Need Driver to install the card reader USB for PE-Design program

Similar Questions

• Satellite A210 - 151 - Downgrade Vista to Xp-need Driver 4 - FN keys & card reader

  As already explained in my topic, I've finally downgraded from Vista to Xp

  -My card reader not working - tried different cards... nothing!
  -Also-keys Fn don't work... loaded each Hotkey-utilities (all languages) for Xp...
  He tells me that I can not install on this system!
  -> Tried all drivers Xp!

  I could really use some help here

  because if it works, I did everything on my laptop

  Installed card reader driver? Check http://eu.computers.toshiba-europe.com and download

  -Utilities, SD
  -Card reader Controller

  For FN keys, you need to install the common modules and maybe a BIOS update is required.

• CARD READER USB FOR DESKTOP HP PAVILION 500 - C60?

  I have a new 500 - C60 HP Pavilion desktop computer, but the front card reader does not accept the largest flash Compact Flash (CF) card.  I have an old USB multi-card with four different card slots, which accepts the card see  Would this setting work satisfactorly?

  Thank you

  shamrock838

  Hello @shamrock838,

  I understand that your desktop HP Pavilion 500 - c60 PC does not support the biggest Compact Flash Memory Card and you are curious as to whether or not you can install an USB multicard Reader which accepts the memory card see First of all, you have reason 7 - in1 media card reader did it installed does not supported CF memory card, but it supports the following cards:

  • Digital safe™ (SD)
  • Secure Digital High Capacity (SDHC)
  • SDXC
  • Memory Stick
  • Memory Stick Select
  • Memory Stick PRO
  • Memory Stick MagicGate

  I don't see why you can't connect the 4 - in1 USB multicard reader you have. Until the operating system detects and installs, you should be fine.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• There the card reader audio for S10-3s?

  I can't find the correct sound card for XP drive. I have tried several disk provided by lenovo Web site, but each of them does not work. Could someone help me find the reader except from the following link:

  http://consumerdl.Lenovo.com.CN/userfiles/driver/en/downloads%20and%20Drivers/S10-3/XP/IN7AUD18WW1.e... (succeed to install, but still no sound).

  http://consumerdl.Lenovo.com.CN/userfiles/driver/en/downloads%20and%20Drivers/S10-3s/XP/IN2AUD22WW1... (do not settle, device not found)

  Thank you very much for your help. Finally, I find what is my problem. It's OK to install the original drive in win7 driver CD, but I didn't install the AHCI drive before, so the sound card does not work well.

• install the printer with usb for premium office jet 6500

  What are the steps to install an office jet 6500 aio Printer printer using a usb connection

  Hi palmtreebob

• I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I have sandisk cruzer blade USB key

  Hi Rohit,

  Thanks for posting your query in Microsoft Community Forum. I understand that your USB drive is having problems of compatibility with your computer, but I would like to learn more about the issue in order to provide you with better assistance.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. When do you get exactly the error message?
  3. Have you tried to connect to any other computer on this flash drives?
  4. Your USB key works on other computers or have you tried to connect to different USB ports on this computer?
  5. Is the pen drive getting detected in the case or you are able to access the drive folder in the window of the computer ?

  The question may arise if the currently loaded USB driver has become unstable or damaged, or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows
  • Diagnose and automatically fix the Windows USB problems

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.

  Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, go to method 3.

  Method 3:

  This method will install the latest drivers from device to your USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  More information: Update a hardware driver that is not working properly

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Satellite A200-PSAEO: could not find the card reader driver Vista

  Hello.

  I have the Satellite A200-PSAEO and I can't find the drivers for the card reader for Windows Vista.

  Any ideas?

  Thank you very much.

  Hello

  What of the installation of the Flash Media Driver v 2.0.0.6 released on 31-01-08?
  The Flash Media driver is driver for your bridge Media Slot.
  This slot allows you to insert an SD card, Memory Stick (Pro) or xD picture cards.

  You can find on the page of the European driver Toshiba Satellite A200 PSAE0 download area.

  ;)

• Portege A600-175 - failed to start the card reader device

  I got a Portege A600-175 running windows XP SP3 with a problem in the card reader device. Insert an SD card, it makes the sound that USB devices usually do when inserted (and also when it is removed) bur it doesn t appear on my computer. Do the Device Manager, it appears as a disc with an exclamation point on it and in properties, I see the error this device cannot start. (Code 10)

  I ve already removed the device and let windows find and install again but the problem persists.

  Thanks in advance for looking into it.

  Hi fjdc,.

  I think that you should look for an update to the driver on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Remove the old version, restart the computer and install the version of the Toshiba page.

• My Cac card reader worked for a week and now the computer is not recoginize... told me that it is not connected?

