need file ksuser.dll on my pc

Similar Questions

• Missing dll file USBSTOR.sys ksuser.dll

  Dll file missing original title-

  I'm missing dll file ksuser.dll USBSTOR.sys can someone help me get it back?  I am running WIN XP Media Center 2002 SP3 and IE 8.0. I think I deleted it by accident when I uninstalled Tune Up Utilities.  Because of this missing file, I can't apply. Thank you.

  Fingers crossed X X

• where can I get the file dlbtmcro.dll

  computer said I need file dlbtmcro.dll.  Where can I get?

  This seems to be part of the package of driver scanner for a Dell all-in-one printer.

  Reinstall your Dell printer.  See A section for directions.

  Normally, you should go to Dell for pilots: http://www.dell.com/support/drivers/us/en/19/DriversHome/NeedProductSelection?fkey=Drivers_PS

  However, in the search for your file name, a website says that it was the driver for the Dell AIO 922.  If the printer you have, Dell seems to have abandoned the XP drivers for this model and has the Vista drivers.  I couldn't find drivers Dell 922 on third-party sites, such as http://dell.driversdown.com/dell-drivers-downloads/Dell-Photo-All-In-One-Printer-922_8587.shtml download drivers on these sites at your own risk.

  Can also ask in the forum of Dell printers: http://en.community.dell.com/support-forums/peripherals/f/3528.aspx

• I need help with a problem of file softdub.dll any answers or how to replace it?

  I need help with a problem of file softdub.dll all the answers, or how to replace it?  Yes, it's a problem of Vista vs itunes and apparently I lost? This file somehow.  I have no idea how blessed remedy.  I tried all the normal fixes / easy I know, but I am a novice at best.  so please, be gentle and try to guide me through a response.  Please, I beg you!

  Hello

  Did you download and save iTunes on the desktop > then right-click > select run as administrator to install?

  If you don't have anything done, see if this information helps you.

  "Not to install iTunes or QuickTime for Windows"

  http://support.Apple.com/kb/HT1926

  «Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7»

  http://support.Apple.com/kb/HT1923

  If the advice already given does not, please contact Apple for assistance.

  "iTunes support-how to use iTunes.

  http://www.Apple.com/support/iTunes/

  "Contact iTunes Support.

  http://www.Apple.com/support/iTunes/contact/

  Or ask in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

  See you soon.

• need to file dplay.dll play doom collectors edition, where I get it or what else can I do

  I have recently upgraded to windows 7 ultimate 64 bit and I try to install programs I had on my old computer. I like the misfortune I can play my doom 3 on here, but not my collectors edition. I can install it but when I go to play it it says I need a dplay.dll file there is no file in the software, it is compatible with xp, but I can not play on here what I do? where I get it. or what can I do else. Oh I also have the file defined to run in xp mode.

  Hello

  What is the full and exact error message?

  I suggest you to follow these steps and check if it works.

  a. navigate to the location C:\Windows\System32.

  b. find the file dplayx.dll.

  c. make a copy of the file and name it to dplay.dll.

  Let us know if it helps.

• screen saver does not - says he needs the following file: dsdx932.dll where I get it

  screen saver does not - says he needs the following file: dsdx932.dll where I get it

  Try the Direct X Installer Web -.

  Download details: DirectX end-user performance

  If the d3dx9_32.dll file is missing in fact the Web Installer will install a. If it is corrupt you then if you delete the file Sytem32 and SysWOW64 (with 64-bit Windows) Web Installer will install a new copy.
  The Web Installer does not overwrite existing files.
  When you do not get an error of direct x with a specific file name. You must use the
  Direct X Redistrubitable June 2010 as it will overwrite existing files of DX.

  Download details - Microsoft Download Center - DirectX Redist (June 2010)

  .

• Try installing Adobe Acrobat 8 on Windows 8. It says that I need the file AdobePDF.dll on Windows Vista CD-ROM. Where can I find this file?

  Try installing Adobe Acrobat 8 on Windows 8.  It says that I need the file AdobePDF.dll on Windows Vista CD-ROM. Where can I find this file?

