need advice for upgrading application server

Similar Questions

• Guard application launch at the start of the appliance, also need advice for the implementation of network methods

  Hi all

  I'm new to the development of Blackberry and I'm writing a relatively simple application to run on 7.1.

  So far the development was interesting, I managed to create my user interface using resources online (mainly this forum), but today I tried to implement some of the network classes that I need and now I just met constant problems.

  I use Eclipse SDK 3.7.2 (the one that comes with the plugin RIM)

  First question:

  I'm not sure what I changed, but today I noticed that whenever I start the Simulator (by sim 9360) my application is started during the initial startup process. I don't think he did this before, but to be honest, I wasn't paying much attention. I think it starts at the start of the device is because I put a breakpoint in the constructor for my class from the main screen, which is hit before the Simulator happens even to the point where it is ready for user interaction. In addition, once it is ready, if I press the BB button, I see my registered application.

  I don't have it set to automatic start in .xml descriptior enforcement.

  I started this application on the HelloBlackBerry sample, here is my main method for the entry of the application:

  public static void main( String[] args ) {
          appSettings = AppSettings.fetch();
          // Create a new instance of the application and make the currently
          // running thread the application's event dispatch thread.
          HelloBlackBerry theApp = new HelloBlackBerry();
          theApp.enterEventDispatcher();
          //openConnection();
  
      }
  
  
  

  As far as I know, this is the only entry point for the application.

  More code

      public HelloBlackBerry() {
          // Push a screen onto the UI stack for rendering.
          mainScreen = new ScreenHelloBlackBerry();
          pushScreen( mainScreen );
      }
  

  Here is the method of. my class AppSettings fetch()

      // Retrieves a copy of the effective properties set from storage.
      public static AppSettings fetch()
      {
          AppSettings savedSettings = (AppSettings) _store.getContents();
          return new AppSettings(savedSettings);
      }
  

  Some of this code that I wrote myself, the persistence store cause the launch of my car?

  I tried to reset the Simulator to the factory settings, no change.

  All applications initialized during the startup of the device and then closed shortly after?

  Part 2: Need advice for the implementation of functions of network in the application

  I need to implement some methods that will retrieve data from a web service, and I also need to send data to this service. What I've read, the ConnectionFactory is the way to go. I want my application to make a request when the application is open and can check on a set interval. I didn't know exactly how to go about adding another thread for networking, I understand that network connections should not be created on the thread main event, so I tried to do this:

  The constructor of my class that implements screen (ScreenHelloBlackBerry), I use the following to create a modal dialog box to prompt the user for a username, I also try networking wire in the same segment of spawning:

          public ScreenHelloBlackBerry(){...initialize fields and managers, add it all together...then near the end
  
  //This will open the confirm dialog when the application is launched
          UiApplication.getUiApplication().invokeLater(new Runnable() {
                public void run() {
                    openConfirmDialog();
                  //start connection - Possibly broken
                    ConnectionThread ct = new ConnectionThread();
                    ct.start();
                }
          });
  

  I don't know if it's somehow OK to do, but it seems to work for what I need. I want a user who launches the application at the prompt, and if a user switch applications, when they come back they wondered again (unless they close the app and reopen it).

  Here is my ConnectionThread:

  public class ConnectionThread extends Thread
  {
  
      public void run()
      {
  
            ConnectionFactory connFact = new ConnectionFactory();
            ConnectionDescriptor connDesc;
            connDesc = connFact.getConnection("http://www.google.com");
            if (connDesc != null)
            {
                HttpConnection httpConn;
                httpConn = (HttpConnection)connDesc.getConnection();
                try
                {
                    final int iResponseCode = httpConn.getResponseCode();
                    UiApplication.getUiApplication().invokeLater(new Runnable()
                    {
                        public void run()
                        {
                            Dialog.alert("Response code: " +
                                          Integer.toString(iResponseCode));
  
                        }
                     });
                    httpConn.close();
  
                 }
                 catch (IOException e)
                 {
                   System.err.println("Caught IOException: "
                        + e.getMessage());
                 }
            }
      }
  }
  

  At the moment it has basically unmodified code from a sample that I found, I'll be retooling to meet my needs whenever I can make it work. I HAD this work to the point where, after the closed user confirm this dialog, a few moments later a an alert dialog appears with the 302 response code. I don't know what changed, but now it doesn't work at all, and if I try to scroll with the debugger, I can't past the httpCon.getResponseCode (). I've seen some mistakes earlier on "no record of service was set up", and I also had once a timeout exception.

