Need advice on my 5 c 'Notes' app iPhone

Similar Questions

• Guard application launch at the start of the appliance, also need advice for the implementation of network methods

  Hi all

  I'm new to the development of Blackberry and I'm writing a relatively simple application to run on 7.1.

  So far the development was interesting, I managed to create my user interface using resources online (mainly this forum), but today I tried to implement some of the network classes that I need and now I just met constant problems.

  I use Eclipse SDK 3.7.2 (the one that comes with the plugin RIM)

  First question:

  I'm not sure what I changed, but today I noticed that whenever I start the Simulator (by sim 9360) my application is started during the initial startup process. I don't think he did this before, but to be honest, I wasn't paying much attention. I think it starts at the start of the device is because I put a breakpoint in the constructor for my class from the main screen, which is hit before the Simulator happens even to the point where it is ready for user interaction. In addition, once it is ready, if I press the BB button, I see my registered application.

  I don't have it set to automatic start in .xml descriptior enforcement.

  I started this application on the HelloBlackBerry sample, here is my main method for the entry of the application:

  public static void main( String[] args ) {
          appSettings = AppSettings.fetch();
          // Create a new instance of the application and make the currently
          // running thread the application's event dispatch thread.
          HelloBlackBerry theApp = new HelloBlackBerry();
          theApp.enterEventDispatcher();
          //openConnection();
  
      }
  
  
  

  As far as I know, this is the only entry point for the application.

  More code

      public HelloBlackBerry() {
          // Push a screen onto the UI stack for rendering.
          mainScreen = new ScreenHelloBlackBerry();
          pushScreen( mainScreen );
      }
  

  Here is the method of. my class AppSettings fetch()

      // Retrieves a copy of the effective properties set from storage.
      public static AppSettings fetch()
      {
          AppSettings savedSettings = (AppSettings) _store.getContents();
          return new AppSettings(savedSettings);
      }
  

  Some of this code that I wrote myself, the persistence store cause the launch of my car?

  I tried to reset the Simulator to the factory settings, no change.

  All applications initialized during the startup of the device and then closed shortly after?

  Part 2: Need advice for the implementation of functions of network in the application

  I need to implement some methods that will retrieve data from a web service, and I also need to send data to this service. What I've read, the ConnectionFactory is the way to go. I want my application to make a request when the application is open and can check on a set interval. I didn't know exactly how to go about adding another thread for networking, I understand that network connections should not be created on the thread main event, so I tried to do this:

  The constructor of my class that implements screen (ScreenHelloBlackBerry), I use the following to create a modal dialog box to prompt the user for a username, I also try networking wire in the same segment of spawning:

          public ScreenHelloBlackBerry(){...initialize fields and managers, add it all together...then near the end
  
  //This will open the confirm dialog when the application is launched
          UiApplication.getUiApplication().invokeLater(new Runnable() {
                public void run() {
                    openConfirmDialog();
                  //start connection - Possibly broken
                    ConnectionThread ct = new ConnectionThread();
                    ct.start();
                }
          });
  

  I don't know if it's somehow OK to do, but it seems to work for what I need. I want a user who launches the application at the prompt, and if a user switch applications, when they come back they wondered again (unless they close the app and reopen it).

  Here is my ConnectionThread:

  public class ConnectionThread extends Thread
  {
  
      public void run()
      {
  
            ConnectionFactory connFact = new ConnectionFactory();
            ConnectionDescriptor connDesc;
            connDesc = connFact.getConnection("http://www.google.com");
            if (connDesc != null)
            {
                HttpConnection httpConn;
                httpConn = (HttpConnection)connDesc.getConnection();
                try
                {
                    final int iResponseCode = httpConn.getResponseCode();
                    UiApplication.getUiApplication().invokeLater(new Runnable()
                    {
                        public void run()
                        {
                            Dialog.alert("Response code: " +
                                          Integer.toString(iResponseCode));
  
                        }
                     });
                    httpConn.close();
  
                 }
                 catch (IOException e)
                 {
                   System.err.println("Caught IOException: "
                        + e.getMessage());
                 }
            }
      }
  }
  

  At the moment it has basically unmodified code from a sample that I found, I'll be retooling to meet my needs whenever I can make it work. I HAD this work to the point where, after the closed user confirm this dialog, a few moments later a an alert dialog appears with the 302 response code. I don't know what changed, but now it doesn't work at all, and if I try to scroll with the debugger, I can't past the httpCon.getResponseCode (). I've seen some mistakes earlier on "no record of service was set up", and I also had once a timeout exception.

