NB550D - no internet connection after instalation of Win 7 64 bit

Similar Questions

• interruption of the internet connection after installing vista sp2, only a local network

  Hello
  Since I installed vista sp2 last week, I have no internet connection. Just, my laptop connects to the local network. I had already tried to uninstall sp2, but this does not resolve the issue. A restore of the system has not been successful (do not know why, windows just said failure of system restore). I also deleted my antivirus program and my firewall...
  The internet works occasionally for a short time and when I start in safe mode.
  Because I live in a House that I have to use a fix ip, gateway and dns. After you install sp2, windows says my default gateway does not match my ip address and subnet mask when I change the properties of TCP/IPv4. Using another laptop with XP, the internet connection works with the same settings.
  I would be grateful for a quick solution, without formatting ;)

  I've highlighted the TCP/IPv6 line of course ;) the button was inactive when even
  in the registry, I saw WHAT TCP/IPv6 is already disabled

  my internet actually works, but I don't know why
  I deleted the file DisabledComponets for TCP/IPv6 in the registry, rebooted, create one, rebooted and it worked
  but I do not know why :)
  I hope that my internet is still functional

  Thank you for your support
  concerning

• No internet connection after installing the update of security for Windows Vista

  Security updates for Windows Vista released October 13, 2009 and November 10, 2009 still an Internet connection limited Connectivity/No. Did not help uninstall updates. To do the system restore to solve the problem. Why is this?

  drusecord,
  First thing is to update your network drivers for your system.  Then see if after the update of safety, you have a problem.  If you do, I would do the following:

  Disk error checking

  System File Checker

  Then if there are updates that you already have, but are always available to consult this information:

  Troubleshooting Windows Update: offered on several occasions to update

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Internet connection after installing vista

  I changed the hard drive of my labtop. Then I installed a vista business on my labtop but it can not connect to the internet. I tried this way:

  Control Panel, network and internet, set up a connection or network, connect to the internet.

  But this message: 'Windows doesn't detect any network hardware. "

  Please let me know how this windows vista able to recognize my internet connection which I use through my rotor for other computers. It cannot detect my wireless also. I wasn't expecting such a problem with vista before starting the real work.

  Hello

  Using another computer / laptop go to the website of the manufacturer of your laptop > search for a driver and software download section > key in your laptop model munber > look for the Vista operating system to the correct address > find drivers for it > download and save to a Flash Drive > transfer and install them in this laptop.

  If the manufacturer of the laptop has no Vista driver available for this model of laptop, we can not help you.

  See you soon.

• No Internet connection after installing Windows 7

  I have the same problem as others with Windows Media Center AND IE 8, no internet connection. It works find with Firefox and Safari, but I can't get internet connectivity with IE 8, Windows Media Center, and Realplayer. It worked fine before 'redevelopment' of W7.

  See http://social.answers.microsoft.com/Forums/en-US/w7network/thread/e0e0d320-b6d1-4239-a6f6-afbe47072332 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Could not get an internet connection after installed antivirus software.

  I tried to install a software antivirus (Vipre) and it asks to restart the computer, and I did. When I restart the computer, the software could not continue for a reason, and I found that the computer could not get the connection with internet ("limited access"). While my other computers are still good connections with internet (wifi). Please tell us how to solve this problem. Thank you.

  Hello

  1. are you able to surf the internet?

  2. you use Internet Explorer browser to surf the internet? If so, which version?

  Let us try the following and see if they help.

  Method 1: See the following article:

  Using the troubleshooter from network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2: Uninstall and reinstall wireless card driver and see if that helps.

  See the following steps:

  (a) click Start, right click on computer.

  (b) click on properties, click on Device Manager

  (c) expand the network card, right-click the wireless adapter option

  (d) click on uninstall

  (e) now go to your computer/wireless device manufacturer's website, download the updated drivers and install them.

  Reference:

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3: You can also try uninstalling the anti-virus Viper software and see if that helps.

  Reference:

  Uninstall or change a program:

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

• Vista 32 bit loses the internet connection after about 10-15 minutes.

  I lose my internet connection after 10-15 minutes.

  The message says local access only.

  The only way to reconnect is to restart the computer.

  I use a devolo home plug network system. It is connected to a 210 of BT router travel.

  I also have a new computer recently bought and installed Windows 7. There is no problem with that.

  Maybe it's a coincidence, but the problem started only since the installation of the new model.

  
  

  Hello Cody C.

  Thanks for your reply. I tried this. It is said that the drivers are up to date.

