Need a hand set up FMS 4.5 to the HTTP output stream.
Hi people!
I am trying to install Flash Media Server (Streaming Server) and I have problems with the release of HTTP stream.
The system works very well with the ooutput Flash, but for some reason that the livepkgr will not work. Tried many things over the past two weeks, I went through the docs and I do not know anymopre what I can try... The source of the video stream is upstreamed to my own computer at home, via Flash Live Encoder.
, I run a dedicated server, that is running Windows Server 2008. The default web site is IIS. I have configured the ports so that port 80 is the default IIS inetpub/webroot, and installation of FMS 4.5 is accessible via port 8134. If the IP http://184.107.48.113 opens by default Windows IIS, and http://184.107.48.113:8134 takes the request of the FMS install.
The video stream is online on the Flash server, I can see it in the console, the livepkgr seems to work, and I see the. STREAM file that is generated in the folder livebroadcast/_definst_/livestream. If the server is running and the outputs of the process the HTTP.
I think that the URL should I use to access the HLS stream output is: http://184.107.48.113:8134/livepkgr/_definst_/livebroadcast/Livestream.F4M.m3u8
but it returns a file not found message. Is there something wrong with the syntax of URL? Or there is something else in the .conf files that I need to change? Or is it a problem with the configuration of Apache 2.2?
You can see the flow in direct of my web site Flash http://www.BlackFlag.TV I want to change this HTTP stream flow Flash.
Thanks for your help people!
-sv bell
Ok. Here are a few things I would like you to.
1. stop the publication.
2. go to the FMS applications folder and delete all uder applications/livepkgr/water courses and also delete the *.stream file.
3. now restart the publication.
4. create crossdomain.xml with the content below and place this xml code in your webroot.
http://www.Macromedia.com/XML/DTDs/cross-domain-policy.DTD">
5. now try playing the m3u8 via quicktime.
Tags: Adobe Media Server
Similar Questions
-
Need help to set up Time Capsule to extend the current U - pay Wi - Fi.
I am trying to extend my current Wi - Fi signal from AT + T U-Verse. I have a time capsule 1 TB and a Macbook Pro w/Retina Display. When I go in the most convenient airport Configuration it allows me to select "Extend a current network" but who is she won't let me go. The only option that it allows me to move forward with is to create a new network. I do not have the ability to plug directly into the router as I rent and do not have access to the actual router, just the Signal Wi - Fi. Please help with suggestions. I tried a factory with the time Capsule hard reset and still nothing. Thank you.
Sorry, but the time Capsule and other Apple routers will expand only wireless network that is provided by another router from Apple.
Another way of saying the same thing, it's that if you want to extend wireless network using an Apple product, you will need two of them... a close Uverse router/modem connected using Ethernet and set up to "create a wireless network"... and another airport located remotely to "extend a wireless network.
Since you say that you can not access the Uverse router, that will make things very difficult.
The only thing that peut work would be to add an AirPort Express and configure it to 'join' the Uverse wireless network. When she did this, it can then provide an Ethernet signal to the time Capsule, which in turn can be configured to provide your own private network. In other words, the AirPort Express would act as a wire-to - Ethernet without 'bridge' to ensure the Ethernet connection that requires time Capsule.
If you decide to try this, it would be a good idea to understand the return policy of the store on the AirPort Express before you buy. With unusual game like this, the only way you will know if it will work in your home is to try in your home.
-
Get and Set of dynamic Type via the Script output
I am running vRO 6.0.1. I built a dynamic type to Veeam. I can see the items in the inventory and can select them as attributes in workflows. I'm looking to get the dynamic Type via a script object and set it as a variable in the script output, but its does not work. I created the dynamic type using the type dynamic plug-in generator v2.
I have 'Veeam' namespace with types:
VeeamHost
jobFolder
job
I put an output with the 'DynamicTypes:Veeam.job' type attribute and the name jobOut
My script is just:
jobOut = Server.findForType ('DynamicTypes:Veeam.job' '29714267-f517-4f76-a621-902b3e789772/urn:veeam:Job:26eddcda-ea52-469b-b4c9-0b80fec098ae');
System.log ("Job found:" + jobOut "');
After the execution of the jobOut variable is empty. In the newspapers, I see:
Found job: DynamicWrapper (Instance): [DynamicTypesDynamicObject]-[class com.vmware.o11n.plugin.dynamictypes.model.DynamicObject] - VALUE: dynobj: [__ns:Veeam __id:29714267-f517-4f76-a621-902b3e789772/urn:veeam:Job:26eddcda-ea52-469b-b4c9-0b80fec098ae __tp:DynamicTypes:Veeam.job]
Does anyone have an idea of how complete the release of DynamicTypes:Veeam.job with the actual work of veeam I got via the script?