  I'm sure I'm doing this wrong, but at the same time as I said WAS working, and now it is not. If someone has done this far, thank you very much for your time and advice are much appreciated.

  Also, should I try to start the thread of the network of the UIApplication class instead of the screen? There is currently very little happening in the class that extends UIApplication, do I spend most of my business logic out of the class of the screen and in the UIApplication class?

  Thanks in advance!

  Hi all

  Just to conclude this topic for those who are interested, I found an excellent guide to the implementation of networks in applications of BB, click here for a link.

  About my application being started at the start of the simulator of the device, I found that on a device real this behavior is not complied with, and in addition, the behaviour seems to have stopped after uninstallation and reinstallation of my Simulator.

  See you soon,.

• IM switching to iPhone 5 toXperia D6616 Z3 and none notes Notes The iPhone app

  I went from 5 toXperia D6616 Z3 iPhone and any notes Notes The iPhone app

  first of all, I guess a need an app for android which is compalabe with notes, but I see a lot of them, but wading in waste is so time consuming.

  When I said the transfer I don't get the message no notes transferred every thing otherwise successfully transferred

  A great app to your Z3 or any android is to continue to Google, you can access your notes on any device

  https://play.Google.com/store/apps/details?ID=com.Google.Android.keep&hl=en

• Inspiron s 660: hard disk failure. Need advice please.

  Long story short my sister gave me a s Inspiron 660 she received as a gift a few years back (legitimate).  She said that was no longer working and I could.  I suspected a faulty hard drive and after several diagnostic tests later confirmed the WD Blue crashed the original; complete failure. Now, here's where I need advice:

  1. when it has received, it came not with a physical disk from the Windows 8.0 operating system.  It was pre-installed and then upgraded through its work of departmental to 8.1 it.

  2. I can't access the code of Windows because it is in the BIOS.

  3. I have a hard drive to work with Windows 7 installed and tried hooking laptop to see if he should realize that he was a long shot at best.  As you have probably concluded he was not recognized.

  4. I thought wiping one of my hard drives and do a clean install of Windows 10.

  Question: With a new hard drive (or possibly an SSD) would work #4 or I still have problems with the BIOS and Windows embedded product code?

  Question: What do you suggest I should try?  It's a nice little system and everything is clean and stable.  I have someone who needs a system, but can't afford it, and I thought I'd give something that would meet its needs.

  Thank you.

  ROUTE29

  Re: 4. I thought wiping one of my hard drives and do a clean install of Windows 10.

  Yes, it should work, but to do this, you must either buy an OEM copy of W-10, which has its own product key.

  http://www.BestBuy.com/site/Microsoft-Windows-10-home-64-bit-Windows/4423102.p?skuId=4423102

  https://softwarekeep.com/Microsoft-Windows-10-Home-Edition-32-bit.html?gclid=CNXh5ev3wc8CFQGSaQod5A4LMQ

  The upgraded version free of W-10, Windows 8, 8.1, 7 ended July 26.

  Bev.

• need advice on which version of Dreamweaver to purchase

  Hello.  I need advice I can buy it on which version of Dreamweaver.  I have an iMac v. 10.10.5.  I want a monthly fee, want just a one-time software purchase so that I can build my own personal Web site

  Creative cloud is simply a distribution model & payment.  You always download & install the software on your computer as you always have.  You always save the files on your local hard drive, you always. Nothing has changed in this regard.

  CS2, 3, 4, 5, 5.5 is no longer supported or sold by Adobe.  If you buy software from another source in line do so at your own risk.  The pirated versions were circulating these last time and they do not work.  In some cases, they contain malware that could compromise your computer.

  You have a modern operating system.  This is another reason to use current software. Several older versions required Rosetta which Apple is more included in its press releases.  Purchase of old copies similarly ligit software does not mean that it will work on your system.  Let's face it, the stuff you used 8 years ago are useless today because Apple & Win continue to change operating systems.

  I use a little media with DW CC.  It is a very fast, modern code editor.   In fact, Adobe will soon integrate DW CC 2016 version supports.

  Nancy O.

• Best network design... Need advice on the best use of NIC

  I'm new to the concept of Distributed Switch so I need advice.

  Our current environment is the result of a vCenter 4.1 and ESXi 4.1 Enterprise Plus, but we are just using the standard vSwitch (1 for vMotion/Console and 1 for virtual machines).  When the distributed switch came out, we were warned that a vDSwitch could cause us problems if the server vCenter or database is down.  We could not connect directly to the host and make network changes because the vDSwitch is set in the database.  That's why we stayed with the Standard vSwitch only.

