Driver for the CD-ROM: HL-DT-ST RW/DVD GCC - T10N ATA has stopped working

Similar Questions

• Drive DVD SD-R5112-NEB has stopped working - need a compatible

  Hello.

  My Player DVD SD-R5112-NEB has stopped working. Please notify compatible replacement, possibly upgrading to faster drive.
  Thank you. Scottowner

  Upgrade procedure is not the same for each laptop model and it is very important to know what model of laptop you have. You can also view s manuals for your laptop and I hope that you will be able to find a list of compatible optical disk drives.

  Bye and good luck!

• Once the programs are open a window pops up to say "program has stopped working". Even the programs that are running in the background when starting up are close. Help?

  Yesterday I connected my laptop and when I tried oppening a program a window pops up say "program has stopped working". I opened the control panel to start the troubleshooting, and another appeared window "Control panel has stopped working". I tried to open microsoft word and another window popped up, it is true, that you guessed it "word has stopped working". Does anyone know why all of a sudden nothing works?

  Hello

  try a SafeMode system restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• y drive DVD RW Optiarc AD7530B has stopped working

  CD/DVR came out of my labtop now put again and he want to open

  Hi Bill, Korean

  ·         What version of the operating system is installed on the computer?

  ·         Did you do changes on the laptop before the show?

  ·         What is the brand and model of the laptop?

  Follow the steps in the article.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

• Ive got windows XP every time I try and install a game like rome total war demosheild pop ups and says "demoshield has stopped working".

  I don't know why my PC did this for me as I install games in the past, I tried to install the games, are not ancient Rome SpaceInvasion.fr and medieval SpaceInvasion.fr.

  PLEASE GET BACK TO ME AS SOON AS POSSIBLE

  Hi RyanTemple,

  ·         You have changes to the computer before the show?

  Follow these methods.

  Method 1: Try to install the game as administrator.

  HOW TO: Use the RUN AS command to start a program as an administrator in Windows

  XP

  Method 2: Follow the steps in the article.

  How to solve problems when you install or uninstall programs on a Windows computer

  Method 3: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

• Where can I find the driver for a CD-Rom drive?

  Where can I find a driver for the CD-Rom of a desktop Pavilion Slimline drive (model # AW014AV #ABA). I can't find it on the HP site.

  I have a yellow alert symbol in Control Panel-> devices & Printers next to my computer and the icon for HP LaserJet Series 110, and when I troubleshoot or the other, he says that there is a problem with the driver for the CD-Rom drive.

  Chaya Cooper

  Hello:

  There are no drivers available for download as part of the database windows driver and the advent of Windows 2000 in 1999.

  I recommend that you use the automatic correction of Microsoft to the free address on the link below and see if that clears up the issue.

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/

  If automatic adjustment does not work, try the manual fix in section "Let Me difficulty it me ' on the link below.

  http://support.Microsoft.com/kb/982116

  Paul

• HP CSI Shell has stopped working - cannot install the printer driver

  I just bought a printer LaserJet MFP M127fw Pro, but the installation of the pilot program still crashes. I tried 3 different modes of driver installation: the installation CD install HP Smart (USB) and download online, but I keep getting the same error.
  
  10-15 seconds after I start the driver installation, a pop-up Windows appears, advising me that:
  "HP CSI Shell has stopped working".
  
  I called HP customer care and they post in the computer section of the Support Forums.
  
  Does anyone have a solution to this problem?
  
  I have a HP Media Center PC with Windows 7 64 bit.
  
  

  Update:
  
  I tried the feature "Add a printer" windows default in Control Panel, and my printer is finally functional - only when used wireless. However, if I connect the USB cable from my printer, it will be recognized as a different printer and always unsuccessfully installed the drivers for it.
  
  If it works wirelessly, it is good enough for me.

• the Windows Firewall has stopped working

  I tried the system restore to just before it stopped working

  Hi geoffrey,.

