Need Extra pair of eyes to look over the VPN config question...
I have a 515 and 3 501. I have currently 2 VPN works well. I'm having a bit of time lift the 3rd VPN. I check that the same key is used for both configs. I know I'm missing something simple here, but I can't see it...
515:
6.2 (2) version PIX
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
nameif ethernet2 security10 intf2
...
hostname YRPCI
domain xxxx.com
fixup protocol ftp 21
fixup protocol http 80
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol they 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol sip 5060
fixup protocol 2000 skinny
fixup protocol http-8080
fixup protocol ftp 22
names of
name x.x.71.8 ConstOffice
name x.x.81.11 BftOffice
MainOffice x.x.71.7 name (this is the local device)
name x.x.152.238 Savannah
allow the ip host 192.168.50.10 access list acl_outbound a
allow the ip host 192.168.50.75 access list acl_outbound a
allow the ip host 192.168.50.201 access list acl_outbound a
acl_outbound list of access allowed tcp 192.168.50.0 255.255.255.0 any eq smtp
acl_outbound list of access allowed tcp 192.168.50.0 255.255.255.0 any eq pop3
acl_outbound 192.168.50.0 ip access list allow 255.255.255.0 host 192.168.51.0
acl_outbound 192.168.50.0 ip access list allow 255.255.255.0 host 192.168.52.0
acl_outbound 192.168.50.0 ip access list allow 255.255.255.0 host 192.168.53.0
access-list acl_outbound allow the host tcp 192.168.50.11 a
acl_inbound list access permit tcp any host MainOffice eq 3389
acl_inbound list access permit icmp any any echo response
access-list acl_inbound allow icmp all once exceed
acl_inbound list all permitted access all unreachable icmp
allow the ip host MainOffice one access list acl_inbound
acl_inbound list access permit tcp any any eq ssh
acl_inbound list access permit tcp any host pop3 eq MainOffice
acl_inbound list access permit tcp any host MainOffice eq smtp
access-list 100 permit ip 192.168.50.0 255.255.255.0 192.168.51.0 255.255.255.0
access-list 100 permit ip 192.168.50.0 255.255.255.0 192.168.52.0 255.255.255.0
access-list 100 permit ip 192.168.50.0 255.255.255.0 192.168.53.0 255.255.255.0
access-list 101 permit ip 192.168.50.0 255.255.255.0 192.168.52.0 255.255.255.0
access-list 102 permit ip 192.168.50.0 255.255.255.0 192.168.51.0 255.255.255.0
access-list 103 allow ip 192.168.50.0 255.255.255.0 192.168.53.0 255.255.255.0
pager lines 24
interface ethernet0 car
Auto interface ethernet1
Automatic stop of interface ethernet2
ICMP allow any echo outdoors
ICMP allow any inaccessible outside
Outside 1500 MTU
Within 1500 MTU
intf2 MTU 1500
IP address outside pppoe setroute
IP address inside 192.168.50.1 255.255.255.0
intf2 IP address 127.0.0.1 255.255.255.255
alarm action IP verification of information
alarm action attack IP audit
don't allow no history of pdm
ARP timeout 14400
Global interface 2 (external)
NAT (inside) - 0 100 access list
NAT (inside) 2 192.168.50.0 255.255.255.0 0 0
static (inside, outside) MainOffice 3389 192.168.50.75 tcp 3389 netmask 255.255.255.255 0 0
static (inside, outside) tcp MainOffice 192.168.50.11 pop3 pop3 netmask 255.255.255.255 0 0
static (inside, outside) tcp smtp MainOffice 192.168.50.11 smtp netmask 255.255.255.255 0 0
Access-group acl_inbound in interface outside
acl_outbound access to the interface inside group
...
Permitted connection ipsec sysopt
No sysopt route dnat
Crypto ipsec transform-set esp - esp-sha-hmac RIGHT
VPN1 card crypto ipsec-isakmp 10
correspondence address 10 card crypto vpn1 102
card crypto vpn1 pfs set 10 group2
card crypto vpn1 together 10 peer ConstOffice
card crypto vpn1 10 set transform-set RIGHT
vpn1 20 ipsec-isakmp crypto map
correspondence address 20 card crypto vpn1 101
card crypto vpn1 pfs set 20 group2
20 card crypto vpn1 peer BftOffice game
card crypto vpn1 20 set transform-set RIGHT
vpn1 30 ipsec-isakmp crypto map
correspondence address 30 card crypto vpn1 103
card crypto vpn1 pfs set 30 group2
30 card crypto vpn1 peer Savannah game
card crypto vpn1 30 set transform-set RIGHT
vpn1 outside crypto map interface
ISAKMP allows outside
ISAKMP key * address ConstOffice netmask 255.255.255.255
ISAKMP key * address BftOffice netmask 255.255.255.255
ISAKMP key * address netmask 255.255.255.255 Savannah
ISAKMP identity address
part of pre authentication ISAKMP policy 10
encryption of ISAKMP policy 10
ISAKMP policy 10 sha hash
10 1 ISAKMP policy group
ISAKMP life duration strategy 10 86400
SSH 0.0.0.0 0.0.0.0 outdoors
SSH 192.168.50.0 255.255.255.0 inside
SSH timeout 20
VPDN group pppoex request dialout pppoe
VPDN group localname yearround1 pppoex
VPDN group ppp authentication pap pppoex
VPDN username yearround1 password *.