Could check you what happens if you replace the line
jobOut = Server.findForType("DynamicTypes:Veeam.job","29714267-f517-4f76-a621-902b3e789772/urn:veeam:Job:26eddcda-ea52-469b-b4c9-0b80fec098ae");
with
jobOut is DynamicTypesManager.getObject ("Veeam", "task", "29714267-f517-4f76-a621-902b3e789772/urn:veeam:Job:26eddcda-ea52-469b-b4c9-0b80fec098ae");.
-
I just reinstalled windows xp sevice pack 3 in my laptop. l need help to set up the wireless modem. My laptop is IBM ThinkPad and the modem is a construction in one. would appriciate ay help
Hi bardhiboris,
You can follow the steps from the link below: set up a wireless network:http://www.microsoft.com/windowsxp/using/networking/setup/wireless.mspx
Other links, please refer to: 10 tips to help improve your wireless network:http://www.microsoft.com/athome/setup/wirelesstips.aspx
To set up automatic wireless network configuration:http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/wlan_client_configure.mspx?mfr=true
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I need help to set up the linksys adsl router
Hello world!
I have LINKSYS WIRELESS - N HOME ADSL2 + MODEM ROUTER (wag120n) and I connect to the internet via the cable that I took my friend who already SPEEDTOCH ADSL ROUTER, I bought the d-link wireless card and I install it in one of my PC
what I need is to set up my linksys wireless router for my two PCs, on via the wireless and another an ethernet cable, how can I do?thanks4all
Follow this link to configure the router.
-
need help to set up Linksys printserver with verizon wifi hotspot
need help to set up Linksys printserver with verizon wifi hotspot
pfsjmhall,
Configure your wireless router to use these recommended wireless router settings, I use channel 11. I would use a new SSID to connect easier.
Then configure the Linksys print server. Find your network to give your passkey (password)
Then set up the printer, choose network and follow the instructions.
Rick
-
Need help with setting up in checkbox in interactive reports
I need help with setting up in checkbox in interactive reports, I use this statement a query
SELECT apex_item.checkbox
(
1, ROLEID,
'onchange = "spCheckChange (this);". ',
: F_ROLEID_LIST,.
':'
), del.
ROLEID, ROLEDESCRIPTION
OF EBA_ROLES
When I run it I get the following
< input type = "checkbox" name = "f01" value = "1" onchange = "spCheckChange (this); ' / > instead of the checkbox
Do I need to configure anything else
Aditya Gupta wrote:
I need help with setting up in checkbox in interactive reports, I use this statement a query
SELECT apex_item.checkbox
(
1, ROLEID,
'onchange = "spCheckChange (this);". ',
: F_ROLEID_LIST,.
':'
), del.
ROLEID, ROLEDESCRIPTION
OF EBA_ROLES
When I run it I get the following
instead of the checkbox
Do I need to configure anything else
This is one of the most frequently asked questions in this forum. Set the column attribute the text to display as Standard report column and not display text (special escape characters).
Always include the information referred to in these guidelines when you ask a question and if you use APEX 5.0, State, if you develop using the pages or the view of the component designer.
-
Oracle 11.2.0.2.0 StdEd 64-bit
Oracle Linux 5.3 64-bit
This question is probably in the cracks between SQL and linux shell scripting...
Given this piece of shell script (#! / bin/sh):
sqlplus sys/${syspw}@${srcdb s} as sysdba < < EOF
Set echo off feedback off verify wide head
Select log_mode from v$ database;
output
EXPRESSIONS OF FOLKLORE
#
{srclogmode ='sqlplus-s sys/${syspw}@${srcdb} as sysdba < < EOF1
Set echo off feedback off verify wide head
Select log_mode from v$ database;
output
EOF1'
echo log source mode is $srclogmode
output
the first behaves exactly as expected:
NOARCHIVELOG
But the second, by assigning the sqlplus output to a variable, the "echo" statement rpoduces
Source journal mode is select log_mode from v dupeactive dupeactive.save refresh_test_db report_oracle_inventory startem ERROR at line 1: ORA-04044: procedure, function, package or type is not allowed here
The 'dupeactive', 'dupeactive.save', etc., are the names of the files in the current directory.
