NECESSARY COMPUTER ENGINEERING? LOL__ "Access denied" when I try to access my files on my external hard drive (NTFS).

Similar Questions

• "When I try to listen to music from my external hard drive, I get ' E: / Server execution failed"

  Original title: external Hard Drive music does not play

  When I try to listen to music from my external hard drive, I get ' E: / failure of execution of the server "what's?

  Hello
   
  (1) is specific to a specific folder?
  (2) did you of recent changes to the computer before the show?
  (3) what music player do you use?
   
  "E: / Server execution failed" is an error caused by a person who uses the incorrect proxy settings in windows, and windows media player and media center you will encounter errors on this.
   
  I suggest the following methods and check if it helps.
   
  Method 1:
  (a) open the network and sharing Center
  (b) go to network connections
  c) right click of your main connection method and click IPV4 settings
  (d) select Advanced settings, click on that and if you see any information other that automatically detect settings and then delete and check her automatically detect the settings box.
   
  Method 2: I suggest to refer to the following article and perform the steps mentioned by Vivian Xing and check if it helps. http://social.technet.Microsoft.com/forums/en/w7itpromedia/thread/f690ff23-C486-47e7-ACD4-ee6187613ae8

  Warning to be upgraded on the spot: take the backup of all your files of important data before performing the upgrade on the spot.

• Seeking help with a problem with the LR I use LR CC on a laptop, when you try to export a picture to an external hard drive, I am now without apparent reason to get the following message, "could not create a JPEG sponsor limit you 92 k Bytes.Plea.

  Seeking help with a problem with the LR

  
  

  I use LR CC on a laptop, when you try to export a picture to an external hard drive, I am now without apparent reason to get the following message.

  "Could not create a respondent JPEG limit you 92 k Bytes.Please increase the size limit files
  . (1).
  .....

  I tried to increase the size of the file several times,

  I left LR

  I restarted the computer.

  
  

  Any help or advice for this problem will be greatly appreciated

  
  

  Thanks in advance

  
  

  @stu

  Not because of the number of pixels, in this photo and the chosen level of quality there is no possible way to create a JPG file to the size of file you requested. You must change your export settings.

  Show us a copy of the export dialog box, so we can see clearly the part file setting and the size of the Image.

  Also indicate the number of this image (width and height) pixels after cropping (as appropriate) and prior to export.

• I can't access the files on my external hard drive suddenly...

  We just bought a new computer-everything is in order and I was just post some photos of my external hard drive to picasa. He said all of a sudden that I do not have access to view these photos (the disk hard ext..) I was wondering if someone can help me with this one?

  We just bought a new computer-everything is in order and I was just post some photos of my external hard drive to picasa. He said all of a sudden that I do not have access to view these photos (the disk hard ext..) I was wondering if someone can help me with this one?

  It still works on the old system?

  Are you actually getting a message that says, 'Access denied' and you just did not share that?

• I'm unable to access the files on my external hard drive

  I have an external hard drive and can't read the files. The device appears on my PC, but no file shows when I go to the device and equipment. My PC is not recover this unit and only not recognize it as a USB device. I can see this under the folder hardware and devices, but there is no entry. Is there a way to access the files or retrieve files? The material of the driver is up-to-date.

  Hello

  Try to connect the external hard drive on another computer / USB and check.

  If you are able to access the files on the other computer, and then try to update the drivers for the chipset of your computer.

  You can visit the website of the manufacturer of the computer to get the chipset drivers.

  Thank you.

• I have a problem with access to files on the external hard drive.

  Original title: property: no access to files on external hard drive

  Owner: I reinstalled my computer and was not the owner of my external hard drive more although settings say everyone could read and write. I took while at the same time to ensure that no one else could take ownership, windows did it the wrong way autour. How can I regain access to my files?

  Does anyone know the use of these property rights? Because I had to take possession, while the apparent of it use me was non-existent.

  You must enter the property of your records - see here:
  http://social.answers.Microsoft.com/forums/en-us/w7network/thread/24bdf172-2DBC-43b8-995d-a99b6a81413c/
  Deny access to files is a bad idea because it often has unexpected side effects. Is better only to include you in the "Green" list

• Error "0 x 80070091: the directory is not empty ' when I try to delete a folder on my external hard drive

  Original title:

  When I am trying to delete a folder on my external hard drive I get the error code following error 0 x 80070091: the directory is not empty

  Hello

  1. are you having the same problem even if you connect the external hard drive to another computer?

  2 have you made any changes to the computer, before the show?

   
  Method 1:
   
  Start your computer in safe mode and then try to delete the folder.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   
  Method 2:
   
  Appropriating the folder and then try to delete it.
  Appropriating a file or a folder

  http://TechNet.Microsoft.com/en-us/library/cc753659.aspx

   
  Note: The link above also applies to Windows Vista
   
  Method 3:
   
  Check the external hard drive to find errors.
  Check your hard drive for errors
  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Important: While performing the check disk on the hard disk, bad sectors are found and if he's trying to repair this area, all available data on the risk of being lost.

• Trying to access the files on an external hard drive in XP with Vista... Access denied.

