Need battery for Equium A60-181

I'm after a new battery for my notebook equium a60-181.
The mounted battery is a PA3384U-1BRS.
I looked on the toshiba web site and cannot find this model.
As he was replaced by another model, if yes what a number of battery should I look for.

Hello, my friend. I see you are new in the forum. Welcome ;)

Now to your question:
You can order all the compatible parts and ASP support in your country. I think that guys order it directly from the Toshiba.
Anyway, the European Toshiba site contains a beautiful site on the options and accessories.
You will find lots of devices and parts which are included in the different categories and are compatible with Toshiba laptops.

Check it out

Tags: Toshiba

Similar Questions

  • Need new battery for Equium A60-173

    Hey guys, I am looking for a battery for my laptop Equium A60-173, but I can only find them for the satellite series even if they have the same battery product number.
    Then would it still be ok for prchase bettery satellite for her?

    Thank you.

    The names of the different specifications are a bit confusing.
    The Satellite A60 Equium A60 and portable very similar. To my knowledge, the satellite was delivered in the UK.

    I studied a little this framework seems to be compatible PA3382U-1BAS 6450 mAh

  • Need motherboard for Equium A60

    Hi, I am looking for a motherboard for my laptop, it is a model of P4532/256 / Equium A60 40GB not. PSA67E-00200D8J.
    Could someone tell me what is the reference number of the card mother or even where I would be able to get an a?

    Thank you very much Rob

    Well, you have 2 choices;
    You are going to buy a new motherboard that cost a small fortune or you try to perform a search on the popular auction site for a second hand Equium A60 (Satellite A60) or second hand motherboard.

    All parts and also the new motherboard can be ordered from the ASP in your country.
    Technicians could directly control this part of the Toshiba.

    So it s you the choice now ;)

  • Updating BIOS for Equium A60-181

    Hi, according to the toshiba site there is a new update of the BIOS for my laptop.
    I was wondering is it worth the update, unfortunately, there is no information
    provided regarding the bugfixes or improvements? Also can I use the
    Windows update tool or use the bootable CD, it's just I'm not sure
    flashing Windows XP, except if it is a procedure without normal fault?

    see you soon,

    Richard S.

    Hi Richard

    Richard you have some problems with this device? If everything works properly I don't see a reason any BIOS update.

    If you think that the update of the BIOS is necessary, you can try Windows based Bios update but please check the first Description of the Toshiba BIOS update before you continue.

  • Tips for an A60 - 181 RAM change - need information:------.

    I have an Equium A60-181 according to the specification, this is a P4 3.20 GHz HT with 2x256MB DDR RAM FSB 533 MHz and ATI 7000 IGP graphics processor.
    Since I bought it 5 years ago, I've had random blue screens of death, the corruption of the system folder (necessary to re - install using the DVD of recovery of product 2 times) although I implemented with her for many years.
    Now this week it blue screens so many times (and green) with different error messages that, after verification, it with memtest86, I had confirmed my suspicions the RAM is faulty.
    I have found what I believe, it's slot compartment memory but I can only find 1 x 256 MB of RAM DO not 2 modules and for some reason it's FSB PC2700 333 MHz DDR RAM 533 MHz as advertised.
    Anyone know where to find the other RAM I opened to all other panels, but all belong to the wireless adapter and it has connections associated with.
    Also is it normal to find a RAM with a speed that is located under the advertised FSB? I am still a bit confused about this because if I had to buy a new memory module, I need to correct type because I've heard quite matched DDR makes Windows unstable.
    In any case, I remove the memory module is visible that the machine always starts up, but with only 256 MB RAM, however if I turned it in his unstable state with the lack of the module it would turn on and stop instantly.
    It seems obvious from this behavior that the RAM problem is one inside, that I cannot locate and probably fixed to the motherboard.

    So my questions are the following:

    Where is the other module DDR 256 MB, do I have to strip my laptop out to have access to it?

    Assuming that I have to replace the two modules DDR RAM is compatible with this particular model?

    Given the age and the specifications of the laptop, this return to Toshiba would not be a viable option so I'm more than happy to fix it myself. If someone could recommend some links for a repair site or perhaps a repair I would really appreciate it.

    see you soon,

    Richard S.