?!?!?!?
You may need to switch using parentheses-dollar $ () to run commands shell instead of the old back-ticks. $ () Does not have this error.
View shell - what is the difference between $(stuff) and 'stuff'?-Unix & Linux change battery
-
Need examples and a reference link of combat in the setting of the project, videos and tutorials did not help me much more information.
Can you tell me or explain myself better. I'm new to using this new trial of DPS
Thank you
The option "Link reference" in the project settings can possibly be used for a link to an application from outside of the app, but it is currently not supported. You can learn more about this option and other parameters of the project here: Digital Publishing Solution help | Create projects
If you are looking for ways to create links to other articles, see the following: hyperlinks in 2015 of DPS.
Let us know if you have any other questions.
-Bob
-
Site to site VPN - need help to set up several tunnels
I currently have tunnels VPN site-to-site of two remote sites with 1720s to connect to an ASA5510 on my site TOWN_HALL. (see attached diagram)
It works well, but I want to add connectivity between the 1720-A LAN (172.20.3.0/24) and LAN 1720 - B (172.22.3.0/24). What is the best way to do it? The years 1720 can be configured with direct VPN L2L tunnels or that will affect the existing tunnels is the ASA5510? If so, I'm guessing that each 1720 will have to go through the ASA first.
Thank you.
Configs below:
ASA5510
ASA Version 7.2 (2)
!
names of
name 172.18.3.19 Postal Mail Server description
name 172.18.3.33 description Helpdesk Server helpdesk
DNS-guard
!
interface Ethernet0/0
Description link Comcast
nameif ComCast_Out
security-level 0
IP 29.92.14.73 255.255.255.248
!
interface Ethernet0/1
nameif inside
security-level 100
address 192.168.10.2 255.255.255.252
!
interface Ethernet0/2
security-level 0
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
nameif management
security-level 100
IP 10.10.10.1 255.255.255.0
management only
!
boot system Disk0: / asa722 - k8.bin
boot system Disk0: / asa706 - k8.bin
passive FTP mode
clock timezone IS - 5
clock to summer time EDT recurring
list of allowed incoming access extended ip any host 29.92.14.74
list of extended all inbound icmp permitted access all inaccessible
list of inbound icmp permitted access extended throughout entire echo response
list of allowed inbound tcp extended access any host 29.92.14.73 eq 3000
list of allowed inbound tcp extended access any newspaper SMTP host 29.92.14.73 eq
list of allowed inbound tcp extended access any host 29.92.14.73 eq www
list of allowed inbound tcp extended access any host 29.92.14.73 eq 3389
list of allowed inbound tcp extended access any host 29.92.14.73 eq pptp
list of allowed inbound tcp extended access any host 116.204.226.42 eq 3000
list of allowed inbound tcp extended access any host 116.204.226.42 eq smtp
list of allowed inbound tcp extended access any host 116.204.226.42 eq www
list of allowed inbound tcp extended access any host 116.204.226.42 eq 3389
list of allowed inbound tcp extended access any host 116.204.226.42 eq pptp
list of inbound note FTP Server access
list of allowed inbound tcp extended access any host 29.92.14.73 eq ftp
acl_out list extended access permit tcp host 29.92.14.73 any eq smtp
acl_out list extended access permit tcp host 192.168.1.4 any eq smtp
tcp extended access list acl_out deny any any eq smtp
access ip allowed any one extended list acl_out
121 extended access-list permit ip 192.168.10.0 255.255.255.0 192.168.20.0 255.255.255.0
IP 172.18.3.0 allow Access-list extended sheep 255.255.255.0 172.22.3.0 255.255.255.0
IP 172.18.3.0 allow Access-list extended sheep 255.255.255.0 172.20.3.0 255.255.255.0
access-list extended sheep allowed ip 192.168.1.0 255.255.255.0 172.22.3.0 255.255.255.0
access-list sheep extended ip 172.30.1.0 allow 255.255.255.0 172.31.255.0 255.255.255.0
access-list sheep extended ip 192.168.10.0 allow 255.255.255.252 172.31.255.0 255.255.255.0