  Our farm is quite small, only 5 hosts but we run around 100 mV in this regard.

  We use currently servers HP DL385 G7, which have 4 cards integrated network, and we have a map of installed NETWORK 4 port card.

  I use the NETWORK 4 EtherChannel ports and trunk card to our virtual machines.

  I am currently using only 1 network card integrated for vMotion and 1 for the Service Console and they all have two of the other defined as secondary.

  This configuration has worked very well for us, but I realize that the latest version of ESXi has some new features that we could use.

  NEW CONFIGURATION

  I'll put up a new vCenter 5 and ESXi 5 environment and I am considering using the switch distributed instead of the usual vSwitch we use.  I'm also eager to take advantage of the multiple NIC vMotion.  All our cards are 10/100/1000 MB capable... No. 10 GigE.

  I think... use that map 4 NETWORK ports for my EtherChannel/trunk for just as our virtual machine before, but this would be set to vDSwitch1

  The mixture of my 4 other integrated ports, it's causing me grief.  Should they be on a standard vSwitch or vDSwitch?  Use 2 ports for vMotion and 2 for the Console?  I really thought to use 3 ports for vMotion and 1 Console port.  I could put the Console port to use one of the vMotion ports such as adapter of standby is... I'm so confused freaking!

  Any recommendations on how I should put up?

  Hello

  Given that you can't split your vmnic for each vSwitch I would recommend either keep configuration simular with the knoweldge if a whole nic fails, you will take a failure or as autumn has already been mentioned on 'Origin Port ID'. Lets do this out and give a little better example

  Current configuration

  vSwitch0

  VMNIC0 - NETWORK interface integrated - Service Console

  VMNIC1-Onboard NIC - VMotion (different IP or VLAN?)

  VMNIC2-Onboard NIC - VMotion (different IP or VLAN?)

  VMNIC3 - NETWORK interface integrated - VMotion (eve of Console of Service) (different IP or VLAN?)

  vSwitch1

  VMNIC4 - extension PCI NIC - Etherchannel trunk - PortGroup - VMNET

  Extension VMNIC5 - PCI NIC Etherchannel trunk-PortGroup - VMNET

  Extension VMNIC6 - PCI NIC Etherchannel trunk-PortGroup - VMNET

  Extension VMNIC7 - PCI NIC Etherchannel trunk-PortGroup - VMNET

  Now, to captured to eliminate any single point of failure that you could do is break your Etherchannel trunk and back this vSwitch from Port ID and Setup VMNIC2, VMNIC3, VMNIC4, VMNIC5 as vSwitch1 for your VMNET. Then the cable to multiple switches eliminate any single point of faiulre. If your standard configuration would look like this

  vSwitch0

  VMNIC0 - on - Board Service Console

  VMNIC1 - Board - Vmotion

  VMNIC6 - extension PCI NIC - Vmotion

  VMNIC7 - extension PCI NIC - Vmotion (standby Service Console)

  vSwitch1

  VMNIC2 - VMNET

  VMNIC3 - VMNET

  VMNIC4 - VMNET

  VMNIC5 - VMNET

  So to finish any request for psyhical nics on this particular configuration the Port ID of origin essentially around robins. If during your first VM is online it will be use VMNIC2 and nic forever, until a failure, in which case he will grab the next nic online. When your second VM is online it will use VMNIC3 forever, until a failure and so on. This still will give you around the same way through to as far as networking is concerned. However if you are attached to the trunk, etherchannel 4 GB and can obsorb a failure in case of failure, the network card 4 ports can stay.

  Distributed switching Setup

  Allows you to see how you can switch to distributed switching

  Let's start first of all, you can have EVERYTHING in switches distributed even the service console port if you wish. The resason why some people do not like to do this with the service console port is because IF your database is broken you cannot make any changes to the distributed switch. However it will not prevent a feature to your distributed it switches simply means, you can change them. Also if just getting worse and your DB has been declining for some time and you REALLY need to make a change to the service console port you can go into the console and change back to a standard vSwitch if need be. This allows the said look at some standard configs, you can work

  vSwitch0 (Standard)

  VMNIC0 - Service Console Port (Port Original ID or standby)

  VMNIC4 - Service Console Port (Port Original ID or standby)

  vSwitch1 (Standard)

  VMNIC1 - Vmotion

  VMNIC5 - Vmotion

  Distributed switch

  VMNIC2 - VMNET

  VMNIC3 - VMNET

  VMNIC6 - VMNET

  VMNIC7 - VMNET

  Now this config using originating port ID and breaks your etherchannel if you want to keep your configuration with the etherchannel it can look like this

  vSwitch0

  VMNIC0 - NETWORK interface integrated - Service Console

  VMNIC1-Onboard NIC - VMotion (different IP or VLAN?)

