NB200-10Z starts but the screen is blank

Similar Questions

• Satellite A300 starts but the screen is blank

  My laptop Satellite A300 broke down after opening a zip file, I think it was called flash microsoft.

  The laptop starts but the screen is blank.

  Any ideas?

  You see anything on the screen when you start button / stop?
  See Toshiba welcome screen?

• G7-1070us Pavilion: laptop starts but the screen is intermittent

  laptop starts up ok and the display is available on the external monitor or a hdmi to the tv. turn top display backlight lights up but the screen is blank.

  Hello:
  
  Yes, it was what I thought. I do not understand how the same pilot worked as a temporary solution.
  
  Decide for yourself after you have identified the cause of the problem. If it's just a matter of cable, I think it's worth repair. Otherwise, I have no idea, maybe it'd cost you big.
  
  Give it to get it repaired in a good local computer shop.
  
  Concerning
  
  Visruth

• Satellite Pro L300-21F does not start and the screen remains blank

  L300-21F is aged 18 months, so out of warranty. When you press the power button, you can hear the fan and a "click" but the hard drive does not start and the screen remains blank. The power and the battery on the headlight LEDs, but the switch light does not work. I checked the power supply and it is 19.3V and substituted a good known. Removed the battery, tried with just the power cord and still nothing. Pressing ESC or F2 when you press the button power does not bring to the top of the screen of the bios or any other message. I have concluded there is no power the jury. A friend he had its technology take a look and he concluded Council is probably a friend.

  So my questions are:
  1. He's probably right?
  2. is it a common problem with an easy solution?
  3. what else can do before shelling out for a new Board of Directors?
  4. is there a link where I can find how to disassemble the case?

  Any help appreciated

  Hello

  > 1. He's probably right?

  Yes, it looks like motherboard failure

  > 2. Is this a common problem with an easy solution?

  If it's a motherboard problem, the whole motherboard is replaced. Quite expensive part...

  > 3. What else can do before shelling out for a new Board of Directors?

  I don't think you can do anything with fried mobo

  > 4. Is there a link where I can find how to disassemble the case?

  Take a look at the site called irisvista.com

• Qosmio X 770 turns on but the screen remains blank

  So my Qosmio X 770 turns on but the screen remains blank, it was randomly turning every so often, but now it is just blank.

  The hd works fine again, I tried to plug it into a TV to see if it works, but no signal is found. I was informed by a friend that it could be a problem with the graphics card, I wonder if it can simply be exchanged if I buy a new one or if he joined, and I have to replace the whole motherboard?

  Any help would be appreciated.

  Even if the HARD drive is faulty, the laptop should be able to IT and you should see the home Toshiba on the internal display screen.
  If its definitely NOT drive HARD problem.

  You said that you have connected the laptop to the TV. You see the start of Toshiba on the external monitor (TV) screen? Are you able to access the BIOS by pressing F2?

  If this is not the case, there is certainly a hardware problem.
  It could be a fault of memory modules, graphics card or the same motherboard malfunction could be possible.

  GPU problems or the motherboard, the whole motherboard must be replaced and that's expensive fix because mobo belongs more expensive laptop.

• Satellite L40 is power on but the screen is blank

  Can someone help me with a problem?

  I'm not a computer expert and my laptop won't do anything. If I put power turns on but the screen remains blank

  Hello

  Try this:
  -Remove the battery and unplug the AC adapter from the portable computer
  -wait for about ~ 40 min and reconnect the two parts
  -then try to turn on the laptop

  If this does not work and the laptop does not start in windows OS, then you could try to insert a bootable recovery disk Toshiba and could attempt to reinstall new OS.

  If the procedure still does not have a hardware malfunction is possible, and in this case only the authorized service provider would be able to help.

  Good luck

• dv7 work, but the screen is blank

  I had my dv7-4180us for a month.

  The screen just deleted one day... the backlight of the lcd screen is turned on, and when I connect to an external monitor it show that the laptop itself works very well.

  When booting the laptop, the screen flickers when the hp logo comes on with the 'Starting Windows' screen (it flashes briefly and remains off even when you press F8 to access the BIOS screen). A cursor then comes to the screen (with the circle "busy" thing), for approximately 2 seconds, during which the display IS stable. Then that's it. You hear the sound when the logon screen is supposed to appear, and also when Windows actually loads. Occasionally, it sparkles, but the screen remains blank with the LCD backlight on. Fan comes on intermittently, as usual, all lights are functioning normally.

  Once she nomalised by itself for about 2 days, then deleted again. Windows restore did not work. The only support of HP said something had to perform a recovery, as it could be a windows problem. But it won't have the same BIOS display!

  Help!

  Hi again sent to the laptop to hp. came back, with the display now works correctly.
  On the worksheet they have ticked 'View' and 'Cable '. So, it is obviously a cable problem.

  Thank you all.