IP 172.17.1.0 allow Access-list extended sheep 255.255.255.0 172.31.255.0 255.255.255.0
172.18.0.0 IP Access-list extended sheep 255.255.0.0 allow 172.31.255.0 255.255.255.0
IP 172.31.3.0 allow Access-list extended sheep 255.255.255.0 172.31.255.0 255.255.255.0
access-list sheep extended ip 192.168.0.0 allow 255.255.0.0 172.31.255.0 255.255.255.0
backup_access_out of access allowed any ip an extended list
outside_access_out of access allowed any ip an extended list
Note to access list outside_access_out Barracuda
outside_access_out list extended access permit tcp host 172.18.3.8 any eq smtp inactive
Comment from outside_access_out-access SMTP Block list
outside_access_out tcp extended access list deny any any eq smtp inactive
Note to access list schools SMTP inside_access_in
inside_access_in list extended access permit tcp host postal eq smtp no matter what eq smtp
inside_access_in list extended access permit tcp host 172.18.3.8 any eq smtp
inside_access_in list extended access permit tcp host 172.18.3.30 any eq smtp
inside_access_in tcp extended access list deny any any eq smtp
inside_access_in of access allowed any ip an extended list
Access extensive list ip 172.18.3.0 ComCast_Out_20_cryptomap allow 255.255.255.0 172.22.3.0 255.255.255.0
ComCast_Out_20_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 172.22.3.0 255.255.255.0
Access extensive list ip 172.18.3.0 ComCast_Out_25_cryptomap allow 255.255.255.0 172.20.3.0 255.255.255.0
vpn_access list standard access allowed 192.168.10.0 255.255.255.252
standard access list vpn_access allow 172.17.1.0 255.255.255.0
standard access list vpn_access allow 172.18.0.0 255.255.0.0
standard access list vpn_access allow 172.31.3.0 255.255.255.0
vpn_access list standard access allowed 172.30.1.0 255.255.255.0
vpn_access list standard access allowed 192.168.0.0 255.255.0.0
pager lines 24
Enable logging
emergency logging monitor
logging warnings put in buffered memory
asdm of logging of information
MTU 1500 ComCast_Out
Within 1500 MTU
MTU 1500 NOT_IN_USE
management of MTU 1500
IP local pool vpnpool 192.168.20.2 - 192.168.20.254
172.31.255.1 mask - local 172.31.255.250 pool POOL VPN IP 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 522.bin
don't allow no asdm history
ARP timeout 14400
NAT-control
Global interface (ComCast_Out) 1
Global (NOT_IN_USE) 1 interface
NAT (inside) 0 access-list sheep
NAT (inside) 1 192.0.0.0 255.0.0.0
NAT (inside) 1 0.0.0.0 0.0.0.0
TCP static (inside ComCast_Out) interface 3000 172.18.3.22 3000 netmask 255.255.255.255
TCP static (inside ComCast_Out) interface smtp 172.18.3.8 smtp netmask 255.255.255.255
TCP static (inside ComCast_Out) interface www 172.18.3.30 www netmask 255.255.255.255
TCP static (inside ComCast_Out) interface 3389 172.18.3.22 3389 netmask 255.255.255.255
TCP static (inside ComCast_Out) interface 172.18.3.22 pptp pptp netmask 255.255.255.255
TCP static (inside NOT_IN_USE) interface 3000 172.18.3.22 3000 netmask 255.255.255.255
TCP static (inside NOT_IN_USE) interface smtp 172.18.3.8 smtp netmask 255.255.255.255
TCP static (inside NOT_IN_USE) interface www 172.18.3.30 www netmask 255.255.255.255
TCP static (inside NOT_IN_USE) interface 3389 172.18.3.23 3389 netmask 255.255.255.255
TCP static (inside NOT_IN_USE) interface 172.18.3.22 pptp pptp netmask 255.255.255.255
TCP static (inside ComCast_Out) interface 3101 172.18.3.8 3101 netmask 255.255.255.255
TCP static (inside ComCast_Out) ftp ftp netmask 255.255.255.255 helpdesk interface
static TCP (inside ComCast_Out) interface ftp - data helpdesk ftp - data netmask 255.255.255.255
static (inside, ComCast_Out) 29.92.14.74 172.18.3.16 netmask 255.255.255.255
Access-group entering interface ComCast_Out
Access-group interface ComCast_Out outside_access_out
inside_access_in access to the interface inside group
Access-group entering interface NOT_IN_USE
Access-group interface NOT_IN_USE backup_access_out
Route 0.0.0.0 ComCast_Out 0.0.0.0 29.92.14.78 1 track 1
Route inside 192.168.0.0 255.255.0.0 192.168.10.1 1