  System restore would have been my first suggestion, so that was an excellent choice on your part.  I would try it again maybe a few days earlier just to be safe, he did not start before you really notice or before, it became clear, as it is certainly the simplest answer, but frankly, I doubt that it will be more effective (but who knows - he can come back works perfectly and we are both happy, it was considered).  He also suggested that you know a little about computers, so I can provide instructions that contain everything you need but I will not go into nauseous detail unless you get stuck on a step and then you should post any problem you encounter and I will provide more help.  If you should post, don't forget to answer as many questions and include both the results of the proceedings or reports or copies or screenshots of screen that you can at the same time, so we can work on what to do then if none of this made the turn.

  How do you know if what she has stopped working?  Do you have an error message (if so, what was the full and exact message Word for Word, including all codes)?  You have more than one firewall installed on your system (like that which is part of Norton Internet Security, Comodo, or something else)?  What security programs do you use and that you have installed (all names and versions)?  What version of Windows you are using (for example, 32-bit Vista Business SP2 or other - please be precise otherwise)?  When this occurred and did you a software or a hardware changes (additions, deletions, upgrades or anything like that) since two weeks before the problem (if so, precisely what has been done in as much detail as possible)?

  Do you get this Center security or firewall Windows itself?  If you are using XP, post back with answers given that there is a limit to the options how can I cover without knowing the basic information.  If you use Vista or W7, go to Security Center or action center and check to see if there is a problem with the notification of the firewall or it's on.  If it's not on, it shows the details or links containing information about the problem?  If Yes, go to these links and copy the information and post here, so we can look at.

  Then go into firewall Windows itself (on the left side of the screen) and confirm that there is a problem.  If she too says it is disabled, click on change settings.  Make sure the firewall is turned on - if not turn it on, click on apply and then click OK and confirm that it starts and begins to work.  If it does not start, it provides an error message (If Yes, what is completely and exactly Word for Word with all codes)?  Click Advanced, and verify that all network connections are checked - make if all are not and click OK, then again try to turn on the firewall.

  If this does not work, go to start / Control Panel / Administrative Tools / Services and then highlight the Windows Firewall and click Open.  Click dependencies and go to each of them and make sure they are started and automatic.  Otherwise change it to automatic and start them.  If it is impossible to do, check their dependencies and do the same until you reach the end of the chain of dependence.  Now return to Windows Firewall and make sure that it is set to automatic and started.  Then restart.  When the system returns, return to the service and confirm that the Windows Firewall is started and automatic.

  Now, go into Windows Firewall and again try to launch and see if it lights.  Go to the center of security or Action and check that the firewall is enabled and works.  If so, the problem can be solved.  Just to be sure, restart and check the firewall to ensure that it is on and working.  If so, who should be the one.  But we do not know why it stopped, and if the problem may come back, then we must redouble efforts to find the cause or confirm that there is no problem.  Moreover, if the above did not work and Windows Firewall is still off, here's what you should do in any case.

  Go to start / Control Panel / administrative tools / Event Viewer and look for error messages regarding the Windows Firewall (there will be errors).  Look in system first and then in Applications.  When you find the error or errors, click on it for details, copy these details and display them in your next reply.  Well, they can help us identify the source of the problem and there a fix for it.

  We will check your system and hard disk for corruption files and try to fix it:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  , Type sfc/scannow go and let it run.  It will scan and try to the difficulty of some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  They tried to set itself to run at the next reboot.   Answer Yes and restart to run the program.  It will scan and attempt to resolve any corruption or bad sectors on your hard drive and remove especially as a potential cause.

  Then, we will confirm this is not caused by a malware any.

  Update and run a full scan with no matter what security software you use, and remove or quarantine everything you find.

  First, try the following programs if you do not, because they can help. I recommend you download, install, update and run full scans with Malwarebytes:http://www.malwarebytes.org/ and SuperAntiSpyware:http://superantispyware.com/ and then run a full scan of Microsoft Security:http://www.microsoft.com/security/default.aspx. This may or may not remove the infections, but will probably not correct the damage caused by them. Even if they or your current AV software seem to work or indicate that you are not infected, you should not completely trust in them and must continue with the recommendations that follow (so it's up to you if you want to try them first, or just ignore all this and get help from an expert you really need as described below).

