Need driver for the DVD-ROM in my Satellite A100-812

Similar Questions

• Satellite L505 - installation of Windows 7 can't find driver for the DVD

  Hello

  I bought a Satellite L505 with Windows 7 home 64 bit. Now, I want to install Windows 7 Professional 64 bit. However when the installation starts he reports that it cannot find a driver for the DVD.

  Who can help

  Concerning

  P. Engels

  Hey,.

  If you do a search on Google you will find a lot of results on this error message and in general it s associated with the middle of the installation (DVD itself).

  Do you use an original disc of Microsoft Windows 7, or is it a copy to a friend?

  You should only use the Microsoft original disks with valid software.

• 526 KB for the DVD-ROM contents, but in the project is empty? How to remove

  Very strange.  My previous projects say under disc info that there is 526 KB for the DVD-Rom content.  I don't know how to remove it.  So I thought I would try the Adobe Dynamic Link into a new project.  I check the Build and there is 526 KB for the DVD-Rom content.  And I only made the video in yet, no menus!

  So I thought I would start a new project in Encore without ANYTHING imported.  And when I check, there is 526 KB for the DVD-Rom content!  But there is nothing there!  How can I remove the DVD-Rom content?

  You can not

  As far as I know, this isn't 'really' rom content, it's fresh General

• No DVD-ROM after recovery - Satellite A100-289

  I recently had my A100-289 expedition in for repair. A few days later the unit returned to me with a new motherboard.
  Unfortunately my OS has not started, so I got it from the DVD.

  Once you have completed the recovery process, Windows MCE prompted with the "new hardware found" - Assistant, who wanted to install a driver for the DVD drive. Usually you don't need drivers for these, do you think?

  After searching in vain the net for several hours, I tried to recover once more, then maybe the problem would disappear by itself, but unfortunately this was not the case, not even after the third recovery.

  I tried to install on a clean install disc that I used on my desktop before, just to see if it works and then uninstall it. What can I say? It didn't work anyway :(
  I am writing from said computer laptop on which I have installed as secondary to Mandriva Linux 2008 operating system. The DVD player works perfectly here.

  I concluded it must be a software problem, which has to do with Windows maybe, there is a way to solve it, but I don't have a working solution yet, although I tried to uninstall and reinstall both driver and drive several times without success.

  Any ideas?

  Hello

  First of all if you are able to install one operating system and then the CD/DVD drive works and surely it s not a hardware issue.
  Then you should check the Device Manager after installing the recovery CD if there is no yellow exclamation point.
  Then you must remove the drive from Device Manager and should access the registry.

  It to completely remove the Upperfilters and Lowerfilters from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  and then restart the laptop.

  Good luck

• Driver for the CD-ROM: HL-DT-ST RW/DVD GCC - T10N ATA has stopped working

  Tried to fix it but couldn't:
  error message: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

  Hello

  Code 39 means that the driver is corrupted or missing.

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  --------------------------------------------------------------

  Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
  are you can reinstall the 'old'. Many use Windows default drivers however some special aura
  ones. Also check the website of the manufacturer of the car.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Hope these helps.

• Satellite A200 - need driver for CD/DVD drive

  Hey people.

  Recently installed WXP Pro on my laptop A200 PSAEC, so I'm now in dual boot XP and Vista on my laptop.

  Problem is that I have all the drivers doesn't work on XP and everything works perfectly, but when I tried to burn a DVD, Nero said the recorder cannot burn DVDs. In 'My Computer', the drive shows up as a DVD - RW drive, but when I insert a blank DVD, it says CD drive. The drive shows up as "TCSDcor" CD/DVGW TC - L6 #2D "" in Device Manager. I searched a driver, but it is impossible to find an exact match for this drive and there is no driver optical drive on this section of driver from the Toshiba site. The only thing I found is an executable file of the firmware upgrade, but it throws an error saying that it is the wrong drive.

  Anyone got any ideas?
  Any help would be greatly appreciated!

  Hello

  You don't need a new driver for CD/DVD drive because it s a part of the operating system. So, you won't find one.

  I think you should try to remove the upper and lower filters in the registry. I did the same thing a few days ago, if I also had problems with my CD/DVD player and it worked for me! :)
  See this document from Microsoft:
  http://support.Microsoft.com/kb/314060

• Need driver for reader DVD SD-C2302

  Hello! I m trying to get the driver for my DVD player a SD-C2302 and I can´t find in the web page Toshiba´s. could is it someone, please, tell me where I can find it?

  Thank you.

  Hello

  Why do you need the driver for a DVD player?
  As far as I know the drive uses the standard Windows drivers and it s not necessary to install any other drivers.

