Need a suggestion related to the BC

Similar Questions

• Need some suggestions in writing the package...

  Hello world
  
  I just asking this question to know better than I do.
  I have a patient with 2 million lines in it. Is it possible to extract the 2 million lines in a textfile using UTL_FILE?. I need to extract each related data patients from different (bigger than the patient table) tables in a file deleted by commas. For each patient id, I must query other tables and get the data associated with this patient (depending on condition). For this I need to call different functions on different tables.
  
  Some people think like that...
  
  Create or replace procedure XXXX
  
  cursor-> to get the ID of the patient
  variables-> declare all variables
  
  Start
  
  File Manager for the file of the utl to write to a file
  Open the cursor
  using bulk collect limited no of lines extraction
  
  For each patient id
  Data1: = function1
  data2: = function2
  Data3: = function3
  --
  --
  --
  --
  --
  
  string: = data1 | Data2. Data3. ....
  UTL_FILE.put_line
  redefine the chain
  end loop;
  
  end;
  
  My questions are:
  
  Is it possible to call different functions for each id of patients (2 million patients) are there? is there a better way to do it.
  Please give me some suggestions if I need to change all the steps that I follow for best performance.
  
  Thank you
  Phani

  Marella Phani wrote:
  What happens if the function is a logic complex which can be done in SQL?

  Then, I would say that you might be surprised at what can be achieved in SQL, and if you encounter any problems just post it here, I'm sure there will be someone who could fall for you ;)

  Seriously, if you need to call a function of 2 million times, you code seriously slow, not to mention the processing power that would be involved. It's the difference between the treatment by SETs (SQL) and treatment by unique records.

• I paid for the pack of adobe PDF and I in some weird screen which shows the different products to buy. I just want to use the pdf pack to do what I need. any suggestions?

  I paid for the pack of adobe PDF and I in some weird screen which shows the different products to buy. I just want to use the pdf pack to do what I need. any suggestions?

  Hi jerrir58650452,

  You can access your service pack pdf by using the following link: https://cloud.acrobat.com

  Kind regards
  Rahul

• Need a Suggestion tune the SQL query

  Hello
  
  
  There is a view that is created that takes 17 seconds to run the query, when I split the query and run each query prend.15 seconds to run. Below the query I need to improve the performance of the code if you need your suggestion please order to tweek so this time take for execution to become less
  
  SELECT "Parature'"Source. "
  NULL 'retailer ',.
  reseller_name "reseller."
  NULL city "reseller."
  NULL state "reseller."
  A.Country "dealer Country."
  DECODE (a.state, "ACPA", "ACPA", 'EMEA', 'EMEA', NULL, 'Unknown', 'US') "Dealer Theater",
  NULL "Customer Name,"
  NO city 'customer ',.
  'Client state', NULL
  NULL 'country of the customer. "
  NULL "customer Theater."
  NULL "sales book Date."
  NULL "Ship Date."
  c.sales_order_number 'Sales Order Number',
  C.Po_Number "Number"
  controller_model_number_1 "product name."
  TRIM (UPPER (serial_number_1)) 'product serial number.
  c.contract_id "Contract ID",
  product_name 'name of support. "
  To_date (c.contract_purchase_date) "Start Date"
  To_date (c.contract_expiration_date) 'Expiry Date',
  NULL "header Status."
  NULL "status of line."
  NULL 'line Type. "
  NULL "reason for termination of employment."
  NULL 'location_id. "
  NULL 'Product_id '.
  Of edb_assets c,.
  edb_accounts one
  WHERE controller_model_number_1! = 'NULL '.
  AND Serial_Number_1! = 'NULL '.
  AND C.Amid = A.Amid (+)
  
