Starting point of the CSA

Similar Questions

• Starting point in the slide show screen saver

  original title: screen saver

  SLIDE SHOW

  I have a slide show for my screensaver - is there a way to keep the slideshow rotation, rather than return to his moose start point? I guess what I want is an endless looping of images in the gallery when I have time... Thank you - as you can tell, I'm not good at this

  Isn't what you want eventually return for the first starting off of too - it if turns?  Do you really mean that's not displays ALL the pictures in the Gallery, but some subset and want to include the rest of them as well?  Or you're looking for a random show type who do rotate or flip at the start point, but continues to change totally randomly?

  I'm not sure that these options are possible, but I want to make sure I understand what you want before researching it.

  Thanks and good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Starting Point question the effect

  I guess there is an obvious answer, that I can't understand.

  In short: I changed the starting point of a video clip of 10 seconds at the beginning of the clip.  When I play from scratch on the timeline WITHOUT active effect, the clip starts exactly to the point that I put.  If I activate an effect (it seems not to matter of what one is), the clip starts now at the very beginning of the clip, ignoring my point of departure edited 10 seconds.

  The 10 second point has been moved to the left of the timeline, and the workspace starts at zero.  Even when I apply something as simple as the Hue/Saturation, the same thing happens... once the effect is applied, when I click to play the clip, even if my 10 second point shows zero, the clip will now play at the beginning of the clip.

  Thanks in advance,

  Keith

  Something is happening with the temporal effects like Echo? Remapping of the time / Time-active stretching? Otherwise, the behavior might indicate that a problem with OpenGL accelerated effects processing and your card is not worth, so try and disable the OpenGL option in the preferences.

  Mylenium

• Starting point for the signal clk sample

  I am currently trying to synchronize my PXI-7344 Controller with my hardware DAQ-PXI-6221. The devices are connected through 1050 PXI/SCXI chassis.

  I wrote a program on board pending a signal RTSI and then making a capture high speed. The data is buffered in memory and then transferred to the PC in chunks.

  To synchronize this data with my DAQ data, I want to export the sample clock in the RTSI bus. My question is: the sample clock start sending signals RTSI after that I prepared and booked the task (the sampling frequency is known) or these signals do not appear before you actually begin the task?

  In the latter case, it would be much easier to merge the data because the two devices were producing the same amount of samples.

  Concerning

  André

  Hello Andrew,.

  Clock signals are not exported through the RTSI bus, until the task starts unless the trigger is configured. In this case clock signals will not be sent until the start trigger is received.

• import problem ORA-01658: unable to create the STARTING point for the segment in your

  I created the above tablespace
  
  create tablespace SAMPLEDATA
  DataFile ' / u01/app/oracle/oradata/sample/sampledata01.dbf' size 50 M autoextend on next 10 M maxsize unlimited
  logging
  Local extended management
  segment space management auto
  Flashback on;
  
  create SAMPLE user identified by usrmringnew
  SAMPLEDATA default tablespace
  tablespace temporary temp;
  
  
  Import from 9 to 10r2
  
  IMP fromuser = touser = sample indexfile=/home/oracle/import/production/export/import_productionddl_20081007.log file=/home/oracle/import/production/export/production_export_20081007.dmp log=/home/oracle/import/production/export/production_import_20081007.log production system
  
  Unfortunately, it gives the error
  
  ORA-01658: unable to create the measure INITIAL segment in tablespace
  
  could someone kindly help me on this?
  
  Thank you very much!

  Hello

  As you can see, your data file specifications need to increase of 10 M, but your file system has only 3.7 M of available, that is why the server is unable to increase the size and you get this error message.

  Solution - you can use one of following:

  1. move the data file to a point of editing with sufficient space.
  2 - Add a new data file for the tablespace and host this data on a new mount point file with sufficient space.

  Published by: sanjayIndia on October 8, 2008 09:02

• Using the coordinates entered to set the starting point of a Tween

  Hello
  
  I have a movieclip 'pano_mc' that moves around through the movement of the mouse, there is a hotspot (hs1_mc) nested within it (which moves with the Pano_mc), I have a hs1_mc event delivery, once pressed allows me to get the x and y 'pano_mc' at the point of delivery, I need a way to use these x and y corodinates to set the starting point for the interpolation , on Pano_mc.
  