Route inside 172.17.1.0 255.255.255.0 192.168.10.1 1
Route inside 172.18.0.0 255.255.0.0 192.168.10.1 1
Route inside 172.31.3.0 255.255.255.0 192.168.10.1 1
Route inside 172.30.1.0 255.255.255.0 192.168.10.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout, uauth 0:05:00 absolute
internal group vpnclient strategy
vpnclient group policy attributes
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list vpn_access
internal remote group strategy
Group remote attributes policy
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value 121
Enable http server
http 172.0.0.0 255.0.0.0 inside
http 192.0.0.0 255.0.0.0 inside
http 10.10.10.0 255.255.255.0 management
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
monitor SLA 123
interface type echo protocol ipIcmpEcho 168.87.71.226 ComCast_Out
NUM-package of 3
frequency 10
Annex ALS life monitor 123 to always start-time now
Crypto ipsec transform-set esp-3des esp-md5-hmac 3des
Crypto ipsec transform-set esp - esp-sha-hmac SHA3DES
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
3DES encryption dynamic-map dynmap 10 transform-set
Crypto-map dynamic outside_dyn_map 10 the value transform-set ESP-3DES-SHA
address for correspondence card crypto vpnremote 20 ComCast_Out_20_cryptomap
peer set card crypto vpnremote 20 202.13.116.209
vpnremote card crypto 20 the transform-set ESP-DES-MD5 value
address for correspondence card crypto vpnremote 25 ComCast_Out_25_cryptomap
peer set card crypto vpnremote 25 207.147.31.97
card crypto vpnremote 25 game of transformation-ESP-DES-MD5
vpnremote 30 card crypto ipsec-isakmp dynamic dynmap
map vpnremote 65535-isakmp ipsec crypto dynamic outside_dyn_map
vpnremote ComCast_Out crypto map interface
card crypto VN1530600A 663 matches the address ACL663
card crypto VN1530600A 663 set pfs
card crypto VN1530600A 663 set peer 29.92.14.73
crypto VN1530600A 663 the transform-set SHA3DES value card
card crypto VN1530600A 663 defined security-association life seconds 1800
crypto isakmp identity address
ISAKMP crypto enable ComCast_Out
crypto ISAKMP policy 10
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 20
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
the Encryption
md5 hash
Group 2
life 86400
Crypto isakmp nat-traversal 20
!
track 1 rtr 123 accessibility
tunnel-group type remote ipsec-ra
tunnel-group remote General attributes
address vpnpool pool
Group Policy - by default-remote control
tunnel-group remote ipsec-attributes
pre-shared-key *.
tunnel-group 29.92.14.73 type ipsec-l2l
IPSec-attributes tunnel-group 29.92.14.73
pre-shared-key *.
tunnel-group 202.13.116.209 type ipsec-l2l
IPSec-attributes tunnel-group 202.13.116.209
pre-shared-key *.
tunnel-group 207.147.31.97 type ipsec-l2l
IPSec-attributes tunnel-group 207.147.31.97
pre-shared-key *.
Telnet 192.168.0.0 255.255.0.0 inside
Telnet 172.0.0.0 255.0.0.0 inside
Telnet timeout 120
SSH timeout 5
Console timeout 0
management-access inside
management of 10.10.10.11 - dhcpd addresses 10.10.10.20
!
!
class-map inspection_default
match default-inspection-traffic
!
!
Policy-map global_policy
class inspection_default
inspect the pptp
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:82155434d3cfa69cd7217f20aaacabb7
: end
1720-A
version 12.2
horodateurs service debug datetime
Services log timestamps datetime
encryption password service
!
1720-A host name
!
logging buffered debugging 4096
!
iomem 20 memory size
clock timezone IS - 5
clock to summer time EDT recurring 2 Sun Mar 2:00 1 Sun Nov 02:00
IP subnet zero
!
!
no ip domain-lookup
name of the IP-server 172.18.3.24
DHCP excluded-address IP 172.20.3.1 172.20.3.20
!
IP dhcp pool dhcppool
network 172.20.3.0 255.255.255.0
router by default - 172.20.3.1
DNS-server 172.18.3.24 172.18.3.26
!
audit of IP notify Journal
Max-events of po verification IP 100
property intellectual ssh timeout of 120
property intellectual ssh authentication-3 retries
!
crypto ISAKMP policy 10
md5 hash
preshared authentication
Group 2
address of Cisco key crypto isakmp 29.92.14.73
!