  UNION
  SELECT "Parature'"Source. "
  NULL 'retailer ',.
  reseller_name "reseller."
  NULL city "reseller."
  NULL state "reseller."
  A.Country "dealer Country."
  DECODE (a.state, "ACPA", "ACPA", 'EMEA', 'EMEA', NULL, 'Unknown', 'US') "Dealer Theater",
  NULL "Customer Name,"
  NO city 'customer ',.
  'Client state', NULL
  NULL 'country of the customer. "
  NULL "customer Theater."
  NULL "sales book Date."
  NULL "Ship Date."
  c.sales_order_number 'Sales Order Number',
  C.Po_Number "Number"
  controller_model_number_2 "product name."
  TRIM (UPPER (serial_number_2)) 'product serial number.
  c.contract_id "Contract ID",
  product_name 'name of support. "
  To_date (c.contract_purchase_date) "Start Date"
  To_date (c.contract_expiration_date) 'Expiry Date',
  NULL "header Status."
  NULL "status of line."
  NULL 'line Type. "
  NULL "reason for termination of employment."
  NULL 'location_id. "
  NULL 'Product_id '.
  Of edb_assets c,.
  edb_accounts one
  WHERE controller_model_number_2! = 'NULL '.
  AND serial_number_2! = 'NULL '.
  AND C.Amid = A.Amid (+)
  UNION
  
  SELECT "Parature'"Source. "
  NULL 'retailer ',.
  reseller_name "reseller."
  NULL city "reseller."
  NULL state "reseller."
  A.Country "dealer Country."
  DECODE (a.state, "ACPA", "ACPA", 'EMEA', 'EMEA', NULL, 'Unknown', 'US') "Dealer Theater",
  NULL "Customer Name,"
  NO city 'customer ',.
  'Client state', NULL
  NULL 'country of the customer. "
  NULL "customer Theater."
  NULL "sales book Date."
  NULL "Ship Date."
  c.sales_order_number 'Sales Order Number',
  C.Po_Number "Number"
  controller_model_number_3 "product name."
  TRIM (UPPER (serial_number_3)) 'product serial number.
  c.contract_id "Contract ID",
  product_name 'name of support. "
  To_date (c.contract_purchase_date) "Start Date"
  To_date (c.contract_expiration_date) 'Expiry Date',
  NULL "header Status."
  NULL "status of line."
  NULL 'line Type. "
  NULL "reason for termination of employment."
  NULL 'location_id. "
  NULL 'Product_id '.
  Of edb_assets c,.
  edb_accounts one
  WHERE controller_model_number_3! = 'NULL '.
  AND serial_number_3! = 'NULL '.
  AND C.Amid = A.Amid (+)
  
  UNION
  SELECT "Parature'"Source. "
  NULL 'retailer ',.
  reseller_name "reseller."
  NULL city "reseller."
  NULL state "reseller."
  A.Country "dealer Country."
  DECODE (a.state, "ACPA", "ACPA", 'EMEA', 'EMEA', NULL, 'Unknown', 'US') "Dealer Theater",
  NULL "Customer Name,"
  NO city 'customer ',.
  'Client state', NULL
  NULL 'country of the customer. "
  NULL "customer Theater."
  NULL "sales book Date."
  NULL "Ship Date."
  c.sales_order_number 'Sales Order Number',
  C.Po_Number "Number"
  controller_model_number_4 "product name."
  TRIM (UPPER (serial_number_4)) 'product serial number.
  c.contract_id "Contract ID",
  product_name 'name of support. "
  To_date (c.contract_purchase_date) "Start Date"
  To_date (c.contract_expiration_date) 'Expiry Date',
  NULL "header Status."
  NULL "status of line."
  NULL 'line Type. "
  NULL "reason for termination of employment."
  NULL 'location_id. "
  NULL 'Product_id '.
  Of edb_assets c,.
  edb_accounts one
  WHERE controller_model_number_4! = 'NULL '.
  AND serial_number_4! = 'NULL '.
  AND C.Amid = A.Amid (+)
  