  Correctly and completely remove these infections can be complex and often require manual removal procedures (which may or may not be entirely effective either). Even if they work, I suggest what follows in any case, so that we can start it (you can ignore the methods above if you want it really is the way forward, but it won't hurt to them for trying).

  Please follow these recommendations of JimR1 - MVP compliments:

  You are running Microsoft Security Essentials?

  If Yes: start here - https://support.microsoftsecurityessentials.com/ and select the link that says - I think my computer is infected - and support and select the option for phone, chat or email (options vary depending on the region)

  If you are in North America, you can call 866-727-2338 for a free Microsoft Help for infections of virus and spyware.

  Otherwise:

  You can start here: https://consumersecuritysupport.Microsoft.com/ or here: http://support.Microsoft.com/contactus/cu_sc_virsec_master?WS=support#TAB0 for the help and support for malware infections.

  If this does not work, or that they can't help, try one of the compliments of forums-remove malware following PA Bear - MVP:

  I can recommend the assistance of experts available in these forums: http://spywarehammer.com/simplemachinesforum/index.php?Board=10.0 http://www.spywarewarrior.com/viewforum.php?f=5 http://www.dslreports.com/Forum/Cleanup http://www.Bluetack.co.uk/forums/index.php and http://Aumha.net/viewforum.php?f=30

  I hope this helps.  If none of this worked, then after return with answers to ALL the questions above (especially the first paragraph) and the results of all the procedures and the test that you tried in as much detail as possible and with two copies of reports or screenshots (as you prefer).  Without this information, we do not know where to go next without guessing or recommend a more radical proposal that may be required.

  Good luck!

• Control Center cataslyst error "the host application has stopped working".

  Hello

  Is anyone know the cause & how to fix error "catalyst control Center - host application has stopped working"?

  Hello

  1. when exactly you get this error message?

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  Method 2:
  Try to update the latest drivers for the graphics card and check if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  It will be useful.

• "MessagingApp.exe has stopped working" error when I turn on the computer.

  In the last few days I have been making a "MessagingApp.exe has stopped working" message every time I spend on the laptop. When I go to "All programs" all windows and Yahoo programs are red in color. I did a search for "MessagingApp.exe" but it is not found, but when I looked in 'Program Files'-'alternative E-mail' I found it but it will not run. I can't connect to Yahoo Messenger.Can help you? I have Windows Vista Home Edition thank you, McEvor

  original title: error MessagingApp.exe

  Hello McEvor,

  1. don't you make changes to the system before the show?

  2. Since when have you been faced with this problem?

  Try the following steps to try to get the fixed number.

  Step 1:

  Try to put the computer in a clean boot state to see if the same message appears

  A clean boot helps eliminate software conflicts. Visit the link below to learn how to perform a clean boot.

  http://support.Microsoft.com/kb/929135

  Note: Once the troubleshooting is over; reset the computer to start as usual in following step 7 from the link above.

  Step 2:
  An analysis of security and verification for infections.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  1. you can run a virus scan online from the link given below and check if the problem persists.

  Microsoft safety scanner

  2. in addition, make sure that you have installed on your computer, antivirus software was last updated so that it works correctly.

  If the problem persists, please contact support messenger yahoo from the link below for more support.

  http://help.Yahoo.com/l/us/Yahoo/helpcentral/

  Hope the helps of information provided.

• Implementation error "ConsolePrint has stopped working" on Server 2008 for printing from any windows client PC 7.

  I have a domain system ADS in my organization. Server, but also the client PC is in the same domain. These last days we receive error "consolePrint has stopped working" then we print from any client PC.  We use the laser printer, printers DMP. Printers are connected directly to any customer PC and shared with other computers.

  When we print from a client, whenever we get this popup error on Server 2008 "ConsolePrint has stopped working".