  My old laptop with XP died, so I purchased an external drive and installed my old hard drive in it. I now use Vista, but whenever I try to access the files I get a message saying that I don't have permission to access the files. I spent in and changed the settings in files to reflect property, yet I always refused. I have read the discussions and met some people with the same questions, but proposed solutions seem to be more confusing than the problem itself.

  These files have been encrypted? If Yes and you did not save your encryption certificate/key, the files are lost forever. If the files are not encrypted (and you can do this natively in XP Home), then appropriate should do the trick. Again, here are the instructions:

  1. right click on the file or folder and then click Properties.
  2. click on the Security tab.
  3. under group or user names, click your name to see the permissions you have.

  To open a file, you must have the read permission. For more information about permissions, see what are permissions?

  http://tinyurl.com/2j9vgr

  To take ownership of a folder:

  1 right click on the folder you want to take control and then click Properties.
  2. click on the Security tab, click Advanced, and then click the owner tab.
  3. click on modify. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  4. click on the name of the person you want to give to the property.
  5. If you want this person to be the owner of the files and subfolders in this folder, select the Replace owner of subcontainers and objects to check.
  6. click on OK

  If after all this you may not always get the files, I just boot the system with a Linux Live CD or Live USB key and copy in Windows there because Linux does not respect ownership/permissions of Windows.

  You can create a USB bootable Linux instead of a bootable CD. This site will show you how, and it's very easy -http://www.pendrivelinux.com

  http://www.Knoppix.NET

  See also - http://lifehacker.com/5504531/the-complete-guide-to-saving-your-windows-system-with-a-thumb-drive
  http://www.howtogeek.com/HOWTO/17044/move-files-from-a-failing-PC-with-an-Ubuntu-Live-CD/
  https://help.Ubuntu.com/community/LiveCD and for future disaster recovery programs - http://www.elephantboycomputers.com/page2.html#Backing_Up

  MS - MVP - Elephant Boy computers - don't panic!

• I can't find my external hard drive under 'Computer' but it appears in "Devices and printers" How can I access files on my external hard drive?

  I can't find my external hard drive in "computer".

  I just bougth a new HP computer running Windows 7.  I just copied a bunch of movie files, music and photo of my old Mac (OSX Leopard) on a Western Digital external hard drive.

  I plugged the external drive in my HP via USB 2.0 on the front of the computer.  Windows recognizes the drive.  She appears in the Panel of external control/hardware and Sound/devices and printers as "HARD disk".

  It does not appear in 'Computer' under 'devices with removable storage ".

  I just want to get to my files so I can copy them to my new computer.  How to access my files on the external hard drive?  Why isn't he appear in 'computer '?

  Hello ShamedMonkey,

  Thank you for your message.  The problem you are having is because of differences in formatting between PC and Mac.  You can, however, transfer your files between the two.  I will set out what must be done under and limitations of each.
  First, you will need to format the drive on your PC.  When you format the PC, you can format it in FAT32 or NTFS.
  (You mentioned that you do not see the drive in the computer) To format drive:
  Click 'Start' > right click on 'Computer' > select 'manage '.
  Click on "disk management".
  In the right pane, you should see your drive > you can then do a right click and 'format '.
  FAT32:
  This format will allow you to easily transfer files between the two.  This format becomes problematic when you transfer files more than 4 G.  There is a limit of 4 GB in FAT32, etc. of many movies are bigger than that and cannot be transferred using this format.
  NTFS
  This format has no size limitation, however, in its normal state it will be 'Read only' on Mac.  If you will not be able to transfer all the data itself.  While doing some research on the web, it seems that you can use a program called MacFuse on your Mac to change to NTFS files.  I have not confirmed this, but you can give it a try.  If this program works as planned, it would be the way to go.
  Please let us know if it did or did not solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• How can I remove restrictions file from an external hard drive so I can view or access these files on any computer instead of just one file has first been created?

  I have an external hard drive that I loaded all my important files on all my computers. There is a file that I put in place restrictions to access, but it has been so long that I don't know how I did it or how to remove it. How can I remove restrictions file from an external hard drive so I can view or access these files on any computer instead of just one file has first been created? The computer that I created the folder of running Windows Vista. I am not able to access files in this folder from any other computer. It gives me the following error: "E:\School is not accessible. Access is denied. »

  Hi mango127,

  I suggest that you give all permissions for everyone on this folder and check if it works.

  "Access denied" error message when you try to open a folder

  http://support.Microsoft.com/kb/810881

  How to capture a file or a folder in Windows XP

  http://support.Microsoft.com/kb/308421

  If the previous step fails then I would suggest that you take the backup of this folder on the computer you were accessing and later to format the hard drive.

  How to use disk management to configure basic disks in Windows XP

  http://support.Microsoft.com/kb/309000

• My MacBook has closed, but I made backups using Time Machine. When I get a new computer, I'll be able to simply reinstall my Creative Suite Design of my external hard drive? It is as simple as plug in my external hard drive or do I

  My MacBook has closed, but I made backups using Time Machine. When I get a new computer, I'll be able to simply reinstall my Creative Suite Design of my external hard drive? Is it as simple as connect my external hard drive or do I need something else?

