NEC baseUrl IDE-drive

Similar Questions

• Not detected at all IDE drives

  OK, because of my most recent thread, I was forced to pull a 3.5 "IDE HDD in my office in an enclosure for backup. The backup went perfectly, no damage detected in all. Then, I pulled the IDE cable in the Office for the CD player because he got in the way of the installation of the HD. I pulled by plastic, not the Ribbon. He slipped effortlessly, and the installation of what I had done several times previously worked perfectly. Until I started, that is. The computer has done is the automatic test sequence, but I noticed that the CD players and HARD disk are missing from the list of installed devices. I have no other devices, so I went into the BIOS to be sure. Synthesis system said, all IDE drives were "not installed". All cables are firmly in place, has not changed in the BIOS except the boot sequence. I need to install Windows on this HARD drive, I can not do because the CD player is also out. Help, please!

  Wow I feel stupid. Ribbon IDE frayed.

• Windows 7 cannot see is not my SCSI disks when I try to install. As the IDE drive is showen but is not usable.

  Windows 7 cannot see is not my SCSI disks when I try to install. As the IDE drive is showen but is not usable. Is there a FDISK program that can be run to solve this problem from a command promt?

  Hello

  You try to access BIOS and change the SCSI to IDE in the BIOS or Raid in IDE and try to install Windows 7.

  If it fails, contact your SCSI manufacturer for the latest drivers for your SCSI and install it by clicking on load drivers and try to install Windows 7.

  Hope this helps and works.

  Chris

• VI 3 virtual machine SCSI disk is changed on the IDE drive in vsphere 4

  Hi Experts,

  When the virtual machine SCSI disk is add to the Vsphere virtual machine, only the scsci disk 3 VI is replaced by the mode IDE drive can be added.

  How to solve it? Thank you.

  Add a SCSI controller on the virtual machine and then add the disk

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!

  -Josh

  Trying to learn

• A virtual XP Server of VMWare machine with an IDE drive can be converted into ESX?

  Running ESX 3.5 update 3 and VC 2.5 update 3 (converter plugin 4.0.2).

  I have a couple windows XP virtual machines running on an old VMWare Server 1.x. I want to move them to our ESX cluster. However, they were built with IDE drives. Is it possible somehow during the conversion into ESX to pass SCSI drives?

  Thank you

  Converter will do this automatically for you.

  Make sure that you have a backup in the first place, in case something goes wrong.

• Portege 30xx Win2K - need to bus master IDE driver

  Hello!

  Could not find the driver, tried all the sites of Toshiba. The works of 10 times slower than expected :(hard drive

  Help, please. Thank you.

  Best regards
  Vitaly

  Hello

  Why are you suggesting that the HARD disk works 10 times slower than expected? Did you use the 3rd party diagnostic software?
  Usually to the IDE of rally driver must be installed during the operating system installation procedure to install Windows. So I think tat you will find any driver IDE master bus on the Toshiba site.

  Good bye

• Re: Qosmio X 500 - USB IDE drive not visible external HARD

  Hello

  Someone was kind enough to educate myself on this problem?

  How to view the contents of an IDE hard drive connected to the USB port on my Qosmio X 500?

  -The drive is already formatted and filled with data
  -LED lights on the outer box, but the disc is not visible in the browser...

  I got my old laptop internal hard drive and I bought a box to be able to connect to the USB port on my Qosmio in order to get my data...
  What is the problem?

  The hard drive come from 32-bit Windows XP and Qosmio with seven 64-bit...

  I need to install a special driver? use a specific software? or configure specific settings?

  Thank you...