Terminal width 80
Cryptochecksum:849d6fdb066c58cf7cfe868b6109145c
: end
501: (VPN is not working)
6.2 (2) version PIX
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
Select 7RD3DIuHCed/Bft9 of encrypted password
7RD3DIuHCed/Bft9 of encrypted passwd
Savannah hostname
domain yrpci.com
fixup protocol ftp 21
fixup protocol http 80
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol they 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol sip 5060
fixup protocol 2000 skinny
names of
name x.x.152.238 Savannah
name x.x.71.7 MainOffice
acl_outbound ip 192.168.53.0 access list allow 255.255.255.0 any
acl_outbound list of allowed access host ip MainOffice 192.168.53.0 255.255.255.0
acl_inbound list access permit icmp any any echo response
access-list acl_inbound allow icmp all once exceed
acl_inbound list all permitted access all unreachable icmp
acl_inbound of the x.x.152.0 255.255.252.0 ip access list permit 192.168.50.0 255.255.255.0
access-list 101 permit ip 192.168.53.0 255.255.255.0 192.168.50.0 255.255.255.0
access-list 101 permit ip host Savannah 192.168.50.0 255.255.255.0
pager lines 24
interface ethernet0 10baset
interface ethernet1 10full
Outside 1500 MTU
Within 1500 MTU
IP address outside dhcp setroute
IP address inside 192.168.53.1 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
PDM logging 100 information
don't allow no history of pdm
ARP timeout 14400
Global 1 interface (outside)
(Inside) NAT 0-list of access 101
NAT (inside) 1 192.168.53.0 255.255.255.0 0 0
Access-group acl_inbound in interface outside
acl_outbound access to the interface inside group
allow icmp a conduit
Route outside 0.0.0.0 0.0.0.0 x.x.152.1 1
...
Permitted connection ipsec sysopt
No sysopt route dnat
Crypto ipsec transform-set esp - esp-sha-hmac RIGHT
vpn1 30 ipsec-isakmp crypto map
correspondence address 30 card crypto vpn1 101
card crypto vpn1 pfs set 30 group2
30 card crypto peer MainOffice vpn1 game
card crypto vpn1 30 set transform-set RIGHT
ISAKMP allows outside
ISAKMP key * address MainOffice netmask 255.255.255.255
ISAKMP identity address
part of pre authentication ISAKMP policy 10
encryption of ISAKMP policy 10
ISAKMP policy 10 sha hash
10 1 ISAKMP policy group
ISAKMP life duration strategy 10 86400
Telnet 192.168.53.0 255.255.255.0 inside
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 outdoors
SSH timeout 20
dhcpd address 192.168.53.55 - 192.168.53.60 inside
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd outside auto_config
dhcpd allow inside
Terminal width 80
Cryptochecksum:57589b8bf8636b0a7f8a2d5a5e582649
: end
Thanks for your help in advance guys.
Dave
I think the following should be added to the config of the 501
vpn1 outside crypto map interface
Tags: Cisco Security
Similar Questions
-
Help with button over the button (OnHover questions)
I have a sat button A button B. B button navigates to another point on timeline onmouseOut. A re acts as the B button onhover when hung on even though its only function is to go to a Web site when you click the button. How to not to do so. (it has something to do with the key a session over the B button that acts as a navigation panel.
To illustrate, I have a circle (a ring) nagiavtion menu which is hover button B animtes, which actually look like the commuter ring to the Viewer. When they mouse over button B he then times the next section of the scenario that seems to do the menu tilt back to normal. So currently it is supposed to work like this:
They hover over button B that comes alive to sign 10. On board 10 the tilted wheel now has buttons of towing. one to read a video and the other to go to the site for the link they flew over.