  UNION
  SELECT "Parature'"Source. "
  NULL 'retailer ',.
  reseller_name "reseller."
  NULL city "reseller."
  NULL state "reseller."
  A.Country "dealer Country."
  DECODE (a.state, "ACPA", "ACPA", 'EMEA', 'EMEA', NULL, 'Unknown', 'US') "Dealer Theater",
  NULL "Customer Name,"
  NO city 'customer ',.
  'Client state', NULL
  NULL 'country of the customer. "
  NULL "customer Theater."
  NULL "sales book Date."
  NULL "Ship Date."
  c.sales_order_number 'Sales Order Number',
  C.Po_Number "Number"
  controller_model_number_5 "product name."
  TRIM (UPPER (serial_number_5)) 'product serial number.
  c.contract_id "Contract ID",
  product_name 'name of support. "
  To_date (c.contract_purchase_date) "Start Date"
  To_date (c.contract_expiration_date) 'Expiry Date',
  NULL "header Status."
  NULL "status of line."
  NULL 'line Type. "
  NULL "reason for termination of employment."
  NULL 'location_id. "
  NULL 'Product_id '.
  Of edb_assets c,.
  edb_accounts one
  WHERE controller_model_number_5! = 'NULL '.
  AND serial_number_5! = 'NULL '.
  AND C.Amid = A.Amid (+)
  UNION
  SELECT "Source", "ERP"
  Imv.Bill_To 'retailer ',.
  Imv.Ship_To "dealer."
  Ship_To_City "Dealer City."
  Ship_To_State "State dealer."
  Edb2_Global.Country_Name_Theater (Imv.Ship_To_Country, 'COUNTRY') 'dealer country. "
  Edb2_Global.Country_Name_Theater (Imv.Ship_To_Country, 'THÉÂTRE') 'dealer Theater. "
  Cl.Company_Name "name of the customer."
  Cl.City "customer's city."
  Cl.State "State of the customer."
  Edb2_Global.Country_Name_Theater (cl.) Country, 'COUNTRY') 'country of the customer. "
  Edb2_Global.Country_Name_Theater (cl.) Country, 'THEATER') "customer Theater."
  Imv.So_Booked_Date "Date from the sale of book."
  Imv.Ship_Date "Delivery Date"
  Imv.Order_Number "client order number."
  Imv.Cust_Po_Number "Number"
  Cp.Item_Name "product name."
  Cp.Product_Serial_Number "serial number of product."
  To_char (Imv.contract_number) "Contract ID"
  Imv.Service_Description "name of support."
  Imv.Service_Start_Date "Start Date"
  Imv.Service_End_Date "expiration Date."
  Imv.Header_Status "header Status."
  Imv.Line_Status "status of line."
  Imv.Line_Type 'line Type. "
  Imv.Termination_Reason "reason for termination of employment."
  Cl.Location_Id 'location_id. "
  CP.ID "Product_id".
  Of ib_support_contracts_mv imv.
  customer_products cp,
  customer_locations cl
  WHERE superior (Trim (Imv.Serial_Number)) = Upper (Trim (Cp.Product_Serial_Number (+)))
  AND Cp.Location_Id = Cl.Location_Id (+)
  /
  
  
  There is a Union for each request, please suggest how tweek
  
  Thank you
  Sudhir

  A quick look indicates that first 5 select queries are that even accepting the 2 conditions

  WHERE controller_model_number_1! = 'NULL '.
  AND Serial_Number_1! = 'NULL '.

  Use SEPARATE and Clause OR reduce these 5 queries in one like that

  SELECT DISTINCT
             .....
             ......  
  
    FROM edb_assets       c
        ,edb_accounts     a
  WHERE  C.Amid = A.Amid(+)
    AND  (
            (     controller_model_number_1 != 'NULL'
              AND Serial_Number_1 != 'NULL'
            )
           OR
            (     controller_model_number_2 != 'NULL'
              AND Serial_Number_2 != 'NULL'
            )
           OR
            (     controller_model_number_3 != 'NULL'
              AND Serial_Number_3 != 'NULL'
            )
           OR
            (     controller_model_number_4 != 'NULL'
              AND Serial_Number_4 != 'NULL'
            )
           OR
            (     controller_model_number_5 != 'NULL'
              AND Serial_Number_5 != 'NULL'
            )
  
         )
  

  Concerning
  Arun

  Published by: Arun Kumar Gupta on May 9, 2012 12:10

• relative to the backup of network win 7 - need win 7 professional on both computers

  Re of network backup, win 7, I understand that I need professional win7 to store the backup file on a second computer, my question is the 2nd computer need win 7 Professional as well?

  Hello

  Thank you fo contact Microsoft Answers.

  Disk network backup requires just a network storage, no need for the destination computer to have Windows 7 Professional.

• What is Regedit and how it relates to the HP printing software?