  I'm sure I'm doing this wrong, but at the same time as I said WAS working, and now it is not. If someone has done this far, thank you very much for your time and advice are much appreciated.

  Also, should I try to start the thread of the network of the UIApplication class instead of the screen? There is currently very little happening in the class that extends UIApplication, do I spend most of my business logic out of the class of the screen and in the UIApplication class?

  Thanks in advance!

  Hi all

  Just to conclude this topic for those who are interested, I found an excellent guide to the implementation of networks in applications of BB, click here for a link.

  About my application being started at the start of the simulator of the device, I found that on a device real this behavior is not complied with, and in addition, the behaviour seems to have stopped after uninstallation and reinstallation of my Simulator.

  See you soon,.

• Need advice on upgrading forms 10.1.2.3 to 10.1.3.1. in r12.12.1.3

  Hello
  
  I've updated our system of 11-5-10-2 to R12 12.1.3.
  
  I completed all the steps except the 10.1.2 Oracle upgrade (Tools home) to the latest version
  
  CD $ORACLE_HOME/j2ee/home
  java-jar oc4j.jar - version
  
  Returns: -.
  [java $ applmgr@ISG-finr12-UAT House] - jar oc4j.jar - version
  Oracle Application Server containers for J2EE 10 g (10.1.2.3.0) (build 080228.2305.2133)
  
  So we seem to be in version :-10.1.2.3.0
  
  Where I am confused is the docs of upgrade and messages, I watched coverage applying the 10.1.2.3 patch - i.e. 5983622 - but this patch seems to be identical to the version that I have after 12.1.1 tech stack... install and upgrade the system of 11-5-10-2 to 12.1.3.
  
  Do I need to apply this patch?
  
  I also welcome your comments on my list below as well...
  
  Action plan
  --------------------
  Download the following patches
  
  5983622
  Patch 8919489 - R12. T2K. B.Delta.3
  9583541
  
  9593176
  
  7140392 (this is the bug for 7140405)
  7121788
  8557019
  
  8528194
  6497684
  7426842
  8602992
  6995251
  9357237
  10081297
  70169615917053
  6371228
  8300196
  Create merge patch for 10.1.2 HOME
  Create a Patch containing merger: -.
  8919489
  9583541
  
  1 stop middle-tier Services
  
  Apply the Patch merge for 10.1.2.3 forms a large stain
  This hotfix includes the fixes:-8919489 and 9583541
  
  Backup Oracle AS 10.1.2 Oracle_Home and record of the inventory (GLOBAL or LOCAL)
  
  Make sure that the inventory is oriented to the right place
  
  Apply patch 6800880 in the ORACLE_HOME 10.1.2
  Expect:-Oracle interim Patch Installer version 1.0.0.0.63
  
  Install 10.1.2.3.1
  (5983622 is last forms & report group patches) using Disk1 runInstaller (within plots)
  We need as 12.1.3 now?
  
  Stop OPMN 10.1.2 home (Installer OPMN starts after upgrade)
  
  
  Apply the hotfix to fusion for patches of forms 10.1.2.3:
  Applied patches: 8919489 (Patch is required for 9583541 - i.e. R12. T2K. B.Delta.3) and 9583541
  
  Apply an opatch out patches to 10.1.2 ORACLE_HOME:
  -----------------------------------------------------------------------------------
  
  7140392 (this is the bug for 7140405)
  7121788
  8557019
  
  9593176
  8528194
  6497684
  7426842
  8602992
  6995251
  9357237
  10081297
  70169615917053
  6371228
  8300196
  Apply Patch 9357237
  
  Redeploy the EAR of forms file
  
  Rebuild the executables of forms and reports
  Regenerate the Jar files
  
  Start the Services
  Connection and verify the upgrade (help-> by the way)

  So we seem to be in version :-10.1.2.3.0

  Where I am confused is the docs of upgrade and messages, I watched coverage applying the 10.1.2.3 patch - i.e. 5983622 - but this patch seems to be identical to the version that I have after 12.1.1 tech stack... install and upgrade the system of 11-5-10-2 to 12.1.3.

  Do I need to apply this patch?