  I installed the drivers and the correct software.  My computer has accepted the CAC card and it worked fine for about a week.  I tried to use today and the computer does not even recognize the card CAC reader was plugged.  I käpt asking me to ensure a card reader has been sonnected.  I tried to run a repair on the software, but that doesn't seem to help.  I rebooted the computer several times and even tried other card readers.  I could use some help.

  Hello

  1. what operating system do you use?

  2 did you change on your computer?

  3. did you check the card reader with another computer?

  4. you use external USB card reader or the card reader integrated?

  I suggest you to follow the steps and check

  Step 01:

  I suggest you follow the steps from the link below.

  a. click Start, click Control Panel.

  b. click on system and security.

  c. click System, click Device Manager in the left pane.

  d. click the adapter card reader device, right-click on the adapter.

  e. tab driver , click Uninstal.

  f. click ok when you are prompted.

  g. now, go back to Device Manager and click Scan for hardware drivers.

  It automatically detects the drivers.

  Note: If the drivers are not found, then I suggest you to download the new drivers from the manufacturer's website.

  Step 2:

  I recommend you to update the drivers and see if it makes a difference. You must be logged on as administrator to perform these steps.

  a. open the Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) in Device Manager, look for the device and then double-click the device name.

  c. click on the driver tab, then click on set to update driver and follow the instructions.

  See also: hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

• Internal card reader & USB ports stop working in Windows 7 64 bit - HELP

  This seems to be VERY popular problem between Vista and 7 users. I can't find the right difficulty any where. I have a HP Pavilion of D5200T running Win 7 Home Premium 64-bit. (I can provide more specific if necessary specifications). I read a few other posts in this forum with exactly the same problem as me, I tried the suggested fixes - most of them anyway - and my problem persists.

  This is the story of the kind: bought PC Cognac nine in June 09. It came with Vista Home premium 64-bit. On the front panel, I have the HP 15 in 1 reader cards and below that another panel with micro/headphones, 2 USB ports and 1 port Firwire catches. They all worked great worked great, no problem at all. I bought Windows 7 and improved in October 09. These two USB ports and card reader have been in place since then. I turn on the computer or restart works and they. Slide into a car SD, CF, whatever it is. Little green light turns on, windows automatically opens on the screen indicating the contents of the card.

  The card reader is no longer everything first. It may be 15 minutes later, perhaps hours. I slip on a map and still get the little green light but nothing on the screen. As if no card has been inserted. 2 USB ports will do the same thing, just much less frequently. I step a USB item and I have an error message saying: is not recognized or not installed properly. If I restart - they are all back to work very well.

  So... this problem only started after the Windows 7 installed, then it is clear to me is where the problem lies. When card readers or USB is in their State of non-working, I'll go to Device Manager and see that they are always listed, and there is no indicator of errors.

  This is what I remember by train so far, without success. I uninstalled devices from the Device Manager, driver too. I tried unplugging them from the card, restart, reconnected, reinstall. I tried different plugs on the motherboard. I can't find the latest drivers. The courses are MS 21/06/06 6.1.7600.16385. I think I tried all utilities integrated in Win7 to try and diagnose, and none of them produced no results. I tried to disable the sleep function. I even reached out to HP support, and the best they have resulted so far is that the card reader is bad. They are sending me a new, but I do not think that this problem will be solved.

  As I said, I see this problem or similar to many, many forums but I have rarely seen a happy ending where it was fixed. Someone at - it the key? Help, please.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 64 bit without recognizing an SD card or SDHC card through the bult in the card reader.

  12/15/10 my computer Desk Top read SDHC and SD cards without problems through the media built in card reader, but the small import window to the lower right of the screen wouldn't do anything, I have to disconnect & reconnect to get rid of it.
  Then, on 18/12/10 if I inserted the card SD or SDHC card & NOTHING happen on the monitor. It was as if nothing was plugged. It would appear click on the Start button > computer as a removable storage but it wouldn't ask to import the photos. No window pop up or anything.
  If I have a SD or SDHC insert card in a USB adapter so that connected on a USB Port, it works fine. I tried with four different memory cards.
  Why the computer OS does not recognize that the inserted card & even the computer itself would know that it was inserted because there is a small light that flashes when something is plugged. But he doesn't want to import and MARK photos directly from the construction in the card reader?
  I was on the phone with gateway 3 times by train to update ALL the drivers & try the system restore on the eve of thatI know it actually worked.
  I even spent an hour and 45 minutes on the phone with a Tech. Microsft via the remote control and still could not solve the problem. Everyone wants to blame others, but I see a lot of people have very similar problems.
  My computer was purchased there are 4 1/2 months. It's a gateway FX6840-03e. It is a very powerful platform but suddenly something happened and now it will not import pictures from the card reader. I have to import via USB!
  The strange thing is that my sister told me that exactly the same thing happened to his computer about a week and half ago. It is configured to download & install updates automatically. I'm set up just to be notified to download and install myself.
  Why backup restore & would still work on a date that we both knew for positive that our computers were working very well?
  So we need help! Anyone have any solutions or suggestions? The only assistance we have received so far was "Re-install the entire operating system."