  Regedit is a Windows program that allows you to edit the registry keys that control the PC. It contains a complete list of all the equipment of the system and information; and a single incorrect change here can completely break your computer forever.  It is strongly recommended that you contact a professional if you have been invited to go in this order.  Most often associated with Center HP solutions and other software that is not installed, you will see here in this post (step 26) when she suggests doing a complete scrub to remove all the files on a computer not HP HP. This is a real document that suggest going into the registry to solve an access denied Error Message.

  HP and its users of the forum are volunteers and highly skilled individuals who can give you the suggestion, but, so far, it was left to the HP printer customer curious to find the means to do so.  If this saves you the headaches and the possible destruction of your computer for me to publish this information so I'll do it, but keep in mind this isn't the place for beginners, and there are an infinite number of potential mistakes that can be made.  This is a very confusing place and all information about the deletion of the keys in order to find the set of features is left to the interpretation of the reader, leaving more room for error.

  1. How do not a mistake
  one) BACK UP THE REGISTRY before you begin.  Before editing the registry, it is recommended to create a restore point using System Restore.  You can also export the registry file in a new folder saved on your desktop where it is easily accessible. To export, open the registry editor by clicking the Start button, type regedit in the search bar, and you will see at the top of the list.  Click on regedit.exe and after it opens, select the file and then export it.  Save wherever you want, but the Office will be the best place to return to if you make a mistake.  I recommend calling something that is easy to remember and very obviously is named in the case where you need to pick it up later.

  (b) TAKE YOUR TIME.  Do not rush or try to clean the registry of everything related to HP if you have an HP computer, if you're not fully awake and aware, and if you are not sure of the source guide you.

  (c) If you have an HP computer, do NOT touch the registry.  There is no safe way to tell except KEEP OUT.  You are looking for something here, while with good intentions on research only the printer, you have problems.  A system restore and registry backup is not guaranteed to save 100% of the time.  Contact HP or find an alternative for what anyone, you need your HP printer to do.

  2. how to correct an error
  (a) you can click on the saved file that ends with an extension of registration file (.reg).  A window pops up that says "adding information can unintentionally change or delete values and make the components to stop working correctly.  If you do not trust the source of this information, do not add it to the registry.  "Are you sure you want to continue?" If you click YES you will see "the keys and the values contained in this place have been added successfully to the registry" if all goes well. Click OK and your changes will be restored.

  (b) this document from Microsoft gives instructions on how to do a system restore in XP and here is a link about the restoration of the system in Windows 7, as well as the frequently asked questions.  It is good to have several backup plans before committing to something that you don't know much.

  3. Why do I need to do this?
  (a) it is not only a problem with the HP software, but software in general tends to leave behind a mess in the registry, even after having made a simple uninstall.  This would be used CCleaner along the coast or other record cleaning software remove left on the keys that do nothing except that the installation programs.  The setup package search a specific folder and not the content it contains.  If it finds this empty folder during the installation, you will never get your beloved software on your computer, this center of HP, HP Printer Wizard or other facilities failed solutions.  Here's a reference any order posted by IBM regarding a failed BIOS installation.

  4. how to do this safely?
  The only way to do it safely is to hire a professional who has a lot of experience in this field and knows exactly what it is that he or she is looking and the case.  However, this option is not always available.  Do not perform these steps when in a hurry, a bad mood, tired, or after 5 hours of troubleshooting previous as this is when the user gets tired and errors often do.

  5. how to modify registry keys to HP?
  Like I said before, it is likely that the software has been working at any given time.  Sometimes uninstalling software on an unstable platform as an old PC can leave these files in the registry.  It's why I do a uninstall/reinstall of the software the last resort when you are troubleshooting because there is often a fix for the problem without having to uninstall something every time that the printer mess up. Here are the steps to search for these missing files and delete them:

  (a) once you have regedit open, drag the centerline on so that you can see all the names of files or open it in full screen.  Skip the first key called HKEY_CLASSES_ROOT.  You will not find what you are looking for here.