  Yes this patch is 10.1.2.3.1 group of fixes - modernization OracleAS g 10 forms and States Oracle E-Business Suite Release 12 [437878.1 ID]

  For your plan of action, it should be OK as long as you cover all the patches in the docs.

  Thank you
  Hussein

• BlackBerry 8310 Smartphone of Smartphones (BB has been DEAD for upgrading applications that use the Device Manager)

  Hello, recently I wanted to install an application but got an error message saying AJAX is not supported on your platform - after checking the forums on this site, I found that I need to upgrade to 4.5.X and for that I downloaded from this site the "8310M_PBr4.5.0_rel52_PL2.7.0.55_A4.5.0.37 [1].

  When I connect the device to the computer, I got the message from device manager asking if I want to upgrade applications to current version,

  I did it-but suddenly during the upgrade process, my blackberry is turned off and since impossible to turn it on again, it looks like my smart phone is completely dead! There's just a red light on the top flashing...

  That's all just amazing, because I have no idea why this happened because I used this official site and Device Manager was the one I downloaded from this site for 8310 Smartphone

  Can someone HELP me please?

  Thank you

  PAM

  Great!

  You please resolve this thread by using the options on the star of the kudo?

  Thank you very much!

• need suggestion for buying a server

  Hello

  My name is Wendy. I'm working as an engineer IT infrastructure. My client wants to create an Infrastructure virtualized using VMware view horizon. And users will be zero clients. Users must have the high graphics for their application. I won't go with server Dell power edge T 620?... Please give some suggestions

  If all the graphics will be on the server, you need a server with a graphic solution high-end for VDI.

  http://www.Dell.com/learn/us/en/04/campaigns/PowerEdge-GPU

• Need help for upgrade VMware tools

  Dear team,

  I want to upgarde vmware for a WIN2000 Server, just want to confirm it will require no downtime to upgarde VMware tools?

  Concerning

  Mr. VMware

  Do a upgrade interactive you will get the option do not restart.

  You can also set the properties of VMs to upgrade the tools of the next time that you restart the server if it's more convenient.

• for the application server control console

  Hi all
  
  OS: OUL5 x 64
  EBS R12 12.0.6
  
  In the readme file of patch 7272722 session
  
  5.1.2 apply Oracle Application Server 10g Release 3 (10.1.3) Patch Set 4
  (10.1.3.4.0)
  The following procedure describes how to apply the set of patches:
  1. If you are applying to a 10 g 10 g Release 3 (10.1.3) Patch Set 4 (10.1.3.4.0)
  Module 3 (10.1.3.0.0) Oracle home and your system uses Enterprise Javabeans
  3.0 applications, then you must undeploy your applications before you apply
  the patch.
  
  
  The following procedure describes how to cancel the deployment of the applications:
  one.
  
  Connect to the Console of the Application Server under the same user name command
  than the one used for the original installation. If the application is deployed
  to a specific instance of OC4J, and then access the OC4J home page for the
  See also: "Introduction to Backup and Recovery" in the Oracle
  Administrator's Guide on the server application for more information
  on Oracle Application Server backup and restore.
  
  Question:
  
  How can I check if my application uses of EJB?
  How to connect to the application server control console to run the task above.
  My ebs url: http://prod.xxxx.com:8010
  
  Thanks in advance.
  Tom

  Tom,

  -How will I know if EBS r12 12.0.6 using the EJB or not?

  In my view, it is not applicable to the installation of R12, you can omit this step. If you have a stand-alone server Oracle AS10g and you must apply this hotfix, you must then check if the EJB is used or not.

  Kind regards
  Hussein

• Roadmap for Oracle application server

  I guess that Oracle will at some point to merge the two, it is the application server and the BEA WebLogic Server with WebLogic the main code source. Does anyone know of one such road map or the management of statement I can see (diagram or wording)?
  
  Thank you.

  Yes, they are combining the two product suites. They have a Webcast & a PDF preview

  http://www.Oracle.com/products/middleware/BEA.html

  Look for the link on the Web or PDF of presentation under subsection has combination of international calibre.

• I need ideas for my application

  I need ideas for my MultiApp app on the app world, we have feet to meters Converter, temperature converter, timer, stopwatch, alarm clock, and we need more ideas...

  Thank you, but I also have a twin brother, so I guess he can help me

• I need advice for an upgrade of the CPU... Please and thank you!