• I had checked "extend my desktop to this monitor". I have only 1 monitor though. Now the screen is empty. I rebooted the pc in the hope to go in safe mode but the screen remained blank.__How can I go back to single screen? __

  I had checked "extend my desktop to this monitor". I have only 1 monitor though. Now the screen is empty. I rebooted the pc in the hope to go in safe mode but the screen remains blank.
  How can I go back to single screen?

  Hi Bilipino,

  You have more than one display card? Try to connect your monitor to the another card and see if you can get the display.

  Reference: http://www.microsoft.com/windowsxp/using/setup/hwandprograms/monitors.mspx

  I hope this helps...

• Re: Satellite A300-21I trying to start but the screen does not light upward

  I have a laptop Toshiba Satellite A300-21I 15.4-inch around the age of 2 months.
  He walks yesterday and received a message (very short)-initialization failed, see the event log.

  Laptop computer tries to start but the display does not illuminate.
  No prior problems.

  The indices of anyone?
  Stanley

  Hello

  You are able to access the BIOS?
  You see a Toshiba start screen that usually appears at the beginning?

  What happens if you press F8 at the beginning of the boot process?

  Please provide more details!

• my phone has sound but the screen is blank

  I made a phone call. I can hear people talk but may the screen is blank and I cannot complete the call. What should I do?

  You can hang up with the sleep/wake button. Then try to force the phone reboot now buy the button sleep/wake and home for 10-15 seconds. -AJ

• Dell computer laptop starts but the screen does not light

  Hello

  I have a laptop Dell older (studio 1558) and when I used it the other day, 'static' filled monitor image and then the screen went completely black.  Now when I turn it on, it seems that the computer starts well but the screen is black.

  Get yourself an external monitor, easy solution, right? -bad.  Unfortunately when I plugged my laptop in a separate monitor, the monitor (which works fine) showed no images.

  Still, I had this laptop for a few years.  I see about being 'easy' opening and closing of the laptop.  This has been the case in recent years, however, so I don't know if something has finally given...

  I'm not the best computer savvy so sorry if I was not more detailed... any ideas, what is wrong and how do I fix?  I rather would not somewhere that make me fixed.

  You will probably get a better response if you re - post it in the forum of the laptop and mention the version of Windows, too. (This is the forum office.)

• BlackBerry phone Q5 looks like it is on, but the screen is blank

  My Q5 dropped on the floor, and now it seems that it vibrates and flashes when I receive messages and phone calls, but the screen is completely blank... Does anyone know how to fix this?

  you have either broken something or something fell off

  I did take a part yet, but there are some top youtube vids if you want to see if it could be something loose

• Satellite A300 - system still works, but the screen is blank

  Hello

  I was downloading an update of tempro toshiba (synco or something in that sense) for my laptop Satellite A300 and the frozen screen. I pressed the power button for 5-10 seconds until it is turned off. When I turned it the system seemed to work but the screen is completely black.

  I tried to remove the battery, and fn + F5 but the screen still won't turn on.

  Any help or advice would be appreciated.

  Rob.

  Hello

  It happened because of the updated BIOS, or during the common software update?
  In case it was an update of the BIOS I recommend contact the ASP in your country, because it seems that the ROM module must be flashed again.

  If it happened during a common software update, so I advise to remove the battery and the AC adapter and wait an hour.
  Then reconnect the two parts and check to see if you could power the laptop properly!

  Check it out!

• HP Pavilion g7-1261nr turns on but the screen remains blank

  I turned on my HP Pavilion g7-1261nr the other day, and the fan ran hard, as well as the caps lock and number lock LED flashes once every two seconds. The screen remains blank during the process. Could someone help me with this problem please?

  PcMatic I invite you to read the links provided, because they are there to help.

  If you entered my link, you would have seen this:

  Caps Lock/Num Lock LED component tested error Condition

  LED flashes 1 time CPU CPU not functional

  2 times for BIOS BIOS corruption failure LEDs blinking

  LED flashes 3 times non-functional Memory Module error

  LED flashes 4 times Graphics Graphics controller not functional

  Map of 5 times the system board failure system general LEDs flashing

  Authentication failed for the BIOS BIOS 6 times blinking of the LEDs

  According to the times that they blink, of what I mean, it's once and then a pause. Which would indicate that the CPU is broken.

  Only a repair can fix that.

• tx2550ee starts but the screen is black after some time

  Hello

  I have pavilion tx2550ee and for a month only, it displays strange problem

  the problem:

  some time after reboot that he didn't watch anything, but windows is loaded and I hear the sound and everything is ok, but since the boot until windows is loaded, the screen is black I try to change the battery, working directly with the adapter, but nothing has changed! the screen is always black

  I leave a few time approx. 30 min it works and the display shows each thing and its ok!

  I don't know why I should leave some time at the screen to work?

  In brief

  the Tablet is booting and windows is loaded but the screen is black but after 30 minutes, it works well

  
  

  any idea?

  Thanks in advance.

  For this device, the BIOS has been certified for Windows 7 and Windows Vista only. (If you should be able to Flash the BIOS on Windows XP too, I would not recommed it).