was detected by SUSE installation and works very well. I couldn't use the Toshiba_acpi module because this laptop has a Phoenix BIOS, but this isn't a big problem.

  You have an idea why ACPI does not work on SUSE and how could I solve the problem?

  Don't you think that there is no danger for the laptop to continue using SUSE, which limited the work of ACPI modules could cause damage to my laptop or it is safe to use SUSE?

  Thank you!

  Hello

  Well well, in my own opinion it s desirable that all functions of the laptop should work properly. But I put t think he might of s for laptop computer continue to use the Suse10.
  I would recommend using the other Linux distribution. That use you the Knoppix. This Linux you can stat from a CD or DVD and it works like a normal Linux operating system and you can also use the Windows XP.

  Little info on ACPI:
  With ACPI, the operating system can turn off devices, such as CD-ROM drives, when they are not in use. Another example: ACPI will enable manufacturers to produce computers that automatically turns on as soon as you touch the keyboard

  Good bye

• Qosmio F20: Bluetooth connectivity does not work with my phone

  Good day it

  I've had one laptop to another in the past and I didn't have this problem with this computer, but then 3 weeks ago I bought myself this Qosmio F20 and try to send the info to my Sony-Ericsson K600i.
  He worked with my other laptop. On my laptop I don't see devices in the Control Panel, but it doesn't seem to be any information for any active or visible Bluetooth to my phone.

  Could you help me please or tell me where to get the program?

  Concerning
  Jürgens

  Hello

  It would be very useful to know the name of your unit. Qosmio F20 - xxx.
  I ask because the Bluetooth module is not available on several units of Qosmio F20.
  In my opinion you should first check if the laptop supports Bluetooth.

• In 2012 LabVIEW MathScript RT module does not work

  Hi all

  I recently installed LabVIEW 2012 in my PC with Windows 7. However, Mathscript does not at all. It says "an internal error has occurred in the MathScript RT Module.  Restart LabVIEW and try again.  If the error persists, reinstall the MathScript RT Module. "I did it, but still does not work. It is said further than Mathscript is missing or not installed", but I have installed. What the problem would be, please?

  Have you been able to verify the installation and activation in the License Manager OR? It should say enabled for this computer and have a green square like this:

  

• Bluetooth headset does not work with Windows 7 - device is detected.

  I have a Dell XPS 1530, which had Vista 32 bit running. I have recently upgraded to Windows 7 Ultimate. Ever after that the Bluetooth of DELL BH 200 headset does not work with my laptop.

  The bluetooth adapter and the device is fine since I'm able to search and find all bluetooth devices, including my helmet. However, I get a yellow exclamation on the headset under devices. The headset can be paired with other devices such as my mobile and works very well.

  I tried to update the drivers and reinstall the device and the adapter from the Device Manager. We have a similar setup on my brother's computer and it works fine.

  Another thing to watch, would be what battery is used.  I know from personal exp some devices work with Toshiba stack, vs the MSFT pile up.  Do a search and see if anyone else uses a different battery with these devices. Network systems engineer * Zvetco biometrics * Windows Server 2008 R2 * Core 2 6600 @ 3.30 GHz * 16 GIGS RAM * NVIDIA 9400GT * * > please VOTE MESSAGES ALSO USEFUL TO HELP OTHER USERS

• Bluetooth mouse does not work up to this that deleted and added after Windows startup

  After you have added a device, namely my mouse Logitech V470 Bluetooth, it works fine until I turned off my laptop.

  The next day when I have power to the top of the mouse is no longer my Dell Vostro 1500, moves the cursor. But it is still displayed in the list of devices.

  The only way I can get it to again control must "remove hardware". Then I 'add device', it is discovered, and the driver is loaded.

  The bluetooth mouse works normally.

  What can I do to have the mouse early control after turning on the laptop?

  Hi John,.

  Thanks for the reply.

  Are you able to connect other Bluetooth devices to your computer properly?

  V470 works not

  http://forums.Logitech.com/T5/mice-and-pointing-devices/V470-not-working/TD-p/551070

  My V470 Mouse Laser wireless Bluetooth does not work

  http://Logitech-en-AMR.custhelp.com/app/answers/detail/A_ID/20491/kW/connection%20V470

  If you still experience this issue I suggest you to post the question on the Logitech forums. You can contact them on the link below.

  Logitech forums

  http://forums.Logitech.com/

  Feel free to write us if you have any other questions about Windows.

