NB100 XP & - cannot install the utility of keyboard shortcuts

Hi guys...

I buy a NB100-11R and I installed xp on it... all is ok, but...
The only problem is with the utility of keyboard shortcuts...
I can not install it... installation start-up and stop in a few seconds without evaluating or popup messages.

Special keys are... half of work... the "F2", A, S, esc and F12 are works not... the key F8 seems functional (I see in system preferences that alter the frequency but the * icon fan that will gray or white * is not like the other icons)

Some ideas?

TNX! and have a nice day.

Hello

According to the info (more info) on the Toshiba European page the Hotkey Utility allows you to display on screen LCD LCD + CRT or CRT mode by pressing Fn + F5.

I'm not very well if you'll be able to use all THE FN buttons m description indicates that the driver allows the use of the Fn + F5 keys.

However, make sure your Windows XP is up to date (all service packs and patches are installed) and try to reinstall the Hotkey Utility again.

By the way; on the page, you will find the latest version of the BIOS. Make sure that if your computer is already using the latest BIOS

Tags: Toshiba

Similar Questions

  • Cannot install the utility software

    I had to replace my system Windows XP with Windows 7. My Windows XP system is dead. I always use my loyal HP Deskjet 5650 printer. It is connected by USB on my Windows 7 computer. Windows 7 not found drivers and install for my printer. I just went to download the utility software. HP has me use the HP Printer Utility For Windows Wizard. When I clicked on the file, it finds my printer. The printer tests very well, but you can't click Next so it's finished downloading. I wasn't able to install the utility software. It was very useful to check with her ink levels. Please help me.

    Bill

    I guess I didn't hear that. I've had my printer for 10 years and it still works. I guess it's time to buy a new. I tried a good all-in-one printer. Unless you want to spend $150.00 or more, you won't find one. I'm not ready to buy a new one. My printer work under Windows 7. I just wanted to see my ink levels.

    Thanks for your help Futoji

  • Satellite L555-110 - cannot install the Eco on Windows 7 utility

    Hey everybody,

    I can't install the utility on Windows 7 Professional 64 bit Eco. After loading the files, the installation routine stops and says no "supported BIOS". I use the latest version of the Eco (v1.1.11.64) and BIOS (v1.70) utility.
    Additionally PC Health Monitor does not work too. Setup concludes with '' don't support. ''.

    Any idea?

    Thank you in advance.

    Robert

    Hello

    You have installed all drivers for the laptop again or can you notice any yellow exclamation in Device Manager?

    I checked the Toshiba page and normally this laptop supports the Eco utility.
    Eco Utility works on the factory settings? I mean the version preinstalled Windows or you have only this question on the current version of Windows 7?

  • Cannot install the all-in-one printer

    Download HP officejet 4500 G510-m from HP website. When I click on install, I get the HP message: the system cannot find the specified file. I've never had this installation problem.  I could always install. I believe the download is corrupted

    System Windows 8.1

    I uninstalled printer because had message printer disconneted.

    Check the devices & printers in the control panel

    Model photosmart all-in-one printer scanner copier HPDD4BE7 (HP office jet 4500 G510g-m) is installed on my computer. Not my model according to the image

    I don't have photosmart all-in-one printer. I have printer HP office jet 4500 G510g-m all-in-one

    According to HP print and scan the doctor 4.3

    The following products are visible from your computer

    HPDD4BE7 (HP office jet 4500 G510g-m)

    connection: network

    software requirement: installed

    I tried to print but prints blank pages

    I wonder if the cause of the problem when clicking on install is that I have already installed (HP office jet 4500 G510g-m) HPDD4BE7 so get the HP message: the system cannot find the specified file

    I have good HP office jet 4500 G510g-m printer installed?

     

    Troubleshooting report

    Problem with the yellow triangle detected printer with an exclamation mark inside

    There could be problems with HPDD4BE7 (HP Officejet 4500 G510g-m). Windows will take additional steps to continue troubleshooting.

     

    Solution: Rename the extensions of .dat files in the Windows folder and reinstall the software

    First step: rename the .dat files in the Windows folder

    Search box, type % windir %

    No adjustment results found for your search %windir%\System32

    The first step is not a solution

    Second step: download and install the software from the HP site

    Not a solution: when click on get installation message: the system cannot find the specified file.