  (b) a click on the arrow to the left of HKEY_CURRENT _USER expands to show all files under it.  You must click on each arrow until you see a HP folder.  If you see one, right click and delete it.  You don't have to remove all individual keys under this main folder, but if it's a little one, you can see a bit of value to the wide to the right of this screen among other keys not HP.  Remove only that relating to your printer by right-clicking and selecting delete.  If you arrive at a software folder, you can delete the HP folder and the Hewlett-Packard folder.  REMEMBER THAT THIS APPLIES ONLY TO COMPUTERS, NOT HP.

  (c) continue this step at the bottom of the list, remove only the things that have to do with your printer and are obvious.  If in doubt, don't go out.  Follow along with your own progress is to close each file you have completed it.  Take your time.  If you are not comfortable here, so it's a clear sign, you need to call someone for help.  If so, try another method of registry cleaning, such as CCleaner and Advanced System Care until you can get the help you need.

  6. what should I do now?
  It is not necessary to restart the computer at this time.  If you look at options of analysis or trying to get your rear HP software, you will need to re - install the full feature software and drivers for your printer.  This isn't a post about how to fix your printer or its software, it is a message to warn users not only of the dangers to be found in this tool, but to guide you if you want to perform this step without professional assistance.  The last thing you want to do is break your computer in the process, but sometimes it is a mandatory step to fix but the information about this brand of printer isn't here so that everyone can find.  All I want to do is give the average user the information they need before doing something destructive and cannot back away from him.  Take your time and keep looking for other forums before you perform these steps on your own, especially if it's the first time, you have already been in this part of your computer.

  These steps are not sponsored by HP and are really based on my personal experience and knowledge of others. If you have any questions I will do my best to respond, but the main point of this post is to remind you, if you have any questions you can come back to another option.

• With the help of Yosemite, I like Photos app in general; have big Aperture library, although I use rarely opening Tools. Advantages, disadvantages and pitfalls related to the migration of Photos?

  With the help of Yosemite, I like Photos app in general; have big Aperture library, although I use rarely opening Tools. Advantages, disadvantages and pitfalls related to the migration of Photos?

  Opening was a pro the Pro amateur-oriented or serious app, usually shooting Raw, probably on a digital SLR.

  If that's you then pictures will miss a lot for you.

  If this isn't the case, then opening was probably overkill for your needs.

  If you like the pictures then this is the way to go.

• HP PAVILION: p6633w please give a suggestion to improve the graphics for the best games. thnx

  HP PAVILION: p6633w please give a suggestion to improve the graphics for the best games. thnx

  Windows 7 64 bit all automatic updates of HP and Windows.

  Don, welcome to the forum.

  The first thing you need to do is to upgrade the power supply (PSU).  The current PSU is only 250W.  It is not enough to run a new intermediate level video cards.  They require a minimum of 400W.  It would be a good idea to buy at least one with 500W.  This will give you more choice of cards.  I love the Corsair and OCZ PSU.  I always suggest measuring the current PSU and comparing measures to whichever you choose.

  You should stay at 9 "or less for the duration of the video card.  This ensures that it fits in the space provided.  You would need a larger case to go further.  I like XFX, EVGA, Sapphire and PNY in that order.  The two cards in the links can be inserted into the computer and they will be good for the games.  Be sure to read the 'Détails' and 'Clients' to learn more about each of them.  I'm looking for products that have more than 100 customers and are at least 4 eggs.  Normally, this will be a very good product.

  Let us know if you have any other questions.

  If your problem is solved, please click "accept as a Solution.

• Explorer Windows has encountered a problem and needs to close, sorry for the inconvenience into account only one user. Other user accounts properly.

  This problem deals with only one of my user accounts, where the user accounts function correctly.  When my wife logs in to his user account, it receives the error "windows Explorer has encountered a problem and needs to close, sorry for the inconvenience."  No ICONS or deskbar charge upward; However, my daughter and my user account functions properly.

  I did a system successfully restore to a previous point, but the problem remains.

  If you are still having problems with Windows Explorer crashing, I suggest to consider the suggestion offered by ShadowKat:

  "Hello people, it seems that some guys out there are still having trouble with this random crashes. I have the same problem, except that it happens every time that I go to my media files on my NAS. It seems that there is a bug or something with windows that causes this problem when you access a folder to storage media like mine, especially when the size of the file is very large (archive all my discs of film there for convenience and continuous =), about 1 TB of data). Windows capable of generating thumbnail images for your files and blocks the Explorer as well.