  I go into the settings of power network and checked the box "turn off network card to save energy.

  Since that seems to be OK. Only time will tell if.

  Thanks a lot for all the replies. EXTED

• Where to find a version of service pack 1 xp this need does not have an internet connection to install?

  service pack 1 xp

  Where to find a version of service pack 1 xp this need does not have an internet connection to install?

  The only version I know is the "broken" here:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=19751
  As is the case, assume that you can't get it.
  Why do you think you need? Were you running just a Clean Install? Or you are planning to do this? (And if so, why? It is VERY rarely necessary!)

• I lost the internet connection after acceptance of your latest updates. How can I cancel the updates?

  I lost the internet connection after acceptance of your latest updates. How can I cancel the updates?

  Debbie

  How do you know that the loss of your internet connection has nothing to do with the Windows updates? You must find the reason for the loss of the connection.

  How do you connect? Is a wired or wireless with a modem or a router? If a router is the router shared with another computer and this computer can connect to the internet? You need to determine if the problem is a fault on your computer or a failure to connect to your internet access provider?

  What error messages are reported?

  Event Viewer reports

  1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

  2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.

  3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, right click and select filter current log. Check the front of the error and click OK and see you only reports errors. Click the Date and time column header to sort. You may need to click a second time to see the last report above.

  4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. Select the Details tab and check the box in front of the XML view. Click the copy button to place a copy in the Clipboard and close Event Viewer. Now start your message and paste it into the body of the message. Make sure that it is the first dough right out of the event viewer.

  5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

  6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

  7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.

• A new system with a clean install of Win 7 64 bit Pro. Try to install win XP virtual machine.

  A new system with a clean install of Win 7 64 bit Pro.  Try to install win XP virtual machine. The virtual machine "put" file installs and then restarts.  During the configuration phase it reboots it gets 94% done gives a message 'update failed' and said that no files have been modified.  I redownlaoded the file and reinstalled several times.  I changed the bios to make sure that hardware virtualization is enabled.  All tests that microsft has said that my Machine is fine.  However I can not get the software\update of the virtual machine in order to install properly.  Any thoughts?  Thanks in advance.  Bruce

  Hi Bruce,.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

   

  Hope this information helps.

• Satellite L450D - 11G - no internet connection after reinstalling Win 7

  I just installed win 7 pro 64-bit so I can increase the RAM up.
  Initially I had win 7 Home premium SP1.

  I have a Toshiba satellite L450D - 11G PSLY5E.
  I downloaded all the drivers from Toshiba on a memory stick from a source different and then installed on the Toshiba.

  Then, I opened all the drivers one by one and ran each driver individually.
  In Device manager there is a yellow exclamation next to the network controller.

  I have a home network setup that I can connect to the net using phones, tablets and other portable computers.
  The icon on the laptop says NO CONNECTION, NOT of CONNECTIONS AVAILABLE.

  Y at - it a special order to install the drivers. I have install in the order in which they were downloaded.

  Any ideas anyone. TA

  In Device manager there is a yellow exclamation next to the network controller.

  Probably the essential WLan/LAN drivers are not installed properly.
  Do you have problems with the internet connection using WLAN and LAN?

  I recommend you to check if the correct drivers have been installed.

  The wireless network card should be Realtek RTL8191SE 802.11bgn

  Built in LAN module is published also by Realtek...

  so in both cases you need a Realtek drivers

• Portege R830 - problems of 3G connection after installing Win 7 32 bit

  Hello

  I went down a Portege R830 Windows 7 64 bit for Windows 7 32 bit with drivers of Toshiba. I put a SIM from my provider.
  In the windows Network Manager, 7 and in the Toshiba Wireless Manager I can see the right provider and HSPA network but when I start the connection, it does not (I don't have a PIN code).

  It is failed with Windows 7 Network Manager and Manager Toshiba wireless (I don't have this problem with the Portege R700 windows 7 32bits)

  But I found a small solution (but I think that's not enough):
  I have created a dial-up connection, with a number * 99 #,.
  I started the connection, it does not happen, but after that, when I raise my first connection is good.

  I don't know why, it's as if the modem is in sleep and the dial-up connection wake-up the modem, because after all is good (win7 Network Manager, Manager wireless Toshiba) so if I reboot the Portege.