    You don't need to the second step if you HP print and scan the doctor 4.3 installed or HP printer installation for windows Wizard. It detects the office jet HP 4500 G510g-m software is not installed, select the printer and click on install to download the software.

    question: when when the get message install HP: the system cannot find the file logle even when Mcafee firewall has been disabled or uninstalled.

    I have no problem, download and install any software but

    HPDD4BE7 (HP Officejet 4500 G510g-m)

    I did the test HP officejet 4500

    Green connection box

    device status green checkmark

    I cannot install the software (HP Officejet 4500 G510g-m) HPDD4BE7 HP printer install wizard for Windows or printing HP and SCan doctor 4.3

     

     

    Ok

    Please try the following steps:

    1. First of all make sure that McAfee of real-time scanning is disabled until you restart the PC.
    2. Open the dialog box run by clicking on the Windows key and the R key on your keyboard.
    3. Type %windir% , and then click OK.
    4. Type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat.
    5. Type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat.
    6. By following steps 2 to launch the run dialogue box, type MSIEXEC /Unregister. in the Run dialog box and click OK.
    7. By following steps 2 to launch the Run dialog box, type MSIEXEC /REGSERVER in the Run dialog box and click OK.
    8. Launch the dialog box run by following steps 2, type % temp % and click OK.
    9. Open the last HP installation folder, that starts with the characters 7z (you can sort the view by date humidification) and click on the file Setup.exe .

    Please follow these steps in the exact order, is there a difference during the installation of the software?

  • "Cannot install the printer. Operation could not be performed. error 0x000003eb.

    I'm running Windows 7 (not Vista) and trying to install a Kodak printer driver and get "cannot install the printer. Operation could not be performed. error 0x000003eb"I searched constantly everyday for a fix. You have a solution other than what answers are already in this forum.  I uninstalled and reinstalled tried wireless and usb, installation driver separately, tried to install it in safe mode, run now utility scan.  I think that the problem began with an update of Windows 7 which has hung up and eventually having a corrupted file?

    Hello

    What is the exact model of the printer number?
    I suggest you to check if the printer is compatible with Windows 7:
    If the printer is compatible, then uninstall all the drivers connected the printer to the computer, download the latest drivers from the website of the manufacturer, the install without connection to the printer.
    Connect the printer when it prompts.

    If the problem persists, contact the printer manufactrer for assistance

    http://support.en.kodak.com/app/contact/selected/true

    Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  • Cannot install the update error

    I'm trying to update my iPhone 6 16 GB running iOS to iOS 9.3.1 9.2.1 but when I try to install the OTA update it says "cannot install the update." How could I solve this problem? The contact ID is not available because the unit is gray with a white screen and a contact ID button or space, which affects the update process?

    I would try to update via iTunes

    Connect the device using a cable to a computer (PC or Mac) running the latest version of iTunes 12.3.3

    The time that the phone is detected, choose software update

    If the phone is not detected - see here

    If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

    OR

    Please take a genius appointment at an Apple Store, or select another authorized service provider.

  • Satellite P750 - 02Q 001 - cannot install the Bluetooth and Tuner DVB-T_ATSC Yuan

    I have more than 20 years and the first time ever answer concerning support for the installation of a driver... sheeezz

    Recently bought laptop below and formatting of disk with WIndows 7 ultimate + SP1 (64-bit)

    Australia
    TOSHIBA SATELLITE P750 - PSAY3A - 02Q 001

    Cannot install the latest drivers below (everything worked when bought the laptop):

    -Yuan DVB-T_ATSC Tuner driver (for TV Tuner model only) driver 2.3.3.31 Windows 7 64 - bit 2.9 MB
    -Bluetooth Stack for Windows by Toshiba Bluetooth 8.00.06 (T) Windows 7 64-bit 78,08 MB

    * DVB - T Tuner Driver *.
    The EXE file extracted in the temp folder and goes no further.
    The device driver shows "STK7700D" with an exclamation mark against it. See the image below.

    * Bluetooth Driver *.
    First installation install the original driver, then he received close to 50% through the installation (appears to fail to install the components of RF RFBUS).

    Then install attempt fails to go too far (is unable to install the driver at all).

    Third attempt and subsequent attempts to repeat the foregoing in order. Install it just gets to a point and is unable to go any further.

