NB100-12N: WLan with the modem 3G activation

Similar Questions

• Satellite M30: Cannot use COM with the Modem port

  Hello

  I have a satellite m30. I have problems with the com port to use with the modem. I get an error code saying 12 resources etc. There is no i/o or IRQ conflict IRQ 04 and e/s beach is 03F8 - 03FF. I tried to uninstall various things to free resources, but still the same error.

  Any help would be greatly appreciated.

  This problem when you use the Toshiba Recovery CD?
  Try to disconnect all the external devices and install Windows from the Toshiba restore CD.

  Additional please check several comments here in the forum area Modem. I found several threads with similar issues

• Connectivity problem - problem with the modem or the router of network

  I had a network with 2 computers.  The main computer was a Windows XP operating system and the secondary is a Windows Vista operating system.  There was a modem connection and the router. Due to a storm and a leak in my ceiling in my main computer got wet and I couldn't use it.  I have connected the modem without the router directly to the secondary computer, but it is not recognize the modem.  "Internet Explorer cannot display the webpage." So I ran the diagnostics and received a message that there could be a problem with the modem or the network router.  I did the thing 'ipconfig' and there is no gateway.  Is there anything I should do to make this secondary computer main computer?

  Hello

  If you use a router there is no primary and secondary, all the computers connected to the router are equal.

  Many Internet service providers allow you to control some form of autehtication (ID, PW) online journal.

  Your router and the computer humid probably were installed to authenticate.

  If the router does not use it.

  Otherwise, contact your ISP and ask for the help of authentication.

  Jack MVP-networking. EZLAN.NET

• Netflix on media center crashes with the message 'checking activation of the device.

  Netflix on media center

  Netflix on media center crashes with the message 'checking activation of the device?

  Hello

  Try to disable the security software temporarily to see if that makes a difference.

  Note: Make sure to enable the antivirus on IT to make sure that your computer is protected

  For more information, you can also publish your quries Netflix community forums: http://community.netflix.com/forum or the Greenbutton

  Diana
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• BlackBerry Smartphones BlackBerry keeps beeping all the time - just beeps when the connection with the carrier is active.

  Gentlemen.

  I have a Curve 8900 with the 4.6.1.133 (Platform 4.2.0.85).

  This unit maintains a beep every 10 seconds, I tried to remove the battery when the BB was on, wait a minute, put it again.

  I looked at all the configurations.

  I Don t no the slightest idea and wanted to throw it in the window.

  Any ideas? Advice?

  NEW INFORMATION. The device stores only beep if the wireless connection with the carrier is active. If it s off the beeps stops. I m using Claro to the Brazil.

  Camilo

  I found the solution. This is a bug beetween the network operator's SIM card software and the BlackBerry device. It s already solved. I had to follow certain steps to enable and disable a specific feature of the network operator and wait a dialog box confirm my operation.

  The beeps comes with the dialog box, but the apears only dialog box if you are in a specific screen of the blackberry. If you are in the home screen, it will not appear and you hear the beep.

  Camilo

• frequent blocking of 30-60 seconds with the solid disk activity

  I have a problem when VMware Workstation locks for 30 to 60 seconds, with the solid disk activity.  No reaction, even to things like no caps lock or num lock (virtual machine uses the keyboard extended; if I'm in the host, it shows the caps/numlock lights - i.e., VMware is busy and does not move the keyboard to the virtual machine, but does not lock the host)

  Host and client are Windows XP SP2; I am running VMware Workstation 6.5.0 build 118166 (there is a newer version, but nothing in the release notes applicable looks to this)

  Laptop has 4 GB of memory, 2 Ghz Core 2 Duo.

  2 discs; system on a virtual machines on another (7200 RPM, 16meg cache)

  I tested both S.M.A.R.T. drives - well within the parameters of "good".

  I tried everything I can think with it - enabling/disabling virtual memory (XP) on the host or client, performance parameters, change the virtual computer's memory size, etc..

  It happens sometimes strange - when I'm just typing (as in this sentence - it just did it) and is happening in the virtual machines that are different sizes of memory.  It seems to happen in all virtual machines, regardless of their size of the memory.  (I have VMs from 512megs upwards) It happens when I'm under VM only one or more - it seems worse when running more than one, but not linear. at the least not bad enough to keep me from running more than one.  (I usually use only one or two virtual machines) It never happens if I am not under VMware. If I'm just under apps on the host.

  It does not matter what applications I use in the client.  Definition of VMware to keep everything in memory does not help.  Disable the removal of pages of memory doesn't help.  (which shouldn't matter if I run only 1 VM, would it?)  Newspapers are disabled. I have configured VMware to use the maximum of the reserved memory (3456meg).  There is no worse if I run apps in the host (usually just one editor, sometimes Firefox, sometimes Nero Burning Disc)

  I am baffled by the latter.  It seems to be deteriorating lately, but maybe it's just my annoyance level Crescent...  I'm not sure; I think that way started when I went to this laptop, but I'm not sure.