When a person is placed on one of the buttons the tilting animation replays and retitls the wheels before the link becomes active to click which makes navigation uptight or bugged. IWant the animation to play the 10 Panel and stay here, then they choose a button to click and only tilt back to normal when the user mouseout/mouseouthandler() the big underlying under button.
Legitly evolves from the development of the object from one display to the other. Flash is required to send the MOUSE_OUT event as soon as your mouse cursor enters a new object because it is more on the previous object. This does not mean that you however he can only prevent.
This is a pretty easy thing to manage with the code, but I need to know more about how to configure the button.
Is the circle rotating a clip or a button? If it is a button that will take more work. If you have coded a MovieClip, then it will be easier.
After that I know the answers to the above question, that the answer will result by setting just a few flags to know a condition. Once you have lost your drive in place and pop buttons on the screen, the MOUSE_OUT code will need to check that if you rode on all objects you do not want the drive to respond to the. I'll provide more code once you let me know how put you up.
-
Routing between two remote sites connected over the VPN site to site
I have a problem ping between remote sites. Now the Cryptography and no nat ACL's for different sites just to affect traffic between the remote site and main site. I tried to add roads, adding other subnets to the crypto and no. ACL Nat at the remote sites... nothing worked. Any ideas?
Main site:
192.168.100.0 - call manager / phone VLAN
192.168.1.0/24 - data VLAN
Site 1:
192.168.70.0/24 - phone VLAN
192.168.4.0/24 - data VLAN
Site 2:
192.168.80.0/24 - phone VLAN
192.168.3.0/24 - data VLAN
Main router
Expand the IP ACL5 access list
10 permit ip 192.168.1.0 0.0.0.255 192.168.70.0 0.0.0.255
20 ip 192.168.1.0 allow 0.0.0.255 192.168.4.0 0.0.0.255
30 permits ip 192.168.100.0 0.0.0.255 192.168.4.0 0.0.0.255
IP 192.168.100.0 allow 40 0.0.0.255 192.168.70.0 0.0.0.255)
50 permit ip 10.255.255.0 0.0.0.255 192.168.70.0 0.0.0.255
Expand the IP ACL6 access list
10 permit ip 192.168.1.0 0.0.0.255 192.168.80.0 0.0.0.255
20 ip 192.168.1.0 allow 0.0.0.255 192.168.3.0 0.0.0.255
30 permits ip 192.168.100.0 0.0.0.255 192.168.3.0 0.0.0.255
IP 192.168.100.0 allow 40 0.0.0.255 192.168.80.0 0.0.0.255Expand the No. - NAT IP access list
10 deny ip 192.168.2.0 0.0.0.255 192.168.70.0 0.0.0.255
20 deny ip 192.168.200.0 0.0.0.255 192.168.4.0 0.0.0.255
30 deny ip 192.168.2.0 0.0.0.255 192.168.80.0 0.0.0.255
40 deny ip 192.168.200.0 0.0.0.255 192.168.3.0 0.0.0.255
320 ip 192.168.1.0 allow 0.0.0.255 any
IP 192.168.100.0 allow 330 0.0.0.255 anySite 1:
ACL5 extended IP access list
IP 192.168.70.0 allow 0.0.0.255 192.168.1.0 0.0.0.255
ip licensing 192.168.4.0 0.0.0.255 192.168.100.0 0.0.0.255
IP 192.168.70.0 allow 0.0.0.255 192.168.100.0 0.0.0.255
ip licensing 192.168.4.0 0.0.0.255 192.168.1.0 0.0.0.255
IP 192.168.70.0 allow 0.0.0.255 10.255.255.0 0.0.0.255
No. - NAT extended IP access list
deny ip 192.168.70.0 0.0.0.255 192.168.1.0 0.0.0.255
refuse the 192.168.4.0 ip 0.0.0.255 192.168.100.0 0.0.0.255
deny ip 192.168.70.0 0.0.0.255 192.168.100.0 0.0.0.255
refuse the 192.168.4.0 ip 0.0.0.255 192.168.1.0 0.0.0.255
deny ip 192.168.70.0 0.0.0.255 10.255.255.0 0.0.0.255
IP 192.168.70.0 allow 0.0.0.255 any
ip licensing 192.168.4.0 0.0.0.255 any
Site 2:
ACL6 extended IP access list
IP 192.168.80.0 allow 0.0.0.255 192.168.1.0 0.0.0.255
ip licensing 192.168.3.0 0.0.0.255 192.168.100.0 0.0.0.255
IP 192.168.80.0 allow 0.0.0.255 192.168.100.0 0.0.0.255
ip licensing 192.168.3.0 0.0.0.255 192.168.1.0 0.0.0.255
IP 192.168.80.0 allow 0.0.0.255 10.255.255.0 0.0.0.255
No. - NAT extended IP access list
deny ip 192.168.80.0 0.0.0.255 192.168.1.0 0.0.0.255
deny ip 192.168.3.0 0.0.0.255 192.168.100.0 0.0.0.255
deny ip 192.168.80.0 0.0.0.255 192.168.100.0 0.0.0.255
deny ip 192.168.3.0 0.0.0.255 192.168.1.0 0.0.0.255
deny ip 192.168.80.0 0.0.0.255 10.255.255.0 0.0.0.255
IP 192.168.80.0 allow 0.0.0.255 any
ip licensing 192.168.3.0 0.0.0.255 anyWhat should I do for these two sites can ping each other? I looked through the forums but can't seem to find someone with a similar problem, which has received a definitive answer.