  > What is the problem?
  Who knows? If other discs hard USB can be connected properly to the Qosmio laptop, the problem might be related to the connected HARD drive.
  So I recommend this external USB with other computers.
  If the other computers will not recognize it, so the external HARD disk is a problem

  > additional power supply is probably necessary for a HARD drive
  Maybe my HDD USB requires a cable that can be connected to the two USB ports

• Transfer of data from IDE drive to SATA Drive

  I have an old HP PC with an IDE hard drive, running windows XP.  I want to transfer data from hard drive to a newer HP Pavilion computer on windows Vista. Need instructions on how to transfer the data and what toos hardware and software are needed.

  Details of the recent PC (target PC) are:

  Type of hard disk: SATA.

  Model - A6160e CTO desktop PC / product nbr - gg754av / serial number MXG73501SZ.

  More old HP Pavilion PC:

  Hard disk type: IDE

  Preponderance of details:-cannot read the label! (about 7-10 years) [old and gray - sound like me!]

  Thank you all

  NY11563

  E-mail: [email protected]

  Hello

  There are limited resources,

  (a) use Data transmission cable, something like one of the following thread:

  http://au.price-selector.com/search?k=easy%20transfer%20cable & cid = 1-3-1-1-3

  (b) another option: buy an IDE HARD drive case and put the old HDD on it, you can transfer data and use it as a HARD drive external.

  Kind regards.

• HP-P7-1490 and IDE drives

  Is it possible to install a HDD IDE and IDE CD-ROM/DVD-ROM drive in this machine with SATA drives?  Is there an IDE port?

  Hello

  His mother was:

  Internal connectors

• Setting up RAID on pair of internal IDE drives in a Dimension 2400

  I will first say that I do not know if this is possible.

  I have an old 2400 dimension which came with one hard disk of 40 GB. I want to buy a pair of larger disks to put in it and wonder if it's possible for me to create the pair with RAID-1 mirror, even if it would have the top OS? Ultimately, I want to set up multiple partitions and set it to dual-boot Windows and Linux flavor still to be decided.  I don't know yet what readers are compatible with this machine. I am hunting for the specifications for it. I will need to create a recovery media to preserve the Windows XP operating system, the machine was not provided with media.

  Someone on this forum has successfully completed what I'm doing? If you have any suggestions or can tell me all the good links online, it would be more helpful as I am still learning what I need to do to make this happen all. A link to the material sheet Dimension 2400 or compatible drives list would be welcome.

  Feel free to me blowing my lack of knowledge on this, but we must start somewhere and ask questions to find out what they don't know.

  Thanks in advance,

  The BIOS and the IDE controller integrated into the Dimension 2400 will not support RAID.  However, you can add a RAID PCI controller card that accepts SATA drives.  The SYBA-150R comes to mind for example, but a search of RAID PCI controller will be to others.

  The Dimension 2400 is a bit old for this sort of thing, unless you use it as a learning tool.  You might be better off looking for a somewhat newer machine, like a Dimension 9100, already a capable SATA controller for RAID.

  The incorporation of other operating systems is not a problem, provided that the selected OS has a compatible with the RAID controller mass storage driver.  When a RAID volume is established, the operating system simply treats it as if it were a single hard drive; individual readers are invisible.

  For more information on the Dimension 2400, see the following: Dimension 2400 manual repair

• SATA to IDE drive hard converter

  Hello

  I need to transfer the hard drive to a Dell E510 Dim in a Dim of Dell 4400.  The hard drive in the E510 (Samsung 80 GB, 7200 RPM, model HD080HJ/P) is equipped with SATA power and data connectors.  The 4400 Dell has IDE connectors for the hard drive that is currently installed.  Y at - it a type of converter that will allow me to install the SATA drive in the IDE machine and use the SATA drive as the secondary hard drive?

  Both machines are running Win XP.

  Thank you!

  
  

• tricking ESX 3.5i Installer for IDE drives

  Gents,

  I always forget which file I have to change to deceive the ESX 3.5i installer that the system has SCSI drives instead of IDE...

  Could someone help?

  Thank you!