  Acrobat 8 is compatible with Vista, Windows 7 or 8. She asked the AdobePDF.dll and if you can get it, the installer asks for another, then another, the... and it would not work properly. If you want a compatible version, go here...

  http://www.Adobe.com/CA/products/Acrobat.html

• I'm trying to install Acrobat 8 Std on a laptop computer that was in need of a restoration.  He asks the file AdobePDF.dll since my Vista CD - I do not have.  How can I get this file or another which will allow my Acrobat 8 work on this laptop with Win 8

  I'm trying to install Acrobat 8 Std on a laptop computer that was in need of a restoration.  He asks the file AdobePDF.dll since my Vista CD - I do not have.  How can I get this file or another which will allow my Acrobat 8 work on this laptop with Win 8.1, which she did before restoring?

  John,

  AdobePDF.dll is in the file Data1.cab. Mine is located in C:\Program Files (x 86) \Adobe\Acrobat8\Adobe Acrobat 8 Professional\ You need to extract the file "AdobePDF.dll_64" from the .cab file. You can do this with WinZip or 7-Zip. Everything you need to extract is this file, nothing else... Once you have extracted it, remove the _64, so the name of the file is AdobePDF.dll. Then place the file in any location you want and run the program it when asked. For a file location, I suggest to C:\Program Files (x 86) \Adobe\Acrobat8\

  Hope that helps.

• Receiver error message: "" Ultra driver would need UM_EMDL. "» "DLL", printer installation.

  Original title: Ultra driver would need UM_EMDL. DLL

  I have a badge printer (ID Pro) and it allows to install the printer whenever I plugged into my computer. Now, I get an error message indicating
  «"Ultra driver would need UM_EMDL."» DLL", I searched all files on my C drive and cannot locate this file.  Don't know why it is missing.

  All the advertised 'free' pilot of fixation and the registry fixing software so far has not proven to be free. Any suggestions?

  Hi LucindaGreene,

  1. What is the exact brand and model of the printer number?

  2 Windows operating system you are using?

  You can try the following steps and check if it helps:

  Method 1:

  Uninstall the printer and reinstall it again.

  Step 1:

  If you use Windows 7, to remove the printer, follow these steps.

  a. open devices and printers, click the Start button, and then click the Start menu, click devices and printers.

  b. right-click on the printer you want to remove, click remove the deviceand then click Yes.

  c. If you cannot delete the printer, right-click again, click Run as administrator, click Remove device, and then click Yes. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  If you use Windows XP, you can delete the printer from the Device Manager drivers or Add / Remove programs.

  Step 2:

  Follow this link to install the printer.

  Install a printer

  You can also visit the printer manufacturer to download and install the latest version of the printer drivers.

  For Windows Vista, refer to the article:

  Add or remove a printer

  Method 2:

  You can also try running the fix it and check if this may help:

  Printer in Windows problems

• Error trying to copy "system missing or incorrect. Need original Windows DLL WNASPI32. DLL.

  Original title: Bad or missing file

  I get an "incorrect or missing system. DLL

  Need original Windows WNASPI32. DLL

  When I want to copy something. How can I fix it

  Hello

  1. what operating system is installed on the computer?

  2 have you made any changes to the computer before the show?

   

   

  There are several different ways that wnaspi32.dll errors may appear on your computer.

  Wnaspi32.dll error messages may appear when using or installing some programs when Windows starts or shuts down, or maybe even during a Windows installation. The context of the wnaspi32.dll error is a key piece of information that will be useful while solving the problem. As such, please post the exact error message.

  Run the System File Checker command to replace the copy of the file wnaspi32.dll missing or damaged.

  Reference:

   

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7:

   

  http://support.Microsoft.com/kb/929833

   

• File CoreFoundation.dll was not found

  From the start of my PC, I get a warning that says file CoreFoundation.dll was not found. How can I reinstall this file in my PC. My system is Windows XP.

  From the start of my PC, I get a warning that says file CoreFoundation.dll was not found. How can I reinstall this file in my PC. My system is Windows XP.