  Someone at - it ideas?

  -Al Weiner-

  Look over your logs, I see that you seem to have active VMware shared folders.  VMware shared folders have all kinds of strange questions.  Try to disable/turn off your VMware shared folders to see if that makes a difference.

• "Nine" iPhone 7 delivered with the lock of activation on

  Hello. My new iPhone, plus 7 was just delivered to my door. Unpacked, everything seemed good, phone seems to be sealed. It turned on, tried to activate it... but was informed that "activation lock" is activated. Then I checked the IMEI number and discovered that the IMEI belongs to an iPhone 6... weird.

  At least one user more is out there with the same problem. Someone else to do here such a question? How can this problem be solved?

  Contact whoever you purchased and request an Exchange. Clearly an active device with lock activated, activation impossible possible be a new unit of the retail sales.

  If you have bought from Apple, you have a period of 14 days unconditional return to enjoy.  Return it and get a new device. If not Apple, contact the seller on his return it and get a new replacement.

  Was it an Apple authorized reseller?  If this were not the case, I hope that they stand by their clients and it will do good.  Even if by definition a unauthorized dealer does not have access to new units of the retail Apple OEM, so they had to acquire the device somewhere else.

• Problems with the modem on L40 (Vista)

  Hi guys,.

  I am trying to help a friend out with his new laptop computer, as she dosen't have DSL and needs must use dial-up. I'm new to Vista so please tell me if I'm missing something obvious.

  Right... I use the same cable modem and telephone line that also works on another PC, and before ask you I pluged it in the modem port and not the ethernet port. I can query the modem ok by Device Manager / modem properties. I noticed that the modem is configured for some software of Toshiba and not a comm port, is this correct? When you look at the software Toshiba itself it looks like the comm3

  When I try to create a dial-up connection / use dialer I get the error that it cannot get dial tone, I also tried to change the setting so that he always tries to dial without tone, nothing helps. If it works on another PC ok, I'd say it was the cable modem or phone line.

  Any ideas?

  See you soon

  Hello

  Are you if that cell phone is properly connected to the telephone line in the wall?

• Problems with the modem Toshiba G450

  Hello

  We faced a problem. We have installed a software and drivers of Toshiba g450 on different laptops to use it as a modem for a mobile phone network. When we have logged in as administrators all fine, when we have logged on as a normal user in the field, the software will search the modem without success. We do not have such a problem with other USB modems.

  Thank you

  André

  Sorry Andrew, but this forum is explicitly designed to discuss with the portable mobile computer.
  G450 laptop, desktop, PDA, or cell phone is?

• Problem with the modem after reloading XP on Satellite Pro M10

  I recently rebooted XP on my Pro M10 and now I get the message in the Modem Properties: Diagnostics: Query Modem - "the port that the modem is attached could not be opened. This is perhaps due to a hardware conflict. Check the Device Manager to verify that all devices are functional. As far as I know, the device displays the modem (COM3) Manager works OK. But it's not!
  Can anyone help? Thank you.

  Hello
  Before starting the discussion on the modem can you please be more specific with the term reloaded? You reinstall the unit using the recovery CD or Microsoft full version CD?
  It is very important because after the installation of the recovery CD, it should work properly because the image of Toshiba includes the correct driver for the modem. Otherwise, you should try to reinstall the modem using the right of the page to download CD Tools or Toshiba driver.

• Issues with the modem with XP Pro after upgrading from xp family

  I upgraded to XP Pro and cannot create a dial-up connection because this option is not available for me. I checked the Microsoft support pages and enabled dial-up as suggested by using regedit.
  Still no difference. So I guess that the modem or the modem settings are the problem. Ive tried to download the driver couldn't get one for xp pro.can someone tell me the necessary driver for xp pro

  In Control Panel, if I go to phone options and modem, I see "Toshiba Software modem AMR COM4" but, if I go into the settings of the Modem in Control Panel, I get the message that the modem is not installed correctly and I have to uninstall and reinstall. I did this several times without success.

  He drives me crazy - can anyone help?

  Hi Mikey,

  as a first step, it would be good to know which model you have.

  Then we can compare it with other models and perhaps a driver XP modem to another model fits!

  For the first time, here is therefore a standard modem installation oder.