  Adobe applications must be installed using installation files.   The downloads are available

  Download and Installation Help-

  https://helpx.Adobe.com/download-install.html

  http://www.Adobe.com/downloads/other-downloads.html

• Cannot access the files from the internal hard drive that has been converted to drive external hard after the motherboard is dead

  I can't access the files from an internal hard drive that has been converted to drive external hard after the motherboard is dead. I think that my files are still there, as shown in the volume of the player volume ~ 500 gb which is almost completely full. But I can't access most files, including documents and settings. When I took 'ownership' of the folder, I could open the TI but then it showed everything that was in my documents and settings on the computer file I used to open it, not the documents of the car.

  I can't access the files from an internal hard drive that has been converted to drive external hard after the motherboard is dead. I think that my files are still there, as shown in the volume of the player volume ~ 500 gb which is almost completely full. But I can't access most files, including documents and settings. When I took 'ownership' of the folder, I could open the TI but then it showed everything that was in my documents and settings on the computer file I used to open it, not the documents of the car.

  Uhm... I think the issue here is a misunderstanding of what you watch.

  If you want to access your files from the old hard drive - you need to look in the right place.  If the old system was "Windows 7", "Documents and Settings" is the * wrong * place to look and "Users" would be the place to go.

  You * will * take ownership and change permissions on ALL (you want to propagate to all subfolders/files when do - to save time) in order to get them properly.

  New-->: Windows Vista/7 would have your files located in the directory 'Users' of the root of the drive - and then under your username.

  • \USERS\\Desktop\
  • \USERS\\Downloads\
  • \USERS\\Favorites\
  • \USERS\\Documents\
  • \USERS\\Music\
  • \USERS\\Pictures\
  • \USERS\\Videos\

  ... etc...

  Documents and settings to WIndows Vista/Windows 7 is a symbolic link and would lead to what you see if you tried to use it.

• When I try to copy a file to an external device using Windows Explorer I get the following error message: "cannot copy. The directory or file cannot be created. »

  original title: could not copy files

  When I try to copy a file to an external device using Windows Explorer I get the following error message: "cannot copy.  The directory or file cannot be created. "I understand that I may have the physical limit of USB keys for the root directory.  How can I fix it?

  Hi GloriaZF,

  What is the size of your external hard drive and what is the available free space? Open my computer-> right click on the external hard drive-> properties. You will not be able to copy more data if the disk is full, or who have less space compared to the size of the file you are trying to copy.

  You need to remove the order data to make the space more. Deleted data from the device USB will be permanently deleted and will not be stored in your Inbox, so take care while eliminating unnecessary data.

  I hope this helps.

• error 0 x 80070571 when of moving images from my mobile phone cards in a file on my external hard drive

  Original title: error 0 x 80070571 download of photos from my mobile phone this morning card and transfer them to a file on my external hard drive

  I was downloading pictures from my mobile phone card this morning and their transfer to a file on my external hard drive.  Whenever I tried, I got this error message.  I don't think this is the card for mobile phone I can transfer on my laptop.  How can I fix?  Sherill

  Hello

  1. don't you make changes to the system before the show?

  2. were you able to transfer before that?

  3. How do you connect the card to the PC?

  4 is confined to the transfer of images on external hard drive.

  5. what happens if you try to transfer the photos to the hard drive internal?

  Method 1: Perform a clean boot.

  To perform a clean boot and see if the problem still occurs, follow the steps in the below link.

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 7 in the link to your computer in normal mode.

  Method 2: Perform a disk check.

  Follow the link below and look for errors.

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Important: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk to be lost

  In addition, you can check out the link and check if it works.

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-get-pictures-from-my-camera-to-my-computer

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-get-pictures-from-my-camera-to-my-computer (Applies to Windows Vista)

  It will be useful.

• I try to use my Time Capsule as external hard drive. But when I look in the Finder, nothing is available for shared devices.

  I have a Macbook air running OS X El Capitan. I try to use my Time Capsule as external hard drive. But when I look in the Finder, nothing is available for shared devices. I don't know if I need to restart the time Capsule or change the wireless setting, etc. ?

  Please advise...

  The TC appears in airport utility? If not then it is probably not part of your network or is lost... upgrade installed you El Capo because there a lot of questions.

  What is the TC plugged into the network by ethernet? And configured properly? Are you to internet via the TC... but can not see his drive... that would be typical?

  Have you set Finder preferences to display the network drives? Apple keeps making it difficult for some unknown reason.

  You actually have to mount the drive TC if it appears under shared... it still may not appear if you double click on it. Under the search box on the top of the right hand you see Connect (As) box, type the name or IP address of the TC in there... Make sure that you save the password from your keychain.

  I try to use my Time Capsule as external hard drive

  For the storage of the files it is fine.

  For the execution of direct files for an application in the Mac, you are very likely to damage or corrupt the file at some point.

  And how do you do backups? Time Machine can't help you... it won't work.

  Backup is crucial, especially if you do things apple say not to do... That is to say move your photos or the iphoto library to the TC and try to use direct from there... expect any day to need a resumption of the library.