!
Crypto ipsec transform-set esp - esp-md5-hmac TOWN_HALL
Crypto ipsec transform-set esp - esp-md5-hmac DES-MD5
Dimensions of tunnel mib crypto ipsec flowmib history 200
MIB crypto ipsec flowmib size of 200 historical failure
!
map VPNmap 10 ipsec-isakmp crypto
defined by peer 29.92.14.73
game of transformation-TOWN_HALL
match address TOWN_HALL
!
!
!
!
interface Ethernet0
IP 207.147.31.97 255.255.255.252
IP-group access to the PERIMETER of
NAT outside IP
Half duplex
card crypto VPNmap
!
interface FastEthernet0
LAN description
IP 172.20.3.1 255.255.255.0
IP nat inside
automatic speed
!
interface Serial0
no ip address
Shutdown
!
IP nat inside source list NAT_ADDRESSES interface Ethernet0 overload
IP classless
IP route 0.0.0.0 0.0.0.0 207.147.31.98
no ip address of the http server
enable IP pim Bennett
!
!
NAT_ADDRESSES extended IP access list
deny ip 172.20.3.0 0.0.0.255 172.18.3.0 0.0.0.255
IP 172.20.3.0 allow 0.0.0.255 any
PERIMETER extended IP access list
permit udp host 29.92.14.73 host 207.147.31.97 eq isakmp
esp permits 29.92.14.73 host 207.147.31.97
IP 172.18.3.0 allow 0.0.0.255 172.20.3.0 0.0.0.255
allow all all unreachable icmp
permit any any icmp echo response
allow any host 207.147.31.97 eq telnet tcp
allow any host 192.168.20.1 eq telnet tcp
permit tcp any eq www everything
permit tcp any eq 443 all
permit udp host 173.13.116.209 host 207.147.31.97 eq isakmp
esp permits 173.13.116.209 host 207.147.31.97
IP 172.22.3.0 allow 0.0.0.255 172.20.3.0 0.0.0.255
refuse an entire ip
TOWN_HALL extended IP access list
IP 172.20.3.0 allow 0.0.0.255 172.18.3.0 0.0.0.255
!
alias exec sr show run
alias exec s sh ip int br
alias exec srt show ip route
!
Line con 0
exec-timeout 0 0
Synchronous recording
line to 0
line vty 0 4
exec-timeout 60 0
Synchronous recording
local connection
transport telnet entry
!
No Scheduler allocate
NTP-period clock 17180009
end
1720-Bversion 12.1no single-slot-reload-enable servicehorodateurs service debug datetimeServices log timestamps datetimeencryption password service!1720-B host name!logging buffered debugging 4096no set record in buffered memoryConsole rate-limit logging 10 except errors!iomem 25 memory sizeclock AND time zone - 5clock to summer time EDT recurring 2 Sun Mar 2:00 1 Sun Nov 02:00IP subnet zerono ip fingerno ip domain-lookupname of the IP-server 172.18.3.24DHCP excluded-address IP 172.22.3.1 172.22.3.20!IP dhcp pool dhcppoolnetwork 172.22.3.0 255.255.255.0router by default - 172.22.3.1DNS-server 172.18.3.24 172.18.3.26!audit of IP notify JournalMax-events of po verification IP 100!!crypto ISAKMP policy 10md5 hashpreshared authenticationGroup 2address of Cisco key crypto isakmp 29.92.14.73!!Crypto ipsec transform-set esp - esp-md5-hmac TOWN_HALL!map VPNmap 10 ipsec-isakmp cryptodefined by peer 29.92.14.73game of transformation-TOWN_HALLmatch address TOWN_HALL!!!!interface Ethernet0IP 202.13.116.209 255.255.255.252IP-group access to the PERIMETER ofNAT outside IPHalf duplexcard crypto VPNmap!interface FastEthernet0LAN descriptionIP 172.22.3.1 255.255.255.0IP nat insideautomatic speed!IP nat inside source list NAT_ADDRESSES interface Ethernet0 overloadsource-interface IP kerberos anyIP classlessIP route 0.0.0.0 0.0.0.0 202.13.116.210no ip address of the http server!!NAT_ADDRESSES extended IP access listdeny ip 172.22.3.0 0.0.0.255 172.18.3.0 0.0.0.255deny ip 172.22.3.0 0.0.0.255 192.168.1.0 0.0.0.255IP 172.22.3.0 allow 0.0.0.255 