  I solved this by going to my computer > click the "Organize" (upper-left) > folder and search options > view tab check "Show icons, never thumbnails" option and uncheck the "display file on the photos." This prevents windows to generate images and solved the problem for me. Less visually flashy Yes, but at least not need a cloth and restart is).
  Source: http://www.computertooslow.com/windows-explorer-has-stopped-working.asp
  I hope this helps and good luck!
  ShadowKat. »
   
  If you're still having problems after this, I suggest that to start a new thread in the following location:
   
  http://answers.Microsoft.com/en-us/Windows/Forum/performance
   
  I hope this helps.

• need to link to get the driver for my compaq presario pc, reinstalled using the windows xp operating system

  someone sent me information to try to fix my cd/dvd doesn't work do not and after that following the steps, it is still not work.i said, maybe I need to reinstall the driver if someone can send me the link to microsoft so I can get the driver for reinstall-thank you

  Hello

  1 did you change on your computer?

  2 did you receive an error message?

  3. What is the number of the model of the computer?

  Method 1:

  I suggest you follow the link and check.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Method 2:

  I suggest you to install the drivers from the manufacture of the product and check.

  http://www.Compaq.com/country/cpq_support.html

• My original XP Pro disc is SP2. I've updated to SP3 and now I have corrupted files and need to repair windows with the disc.

  My original XP Pro disc is SP2. I've updated to SP3 and now I have corrupted files and need to repair windows with the disc. When I put disc SP2 in it tells me that it is a work old version and custom. How to make a disc with SP3 top to repair my OS?

  Hi DFPI.

  I suggest you to uninstall Service Pack 3 temporarily on your computer.

  How to remove Windows XP Service Pack 3 from your computer

  Later, try to repair the computer with the Windows XP disc and check if it works.

  Later, reinstall the Service Pack 3 after the computer repair.

  Reference: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  Hope the helps of information.

  Please post back and we do know.

• Any suggestions to clean the hard drive of personal data, so that I can give my laptop without security concerns?

  Any suggestions to clean the hard drive of personal data, so that I can give my laptop without security concerns?

  Richard's suggestion is about as extreme as you can get. Of course, it works very well and the data is not recoverable, but unless you have State secrets then it might be a little overkill. It is the only way to be sure that the data is destroyed, but 100%!

  There are programs such as (Darin of Boot and Nuke) DBAN or KillDisk which can erase the disc at the point where it would take massive resources (money, time and material) to retrieve all the data. Then, a new installation or Windows recovery would be needed. But you don't have to replace the hard drive. It is effective even against the pirates experienced more than 99.9%.

• Need replacement battery: Vaio netbook, the number of battery - vgp-bps15/8

  Need replacement battery: Vaio netbook, the number of battery - vgp-bps15/8

  Hello Shirley,

  Battery model VGP-BPS15/B is not available for sale on the Sony Online store. I suggest contact you any local store or authorized Sony part distributors here to check the availability of the same thing: http://esupport.sony.com/US/perl/support-info.pl?info_id=927#place_order_9

  Note: If my post answered your question, please mark it as an "accepted Solution".

• FSX says I need administrator right to save the texture

  Hello microsoft,.

  I posted a question similar to this one before, got a response, but did not get specific answers. See, when I download the texture file and to copy them all, cut and paste, after all you're supposed to save the file and start FSX. But when I save the file, he denies and says I need administrator rights to save the file when I am the administrator of the computer. Please give me an answer to this and help. Thank you.
  -Maryse

  Hello

  Flight Simulator has its own support forum. I suggest you to send your requests in the following link:

  http://www.Microsoft.com/products/games/FSInsider/tips/pages/default.aspx

• Need administrator rights to install the program, but I am the administrator. What am I doing here?

  I am trying to install a program, but I get the message that I need administrative rights to install sign out and then sign in as an administrator. But I am the administrator, so what do I do? Why do I get these messages when I am the administrator and I have administrative rights?

  I'm trying to install Pinnacle Studio 9. It ran fine under XP. Is it possible to install as XP application? I am at a loss and I need some suggestions.

  I am running Windows 7 Home Premium.

  Right click on the shortcut to install, then click "Run as Administrator".