  1. check if the modem is entered in the Device Manager
  2. check if the modem is configured and that it works?
  The Control Panel must be open and go to the phone
  options of modems and. It should be your modem!
  If it is not shown to you, then you must install the
  modem driver.
  3. double-click on modem and go to the Diagnostics. The
  modem query button queries the commandments with
  check the return signal. This will give you some additional information
  the modem works properly.
  4. then set up a standard dial-up connection to your
  provider of
  5. go in the properties of the modem (Device Manager) and the
  Check the brand in the "wait for dial tone before dialing" has NO
  been resolved!

  You can try!

  Pete Bye

• Anyone having problems with the modem from Cox and Time Capsule

  Hello

  Lately my internet falls down every day or every two days with Cox. I have reset the modem, the time capsule, the routers extreme apple, etc. shut down and restart my whole network. I called Cox every two days to refresh the modem.

  I heard that I may need to reconfigure my Time Capsule (acts as a router) to avoid this problem.

  No one knows what to do here?

  Thank you

  Please, try the following:

  Open the AirPort on your Mac utility (Finder > Applications > utilities > AirPort Utility)

  Click on the image of the time Capsule

  Click on edit in the window that appears

  Click on the Internet tab at the top of the next window

  Click the Internet Options button at the bottom of the window

  Make sure that the IPv6 configuration is set to Local link only

  Click on save, if you make changes, then click Update at the bottom right of the window

  When Cox fully implements IPv6 (they are not), you may be able to return to the automatic configuration.

• Satellite A200 - 13 M - XP x 64 - problems with the modem drivers and webcam

  Hello!
  I recently installed Windows XP x 64 on my laptop.
  I have two devices that do not work properly.

  (1) does anyone know how to get the driver for the built-in modem? There is no version the x 64 required for download.

  (2) the webcam does not work. I had a problem of 'Windows Image Acquisition': error telling me to put this service to activate the webcam. The problem is that this service is, by default, already activated.

  Thank you for your help.

  Hello

  You are right. 64-bit drivers are not available. Unfortunately, 64-bit version is not supported. To be honest, I'm sure that the modem is not so important for you and you can turn off this feature.

  I can't say much because I use the 32-bit operating system only on webcam.

• Windows XP does not detect any internet at all despite the computer with the modem to work.

  I recently installed Windows XP Professional on my new iMac via bootcamp.  While Windows itself works fine, it won't connect to internet at all.  Despite being connected to a modem ADSL via a Ethernet cable, and also have wireless internet, Windows does not detect any signal.  On the internet in the Control Panel, all connections page that appears is "1394 connection" under the heading "LAN or Internet high speed."  I tried several times to put in place a new internet connection through the Setup Wizard and everytime, no internet is detected.

  I know that the modem works because all the other computers in my house are fine online, including on the side of Mac of the iMac.  If anyone has an idea as to how I should resolve this problem, your help would be greatly appreciated!

  Thank you

  Daniel

  Moreover, these are things I've already tried:

  I've tried to manually and automatically set up an internet connection
  I spoke with my ISP, the modem works fine
  I have re-partitioned the hard drive and reinstalled XP

  The "1394 connection" is the IEEE 1394 (FireWire) from your computer.  There should be cable system and under the heading wireless connections "LAN or Internet high speed."   There is no need to run the Network Setup Wizard or set up a new connection.

  Open the Device Manager (Start > run > devmgmt.msc ) and go to the network adapters section.  You may need to install the drivers for them.

• Unable to connect with the modem router e2500

  I have an old Speedstream 5100 modem hooked to my router e2500. Everything works well except if for any reason any my modem disconnects from the ISP I can not log in via the route to reconnect it. I need to connect a cable modem to computer direct run connect script then modem plug in router all is well again.

  Any ideas why the connection to the modem router is blocked?

  Thnaks,

  Al

  al_mathews wrote:

  My Speedstream has only an Ethernet connection so I did not know that he resembled a router for the local network. I changed the mode of bridge on the PPoE configuration on e2500 / Speedstream and reconnected to the ISP on the e2500 configuration screen. Who can solve the problem of reconnecting from now, it is run on the e2500.

  One thing I see now is since I left the modem IP set to 192.168.0.X can't do it all through the e2500. Is it because my DHCP in e2500 is configured with 192.168.1.X range IP modem is not covered in my network? If I directly connect Speedstream and place you IP 192.168.1.X will become visible on LAN?

  You are unable to access the modem even if you have a PPPoE connection. For PPPoE the E2500 will not need an IP address from the modem so it does not have DHCP on WAN port and so we never see. When you try to access the address of 192.168.0. * the E2500 it will route through the tunnel PPP to the ISP.

  If you connect your computer directly to the SpeedStream it should automatically get a DHCP address (assuming that the computer is still ongoing on the DHCP protocol and not with a static IP address and the SpeedStream does not automatically neutralize the DHCP server in Bridge mode). If you have configured a static IP address on the computer, you must change the IP address to an address of 192.168.0. *.