Thanks in advance!
Hi, I assume that you need site 1 and 2 to communicate with each other via the main site right? If this is the case, then you need to set add the following lines to your ACL crypto:
Main router
Expand the IP ACL5 access list
IP 192.168.80.0 allow 0.0.0.255 192.168.70.0 0.0.0.255
IP 192.168.80.0 allow 0.0.0.255 192.168.4.0 0.0.0.255
ip licensing 192.168.3.0 0.0.0.255 192.168.70.0 0.0.0.255
ip licensing 192.168.3.0 0.0.0.255 192.168.4.0 0.0.0.255
Expand the IP ACL6 access list
IP 192.168.70.0 allow 0.0.0.255 192.168.80.0 0.0.0.255
IP 192.168.70.0 allow 0.0.0.255 192.168.3.0 0.0.0.255
ip licensing 192.168.4.0 0.0.0.255 192.168.3.0 0.0.0.255
ip licensing 192.168.4.0 0.0.0.255 192.168.80.0 0.0.0.255
Make sure you add these lines before the last permit
Expand the No. - NAT IP access list
deny ip 192.168.80.0 0.0.0.255 192.168.70.0 0.0.0.255
deny ip 192.168.80.0 0.0.0.255 192.168.4.0 0.0.0.255
deny ip 192.168.3.0 0.0.0.255 192.168.70.0 0.0.0.255
deny ip 192.168.3.0 0.0.0.255 192.168.4.0 0.0.0.255
deny ip 192.168.70.0 0.0.0.255 192.168.80.0 0.0.0.255
refuse the 192.168.4.0 ip 0.0.0.255 192.168.80.0 0.0.0.255
deny ip 192.168.70.0 0.0.0.255 192.168.3.0 0.0.0.255
refuse the 192.168.4.0 ip 0.0.0.255 192.168.3.0 0.0.0.255
Site 1:
ACL5 extended IP access list
IP 192.168.70.0 allow 0.0.0.255 192.168.80.0 0.0.0.255
ip licensing 192.168.4.0 0.0.0.255 192.168.80.0 0.0.0.255
IP 192.168.70.0 allow 0.0.0.255 192.168.3.0 0.0.0.255
ip licensing 192.168.4.0 0.0.0.255 192.168.3.0 0.0.0.255
Make sure that these lines are added before the last permit
No. - NAT extended IP access list
deny ip 192.168.70.0 0.0.0.255 192.168.80.0 0.0.0.255
refuse the 192.168.4.0 ip 0.0.0.255 192.168.80.0 0.0.0.255
deny ip 192.168.70.0 0.0.0.255 192.168.3.0 0.0.0.255
refuse the 192.168.4.0 ip 0.0.0.255 192.168.3.0 0.0.0.255
Site 2:
ACL6 extended IP access list
IP 192.168.80.0 allow 0.0.0.255 192.168.70.0 0.0.0.255
ip licensing 192.168.3.0 0.0.0.255 192.168.70.0 0.0.0.255
IP 192.168.80.0 allow 0.0.0.255 192.168.4.0 0.0.0.255
ip licensing 192.168.3.0 0.0.0.255 192.168.4.0 0.0.0.255
So make sure that these lines are added before the last permit
No. - NAT extended IP access list
deny ip 192.168.80.0 0.0.0.255 192.168.70.0 0.0.0.255
deny ip 192.168.3.0 0.0.0.255 192.168.70.0 0.0.0.255
deny ip 192.168.80.0 0.0.0.255 192.168.4.0 0.0.0.255
deny ip 192.168.3.0 0.0.0.255 192.168.4.0 0.0.0.255
So you're saying good enough your routers with these definitions which will be reached via one main remote sites (sites 1 and 2).
