Similar Questions

• Compacted Outlook Express and save some of my emails. Now, I need access to the following, but can not open them. How to reopen these emails? __

  Compacted Outlook Express and save some of my emails.  Now, I need access to the following, but can not open them.  How to reopen these emails?

  Hi Redtiger1705,

  Lost emails immediately after compact preforming?
  If so, Outlook Express creates BAK files before compaction. They are copied there as a precaution, in case something goes wrong with the compaction. The following steps should help those rear:
  
  1) open Outlook Express and go to tools, Options, maintenance, store folder. Copy the entire path to the storage folder, and then click OK.  Close Outlook Express.

  (2) go to the basket and search for all files with the .bak extension.  Restore the most recent .bak files. That he will put in the OE store folder, but still like a BAK file.

  (3) click on start, run and paste the path that you copied in step 1 in the run box, and then press ENTER.

  4) click Tools, Folder Options. In the Folder Options window, click the view tab.

  (5) less advanced, uncheck the "Hide extensions for known file types".

  (6) you should see the two sent a Sent Items.dbx from the file as well as the Items.bak. Rename the Sent Items.DBX to Sentold.dbx and Rename Items.Bak sent to Sent Items.DBX. When you open OE, your messages sent items must be restored.

  Please let me know if I can be of further assistance!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Do I need to use the software provided with the wireless hardware to go wireless? __

  I have a router Linksys Wireless (wrt160n) that I am not using. I whant to buy a (Linksys WUSB600N) for my office. I want to know if I need to use the software supplied with the hardware, or can I just use Microsoft Wizard to configure my network? Operating system is Vista Premium.

  Thank you Jeremy will do.

• I need to change the default 'open with' Bridge of photoshop to photoshop CC 2015.  How do I do that?

  I need to change the default 'open with' Bridge of photoshop to photoshop CC 2015.  How do I do that?

  Hi karen,.

  It can get a bit tangled. Bridge delay normally to some think the Finder is the default, and every OS has its own way for you to tell the OS what you say should be the default value. On Mac, it's in the file information dialog box. I think that Windows called something like properties. You can change an extension to open all files with an application in your operating system first, restart Bridge and see if she pays tribute to this choice by double clicking on a file and observing that it opens the right version of PS. normally, it will be. (By default) must also appear after this choice in the list open with contextual (right click on the file you want to open, select open with and find the name of the application in the list).

  If this does not work, you will need to manually choose your file association for the extension of the list next to him in the Bridge preferences > File Associations. Which is normally necessary only when you want to override the default choice of your OS System. For example, maybe you want to bridge to open in PS JPEG files when you double-click it in Bridge, but if you double-click on a file in the Finder/Explorer JPEG, you want to open with Viewer of this system. It will not say it is (by default) in the pop-up list more, but bridge will honor your file associated with the choice of your system.

• Hi all, how can restrict us and end from 'a droping table' user but need access to the 'workshop of data' to load the data into the spreadsheet.

  Hi all

  How can we limit and end user of "droping a table."

  For example: I created an array of login admin and gave access to "SQL workshop" for the end user. but after that I have created a table, the end user cannot access object browser shop and drop a table. one thing we can do does not have access to the SQL workshop. However, my requirement is the user needs to access the data workshop, which is located under the SQL workshop but they it should not access the tables.

  Kindly let me know how we can do this?

  Thank you

  Vinod Paparaju

  User13309437-Oracle wrote:

  Please update your forum profile with a recognizable username instead of "User13309437": Video tutorial how to change username available

  Always include the information referred to in these guidelines when you post a question: How to get the answers from the forum

  How can we limit and end user of "droping a table."

  For example: I created an array of login admin and gave access to "SQL workshop" for the end user. but after that I have created a table, the end user cannot access object browser shop and drop a table. one thing we can do does not have access to the SQL workshop. However, my requirement is the user needs to access the data workshop, which is located under the SQL workshop but they it should not access the tables.

  Kindly let me know how we can do this?

  There is no way not to restrict access to individual tools in the workshop of SQL. Rather than give the developer-level end-users to access the SQL workshop, create applications containing data support Wizards, where end-user access can be controlled using the standard APEX authentication and authorization schemas.

• Do I need an IP NIC of each Esxi host address?  VMs needs access to the storage network?

  Hi all

  The issue go, I have a host machine with 3 nic cards - > 1 for production network, 1 for the management network and 1 for the network backup.