  Please help in this regard.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• In Windows 7, the message "Windows Explorer has stopped working" on a daily basis

  My hard drive on my Dell E5420 died in November, and I had to get a new one and reinstall everything.  Since I was doing a Windows Exporer has stopped working message on a daily basis.  It seems not to be any rhyme or reason to when it occurs.  The details of the problem are below...

  Description

  Application of vulnerabilities path: C:\Windows\explorer.exe

  Signature of the problem

  Problem event name: APPCRASH

  Application name: explorer.exe

  Application version: 6.1.7601.17567

  Application timestamp: 4d672ee4

  Fault Module name: StackHash_1062

  Fault Module Version: 6.1.7601.17725

  Timestamp of Module error: 4ec4aa8e

  Exception code: c0000374

  Exception offset: 00000000000c40f2

  OS version: 6.1.7601.2.1.0.256.48

  Locale ID: 1033

  Information additional 1:1062

  More information 2: 10627f8784ab27b0a288ca8932b95911

  3 more information: 01fb

  Additional information 4: 01fbd1f85968f86da1c3a5e6eaa045cc

  Additional information about the problem

  Bucket ID: 57749939

  Hello

  Welcome to the Microsoft community. According to the description of the problem you get the message "Windows Explorer has stopped working" on a daily basis.

  I'll help you with this problem. I suggest you follow the steps in the article.

  Explorer Windows stopped working

  Note: After completing the steps in the clean boot troubleshooting, follow the article How do I reset the computer to start as usual after a clean boot troubleshooting section to start the computer to a Normal startupmode.

  Error: Windows Explorer has stopped working

  Note: You must take the backup of the data before performing any installation of windows.

  I hope this helps. Let us know if you need help with Windows related issues. We will be happy to help you.

• "Dell Support Center has stopped working and microsoft has closed the program in order to find a solution."

  Original title: I get a box indicating the dell support center has stopped working and microsoft has closed the program in order to seek a solution, then nothing happens, and the box comes up again and again?

  I get a box on screen telling me that the dell Center support has stopped working, and microsoft has completed the program to check the solution

  It happens every 5 minutes but never comes up with a solution

  Hello

  Refer to this article and follow the steps to help solve this problem.
  Dell Support Center has stopped working error appears
  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=427832

• In Vista, you receive the error message "Vandenberg Clyde Punjab Scottsdale Columbia Watertown Hebrides has stopped working" when the windows sartup

  I get this error message when starting windows - the message is:

  Vandenberg Clyde Punjab Scottsdale Columbia Watertown Hebrides has stopped working and I'm not that mean?

  and since i ' v got this message I can't use internet explore properly and when I lick the icon to lunch the internet explore I have a blank page, but if I do a right click on the internet icon one select run as administrator, it works without any problem can someone help me?

  Ahmed atta

  Egypt

  Hello

  Please let us know if you are facing problems when you use Internet explorer on the computer and is the fixed startup error number.

  Use the method to send the snapshot to the question below.

  Use capture tool to capture screenshots

  http://Windows.Microsoft.com/en-us/Windows-Vista/use-Snipping-Tool-to-capture-screen-shots

  Use SkyDrive download collected files and after shot/screenshot.

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65/

• Need driver for the DVD-ROM in my Satellite A100-812

  Who can help me with the driver for the DVD-ROM in my notebook? It's a rug * a UJ-850 s. These days he asks that whenever you load a disc (CD or DVD) if I want it to be formatted. All that s what it does. I tried to find the driver for peut-t, but I find on the Web. Can someone help me solve this problem?
  Thank you

  Hendrik

  There is no such thing as a pilot for ODD (optical disc drive). It uses the standard Microsoft driver. Try please remove the disc from the Device Manager, then restart the laptop. After reboot the ODD will be detected and installed it again. Check please if the problem persists.

  If yes I recommend you to install the driver for DVD-RAM (DVDForm Utility). You can find it on the download page of Toshiba. I use the 3.0.9.0a version. and it works perfectly.