  Cannot use 'this' (as shown in the link above) that the event is on the hs1_mc and if I just use '_x' interpolation setting, it begins where the film is originally and not where it is when the delivery is executed, where I get the cordinates right here.
  
  
  var hotSpotTweenX:Tween = new Tween (pano_mc, "_x", mx.transitions.easing.Elastic.easeOut, 0, "400", 3, true);
  
  Is there a way to fill '_x' with the var newx:Number = stagePosition.x; who holds the accurate cordinate of the pano_mc at the time of the press...
  
  I need to be able to use the coordinates xy of the pano_mc captured by the delivery, to set the starting point of the interpolation which then tweens the movie at a predefined point... create an interpolation of seemless...
  
  
  Can anyone shed some light on this... Thanks in advance

  "_x" isn't the starting value. This is the property you're interpolation. your ' 0 'is the starting value and your '400' (which really shouldn't be in quotes) is the value of end to resolve your problem, use a variable instead of ' 0'.

• How can I set the time axis on my waveform table to show run time that is to say whenever I start the program I should have 0 as the starting point

  How can I set the time axis on my waveform table to show run time that is to say whenever I start the program I should have 0 as the starting point. I've been messing around with the without success. I'm under Labview 2012.

  Thank you!

  Townes wrote:

  I can't understand what you mean. I have no formal training with labview. It took me a long time to write the simple program that I joined. Any guidance would be greatly appreciated!

  Its pretty normal for a beginner to take the time to write code. Right-click the map of waveform > Create > property node > historical data, you will get a property node, keep this at the beginning of the code and create a constant. You can also go to the VI properties and > run and select "clear indicators when it is called.

  I recommend you to go through the basic materials of LabVIEW which will give you an understanding on the basics of bases/components of LabVIEW.

• White screen at the Vista start up... only the mouse pointer, loading the driver freezes on crcdisk.sys loading, sfc/scannow does not work...

  Hello
  I don't know if this is the right place for this post... Sorry if it's not! I had looked online if anyone has the same problem to me, I found similar problems, but not the mine one (but if there is, can you please give me the link?).
  I have a DELL LATITUDE D830's with a dual boot (Ubuntu and Vista). When I run Vista I get the Windows logo and then a black screen with only the mouse pointer.
  Keyboard does not work. I can move the mouse, but can not select anything. No work of Ctr + Alt + Delete.
  I can just turn off the computer. At first I need to press F8 to choose something otherwise I get the black screen.
  If I reboot requesting the automatic restoration of the PC that he asks me the account and work only account is mine a (no administrator available). He then suggested to contact the administrator. I checked the error report and nothing is reported: the system works.
  I have no previous configuration to restore.
  I can access the command prompt. So I tried to write sfc/scannow. The answer is that to complete the process requires to restart the computer and make again sfc/scannow. I restart again, the new order, but I get the same answer...
  When I get the black screen, CPU is not disabled, because after a long time (about 2 hours) the computer restarts itself... If something happens even if I don't know what!

  The only thing I have not tried is to restore Vista from CD... I'm really afraid that this could remove the partition, or crash at startup I have, by removing access to Linux!

  I have a backup of all my files, so no matter if what I have to do to cancel my files, but what I really need is to keep Linux operating.

  So, if you have any suggestions... I'm not good at using the computer, so, please, a solution step by step be really appreciate it!
  Thank you very much

  Paola

  PS No peripherics are connected, the wireless is disabled

  Hi seymar,.

  I suggest that you run a tool to restart system on the computer and check if it works.

  If you have a Windows Vista installation disc, you need to restart (boot) your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.

  1. Insert the installation disc.
  2. restart your computer.
  Click the Start button, click the arrow next to the lock button, and then click restart.
  3. If you are prompted, Press any key to start Windows from the installation disc.
  Note If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change the BIOS settingsfor your computer. For more information, see BIOS: frequently asked questions. 4. choose your language settings, and then click Next.
  5. click on repair your computer.
  6. Select the operating system you want to repair, and then click Next.
  7. in the System Recovery Options menu, click Startup Repair.
   