  Hi, I own a 076804U, with a T2060 lenovo3000 n100. I think the upgrade to windows 7 and 64-bit move. Can someone tell me what CPU I could jump up to which will work in this system? I know very little about laptops but I build my own desktop computers. It is to travel and I use it a lot, so buying a new laptop is not really what I want to do. But I want that all my systems to run the same operating system. Thanks for your help.

  I have the same model and just put in a T5600 who

  I bought on eBay. Works fine and windows 7

  is a pleasure to use compared to vista.

  The only driver I had to install was for the card reader.

• Need help for upgrading to Windows 7

  Original title: upgrade

  When I bought my computer it is pre-loaded with the French of Vista Home Basic version.

  I now want to upgrade to the new installation of Windows 7 (English) - will this facility simply on the Vista of origin and automatically be in English or will it still change the language? If this is the case, Windows 7 has the language options or will it once again an application?
  Or he will recognize the existing language of the operating system and go French?
  Thank you
  Richard

  You will need to do a custom installation. Windows 7 does not support cross-language upgrades.

  Upgrade to Windows 7 from the following operating systems is not supported:

  ·      RTM of Windows 95, Windows 98, Windows Me, Windows XP, Windows Vista®, Windows Vista Starter, Windows 7 M3, Windows 7 beta, RC of Windows 7 or Windows 7 IDS

  ·      Windows NT® Server 4.0, Windows 2000 Server, Windows Server® 2003, Windows Server 2008 or Windows Server 2008 R2

  ·      Upgrades on place of several architectures (for example, x 86 to x 64) are not supported.

  ·      Place of cross-language upgrades (for example, en - us en - us) are not supported.

  ·      Cross-SKU upgrades (for example, Windows 7 N to Windows 7 K) are not supported.

  ·      Upgrades from Windows Vista to Windows N, Windows K, Windows KN or Windows E are not supported.

  ·      Upgrades on place of type Cross-compiling (for example, the fre to chk) are not supported.

  ·      Pre-release in place upgrades across milestones (for example, Windows 7 RC to Windows 7 RTM) are not supported.
  For more details, see the link http://technet.microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  How to make a custom installation:

  Boot from the Windows 7 DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

  Please note that you will have to reinstall your applications and hardware drivers.

• Need help for upgrade of OATS worm: 8.01.0249 of OATS worm: 8.50.0260

  I currently have trouble Oracle Application Testing Suite for the upgrade from version 8.01.0249 to version 8.50.0260. The database for OATS is SQL Server 2000. I uninstalled the application worm 8.01.0249 completely. Follow-up by installing the worm 8.50.0260 applications. I configured the worm 8.50.0260 to point to the SQL Server 2000 OATS existing database so that it can be upgraded to the latest version. When I run the connection administrator on OAT test to upgrade the SQL database, I get the following error message "e Business - Manager database could not be updated. Please ensure that the user has the administrator rights for the database and that the entered password is correct. "The old version of the 8.01.0249 application connects very well with these credentials. Check the logs of information below.
  
  
  JBossService logs show the following results:
  
  INFO | JVM 1 | 14:30:06, 830 INFO [EmeHttpSessionListener] new session: id = created 724B3D04FFFDC2BBC996FFDD94C17A62 = kills Apr 07 14:30:06 2009 WST
  INFO | JVM 1 | 14:30:06, 830 INFO [EmeHttpSessionListener] session active time out: = 1800
  INFO | JVM 1 | 14:30:06, 830 INFO [[th]] action :--Action=/upgradeDatabase.do: LogonAction._upgradeDatabase)
  INFO | JVM 1 | 14:30:06, 830 INFO [[th]] action: methodLogonUser.
  INFO | JVM 1 | 14:30:06, 877 INFO [[th]] action: actionForward is null:
  INFO | JVM 1 | 14:30:06, 909 column not found ERROR [FieldManager]
  INFO | JVM 1 | 14:30:06, 971 column not found ERROR [FieldManager]
  INFO | JVM 1 | 14:30:06, ERROR 971 [FieldManager] [Microsoft] [ODBC SQL Server driver] [SQL Server] invalid column name 'LastRunDate.
  