    I tried to disable all Wireless WAN and various other comments and try the install again. Repeats exactly as above!

    Refer to pictures:

    DEVICE MANAGER
    http://I52.Tinypic.com/35cr38i.jpg

    1ST COURSE SETUP
    http://I52.Tinypic.com/2r6jfv9.jpg

    2ND INSTALL PROGRESS
    http://i55.Tinypic.com/jgphfc.jpg

    see you soon

    Dennis

    > The EXE file extracted in the temp folder and goes no further.
    > The device driver shows "STK7700D" with an exclamation mark against it. See the image below

    Try to extract the exe from another place, not in the temp folder.
    In my case, I created a folder on a second partition (D) and have extracted the exe file in this folder. Can go to the Device Manager, and then can install the driver through the Device Manager.
    Choose the installation procedure advantage and point to the folder that contains the extracted files.

    With regard to the issue of the BT;
    Download the new battery of BT from here:
    http://APS2.toshiba-tro.de/Bluetooth/

    Then clean the registry using the CCleaner.
    This tool is freeware and can be downloaded on several different pages.
    So after cleaning check if you could install new BT of the register stack.

  • Satellite C50D-A-133 with Win7 - cannot install the USB 3.0 driver

    I Satellite, C50D-A-133 with Win 7 x 64 and cannot install the usb 3.0 drivers.
    I download the driver from the support site of toshiba for usb 3.0 for win7 x 64 and it starts to install the driver, but in the end it saids...
    Windows found driver software for your device but encountered an erroe trying to install it.
    AMD USB 3.0 host controller
    The system cannot find the specified file.

    I try to point the location of the driver but same error.
    Other drivers installed ok only gives error

    I ve downloaded and unzipped the driver and everything seems OK.
    As far as I know laptops equipped with platform AMD isn't chipset driver and after installing display driver must be installed USB driver.

    Try to download it again and start the installation manually.

  • Re: NB100-12: cannot install Windows XP

    I cannot install the operating system to start, for a clean installation, the cd boots and seems to start installation, drivers etc. start loadind
    Then before you get to the point "want install you windows page, an error message appears saying my HARD drive is damaged or has a virus?"

    Any ideas?

    I can't really help, but I see the same problem :( I tried XP, 2000 and server 2003 installation CD. Either I get the same message you saw, or Installer Blue-screens.

    I've seen it suggested elsewhere to change the SATA in the BIOS from AHCI to compatibility, but that does not help either.

    I have to admit, it's as if the Windows Installer has problems see the hard drive, but I don't know what to do about this. Install a different disk drive, maybe?

  • Cannot install the update for Satellite Pro A200-E7E - bad series flash cards

    Hello

    I tried to install the utility to update the flash cards for Satellite Pro A200 E7E model and it will not complete installation, saying: wrong serial number.

    My model is without a doubt listed in the updated information, and it is available on the page of updates for my model.

    Help!

    Something similar has already been described here in this thread:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=31779&TSTART=0

    Maybe you should check this!

  • WLAN on Tecra 9100 - LED should go orange if the s/w keyboard shortcut NOT installed?

    I bought a Tecra 9100 that had been restored to XP SP1 and without good Toshiba utilities that most drivers seemed to be OK - for example screen OK but USB has been 1.1 until I added the Intel Chipset drivers.

    I can't get the WLAN card to work by sliding the switch (close microphone) - also, it does NOT appear in Device Manager. I spotted a post below (which was locked) where Pedro said WiFi hotkey software must be installed to make it work. Two questions:

    1 if the s/w keyboard shortcut IS NOT installed should always be able to mount the light Orange / appear in Device Manager
    2. is there an alternate download site because I tried 20 times in the last 15 hours at: http://support.toshiba-tro.de/tedd-files2/0/cmod-en-20070925121500.zip (for the common modules) and the site just seems to be 'dead' - nothing is received at all

    Thank you very much in advance - I want to become a happy member of Tosh' club... Cheers, Brian R.

    PS; The Tecra has a WiFi tag on the bottom and even a MAC address and I have not yet looked for nothing changed so much material.

    Pedro post follows:
    + Hello +.