    Hi redhawk,.
    some machines have a ram installed under the keyboard...
    and some machines have ram installed directly soldered on the motherboard...

    I think that it is not the ram...
    Renew the thermal grease on cpu and gpu.
    in most cases, this fat dry out and cause failures...

  • Need a new mothherboard for Equium A60

    I tried suggestion given in the forum but I am always sick, I think I need a new mothherboard for Equium A60, I searched on the Toshiba site but tere does'nt seem to be links or place where it is said you can buy a home, HELP!

    As much as I know, that you cannot order parts for laptop direct from Toshiba.

    You can do this in some independent electronic store, perhaps by approved maintainer Toshiba or on eBay. I recommend you check out eBay. Here you can find many hardware components for various Toshiba laptops.
    With a little luck you can find mainboard for your model of laptop also.

    Check it out.

  • Equium A60-181 (PSA67E) - cannot find the display driver

    Due to problems with some games I did experiments with other ATI drivers for my laptop.
    It turns out that their support for Open GL is scandalously broken so I tried rolling back the drivers.
    Unfortunately Windows doesn't let me do it because I need the original driver files so tried to download on the Toshiba support page.
    Well although it seems that the Equium A60 - 181 aka PSA67E does not appear as a product more also any attempt to seek A60-181 or PSA67E displays empty hits Unlike Google or Msn.

    What happens here? Please tell me Toshiba did not hold for this laptop isn't exactly new or old it is still worthy of driver / BIOS update support especially when needed.

    Richard S.

    Akuma is right. All the notebooks are listed in the archives.
    Check it out.

  • Equium A60 - 181 Win XP: card incorrect RLAN - icon notification taskbar

    Hello world

    Ive took my Equium A60-181 for quite a while now and its been fairly reliable, sound always connected via WiFi to my home network.

    Very recently, however, the icon in the tray system for network connectivity was incorrect. He said always I am not connected to the network... but I am, because the internet works and I can still access the network drive that is located on another computer on the network and network printers.

    Why is the system status bar tells me that I am not connected to the network when I am?

    Any help will be greatly appreciated.
    And Happy New Year.

    Rhys James

    Hello

    I presume that you have assigned the LAN TCP/IP address and gateway manually parameters and these parameters are not set to automatic. Am I wrong?

    The same message appeared to me. I connected my laptop to the other PC and changed the TCP/IP address settings.
    It was the reason of this message in the taskbar.

    All simply set it to auto again and you will get rid of this annoying message.

    Best regards

  • Equium A60 - 181 und external monitor

    Hi I have an Equium A60-181 with connected Ati graphics card in and monitor external 19 "CRT. While the monitor seems to work I ran into a few problems. By turning on the monitor XP prompted me to install drivers I assume that they are for the monitor in question sheet etc.

    It seems in any case that I'm unable to change the resolution or refresh rate of the screen is set to 1024 x 768 @ 60 Hz. I changed the display properties and selected reverse, but when I OK/apply the cursor goes back to 1024 x 768 and the refresh rate is 60 Hz - huh?
    I restarted XP and still have this problem I even Device Manager check for yellow markers so now I'm at loss here is a common problem with Ati?

    Any recommendations would be appreciated.

    see you soon,

    Richard S.

    Hi Richard

    I'm not 100% sure but I think that the resolution of 1024 x 768 max for external (second) monitor is restriction of graphics card. Is this the situation even if you use an external monitor just without screen laptop (FN + F5)?

  • Equium A60-181: Win XP does not start successfully - the BSOD reboot

    Hello.

    I have an Equium A60-181 which has an operating system problem.
    Loads of XP logo at the beginning, when it happens to show the log on screen, it is a quick blue screen of death error, and it restarts.

    I tried to go into safe mode, but it blocks on atisgkaf.sys.

    Is that what I can do to save the operating system?

    How can I start to diagnose if it's a hardware problem?

    Thank you, Lawrence

    Hello

    The atisgkaf.sys file belongs to the graphics card driver.
    But as Akuma has proposed, the Windows operating system does not load 3rd party in safe mode drivers.
    This is why the ATI graphics card driver should not affect the start-up procedure.