  VMNIC2-Onboard NIC - VMotion (different IP or VLAN?)

  VMNIC3 - NETWORK interface integrated - VMotion (eve of Console of Service) (different IP or VLAN?)

  Distributed switch

  VMNIC4 - VMNET

  VMNIC5 - VMNET

  VMNIC6 - VMNET

  VMNIC7 - VMNET

  Other changes to the configuration may also put the vmotion in distributed witch the VMNET but you would to VLAN, or you could create a second Distributed switch and put it as long as there are 2 network cards. It can go either way. The main advantage of a distributed switch is that it brings all of your settings with you in any host. So trade ect all your VIRTUAL networks is really easy to reproduce if a new host is brought online, all you have to do is to add the new host network cards in the distributed switch and your config is done. With that in mind lets look at the service console. This console is always configured on EACH Setup program that out you of the box if not that you really need to have these parameters transported on several hosts that is another reason why most people just don't. VMotion is up to you, I have seen and configured two ways, it all depends on how simple you want to keep it or think of switching / vlaning / port of groups.

  If you have any questions please let me know, I hope this has helped

• Need advice. Kindly Guide

  Hello
  
  Don't know if this is the right place to ask such questions...
  
  I need advice.
  
  I have 5 years of expereince in Oracle. (4 years in Oracle PL/SQL and 1 year while Oracle DBA). The company's management now wants to move me in the security line Oracle.
  
  I'm confused. Should I stay and work as a DBA as backup recovery, db monitoring etc or should I pass security Oracle online.
  
  I wonder is there really a difference between a DBA or be an Expert in Oracle security? isn't security Oracle in Oracle DBA?
  
  My apologies if I asked something stupid... but I need advice from gurus.
  
  Thanks in advance.
  
  Kind regards
  ISHR

  SID3 wrote:
  Actually, I'm pretty well aware of what the Oracle security

  So I don't understand your doubts.

  ... I think that Oracle security is essentially a subset of Oracle DBA.

  I wouldn't say that.
  Security must not take lightly, and I know people very strong knowledge dedicated to who, without being 'subset' of DBA. This is a rather complementary position.
  But even once, that depend on your company, the company you are involved, etc.

  Nicolas.

• Need advice on how to create the report

  I don't know how to do this, so I ask for advice from the gods apex...
  
  Here is the question, I have two tables I need to combine the info from. not a problem in his car. I can do it. but here's the question. in table A, I have some data such as title, theids, disc_id, etc... Table B contains fullname, theid, emplid
  
  now in the table A column "theids" is filled with apex as a multi select list. the values in the column is therefore something like 48; 3; 88
  
  He got these identification numbers of the Table B (popup lov) query that returns theid of the one of the person.
  
  now, I need to create a report that will be used in an excel download and what they want is a line by disc_id and they want the most useful "cost" in the field where to run the "theids." It is instead of:
  
  disc_id title theids
  101 the 48 test; 3; 88
  
  they want:
  
  disc_id title Theids
  101 N33456, N3457, try N43562
  
  so I'm a bit stuck, I can understand how to write a sql using instr to get something like this:
  101 N33456 of test
  101 N3457 of test
  etc.
  
  but this isn't what they want. so I think I need to create a package to do this and some sort of return values. the problem is that I can't figure out how I can replace the 48; 3; 88 to N33456, N3457, N43562
  
  I'm still new to this kind of things pl/sql and apex sorry if this appears to be an obvious answer.

  If you have a look at this example:

  http://HTMLDB.Oracle.com/pls/OTN/f?p=31517:138

  You'll see there

  SELECT empno, ename, job, mgr, sal
    FROM emp
   WHERE INSTR(':'||:p138_select_empno||':', ':'||empno||':') > 0
  

  and

  p138_select_empno is a multiple selection list displaying the names of the employees and containing the string of nosm as 7888; 8900; 3499.