anyPERIMETER extended IP access listpermit udp host 29.92.14.73 host 202.13.116.209 eq isakmpesp permits 29.92.14.73 host 202.13.116.209IP 172.18.3.0 allow 0.0.0.255 172.22.3.0 0.0.0.255allow all all unreachable icmppermit any any icmp echo responsepermit tcp any eq www everythingpermit tcp any eq 443 allip permit 192.168.1.0 0.0.0.255 172.22.3.0 0.0.0.255refuse an entire ipTOWN_HALL extended IP access listIP 172.22.3.0 allow 0.0.0.255 172.18.3.0 0.0.0.255IP 172.22.3.0 allow 0.0.0.255 192.168.1.0 0.0.0.255alias exec sr show runalias exec s sh ip int bralias exec srt show ip routealias exec sri see the race | I havealias exec srb see the race | b!Line con 0Synchronous recordingtransport of entry noline to 0line vty 0 4exec-timeout 0 0Synchronous recordinglocal connectionNo Scheduler allocateNTP-period clock 17180266endMake sure you have the following sets of transformations in used through the tunnel:
Crypto ipsec transform-set esp - esp-md5-hmac TOWN_HALLThe tunnel seems to be failing on the negotiations of the phase 2 due to incompatibility, but depending on the configuration
It seems very well.Are you sure that these debugs are not only a part of the negotiations and finally the established tunnel?
Check the condition of the tunnel with the commands:
HS cry isa his
HS cry ips its
In trying to establish the tunnel again and we will see the results.Federico.
-
Need help with Set-VMHostAdvancedConfiguration
Hello
Following commands do not work for some reason any.
Please see the errors of output.
No idea why it does not work?
$value1 = "[$datastorename] $syslogFoldername / $hostname.log.
$value2 = ' [] / scratch/log ".Game-VMHostAdvancedConfiguration - VMHost $vmhost - name of the "ScratchConfig.ConfiguredScratchLocation" - value $value1
Game-VMHostAdvancedConfiguration - VMHost $vmhost - name of the "Syslog.global.log.DirUnique" - value $value2Game-VMHostAdvancedConfiguration: 25/02/2013-11:55:51 Set-VMHostAdvancedConfiguration
A specified parameter was not correct.D:\sm\ScratchFolders\folder.ps1:23 char: 33
+ Set VMHostAdvancedConfiguration < < < <-VMHost $vmhost - name ScratchConfig.ConfiguredScratchL «»
apartment"- value $value1
+ CategoryInfo: NotSpecified: (:)) [game-VMHostAdvancedConfiguration], InvalidArgument)
+ FullyQualifiedErrorId: Client20_SystemManagementServiceImpl_GetVmHostAdvancedConfiguration_
ViError, VMware.VimAutomation.ViCore.Cmdlets.Commands.Host.SetVMHostAdvancedConfigurationGame-VMHostAdvancedConfiguration: 25/02/2013-11:55:52 Set-VMHostAdvancedConfiguration
"Syslog.global.log.DirUnique" is not valid or exceeds the maximum number of characters allowed.
D:\sm\ScratchFolders\folder.ps1:25 tank: 36
+ Set VMHostAdvancedConfiguration < < < <-VMHost $vmhost - name of the "Syslog.global.log.DirUnique" - will
read $value2
+ CategoryInfo: NotSpecified: (:)) [game-VMHostAdvancedConfiguration], InvalidName)
+ FullyQualifiedErrorId: Client20_SystemManagementServiceImpl_GetVmHostAdvancedConfiguration_
ViError, VMware.VimAutomation.ViCore.Cmdlets.Commands.Host.SetVMHostAdvancedConfigurationAs far as I know the 1 config entry should be a path in the local file, something like system "/ vmfs/volumes /...» »
See KB1033696.
For value 2, the key must be "Syslog.global.logDirUnique".
Game-VMHostAdvancedConfiguration - VMHost $vmhost - name of the "Syslog.global.logDirUnique" - value $value2
-
need help to set the access rights of a vmware server 2.0.1 on vmware image
Hello!