• Windows Update seems to be downloading wrong driver for my DVD-rom

  My dvd - rom was working perfectly until one day when I logged on my laptop, a little saying that the driver has been updated appears at the bottom of the screen.  I couldn't stop this update and when he had finished I could play is no longer the game CD or DVD.  I went to Device Manager and could not roll back the driver.  The name of the pilot was interrupted by many @ signs, which made me suspect it was not the real thing.  Since then, the only time where my DVD worked was when I updated for DivX Plus and who seemed to install the original driver, as the name on the Device Manager is now allowed in @ signs and I could play DVDs and games.  It lasted until the next update of Microsoft, when everything returned to the wrong driver.  As it has been the installation of the updates, I could hear the DVD rom drive, limit the several times, which seemed a little strange.  Someone at - it ideas about what is happening here?  When I try to update this fake driver I tells me that it is the most recent version.

  Hello

  Sorry didn't see your response earlier, alerts are sometimes outlandish.

  REMOVE you (all) devices as indicated at the top of stage 1?

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Where can I find a driver for cd/dvd rom for a hp compaq presario f700 laptop. ?

  MY PILOT JUST DISAPPEARED AND I can't READ DVD, S or CD or BURN MUSIC /.

  Hello

  Check with HP, their drivers support and documentation online and ask questions in the forums on
  known issues.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =================================================================

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Drivers for the DVD - ROM SD-R1312

  Hello
  First of all: I am a new user, just create an account; Greetings from Switzerland.

  I'm looking for the latest drivers for my cd drive: DVD - ROM SD-R1312 and couldn't find on toshiba sites.

  Does anyone know the correct link for downloads. Windows XP/SP2

  Thanks for help

  Birke

  Hello Birke and welcome to the forum. ;)

  In general there is no driver to be installed for the optical disc drive.
  It will be much easier to help you if you explain what problem you have with optical disc drive.

• Satellite L40 - need driver for the modem on high definition audio bus device

  Hey there!

  I have a little problem with my Satellite L40-143 (Modell Nr.: PSL40E-04E00LGR).
  I changed from Windows Vista to Windows XP Professional and found that all need drivers, except a "device on high definition audio bus modem.
  The drivers I found on the Toshiba page don't work anymore.

  I would be very grateful for all the good ideas.

  Thank you ^ ^

  Sayo

  Laughing out loud. Hey Buddy what s the problem
  You have no sound on your laptop or you cannot burn a CD with your CD/DVD drive?

  The fact is that DON T need all the drivers for the CD/DVD drive. The operating system uses Microsoft own driver!
  If you want to burn media, you must install a burning like Nero for example software!

  Good bye

• Tecra R840 - need driver for the button control / stop Touchpad

  Which driver supports the switch for the touchpad?

  Hello

  If you ask a software / driver, then you should also publish information on your installed system.
  I assume that you have already installed the touchpad driver, in order to use the function keys, you need to install the VAP (value added package) as published by Liam

• HP Elitebook 2570p: need driver for the device system of Base and BMC20702A0 on HP Elitebook 2570p (Windows 7 Pro 64-bit)

  Hi-

  I just installed Windows 7 Professional on my HP Elitebook 2570p, and Device Manager, I'm missing the drivers for the device Base and BMC20702A0 system.

  I went to download HP driver and downloaded page 3 recommended for chipset drivers, but that has not helped.

  Here is the list of the categories of driver for my HP model from the HP Web site.  Where should I go next door to download the drivers?

  Thank you!

  

  Hello:

  You need these drivers for these two devices:

  The media JMicron card reader driver allows the card slot multimedia integrated in the laptop models running a supported operating system.

  File name: sp63637.exe

  This package contains the Broadcom Bluetooth driver and software for models supported that are running a supported operating system. Broadcom Bluetooth 4.0 driver is required to enable the Broadcom Bluetooth 4.0 devices and is compatible with Broadcom Bluetooth 3.0 and earlier versions.

  File name: sp66402.exe

• Need driver for Optiarc DVD RW AD 7580 s drive for Windows Vista 64-bit

  I just bought a new Lenovo Ideapad Y550's.

  Everything works well except the drive Optiarc DVD RW AD 7580 s. I checked the configuration of the pilot and found that a file system 32 called cdrom.sys driver has been installed.

  What is the correct driver for a 64-bit Vista system? In a few weeks, I'll move from Vista to Windows 7. Will it then a new driver?

  Where will I get the right driver for my 64 bit Vista system?

  Help, please.

  Well, I took it to the center of service, and in about five minutes, they put it right.

  Asked about this, they said that it was a problem with the 'settings '. They did not specify.

  Now, everything's fine.

• Need driver for the wireless network adapter

  I have an Acer Aspire 3680 2022 computer laptop and I need the driver for a network RTL 8188 S wireless adapter. I can't find it anywhere. I use Windows Vista Ultimate Edition.

  It is unusual for a USB device does not find its drivers automatically. You have all the documents with him?

  You can try this http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=21&PFid=48&Level=5&Conn=4&DownTypeID=3&GetDown=false&Downloads=true