• my bluetooth application does not work

  I would like to ask how to run my application bluetooth in my acer netbook.  I had been through the msg will appear on the screen saying RUN... but still does not work. I wanted to send music from my phone to my netbook but its not working... pls hepl me I do not know how to handle fixing it... Thank you and looking forward to hear from you.

  Hello

  Thanks for posting the request in the Microsoft community!

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  1. what happens when you try to send music from a mobile phone?
  2. you receive an error message?

  Method 1:
  To do this, you must control how pairs with the computer (which connects to) Bluetooth devices. To control how your computer pairs with Bluetooth devices

  a. open Control Panel by clicking the Start button, then Control Panel.

  b. in the search panel box command, type Bluetooth, and then click change Bluetooth settings.

  (c) in the Bluetooth settings dialog box, click the Options tab and do one of the following:

  · Pour rendre make your computer discoverable to Bluetooth devices, select the check box for Allow Bluetooth devices to find this computer.

  When a computer active Bluetooth device is in discoverable mode, it broadcasts a wireless signal that allows it to be detected by other Bluetooth compatible computers or devices. This is sometimes called pairing mode.

  · To allow Bluetooth devices to connect to your computer, select the check box for Allow Bluetooth to connect to this computer devices.

  · To be notified when a Bluetooth device is trying to connect to your computer, check the box for warn me when a new Bluetooth device wants to connect.

  See the link to add the Bluetooth on the computer.

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Method 2:
  You can update the latest drivers for Bluetooth and the software on the manufacturer's Web site and check.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Check out the link:
  http://support.Acer.com/product/default.aspx

  Please post if the problem persists, we will be happy to help.

• Bluetooth headset does not work in Windows 8

  I've just upgraded in Windows 8 and my bluetooth headset does not connect (worked well on Windows 7), he could be detected with the mating, but always appear "offline" after having been matched, both headphones are having the same problem, while mice bluetooh work well, is there whatever it might be do?

  I solved the problem.  I upgraded my Lenovo E530 to Windows 8 and the helmet worked.

  I made a copy of the Broadcom Bluetooth 4.0 driver and installed on my HP LPTOP.
  The Voyager Pro + headset now works on the P and Lenovo

• Lightroom Develop Module does not work?

  My OS is version 10.11.5, I use Lightroom 5.  My module work has continued to develop.  When I move the sliders, nothing happens.  I restarted my computer, reloaded the Lightroom software and development module still does not work.

  This problem just happened.  I tried to edit several photos and results are the same, nothing happens when I move the sliders.

  What should I do next?

  Try resetting the Lightroom preferences once: How to reset preferences in Lightroom?-the Lightroom Queen

• Automatic PowerCLI loading modules does not work

  Hello world

  I am currently struggling with the function of automatic loading of the PowerShell module. Since 3 PowerShell, the PowerShell is capable of auto-loading modules. Chris Wahl wrote a nice article on it (link). I don't remember if it ever worked for me, but I can't observice this behavior on two different deployments.

  I use PowerShell 5 on Windows 8.1. I installed the latest PowerCLI 6.3. But I'm observing this also with 4 PowerShell on another client. The PowerCLI Module folder is part of my PSModulePath:

  PS C:\Users\p.terlisten > $env: PSModulePath-split ';

  C:\Users\p.terlisten\Documents\WindowsPowerShell\Modules

  C:\Program Files\WindowsPowerShell\Modules

  C:\Windows\system32\WindowsPowerShell\v1.0\Modules

  C:\Program Files (x 86) \VMware\Infrastructure\vSphere PowerCLI\Modules

  Despite what I try: module No. PowerCLI is imported automatically. VMware PowerCLI modules are listed in the output of "Get-Module" - ListAvailable After you import VMware.VimAutomation.Core manually and any other modules are loaded automatically if used.

  Suspicion, why does not work? Thanks in advance!

  I had the same discussion, the autoload never worked until now.

  It will take a full module conversion AFAIK

• My performance of the Lightroom Develop Module does not work correctly.

  My performance of Lightroom is not great.  After you have installed the appropriate NVIDIA, GeForce card GTX 970 graph with 4 Gig of Ram, Windows 10 (latest version) with 32 Gig RAM and the latest version of Lightroom CC (2015.3), I am always facing update slow in the develop module image.  The software does not remember the excerpts that I created (1:1).  Whenever I click on a photo of the flows, the share of the image of being clear-> blur-> to clear, which take about 15-20 seconds.  This happens even though I have already generated previews 1:1 for all images in the catalog.  I need help to set the settings so that I can have a good experience with lightroom.