  The server logs show the following results:
  
  2009-04-07 14:30:06, 830 INFO [com.empirix.eme.web.EmeHttpSessionListener] new session: id = created 724B3D04FFFDC2BBC996FFDD94C17A62 = kills Apr 07 14:30:06 2009 WST
  2009-04-07 14:30:06, 830 INFO [com.empirix.eme.web.EmeHttpSessionListener] session active time out: = 1800
  2009-04-07 14:30:06, 830 INFO [org.apache.catalina.core.ContainerBase. [JBoss.Web]. [localhost]. [th]] Action :--Action=/upgradeDatabase.do: LogonAction._upgradeDatabase)
  2009-04-07 14:30:06, 830 INFO [org.apache.catalina.core.ContainerBase. [JBoss.Web]. [localhost]. [th]] Action: methodLogonUser.
  2009-04-07 14:30:06, 877 INFO [org.apache.catalina.core.ContainerBase. [JBoss.Web]. [localhost]. [th]] Action: actionForward is null:
  2009-04-07 14:30:06, 909 ERROR [com.empirix.admin.tabs.utils.FieldManager] column not found
  2009-04-07 14:30:06, 971 ERROR [com.empirix.admin.tabs.utils.FieldManager] column not found
  2009-04-07 14:30:06, 971 ERROR [com.empirix.admin.tabs.utils.FieldManager] [Microsoft] [ODBC SQL Server driver] [SQL Server] invalid column name 'LastRunDate.
  
  
  Thank you
  Twinkle

  The OAT product databases are designed to upgrade successfully 2-3 trips to the top. You try to upgrade a database which belongs to a five version provided earlier, you will need to make a Service request on metalink and be ready to send the database to support.

• Need advice on upgrading and configuration of the OS on Tecra A6

  Hello
  I just bought a tecra A6 from ebay and it runs pretty slow so I want to upgrade a little. First of all he has windows 7 installed, so I think re-install to windows xp professional. Anyone know if I will find all drivers take charge, or what it will be a nightmare for me?

  Also I want to move to a SSD hard drive but I am a little confused with the 4 pin business poking out. For example this HD (see link below) work?

  http://UK.crucial.com/GBR/en/SSD/ct120m500ssd1

  someone said: you don't need the 4 pins?... What type of hard drive that I search for? which series...

  any help most welcome... want just a reasonably fast lappy which gives me internet, wordprocessing and small graphics... its got ram of 1 GB that I'll pass... maybe once I update the ram I won't need a new HD?

  any advice much appreciated

  concerning
  Col

  Tecra A6 is fully compatible for Windows XP Home edition, so there is no problem to find all the drivers, tools and utilities.
  On the Toshiba download page - http://www.toshiba.eu/innovation/download_drivers_bios.jsp
  Tecra A6 is listed in the archives.
  In my opinion there is no sense to install old WXP. It is no longer supported and Win7 works perfectly on this old model Tecra.

  In this old Tecra a SATA connector HARD drive and according to specification supported hard drives up to 120 GB so I think that this SSD can be used in your machine.

• I Iconia Tab A500, running 3.0, need help for upgrade by using a microsd card, got Acer download update

  I Iconia Tab A500 running 3.0, need help update, I downloaded the entire updaes list in the supprt of acer, all versions, 3.0, 3.1, 3.2 and 4., I read on the acer support somewhere I can use a microSD card to update my device, as acer provides automatically, when I try it says 'poor network connection '. moving instead of anthoer. ", I have to update all the updates that are listed, or can I only update, using the 4. 0? to get the last known update. I also downloaded, 'Documents, applications, drivers, patches and O.S... How do I intsaller all these updates, I think that running the lowest version available, please help me... Thank you in advance.

  There are some instructions step by step on the site, but basically you check out the file "update.zip" download, copy to the root of a FAT32 formatted microSD card, then start in recovery mode (press one of the volume buttons [which it depends if you are landscape or portrait mode] and hold, then the power press and hold). From there, you can choose to update in the zip file it finds on the map.

  It is important before you have the correct version of the update, it's different for different regions of the world, and you will not be able to upgrade the (for example) Brazil version from the US site.

• Need help for upgrading client ASA5505 EasyVPN

  I have a handful of ASA5505 deployed as client devices EasyVPN and want to update the software in one of them remotely. I can telnet and ASDM for devices, but I can not perform a software upgrade via the CLI / tftp or the ASDM. Any ideas on what I need to do to make this work?

  Found a solution

  Add

  TFTP server

  I then issued the copy tftp flash command