  I want to avoid the dial-up connection on my r700 portege with 32-bit windows 7

  Thanks for your help and sorry for my English.
  support for the toshiba told me to reinstall windows 7 64 bit to solve the problem :)

  Hello

  Are you sure that you have correctly configured the connection?
  Here is a nice FAQ that explains step by step how to connect 3G using the Toshiba Wireless Manager:

  + How to configure and set up a 3G connection via the preinstalled Toshiba Wireless Manager +.
  http://APS2.toshiba-tro.de/KB0/FAQ1A037W0000R01.htm

  and here you can find instruction how to create dial upward of connection using own configuration of Windows.

  + How to create a Dial-Up connection with 3 +.
  http://APS2.toshiba-tro.de/KB0/HTD9802OF0000R01.htm

  Recommend check them both!

• Problems of Internet connectivity after an upgrade to Windows 7

  At home I have 2 computers Presario laptops connected to the internet via a modem wireless router / the two using Vista Home Premium (32 bit) OS. Last week I upgraded to one of them to Windows 7 (32 bit) and since then, I had Internet connectivity problems. The other laptop, always on Vista, continues to work with no problems and so I excluded the modem/router wireless as the source of the problem.

  The problem is that when all programs that access the Internet, for example Internet explorer, Mozilla Firefox, Microsoft Outlook and MS Instant messenger, lose the connection to the internet after a few minutes. I disconnect them the laptop to the wireless network and reconnect again manually, then works again for a few minutes and the problem repeats.  An interesting observation is that I use SKYPE (VOIP program) and it is Basel to connect to the internet and maintains the connection without problem.

  I suspect that the problem may be the driver for the hardware wireless (apparently made by Atheros communications) installed on the laptop, but I can't find more information on the subject.

  Any help on this problem will be greatly appreciated.

  Tony Partida

  {Information}

  Hi Tony,.

  It is certainly possible.

  Some people have managed to install this driver Atheros for Windows 7.  It is on the following link.  Save it to your desktop.

  Atheros Driver - Win 7

  The driver is in a zip file.  If you do not have an extraction utility installed, download and install 7-Zip.  Right-click on the downloaded zip file, select Extract 7 - Zip, select the files, and then click Ok.  Open the newly extracted folder, right-click on the Setup program and select "Run as Administrator" to launch the installation.  If it installs successfully, restart the computer and see if there is an improvement in connectivity.

  Kind regards

  DP - K

• Satellite P850 - no internet connection to help to win 8

  Can someone help me?
  I have just upgraded to Windows 8 on my Satellite P850 and now, according to what I'm trying to do, it is sometimes said that there is no Internet connection.

  I certainly link strong, because it works very well in the new application of Internet Explorer, Norton 360 and Windows itself. But it won't work in other things on the desktop, such as iTunes, the Toshiba Upgrade Wizard, Internet Explorer on the desktop, Safari etc.

  Why is this? Of course the most important thing is the Toshiba Upgrade Wizard, but that's not very far because she needs an Internet connection.

  Please help as soon as POSSIBLE. If you need additional information, let me know.

  Hello

  This happen using LAN or WLan?
  If you have problems with internet using WiFi, I recommend that you check the connection to the local network.

  In addition, you must make sure that your software installed and other affect t tools don with that 8 to win in some cases it could be a problem software that are not compatible with Win 8 preinstalled.

  I also see that you have Norton installed check if installed security tools don t affect the internet connection!

• Satellite C660 - no Internet connection after updating BIOS

  I am a novice user and have a Satellite C660 under warranty that I don't use for surfing the net and Ebay so I hope I can explain my problem!

  Toshiba bulletin board said that the need to update BIOS, so I followed the instructions but since then I have no internet connection, and cannot restore the connection that I lost all help Toshiba Bulletin Board today lost and none of the programs to sort the problems work - e.g.set assistants etc. I did not yet create rescue disks, but if I try to create them now I'll be able to restore to factory settings?

  Can someone tell me if it's a failure caused by the BIOS update or I would return laptop to John Lewis for repair? Thank you very much for reading this

  Hey Buddy,

  The default settings in the BIOS load after update? If this is not the case, go into the BIOS and load the default settings. You can enter the BIOS if you press F2 before Windows start and then press the F9 key to load defaults. Then save & exit the BIOS Setup.

  You can access the Internet now?
  You try to access the Internet with LAN or WLAN connection?

  Also check device manager if all devices are recognized correctly.

  > I did not yet create rescue disks, but if I try to create them now I'll be able to restore to factory settings?
  You can create the Toshiba Recovery disk every time. Just launch the pre-installed Toshiba Recovery Media Creator and follow the instructions on the screen. You need just a few blank DVDs to create the discs. Disks contain a factory image of settings which can be restored each time and how many times you want to so with these disks, you are on the safe side ;)