  /usr/lib/VMware/Installer/core/TargetFilter.py

  http://www.vmadmin.co.uk/index.php/resources/35-esxserver/87-esxiide

  Andy, VMware Certified Professional (VCP), http://www.vmadmin.co.uk/

  If you have found this information useful please give points by using the buttons at the top of the page accordingly.

• I have a 'C' IDE drive failure I have a SATA drive connected via a PCI-SATA controller card. I want to change from hard disk IDE 'C' on the SATA drive. What are the steps to achieve this?

  Running Windows XP Home, I want to change hard drive as described above.

  As a result, I have a USB hard drive, which I copied the hard drive of the original 'C', before it fails altogether.

  Is it possible to copy this USB drive on my SATA hard drive and have as my primary hard drive?

  Keeping in mind of the SATA hard drive, connected via a PCI-SATA controller card.

  Unless your third sata card supports the option to boot from this map, its not going to work. Not all sata cards are bootable.

• Pavilion zv5000 - IDE adapter for HARD drive?

  I have a Pavilion zv5000 series portable whose hard drive died several years ago. My father sent him to a work friend, who understood that it was the HARD drive, and I guess that he threw the car with an adapter with it. I got an IDE drive, foolishly, assuming that the pins on the drive just fit into the connector on the laptop itself. After a lot of confusion as to why the player wouldn't be good, a research showed a card equipped with a regular at one end IDE connector and a connector similar to that on the laptop on the other. I ask if it is true that I need one, even if I do not otherwise so that it connects.

  Also, nines are isolated from the main pins on the drive. The old connector Molex had also four pins. These are the power pins, and the adapter address these too? It doesn't seem to be any other connector on the laptop. Once again, I want to just confirm this and no I have to not just buy the wrong thing for this laptop.

  Therefore the adapter that I'm looking for?

  Yes, I used to own a zv5000 and I can confirm there was a plastic connector black who went on the IDE brass pins on the hard drive to allow the connection to the motherboard.

  This is what you need:

  http://www.eBay.com/ITM/hard-drive-connector-for-HP-Pavilion-ZT3000-ZV5000-ZX5000-/200774656750?PT=US_Drive_Bay_Caddies&hash=item2ebf1a22ee

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Windows Server 2003 on the HARD IDE in Mode ATAPI drive?

  Hello!
  My problem is that I want to know if a HDD IDE will run in Mode ATAPI.

  More details >

  There is a motherboard of INTEL S5000 VSA server in the office. He already had Win 2003 and everything was fine until the HARD drive crashed and the people replaced by an a SCSI maintenance (I don't know if he had a SATA, SCSI or an IDE HDD previously). After installing new HARD drive, they were not able to install Win server 2003 and went for 2008. Windows Server 2008 creates problems for us and the maintenance people are also confused and unresponsive to the situation.

  We have Windows Server 2003 R2. The motherboard has only one IDE port but scored the "working mode" as ATAPI. I was wondering if I could just attach an IDE HDD and install Win Server 2003 R2 (since win 2003 supports SATA out-of-the-box)

  (Displayed in the section of WIN XP as Win 2003 sharing the same base with XP, XP users can comment too)

  http://www.Intel.com/CD/channel/reseller/APAC/Eng/products/server/boards/DP/S5000VSA/feature/index.htm#specifications

  If a geek myself, I'm not very educated when it comes to servers. a Google search also did not help. I would be grateful if someone can help out me.

  Thank you
  Chirag.

  Yes it will install and work fine on an IDE hard drive, ATAPI devices are all IDE drives.  The downside is that the reader will be much slower than the SCSI on a busy server, which can be a big disadvantage.

  For all its value that they probably could not install Server 2003 on the SCSI disk because they weren't using the method of F6 to provide drivers SCSI on a diskette or that they could not understand or how their wake worth installation CD.  There is no need of such a monumental lapse, notwithstanding the limitation INT-13 NT4 Server installed on SCSI and Server 2003 installs on SCSI providing that you give appropriate when installing drivers.

  John