  The guest PC VM inside will be connected to the 3 network,

  But for the host himself, will be used for management and backup only.

  T1) is the bears from production on the need for level ESXI host having an IP address as well?

  =================================================================

  Right of Q2) now my host use internal storage. If I'm to migrate to a SAN storage, I have 1 more network for storage.

  I understand that the configuration of virtual machines and their data are assigned and stored in the data store that is made visible at the level of the host.

  They must for the virtual machines access the data store, join the storage network as well? or they are access to the storage through the host

  ================================================================

  Kind regards

  Noob

  T1) is the bears from production on the need for level ESXI host having an IP address as well?

  A NIC itself does not require an IP address. Which IP addresses are required for VMkernel port groups (for example, networking, vMotion, storage access,...) as well as virtual machines.

  Right of Q2) now my host use internal storage. If I'm to migrate to a SAN storage...

  No, a virtual machine (i.e. the guest operating system) does not require access to the system of storage, only the ESXi host.

  André

• Need access to the original version of InCopy

  I have a new Mac. I want to install InCopy without using the old Mac Migration Asst. But I don't have access to the upgrade disk. How do I access the original version so I can then apply the upgrade?  I tried to download the original of my Adobe account, but it did not work.

  you don't need the original version to install an upgrade.

  After you enter the serial number of your upgrade (and does not find a previous version installed), the installer will give you a drop down you can choose your product calling (the original version of incopy).  you will then be asked for the serial number of the original version.

  Enter the correct number at the right time and to proceed with the installation.

• VERY URGENT: need access to the trial account - also pay

  Hello

  My for Adobe Acrobat Connect Pro trial account has expired.

  If I pay for the new session, I will be able to access my trial account? (I need to download the recording of flv).

  I asked Adobe marketing: person DIDN'T answered me.

  It is very urgent.

  Thank you

  --

  MC

  So I contacted an Italian dealer, because I have received no response from Adobe (really really bad how is Adobe support?).

  They said that the records could not recover.

  How bad!

  A reminder that my account was expiring and the chance to update my account would have sufficed...

  
  

  I look forward to other non Adobe with better support solutions!

  --

  MC
  

• I can't access all the settings BIOS with Satellite Pro M10

  Hello, I have a little problem with my satellite pro m10.
  When I press the button 'on', I see the toshiba logo. (normal)
  I want to get into the bios, I push the button "esc". Now, I see the message "check system. Then press [F1]. So, I push the F1 button.
  Now I can see "password ='"
  I push the button directly enter, and I have access to the bios. But my problem is that I can only change the date/time, password and the hard drive password.
  I can't access to other environments, such as boot priority, show, another.

  In the beginning, I think it's the fault of password, but I try to change it and I have no results.

  Please help me.
  Kind regards

  Hello

  What happens when you remove the BIOS password?
  Have you tested it? If this is not the case, check it.

• Cannot use applications that need access to the internet

  I have problems with a number of applications on my Vista system.  All worked well until a few days ago (I ran the Symantec Conficker and Msft Malware tools so am sure it isn't the Conficker virus).  I am connected to the internet and can go to websites via IE.  However, applications that require access to the Internet are faulty.  It started with Windows Live Messenger, which would not start (error message has been that there was a problem).  After much effort I uninstalled but impossible to reinstall as the installer does not due to "not connected to the internet.  Another application shows an error 80072efd - lack of connection.  I can't configure Norton due to the lack of ability to connect to services.  Any ideas?  Thanks in advance...

  Hi DebAlex,

  Is the name of the application Python ring a Bell to you? It is a programming language and PyWin32 is an extension for it.  Please do a search on your computer (include files and hidden folders) for the file name pythonw.exe and pywin32.
   
  Depend on whether you use on your computer or not Python, you might want to try find it in Control Panel--> programs and features and remove it from the list if you use the program.

  If you do not use the program, rename the folder these files are locate in (if you can find using the search).  Other people with the same error were able to fix this way.

  Let us know if this helps, Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Licensing issue? I need to replace the default motherboard with a 'Detail' education Vista Ultimate Upgrade on top of XP "OEM." Can legitimately transfer my license everywhere and how?

  I am currently a computer on which I already installed XP OEM and upgraded to the edition upgrade Vista Ultimate retailers through the ultimate steal Microsoft.