    However, this is only my personal hypothesis and believe me; nothing is impossible, so a hardware problem might be possible.

    But just a question;
    Have you tried to reinstall the OS?
    The installation process goes smoothly through the unique installation steps?

    I think that the new installation of the operating system is a good idea to find out if it is a hardware or software problem.
    Maybe you should try it

  • Replacement of the hard disk for Equium A60-155

    I need to replace the hard drive in my equium A60-155. I need to know what is compatible with this model and if the brand of the drive is important in compatibility. For example should be a drive hard toshiba or is it possible to others.

    Any help would be greatly appreciated.

    Hello

    You n t need to install a HDD in particular of Toshiba. You can also use disk of another company.

    It is important that you use a HARD drive with support for hardware specifications.

    I found these useful discussions on the replacement of the HDD on the Satellite and Equium A60:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=23770&MessageID=87207
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=22183&MessageID=81930

    Satellite A60 is very similar to the A60 Equium and so the two series use the same hard disks

  • Need information about Equium A60

    Hello
    I'm looking to upgrade of RAM on my laptop which is an Equium A60 (PSA67E-001004NO). I need to know how fast my motherboard supports... I posted a question a while back and got the impression that my laptop can take up to 533 mhz, but I confirm other locations and had the idea that my laptop supports 333 mhz. I need to know the correct value of that my motherboard supports. If its 333 mhz or more on...

    One thing more I need to know is possible we can control the configuration this laptop has, because there is nothing on this satellite on the net or the Toshiba site...
    I remember seeing a page on which all the hardware and pre-installed software Details of Equium A60 PSA67E-001004NO have been on the net but I can't remember where I saw it...
    If anyone can help somehow?

    Hello

    Your laptop is 256 MB internal memory and a location is available to expand the memory. I found the information that your device can handle with max 1280MB.

    The compatible memory modules are:
    PC2700 256 MB (PA3311U - 1 M 25)
    PC2700 512 MB (PA3312U - 1 M 51)
    1024MO PC2700 (PA3313U-1M1G)

    If you want to check the numbers on Google and you will find all the info on these modules. I have not the time now to check it out for you.

    Good bye

  • Drive recovery for Equium A60-157 PSA67E

    Has anyone got a copy of the disc recovery issued with an equium A60-157 PSA67E as I am trying to get this laptop for work and unable to get its hotkeys control and be able to work.

    I think I've worn out my wellcome with Equium forum and technical appeal but it's somewhere I myself lack of understanding on this subject.

    I loaded all recent downloads listed on their site, but always impossible to get these functions to work.

    So can you help me please...

    David

    Hello

    Why you n t install a new Windows OS on this laptop?
    Missing drivers can be downloaded from the page of European driver of Toshiba.
    All drivers are available!

    The recovery disc can be ordered for this model of laptop because it s too old.
    Clean install OS Win + drivers is therefore the only option

  • Where to find the recovery for Equium A60 CD

    I recently bought a laptop Equium A60 but the seller didn't have the recovery CD or other CD that comes with it.

    Could someone tell me where I can get a copy please?

    Thanks in advance!

    Hello

    I think that it is a question more. And the answer is;

    . Contact the ASP in your country for a new Toshiba Recovery CD.

    By the way; You should first check the forum for a similar question because like I said above; It is a question asked. This has been posted 10,000 times here in the forum ;)

    Good bye

  • Graphic 3D MathCad for Equium A60 problem

    Hi all

    I have problems with Mathcad MCad (2001 - 12 Mcad) work on Equium A60. After trying to do any kind of 3D terrain (land surface, for example) Mathcad crashes. This problem is only on my laptop. How can I solve this problem?
    Marina

    Hello Marina.

    Well, I put t have ideas why you machine has had problems with this software, but first of all, you should try to update the graphics driver. If the problem of images fixed the same, so you should contact the manufacturers of MathCAD. Maybe they got patches. I found this site: http://www.mathsoft.com/services/technical_support/

    Good bye

Maybe you are looking for