I have a vmware (running ubuntu server 9.04) image that was created with a vmware server installation varsion 1.0.9. now I decided to upgrade to the host, which means that the host totally changed: new equipment, new OS, new vmware-server-version: 2.0.1
My problem atm is, I may not know, what would be the appropriate access rights (chown/chmod) for this vmware image. during the installation of vmware server 2.0.1 I was asked to specify some 'administrative user' where I took the an im working with Linux itself (lets call it "user").
so, when I copied the old vmware image in the data store (/ var/lib/vmware/VirtualMachines for me), chown-ed the folder including all files init by A, setting chmod to something like 600, the console vmware (web surface) told me that there were several problems with the image and couln can't be started etc. etc. etc...
I played with several rights to the image and the only thing that seemed to help was setting the folder and all files included in 'root' with the command chmod chown '777'... not what I would call 'secured '.
so: how to set the access rights for the virtual machines? I want that they have only minimal rights as possible and especially nothing like root: 777...
My static VM files, as in those who are not dynamically created when the virtual machine starts, are the property of root, root of group with permissions of 711. Root is the user that I have chosen as the admin user when you run vmware - config.pl. My users do not have direct access to this server, so I'm not too worried about the permissions. You can give different rights for different users to different virtual machines, creating roles and their allocation to users/groups. On that, the details are in Chapter 10 of the user guide - http://www.vmware.com/pdf/vmserver2.pdf.
Guy Leech
VMware vExpert 2009
---
If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.
-
Need 'Play All' setting please
I do work a lot of still - especially the Menus.
Have a little problem with my notes of chapter and Menu Settings
Chapter 1
Chapter 2
Chapter 3
I have a Menu created for the above 3 chapters and I want a play as well. That is, the menu would be 4 elements
Play all THE
Chapter 1
Chapter 2
Chapter 3
I can work simply know how to do the link ALL play? (definition?)
If I connect to Chapter1... it stops at the end of Chapter 1.
I assume you have a simple timeline with three markers of chapter to this topic.
You must create a chapter by chapter Playlist, if you want to read them separately. Have a button for each chapter and set each action end return to the last Menu.
Remove the shares from the end of the chapters in your main timeline. Set game all in Chapter 1.
You will get an error message about end duplicate actions if you have timeline and Chapter 3 Playlist with the same end Action. Seems not important in practice, but avoid the complication with the end of the last chapter before the final credits - this means having another marker of chapter here, which is not used otherwise.
You can achieve the same result without chapter playlists by using too many wrinkles, but I've always found these issues.
-
How can I change the setting on my Apple to change the settings for automatic renewal at normal setting
I get a fresh fresh message on my credit card and I need to stop this setting automatic renewal for apple applications.
If you mean cancel the renewal auto-renewal subscription and then follow these instructions: view, change or cancel your subscription - Apple Support
(I asked for your message to be moved to the forum of the iTunes Store, where you have posted is for questions about the iTunes U app.)
-
Can I set up a secondary monitor to the HD on my iMac mid 2011
Can I set up a secondary monitor to the HD on my iMac mid-2011 with no problems. I cannot afford to upgrade to the new iMac 27-inch and wanted to update my monitor.
Is this possible on the Mid 2011 iMac?
Yes.
Your best option is to choose a good monitor that has Display Port or DVI input and shy away from those who only have HDMI and VGA input.
For a display Port monitor you will need a Mini Display Port to Display Port cable if it is not provided with the monitor.
For a DVI monitor you will need to a Mini DisplayPort to DVI adapter and a DVI cable.
Maybe you are looking for
-
How to change thermal paste? Videos or photos step by step? Thank you.
-
using windows 7. HP smartscreen
I opted to have automatic login on the account "my table". I have three different accounts. Now when I try to open a session accounts of 2nd and 3rd it will automatically take the 1st account. How can I remove auto connect to these accounts?
-
Error code 1402 updates of Windows
Downloads of my automatic update every time I get this message also. FILE NAME - WINDRVR. SYS E_FAULT_IN_NONPAGED_AREA It messes up my anti-virus software and others. I do a restore point for a cause of the week, it lasts for a week. I did it 4 times
-
A security update cumulative for Internet Explorer 8 for Windows XP (KB2183461)
A security update cumulative for Internet Explorer 8 for Windows XP (KB2183461) installation fails every time. Guard appears as a critical update will not yet installed the patch. I have XP with service pack 3. I downloaded from a separate source loc
-
My computer does not recognize my ipone to import images. Can you help me?