  I tried to follow some recommendations:

  1. leave a 160 Gig camera Raw Cache framework

  2. install an SSD for the start and placed the catalog Lighttroom and Cache folder under the default Images directory, under the my account profile

  3. has created a new catalog that is less than a few LIVE in size

  Posted below is my System Info.   Is there anything else I can do to make this work?  It's very frustrating!

  ---------------  SYSTEM INFO ------------------------------------

  Version of Lightroom: CC 2015.3 [1052427]

  License: Creative Cloud

  Operating system: Windows 10

  Version: 10.0

  Application architecture: x 64

  System architecture: x 64

  Number of logical processors: 8

  Processor speed: 3.5 GHz

  Built-in memory: 32717,7 MB

  Real memory for Lightroom: 32717,7 MB

  Real memory used by Lightroom: 925,4 Mo (2.8%)

  Virtual memory used by Lightroom: 1086,4 MB

  Memory cache size: 0.0 MB

  Maximum thread count used by Camera Raw: 8

  Camera Raw SIMD optimization: SSE2, AVX, AVX2

  System DPI setting: 96 DPI

  Composition of the Bureau enabled: Yes

  Exhibition: 1) 1920 x 1200

  Entry types: Multitouch: no, built-in touch: No, built-in pen: no, touch external: No, external pen: no keyboard: No.

  Graphic processor News:

  GeForce GTX PCIe/970/SSE2

  Check the supported OpenGL: past

  Provider: NVIDIA Corporation

  Version: 3.3.0 NVIDIA 359.00

  Rendering engine: GeForce GTX PCIe/970/SSE2

  LanguageVersion: 3,30 NVIDIA via the Cg compiler

  The application folder: C:\Program Files\Adobe\Adobe Lightroom

  Library path: C:\Users\Johnny\Pictures\Lightroom\Lightroom Catalog.lrcat

  Settings folder: C:\Users\Johnny\AppData\Roaming\Adobe\Lightroom

  Plugins installed:

  (1) home canon Plugin

  (2) Facebook

  (3) Flickr

  (4) HDR Efex Pro 2

  (5) attachment Plugin Leica

  (6) home Plugin Nikon

  (7) perfect B & & W 9

  (8) perfect effects 9

  (9) perfect improve 9

  (10) perfect photo Suite 9

  (11) perfect Portrait 9

  (12) resize perfect 9

  Config.LUA flags: None

  Map #1: Seller: 10de

  Feature: 13 c 2

  Subsystem: 29783842

  Revision: a1

  Video memory: 4008

  Map #2: Seller: 1414

  Device: 8 c

  Subsystem: 0

  Revision: 0

  Video memory: 0

  AudioDeviceIOBlockSize: 1024

  AudioDeviceName: Speakers (Realtek High Definition Audio)

  AudioDeviceNumberOfChannels: 2

  AudioDeviceSampleRate: 44100

  Build: not initialized

  Direct2DEnabled: false

  GPUDevice: not available

  OGLEnabled: true

  I uninstalled Lightroom CC.  renamed the Lightroom to my profile folder, rebooted the PC.  Reinstalled lightroom CC, choose to create a new lightroom catalog, any of a local session of my C:\ Image folder.  The behavior is the same.  Lightroom does not remember previews and continuous 'loading' and make turn the wheel little whenever I click on an image of the band.  It's crazy...

  You're clicking on between images in the Strip to develop? The develop module does NOT use 1:1 previews. Those that are used only in the library. Develop, Lightroom must load the raw file and return each time, this isn't a good solution to quickly go through images to work to develop. It should take a few seconds to fully make a new raw image loaded it depending on the size of your images are. If you want to speed up switching to develop image there are solutions. One is a raw cache big camera, that you already use and secondly to disable acceleration of graphics card, which, if enabled, slows down the initial loading. Finally, you must ensure that you are the 2015.3 or the 2015.1.1, and that you do not have 2015.2. Version 2 had several bugs that could slow this process terribly.

  15-20 seconds is extremely long for this process of loading in my experience. I can't get it to be slow on a much less powerful system than if the files are > 500 MB high resolution stitched tiff files. Not with RAW files (I pull a 24 Megapixel). If they are raw files, something is wrong. You have turned off the facial recognition?

• Develop Module does not work. I have the membership, but it says that I don't have

  I pay 9.99 per month and suddenly Adobe says that I can not use the develop Module. If they don't get the job, they will not be able to use my debit Module

  Hello

  Please see Module development does not work after last update 5.5

  Hope that helps!

  Kind regards

  Sheena