  Check out the link for more information below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

  If the previous step fails then I suggest that you run CHKDSK on the computer to check if there are any errors on the hard drive.
  1. Insert the installation disc.
  2. restart your computer.
  Click the Start button, click the arrow next to the lock button, and then click restart.
  3. If you are prompted, Press any key to start Windows from the installation disc.
  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change the BIOS settingsfor your computer. For more information, see BIOS: frequently asked questions.
  4. choose your language settings, and then click Next.
  5. click on repair your computer.
  6. Select the operating system you want to repair, and then click Next.
  7. in the System Recovery Options menu, click on the command prompt and type chkdsk command-line /f and wait until the scan is complete and later to restart the computer and check what is happening.

  For more information please visit the link below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/make-system-repairs-from-the-Windows-recovery-environment-from-Windows-Vista-inside-out Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• A villain. How can I change the icon of my screen of my application GUI of an alternative starting point

  Hello

  So I have 1 app, 2 starting points. 1 point is running in the background at start-up of the device and not including any icon or gui this point listening to BlackBerry push notifications. Point 2 is on the side of my application GUI and does not run in this case. Now the point 1 receives a push message and wants to update the icon of my application to the point 2.

  Point 1 does not have an icon so net.rim.blackberry.api.homescreen.HomeScreen.setNewState (true) will not work!

  Point 1 must somehow point 2 and updated updated icon who.

  How then?

  http://www.BlackBerry.com/developers/docs/7.0.0api/NET/RIM/BlackBerry/API/homescreen/homescreen.html... int) should work, with the index of your app gui most time that some experiences helps here.

• Pencil tool not snapping at the starting point.

  Hello!

  I have worked with the pencil for a while now and it starts a bit to annoy me that it won't be a link to its starting point anymore.

  He used to have the same effects as the right pen tool? When you want to bind the endpoint to the starting point, it should be a circle.

  Is there someone who could help me, or just pencil tool does not work like that?

  Double-click the pencil tool, there is an option to close paths

• How to set the starting point of a variable width profile anchor point?

  Hello

  I have a square with a dotted on her. I can't be a variable race, so I loaded 'Width profile 2' in the profiles. The problem I'm having, is that Illustrator uses by default to start the biggest points in the lower right corner, and I would like the "starting point" to be in the middle of the line, if you know what I mean. I'm always happy for the dotted lines start big, then gradually decrease in size, but I want to control where is the "beginning".

  I have attached pictures to show what I'm working with.

  Thanks in advance!

  Morgane.

  

  

  

  Genius! You reminded me of a quote from Khalil Gibran.

  What is obvious is that who has never seen until that someone expresses it all simply.

  Thank you.

• How can I change the starting point of a path?

  It bothers me when I use brushes for a path shape/access line. Is there a function to change the starting point of race in the direction of the form/reverse of a path?

  You won't need to duplicate the path. Just select it and then change the options for this object. There is a button in the Panel forms for this.

• Get the name of the Watched folder file starting point

  I have a folder of control as a starting point and I can use the

  %F and %E symbols in order to save the output in the result file documents.

  It's easy.

  What I can't do, is done in a string of the same file name variable in order to to use in the process:

  Is this possible?

  I would like to use this file name to discriminate against activities that the file have to do...

  Thanks as usual!

  You can add a setValue and use the getDocAttribute method to get some attributes on the document variable that contains the file that has been abandoned.

  For example:

  /process_data/@tmpString = getDocAttribute (/process_data/ @docXML, "basename")

  Jasmine

• Start Windows vista, nothing on the screen, only the pointer of the mouse

  I have a gateway desktop vista, nothing on the screen, only the pointer of the mouse
  I used the recovery tools nothing fixs

  Hello

  "I used the recovery tools nothing fixs.

  It helps us if you tell us what they were.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If necessary, here's how to reinstall back to new condition.

  "Gateway Recovery Center in Windows Vista® '

  http://support.gateway.com/s/software/MICROSOF/Vista/7515418/7515418asi.shtml

  Read these options to the gateway address:

  Gateway System Recovery from the hard - the following are methods to recover or repair the computer using the recovery of hard drive partition.

  • Complete recovery plant
  • Restoration with automatic data backup
  • Windows recovery environment

  See you soon.

• video reset to start the point - after the page transition

  I'm looking for a way to make sure a flash video reset at startup after a page transition. For the moment that the video starts just to the place, it ended after the initial page is displayed. I found some info in the FAQ that enabkes reset components but not for Flash Video elements.

  Anyone know how?

  Did the video come from? I suspect, it has been imported into SWF using Flash Professional. This is the original file, you need to bring in Flash Catalyst.

  Chris