    + Is the map original WLAN or you have upgraded on your own? What is with Device Manager, this is the card of wireless network which are listed there? +

    + For the use of WLAN, there are few requirements: +.
    + WLAN switch must not be broken or defective.
    + Wireless network card must be compatible one.
    + The WLAN antenna must be connected correctly.
    + Wireless network card must be installed properly (the right driver must be installed) +.
    + Wireless network card must be enabled in the Device Manager.
    + Wireless network card must be activated using the FN + F8 key combination (Wireless Hotkey V2.0.0.1 must be preinstalled) +.

    (1) first you should check if there is a yellow exclamation (unknown device) in device under network adapter Manager.
    If you find any unknown devices in the network adapter section then your laptop was not equipped with WLan minPCI card!
    The shortcut key has nothing to do with the WLan card status in Device Manager! The keyboard shortcut software only controls the function FN + F8.

    (2) don t know what you mean! The functions of link!

  • HP 15r-250tu: cannot install the drivers for the new laptop

    Hi expert, I bought a new laptop from hp 15r-250tu. I installed windows 7 ultimate (64-bit) service Pack 1. Cannot install the drivers for my laptop.i IAM downloaded all the drivers available on the site of hp for this model laptop.i tried to install them in the order as the mentioned error messages, but get that my phone does not support these drivers. Please answer me with links of driver and sequence to install. Thank you.

    Hello:

    Use the W7 x 64 drivers for the HP 250 G2 on your model except file BIOS, firmware, wireless and bluetooth.

    http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5449369&swLangOid=8&swEnvOid=4059

    Wireless:

    http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827&swItemId=ob_149229_1&swEnvOid=4058

    Bluetooth:

    http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_149791_1

  • Cannot install the disc existing Outlook 2003 to new Dell with windows 7.

    Cannot install the disc existing Outlook 2003 to new Dell with windows 7.
    Cannot copy old file .exe that runs on windows xp.  does not open.

    Site MS says compatible with OUtlook 2003 IS-

    That is what it is?

    Windows Update has nothing to with the upgrade of Windows. Please repost your question in the support forum: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and the second time error code 8007000D

    In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and error code 8007000D twice. How can you help me solve this problem

    0X8007000D ERROR_INVALID_DATA

    Try to manually download the update and installation
    http://www.Microsoft.com/downloads/en/results.aspx?FREETEXT=KB972145&displaylang=en&sType=s_basic

    It will not appear in your history after a manual installation, but it will show the updates installed in view area. TaurArian [MVP] 2005-2010 - Update Services

  • Cannot install the update error Code Ox800B010B

    Original title: cannot install the update

    Cannot install the update KB2686827

    Error Code Ox800B010B

    Hello

    1 have had any changes made on the computer before the show?

    2. What is the full and exact error message?

    3. when exactly you get the error message?

    4. the problem occurs for all the updates?

    Method 1:

    I suggest that return you the item and run Microsoft fix:

    Diagnose and automatically fix common problems with Windows Update

    http://support.Microsoft.com/mats/windows_update/

    Method 2:

    Test the problem in clean boot mode.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

Maybe you are looking for

  • How to reset a password on the computer 2000 on hp laptop

    All of a sudden my pc will not boot and asks me to enter a password at startup upward. I am now getting a system off number of 62159071. Can anyone help?

  • Sort by flags in Mail 9.1 does not

    I used intensively flags to help me separate emails for different projects. It worked well in Mail 5.3 on my old Mac Pro, but on my new Mac with El Capitan (Mail 9.1 - 3096.5), sorting by the indicator does not work. I don't see a model to order the

  • PC on a Windows 2000 wired network do not receive internet, but Macs are.

    I uninstalled my NIC in Windows 2000 to try to fix a problem. When I rebooted, I get internet on my server, or my PC Windows XP, but I get internet on my Mac. I have Cox cable internet and a Belkin wireless router.  The wireless signal is fine, but m

  • No wifi, Internet or bluetooth

    I'm running a 3520 Inspiron with windows 7 Home premium. I stopped it and when I re started it I have no wifi or Bluetooth. I tried hard wiring for the modem and still nothing. I went to the Device Manager and there is a yellow flag next to Dell Wire

  • How to bring back my digital version of Windows 8?

    I had Windows 8 for promotion using get for $15. Well, I recently had a problem with my computer and had to do a factory reset the game my OS back to Windows 7, which came on the PC. Is it possible to re-download the software Windows 8 on my PC? I ke