I would like to know if this is what you need.
-
Go simple traffic over the VPN tunnel
Hi Pros,
We have a problem with the traffic through the VPN. Specific subnets is not able to reach a specific HOST in the HQ, however, the host in the HQ can reach this subent on the remote database. Interresting to traffic to the vpn are mirrored on the other. Here is the partial config of the remote vpn router.
crypto ISAKMP policy 10
BA 3des
preshared authentication
Group 2
ISAKMP crypto key mypubkey9 address 210.199x.2xx.xx
!
!
Crypto ipsec transform-set esp-3des esp-sha-hmac vpn series
!
tunel_traffic 50 ipsec-isakmp crypto map
the value of 210.199x.2xx.xx peer
Set security-association second life 1440
transform-set vpn - Set
PFS group2 Set
match address remote-int-traffic
!
!
!
!
Null0 interface
no ip unreachable
!
interface FastEthernet0/0
IP 1.1.1.3 255.255.255.248
IP virtual-reassembly
route IP cache flow
Speed 100
full-duplex
No mop enabled
!
interface FastEthernet0/1
IP 10.25.24.2 255.255.255.0
NAT outside IP
inspect the SDM_LOW over IP
IP virtual-reassembly
Speed 100
full-duplex
No mop enabled
tunel_traffic card crypto
!
IP route 0.0.0.0 0.0.0.0 10.25.24.2
IP route 1.0.10.0 255.255.255.0 210.199x.2xx.xx (public IP address of the router vpn HQ)
IP route 4.0.x.0 255.255.255.0 210.199x.2xx.xx
IP route 4.0.15.11 255.255.255.255 210.199x.2xx.xx (cannot reach this hot HQ)
IP route 10.254.0.0 255.255.255.0 210.199x.2xx.xx
IP route 10.254.254.56 255.255.255.255 210.199x.2xx.xx
!distance-int-traffic extended IP access list
permit ip host 10.254.254.56 10.1x.200.0 0.0.3.255
Licensing ip to 10.1x.200.0 0.0.3.255 host 10.254.254.56
Licensing ip to 10.1x.20.0 0.0.3.255 host 10.254.254.5
permit host ip 4.0.x.11 10.1x.200.0 0.0.3.255
permit ip 10.1x.200.0 0.0.3.255 host 4.0.x.11
!Thank you
You really set one of the following routes, and it seems wrong that it should really be directed to the jump to next to the router. It should just route through the default route if you have configured listed routes. PLS, delete them if those are all you have configured and left the default route in the configuration.
IP route 1.0.10.0 255.255.255.0 210.199x.2xx.xx (public IP address of the router vpn HQ)
IP route 4.0.x.0 255.255.255.0 210.199x.2xx.xx
IP route 4.0.15.11 255.255.255.255 210.199x.2xx.xx (cannot reach this hot HQ)
IP route 10.254.0.0 255.255.255.0 210.199x.2xx.xx
IP route 10.254.254.56 255.255.255.255 210.199x.2xx.xx
Also, if it works in a way, it is more likely an access-list or a firewall that blocks traffic in one direction.
-
Open the .txt file - need another pair of eyes
Hi folks - the attachment opens in Notepad and MS Excel as 9999 rows x 3 columns (values X, Y, Z, respectively). I tried different delimiters using "Worksheet reading File.vi" to put in all the data, but only succeeded in bringing in the first column of 9999 values. Can someone take a look at this and give me the trickto get it open using LabVIEW? I think it's something very simple, but it is a Monday, isn't it?
Thanks in advance.
Don
Make sure you select '-' code display. Otherwise, it's actually \\s which is nothing. In addition, you can simply use the constant of space as did the person above this post.
-
stack of quotations - need another pair of eyes
Oracle 11.2.0.1 SE - One, 64-bit
Oracle Linux 5.6 x 86-64
Given the following procedure and focusing on the call to dbms_scheduler
If the owner of the procedure above will connect and call dbms_scheduler directly:create or replace PROCEDURE dw.fix_job_timezone( p_jobschema_in IN VARCHAR2 default null) IS type sched_jobs_tbl_type IS TABLE OF dba_scheduler_jobs.job_name%TYPE INDEX BY binary_integer; t_sched_jobs sched_jobs_tbl_type; v_job VARCHAR2(128); BEGIN SELECT job_name bulk collect INTO t_sched_jobs FROM dba_scheduler_jobs WHERE owner = p_jobschema_in ORDER BY job_name ; FOR i IN t_sched_jobs.first .. t_sched_jobs.last LOOP v_job := '"' || p_jobschema_in || '"."'||t_sched_jobs(i) || '"'; dbms_output.put_line('Processing '||v_job); dbms_scheduler.set_attribute_null (v_job, 'START_DATE'); END LOOP; END;
However, when you call the procedure above:SQL> show user USER is "DW" SQL> exec DBMS_SCHEDULER.set_attribute_null ('"ESTEVENS"."EDS_SQLNAV_JOB1"', 'ST ART_DATE'); PL/SQL procedure successfully completed.