  Well Finally I found the problem of not being able to import images. After so much work and all try, same re-install windows7 operating system
  It turns out this is one brass bit inside the construction tabs in the card reader was not working properly! Just a. That's all it took. It would show that the card has been installed, the light on the computer itself would show a card has been installed, but he wouldn't ask to import.
  THANK YOU ALL for your help and suggestions! It was great.
  The computer is fairly new but it had a flaw inside the card reader. So, if anyone knows the same check the connection problem.
  Once again thatnk you for your help!

• Tecra S10: BSOD when inserting adapter duo memoystick in the card reader

  Hello

  I have a Tecra S10-12 b PTS3BE.
  As soon as I insert a memorystick duo desk with or without a memorystick inside in my card reader, I get a BSOD.
  Similar to the user in this topic: http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=165760
  Unfortunately the user did not post a link for the driver that solves the problem.
  I've updated to the latest driver for the controller card on the Toshiba site reader: Ricoh 3.54.04 however no change.
  Can someone suggest another pilot to try? I tried searching the site Web of Ricoh download but have not found anything useful.
  Any help appreciated as I now have to use the USB cable to transfer my photos :(
  FYI, SD card works fine.

  Hello

  I have no idea of what OS you use but the card reader controller
  Driver for Win XP downloaded on 15-10-09. It seems that it s among the newer versions. This time it s a 3.54.04.

  I think that you will not find a more recent version

  PS: Check if you BIOS is up to date. If this is not the case, the update.
  Moreover, as far as I know that not all card sizes are supported maybe you should try another card with the smallest size.

• Update Windows 7 breaks the card reader, causes random crashes

  Hi all

  I have a Satellite A500/026 that came with Windows 7 64 bit. Recently, I found only one) the card reader no longer works, and b) just after startup, I get an error message indicating that a component of software from Toshiba is broken down. Both developed these symptoms after a Windows Update, but I can't be sure that one.

  The card reader works OK if I start a live CD of Ubuntu, but do not work on Windows, so I guess the problem is with a Windows driver that has been "updated" during a Windows Update.
  Is there a set of drivers Toshiba I have to re - install after a Windows Update, or should I just wait that Microsoft fixes whatever-they-broke in whichever-update-it-was-that-broke-it?
  Any other ideas?

  Leigh.

  Try to reverse both previous OS using System Restore tool and see if this will fix the problem.
  For Windows update use important updates only. Do not install the updates options.

  Do back the OS first and send feedback.

• Error code: 0x8007045D when transferring files to the card reader.

  Original title: Error code: 0x8007045D

  Error code: 0x8007045D when transferring files to the card reader. Lost files. Running Windows 7.

  Hi Bernard Major,.

  1 did you change the permission for the files you are trying to copy?

  2. What place you are trying to copy the files?

  3. are you able to copy the same files on another computer?

  You can try to copy files to another location on the computer and check.

  Step 1:

  I recommend you to check if you have enough permission on the card reader to transfer files.

  See the link to apply authorization:

  What to know before applying permissions to a file or folder

  http://Windows.Microsoft.com/en-us/Windows7/what-to-know-before-applying-permissions-to-a-file-or-folder

  Step 2:

  If you're still having problems, then run Check disk to repair the bad sectors.

  a. Click Start, in the start search bar type cmd, right-click on the command prompt icon in the box programs and then click Run as administrator.

  b. Type X: (for the card reader drive letter) and press enter

  c. at the command prompt, type chkdsk /f and then press ENTER.

  Now, type chkdsk/r

  Note: CHKDSK would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area. You can save the data on the disk before you perform a checkdisk.

  For more information, refer to the article below.

  Error message when you try to perform a full backup on a Windows Vista-based computer: "the application cannot be performed because of an i/o device error."

  http://support.Microsoft.com/kb/952272

  Note: This article remains valid for Windows 7 also.

  I also suggest you to check this problem with another USB plug.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Need help to install the network on laptop drivers

  I have a laptop of HP 2000-239WM and recently erased due to trying to sell. However, when I reinstalled everything back on the PC, no network drivers have been installed, so I have no access to the internet, wireless and wired. Should what programs I install via USB in order to solve this problem?

  The network adapter driver specifically requests the Ethernet, wifi and it...

  Hello McKinley,

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  According to the description, I understand that you need help to install the network drivers into the laptop.

  Certainly, I understand your concern and will try my best to help you.

  In order to install the NIC drivers in the system, I suggest to visit the link below and check if that helps.

  http://support.HP.com/us-en/drivers/selfservice/HP-2000-200-notebook-PC-series/5091493/model/5119030

  Note: Make sure you have access to the internet to another computer and download the network drivers using the USB and install on your laptop.

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.