  This info is enough to get to a function like this:

  CREATE OR REPLACE FUNCTION get_string (p_string IN VARCHAR2)
     RETURN VARCHAR2
  IS
     v_string   VARCHAR2 (4000);
  BEGIN
     FOR c IN (SELECT ename
                 FROM emp
                WHERE INSTR (':' || p_string || ':',
                             ':' || empno || ':'
                            ) > 0)
     LOOP
        v_string := v_string || ', ' || c.ename;
     END LOOP;
  
     v_string := LTRIM (v_string, ', ');
     RETURN v_string;
  END;
  

  and use this function in a report like this:

  SELECT get_string (:p138_select_empno)
    FROM DUAL
  

  Denes Kubicek
  ------------------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  ------------------------------------------------------------------------------

• I'm recently back from Berlin where I accidentally left my iPhone 6. My friend tried to send it to me; However, he was returned by customs. Need advice on getting my iPhone 6 sent from Berlin to California.

  I'm recently back from Berlin where I accidentally left my iPhone 6. My friend tried to send it to me; However, he was returned by customs. Need advice on getting my iPhone of Berlin has been sent to California.

  You'll have to talk to the German customs and find out what their requirements are to send an iPhone.

• Why is it updated crashing of ios10 of Notes app?

  Notes app crash after I have updated to iOS 10.

  Try enabling/disabling of Notes on / off under settings > iCloud.

• iOS 10.1 (Notes App) cannot access local notes

  Just upgraded iPhone 6s more iOS 10.1 of the latest version of iOS 9.x.x

  Used Notes app all the time without ever upgrade to iCloud version.

  Notes were always stored locally.

  Never signed in iCloud for Notes app.

  Now after the upgrade to iOS 10.1 I am unable to access my notes.

  Whenever I start the application notes I'm only given the opportunity to UPGRADE NOTES.

  

  How do I access my local notes?

  Can't update my notes to send to the cloud.

  Never received the memo that I loose the access to my notes after upgrading to iOS 10.1 without upgrade to iCloud.

  To the best of my knowledge, the upgrade does not require that you store your notes to iCloud. It updates of features such as the ability to add documents, photos, etc. As long as you turned off in the settings of Notes > iCloud, they should continue to be stored locally.

• iOS 10 Notes app detects more phone numbers

  I used to use the Notes iOS app as a convenient way to store multiple access to phone numbers to work.

  If you have added a phone number it would detect that and you could just click the link to dial the number.

  In iOS 10 it stopped working.

  Links of # in the Notes app phone are no longer assets and if I try to add a new phone # s, they are not detected as being able to compose.

  Hello, elbenoit!

  Thank you for joining the communities Support from Apple! It seems that you are having problems with call function in the Notes. I know how it is important Notes work properly. First of all, read this article with the steps to restart your iPad, iPhone or iPod touch.

  The next thing you might want to try going in settings of the iPhone and then Reset. Once there, tap reset all settings. This will reset the settings of the iPhone, but does not erase personal information such as pictures, music or contacts. However, it will remove a connection Wi - Fi and VPN settings, so do not forget, you have these settings and passwords to ready for the start of the iPad to the top.

  If this does not work, it would be a good idea to make sure that there is not a problem of software as the cause of this for you.

  1. Read this article to know the steps for backing up your iPhone, iPad, and iPod touch.
  2. Use this article for steps to use iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory settings.
  3. Once this done, set the phone like new and the phone to see if the issue is still being tested. Follow this link to restore your iPhone, iPad or iPod touch from a backup

  See you soon!

• Notes app works is not after update ios10

  Hı, notes app not opening after ios 10 updated on my iphone

  I had the same problem. I opened and he immediately closed. It's easy to fix:

  Open settings > iCloud and disable iCloud for Notes. A prompt warns you that this will delete all the notes in your device iCloud. Confim invites her and open your notes application.

  Return to the settings and activate iCloud for Notes again.

  Open your Notes app again. It will now download all of your notes to iCloud and completely function. He did at least in my case. :-)

• Notes App crashing on the iphone 6 after upgrade to iOS10

  After update to iOS10, the notes app was crashing. I noticed the application crashes as soon as it tries to establish the connection to the cloud. The app will work normal if I open the Notes app in airplane mode

  Do you have anyone experience this problem or knows how to solve this problem?

  I'm after that, I have the same problem.

• iOS10 questions - Notes app crashing

  After update to iOS10, the notes app was crashing. I noticed the application crashes as soon as it tries to establish the connection to the cloud. The app will work normal if I open the Notes app in airplane mode

  Do you have anyone experience this problem or knows how to solve this problem?

  I think that it is failure.