Maybe a problem with the quote encompassing, or lack of?SQL> exec dw.fix_job_timezone('ESTEVENS'); Processing "ESTEVENS"."EDS_SQLNAV_JOB1" BEGIN dw.fix_job_timezone('ESTEVENS'); END; * ERROR at line 1: ORA-27486: insufficient privileges ORA-06512: at "SYS.DBMS_ISCHED", line 4398 ORA-06512: at "SYS.DBMS_SCHEDULER", line 2892 ORA-06512: at "SYS.DBMS_SCHEDULER", line 3028 ORA-06512: at "DW.FIX_JOB_TIMEZONE", line 78 ORA-06512: at line 1 SQL>
Change the line key to
And we getdbms_scheduler.set_attribute_null ('v_job', 'START_DATE');
OrSQL> exec dw.fix_job_timezone('ESTEVENS'); Processing "ESTEVENS"."EDS_SQLNAV_JOB1" BEGIN dw.fix_job_timezone('ESTEVENS'); END; * ERROR at line 1: ORA-27476: "DW.V_JOB" does not exist ORA-06512: at "SYS.DBMS_ISCHED", line 4398 ORA-06512: at "SYS.DBMS_SCHEDULER", line 2892 ORA-06512: at "SYS.DBMS_SCHEDULER", line 3028 ORA-06512: at "DW.FIX_JOB_TIMEZONE", line 78 ORA-06512: at line 1
And getdbms_scheduler.set_attribute_null ('''||v_job||''', 'START_DATE');
SQL> exec dw.fix_job_timezone('ESTEVENS'); Processing "ESTEVENS"."EDS_SQLNAV_JOB1" BEGIN dw.fix_job_timezone('ESTEVENS'); END; * ERROR at line 1: ORA-27452: '||v_job||' is an invalid name for a database object. ORA-06512: at "SYS.DBMS_ISCHED", line 4398 ORA-06512: at "SYS.DBMS_SCHEDULER", line 2892 ORA-06512: at "SYS.DBMS_SCHEDULER", line 3028 ORA-06512: at "DW.FIX_JOB_TIMEZONE", line 78 ORA-06512: at line 1
dbms_scheduler.set_attribute_null ('v_job', 'START_DATE');
ERROR on line 1:And get
ORA-27476: "DW. V_JOB' does not exist
ORA-06512: at "SYS." DBMS_ISCHED', line 4398
ORA-06512: at "SYS." DBMS_SCHEDULER', line 2892
ORA-06512: at "SYS." DBMS_SCHEDULER', line 3028
ORA-06512: at "DW. FIX_JOB_TIMEZONE', line 78
ORA-06512: at line 1I’ve been chasing my tail to get the right combination of single-quotes and possibly concatenation, but it has eluded me.
Hello
EdStevens wrote:
... But in this case, the owner IS the Summoner.No matter who is the Summoner. In an AUTHID DEFINE strored procedure, privileges must be granted directly to the owner of the procedure.
And the same owner was able to make the call directly, but not in a procedure that the same owner... property.
Exactly. The owner must have had some privileges granted only via a role.
-
Need to move virtual machines and power over the other ESXi HA and issues of Configuration of power
Dears
Need to move virtual machines and power on ESXi others using the HA and Power Options
So what are the Options I need activate and deactivate:
Turn on Vsphere HA
Activate the tracking host
Admission control (disabled)
VM Machine Options
VM restart priority (medium)
Response from the host of off the power isolation
VM monitoring (people with disabilities)
Monitoring of (high) sensitivity
Heartbeat of data store (select one of cluster data warehouses taking into account my preferences) of the data store is checked
On each:
Start/stop of the virtual machine is turned off
Please indicate the required Options and on virtual machines, we are not turning on?