  [Reminder]

  The problem I have is that I've recently updated my graphics card to a card of Nvidia 7300GS card Nvidia GT240 on which my motherboard was properly assessed. However, due to some unfortunate circumstances (I dunno if it's associated graphics or an electrical surge problem, I suspect the latter as the card is fine) my PCI Express slot is fried! This resulted in the motherboard being unable to start any card in the PCI Express slot and gives a series of BIOS beep error codes. I even dug my old graphics (7300GS) and he was still unable to boot. Accordingly, I need to replace the motherboard for the PCI Express slot works if I use a graphics card.

  [Problem]

  Since the license Vista Retail Upgrade that I use currently is the edition of 'detail', can I simply change my motherboard everything and turn it back on, or is it more complex because it is installed on the high XP OEM that is bound to the default motherboard? What are my options?

  I have to buy another XP OEM license and reinstall everything from scratch? What happens if I didn't reinstall and just changed the motherboard and drivers updated my current installation? Is - is this legitimate?

  As I understand it, the Windows for OEM license allows a person replace a motherboard of 'default' (GA-M55plus-S3G in my case) for a replacement under certain conditions, mainly as for everything. Am I entitled to it? If so, what motherboard would be I can replace by although it is considered an upgrade? I have in mind an ASUS M4A78L-M as it is cheap and comes with connectors female jack audio 8 channels on the backplate was on my old motherboard.

  My main confusion is to know what license applies to me because of the upgrade process, retail of Vista or XP OEM? Upgrades medium I improve my driver's license?

  I would like to solve this problem without canceling my licenst but just don't know how?

  Thank you very much for any help or advice.

  Zemian.

  It is not Microsoft.

  These are public forums, hosted by Microsoft.

  You need to set the XP Reinstall 1 > and then perform the upgrade to Vista.

  We cannot tell you what motherboard you can replace it with.

  Here is the Vista Forums.

  You will have no problem using the Vista Upgrade retail > solve your XP problem 1 in the Forums of XP:

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• New user needs access to the old user profile files

  Windows 7 Pro on a W2008 domain, the latter leaves the company; User_B will take his place and needs access to all files (including e-mail - WindowsLiveMail);  There are currently three email accounts configured in the profile of the latter.  What is the best way to give User_B access to the data?  I tried to copy the data from the profile folder to the folder profile User_B, but when I try to open a document (Office 2002), I get "there was a problem sending the command to the program".

  When I tried to copy the profile via the control panel... Settings, user profiles, the option "copy to" was not available.

  There must be a relatively simple way to do this.  Help, please.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• I imported my memory card photos in lightroom. I need to export the original images with the original settings. How can I do this?

  I imported the photos on a memory card. I did my corrections and exported on my desk. Lightroom has changed

  the size of the pixels on the export. I need to know how to take the original Lightroom with the same data pictures

  on the photos as shot.

  Is there anyone who knows how to do this. There must be a way...

  It seems that you export a small image and not the original.

  Select the image in the library and check the pixel under EXIF dimensions in the metadata pane on the right side of the screen.

  

• I need someone to the split screen with me to help design a navigation scrolling Parallax!

  I need to design a navigation and footer page similar to www.astonmerrygold.com tonight and need help!

  You can use the full rectangle with menu as well as rollover effects and apply the scroll on the menu. To the same rectangle footer can be used with content grouped for social icons and pin them.

  Thank you

  Sanjit

• Error - "Launcher requires the write permission for World of Warcraft key to locate and launch the game successfully. Please turn on write access to the registry key with the help of an administrator account"

  Original title - edit registry of the world of Warcraft Launcher to write

  I downloaded the patch more recent game in my computer, I did a cleanup of the system and tried to log in again, but now the States window it "(Launcher requires permission in writing for World of Warcraft key to locate and launch the game successfully." Please allow write access to the registry key by using an administrator account)", how can I access the registry to resolve this problem? Help please

  Hello DaTurtle !

  I had exactly the same problem, I have not found the sollution here...

  But I found how to fix very easy !

  You do a right click on the WOW icon at the office-
  then browse to the location of the file -
  It will appear a lot of files-
  Click on the WoW program file instead of the pitcher-
  will start your wow game-
  Log in as normal-
  then he will come to the top to update...

  After the update your wow will work as usual!

  It worked on my computer, please respond!

  Hans_Craft