  Hey Engineer747

  the apple information below support can help you "CoreFoundation.dll file is missing.

  http://support.Apple.com/kb/TS2211

  1. If iTunes is still installed, Uninstall iTunes.
  2. Download and install the latest version of iTunes.

  

  Still need help? Take the Express Lane to contact technical support

  Use Express Lane to contact an expert on Apple support for custom and practical support.
  Get started

  and vista forums, you are

  Here is a link to the forum programs xp if necessary

  http://social.answers.Microsoft.com/forums/en-us/xpprograms/threads?filter=AllTypes

  Walter, the time zone traveller

• RealPlayer does not open due to missing file MSVCP90.dll

  I try to open realplayer and every time I get the same error message: Realplayer does not open due to missing file MSVCP90.dll. I tried to uninstall and reinstall a clean version and it's the same result every time! What I am doing wrong? How can I solve this problem? I have a laptop HP 1030NR which uses xp edition sp3 family. Can anyone offer any suggestions?

  The problem is that RealPlayer needs pieces of Visual Studio/Visual C++ libraries and that is not finding them on your system.  You do not have to install all this junk - just distribution (like MSVCP90.dll) files.

  You can look in Add/Remove programs and see what Microsoft Visual C++ redistributes you have installed right now (you can have none).  I installed them in 2005.  You may have none or more installed.

  I would like to download the latest Package Microsoft Visual C++ 2010 redistributable and install it from here:

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=5555

  Reboot and see if RealPlayer is happy now.

• Error message "the file wmp.dll has a version number of 11.0.5721.5280 where 11.0.5721.5268 was expected. Windows Media Player is not installed correctly and must be reinstalled.

  Original title: I need the Windows Media Player for WinXP 32 bit.

  Recently when I tried to play an Audio CD using Media Player, I get the following message: "the file wmp.dll has a version number of 11.0.5721.5280 where 11.0.5721.5268 was expected. Windows Media Player is not installed correctly and must be reinstalled. You want to install the player from the Microsoft website? "When I clicked 'Yes', the window get Window Media Player appeared that lists the different versions of the operating system Windows however, in the category Windows XP, only the 64-bit version has been registered and I need the Windows XP 32-bit version. Anyone know where I can get the 32 bit version?

  Hi donsor,

  You did it of any material changes or software on the computer before this problem?

  You can follow this link & check if the problem persists.

  After the WMP update you an error of wmploc.dll on version number incorrect

  
  Reference: Windows Media Player is not properly installed and needs to be reinstalled

  Hope the helps of information.
  Please post back and we do know.

• Explorer Windows has stopped working. Name of the damaged file: wmp.dll

  Original title: Windows Explorer has stopped working

  There seems to be a lot of discussion on this issue.  I tired some of the patches, but some of my numbers seem different from what other people have.  The problem is on my laptop.  I try to connect to my router and have internet access.  My office is a new computer with Windows 7 installed.

  When I try to open my network center and sharing on my laptop, the computer thinks for a while, and then I get the Windows Exporer stopped working window.

  ProblemEvent name: InPageCoFire

  Error state code: c000009c

  Type of media loopholes: 00000003

  Name of the damaged file: wmp.dll

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 4105

  Additional information 1: fd00

  Add information 2: ea6f5fe8924aaa756324d57f87834160

  Add information 3: fd00

  Add information 4: ea6f5fe8924aaa756324d57f87834160

  I am at a loss!

  Thank you

  Kevin.

  Hey Kevin,

  You will need to run the command above in the elevated command prompt.

  Refer to this step help: How to run a command with elevated privileges?

  After you run the command of high fashion, you should get the message, "" DLLRegisterServer in wmp.dll managed."

  Also, you can run the method 2 regardless of the success or failure of the method 1. Please try these methods first and see how it goes.

  Normally, it is appropriate to fix this problem by running SFC scan and you would not need to copy the file.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• whenever I re - start the computer I get this error: could not load the file nta0104.dll.

  "original title: NTA0104.dll.

  whenever I re - start the computer I get this error: could not load the file nta0104.dll. How can I fix?

  HM

  Hello

  Google who provides virtually no information that suggests it might be the malicious program or a start remains for her entry search

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902