Just to be clear, that VMware HA will only restart the VMS if ESXi hosts fails - or surveillance of the VM is turned on which will be monitors VMs will they crash or suspend and restart the virtual machine affected.
and just to be clear, that the response of insulation parameter has nothing to do whther THAT HA will work or not - it does come into play if the ESXi host is isolated of the HA - Cluster
xMotion works only between active ESXi hosts that can communicate with the server vCenter - and if the ESXi host broke down or became isolated and vMotion may not work.
vMotion is automated with DRS that vMotion will a VM who need more resources to an ESXi host with enough reosurces.
-
Need to drag and drop video clips over the keyboard to rotate
My project is to allow visitors to the website drag furniture on a floor plan. I need all items be independent of each other with drag and drop and then be able to rotate each item with an arrow on the keyboard.
The code I have allows all drag-and - drop, but I can't get the code to rotate an element. If anyone can help, I certainly appreciate. My Action Script 3 following code:
/ * Drag and Drop
Makes the instance for the specified symbol with drag and drop furniture.
*/movieClip_1.addEventListener (MouseEvent.MOUSE_DOWN, fl_ClickToDrag);
function fl_ClickToDrag(event:MouseEvent):void
{
movieClip_1.startDrag ();
}stage.addEventListener (MouseEvent.MOUSE_UP, fl_ReleaseToDrop);
function fl_ReleaseToDrop(event:MouseEvent):void
{
movieClip_1.stopDrag ();
}/ * Drag and Drop
Makes the instance for the specified symbol with drag and drop furniture.
*/movieClip_2.addEventListener (MouseEvent.MOUSE_DOWN, fl_ClickToDrag_2);
function fl_ClickToDrag_2(event:MouseEvent):void
{
movieClip_2.startDrag ();
}stage.addEventListener (MouseEvent.MOUSE_UP, fl_ReleaseToDrop_2);
function fl_ReleaseToDrop_2(event:MouseEvent):void
{
movieClip_2.stopDrag ();
}stage.addEventListener (KeyboardEvent.KEY_DOWN, nextQuestion);
function nextQuestion(event:KeyboardEvent):void {}
trace (Event.keycode);
if(Event.keycode == Keyboard.Right)
{
movieClip_1.rotation += 5;
}
if(Event.keycode == Keyboard.Left)
{
movieClip_1.rotation-= 5;
}
}Thank you, Frankie
Create a variable to determine the last selected movieclip and allowing to target in the keyboard code. Here is a smaller version of your code that does this, where drag and drop functions are shared by objects that can be moved...
var selectedMC:MovieClip;
movieClip_1.addEventListener (MouseEvent.MOUSE_DOWN, clickToDrag);
movieClip_2.addEventListener (MouseEvent.MOUSE_DOWN, clickToDrag);
movieClip_1.addEventListener (MouseEvent.MOUSE_UP, releaseToDrop);
movieClip_2.addEventListener (MouseEvent.MOUSE_UP, releaseToDrop);function clickToDrag(event:MouseEvent):void
{
selectedMC = MovieClip (event.currentTarget);
selectedMC.startDrag ();
}function releaseToDrop(event:MouseEvent):void
{
event.currentTarget.stopDrag ();
}stage.addEventListener (KeyboardEvent.KEY_DOWN, nextQuestion);
function nextQuestion(event:KeyboardEvent):void {}
trace (Event.keycode);
if(Event.keycode == Keyboard.Right)
{
selectedMC.rotation += 5;
}
if(Event.keycode == Keyboard.Left)
{
selectedMC.rotation-= 5;
}
} -
Cannot change network over the VPN connection components
Hi all
I set up a VPN in windows XP Service Pack 3 with all latest updates. When I display the properties of the VPN connection, there is a tab labeled "Networking". When I click on the tab networking that I get an error message pop up that says: "Unable to allow the editing of networkingcomponents at the moment because they are being modified elsewhere." I restarted and also tried to search and stop the services dealing with virtual private networks, etc. nothing works.
Can someone help me troubleshoot or identify what prevents me to change my network layout tab? There is virtually no information on the internet addressing it.
Thanks in advance!
Hi Amish_Robot,
The issue of Windows XP, you have posted is better suited for the IT Pro TechNet public. Please ask your question in the TechNet forums for assistance.
Hope the helps of information.
Concerning
Joel S
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
The Windows Media Center has things where I can watch vidoes watch pictures and movies and tv watching sport and see my tasks and extra.
When I look at the title of the property, in general, the file is called: ehshell.exe
It is by Microsoft Corporation any accident about 2 months ago that just, it started showing the Windows Media Center.
Help, please!
Hello
Run this fixit:
-
cannot pair look on the phone was very good and makes everything I don't need help
my Apple Watch re - will pair not to my iPhone 5 c was fine and just went off I tried everything I know manual I tried but only to give me 5 digits and he needs 6
I've been trying since 08:00 this morning no chance need help, my watch is 7months old exploded b4 but matched ok.
Hi, Dorothy
When pairing manually, you need to tap your iPhone when it shows the name of the device (which includes a five-digit code) on your watch:
Your watch then displays a six-digit code, you will then enter on your iPhone:
More information:
-
I need a new set of eyes to look at my work, could help forum?
Hi forum members.
I started with no experience with Illustrator, Photoshop or character animator. Never heard of the puppet animation until I saw a video on You Tube. But through the magic of blind chance, I a puppet. It only took 4 months. But it does not work.
I would like the form to look at a few screenshots, and discovered by the structure and layers. IHAVE tried to produce the puppet as "Wilk". But when I imported it Ch nothing happens. No lip SNYC, no movement of the head, eyes or eyebrows.
The puppet contains only the frontal view, have four heads more to add. In addition, 9 games to hand more.
Take a look any assistance will be greatly appreciated.
Thank you
BY
Nice character!
Another look at the structure of Wilk - it seems that you have the right parts, but just the group/organize properly.
1. put your point of view within a leading group.
2. place your pieces (such as the mouth and eyes) within the groups named as Wilk.
I think once you emulate that structure a little closer, things should start to work.
-
How do I use the sony vaio VPCEC3S0E built in motion eye camera I have attached looking for the correct drivers but could not locate them
Hello
Troubleshoot camera connection
http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problemsYou probably need to recharge the device drivers and camera control software (usually included
with the drivers and installed at the same time).Login as an administrator.
Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
will update the driver stack.Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
software (if not more recent get the same).Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.
Manually look at the sites of the manufacturer for drivers.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers to 7 (update drivers manually using the methods above is preferred
to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlThen let windows updates on however prevent loading of drivers who are often older than the
those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).Stop Windows 7 to automatically install device drivers
http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/How to disable automatic driver Installation in Windows 7 / Vista
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
Ultimate and Enterprise)
http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/----------------------------------------------------------------------------
Check with the Sony Support, their online documentation and drivers (update or reinstall).
and their forums.Sony - Contacts
http://eSupport.Sony.com/us/Perl/contact-land.plSony - drivers
http://eSupport.Sony.com/Perl/select-System.plSony - Support
http://eSupport.Sony.com/Sony - Forum
https://Forum.sel.Sony.com/?XID=M:Showcase:eSupportI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
WHS backup
You just bought a new WHS 2011. Question, can I restore the backup made by WHS v1. PP3 the WHS 2011? Or do I need to copy the files over the network of old serevr again?Hello
Because the problem is with Windows Home Server, I recommend you post this question in the Forums Windows Home Server.
-
I'm at my wits end, HELP ME! I was typing an email that has been of about 200 words I hit the space bar and grabbed the next word and looked up the eyes and my email everything was gone! This happened to me several times and I can't ever find anywhere. It just disappears. Can someone help me? I want to know why he spends, how I can solve this problem how can I recover my work and where it went! I blame my laptop or windows or the manufacturer?
I wrote a full description of my problem, but of course it also disappeared. I type 2-300 words and pooofff they disappear I can't explain it better or go on any more because I just it loose once AGAIN all! I tried to explain in more detail a related problem, but of course he gone too so I send this before I lose too.original title: email disappearsThe text turns blue, because you mentioned it. The most plausible explanation to highlight all of the text while typing is due to hit CTRL-A, which is the same as Edit | Select all. Then when you type a character when this text is highlighted, then highlighted (blue) text is replaced by the character you typed. Be very careful to not press the CTRL key instead of the SHIFT key when you type a capital letter A or else which will never happen.
If your cursor jumps around then also scan your system against viruses and malware.
Steve
Maybe you are looking for
-
How can I mass delete history?
How can I mass delete history?
-
Picasa and Crayola Web Apps not available on D110a
I was wondering why the Picasa or Crayola web applications are available for the D110a. As this is a photosmart printer you'd photo apps would be first for this printer.
-
I want to reinstall XP on drive C by using the recovery CD (D leave intact)
I had Toshiba install a new hard drive with 40GBonto my 300 X 4 satellite. This was divided into drive C with 15 GB for windows and software and drive D with 25 GB of data. For some reason 'it cannot find the operating system', so I want to reinstall
-
Satellite A350 - difference between these tools of Toshiba
The hardware configuration is 1sy downloadTHWs - 20091015153810.zip This tool allows you to customize the settings of your hardware, depending on how you work with your computer and the devices you use.version 1.63.0.11 and he second download is savi