Using the coordinates entered to set the starting point of a Tween
HelloI have a movieclip 'pano_mc' that moves around through the movement of the mouse, there is a hotspot (hs1_mc) nested within it (which moves with the Pano_mc), I have a hs1_mc event delivery, once pressed allows me to get the x and y 'pano_mc' at the point of delivery, I need a way to use these x and y corodinates to set the starting point for the interpolation , on Pano_mc.
Cannot use 'this' (as shown in the link above) that the event is on the hs1_mc and if I just use '_x' interpolation setting, it begins where the film is originally and not where it is when the delivery is executed, where I get the cordinates right here.
var hotSpotTweenX:Tween = new Tween (pano_mc, "_x", mx.transitions.easing.Elastic.easeOut, 0, "400", 3, true);
Is there a way to fill '_x' with the var newx:Number = stagePosition.x; who holds the accurate cordinate of the pano_mc at the time of the press...
I need to be able to use the coordinates xy of the pano_mc captured by the delivery, to set the starting point of the interpolation which then tweens the movie at a predefined point... create an interpolation of seemless...
Can anyone shed some light on this... Thanks in advance
"_x" isn't the starting value. This is the property you're interpolation. your ' 0 'is the starting value and your '400' (which really shouldn't be in quotes) is the value of end to resolve your problem, use a variable instead of ' 0'.
Tags: Adobe Animate
Similar Questions
-
Search for files by using the Start button
I've lost the ability to search for files by using the Start button. I can enter a file name, but always get a response "nothing found". I know I did something back a couple of weeks, but don't know what I did to turn it off. Help!
Thank you!Take a look at my search installation tips. If you are in these settings, you can make sure search is enabled and if necessary you can use the 'reconstruction' of the for button to rebuild your search system.
http://Skeene.NET/tech/boost-Windows-search-in-two-steps/
Also, there is an automated troubleshooting tool that tries to find and fix any problems with your search system. You can go for it here:
-
How can I set the time axis on my waveform table to show run time that is to say whenever I start the program I should have 0 as the starting point. I've been messing around with the without success. I'm under Labview 2012.
Thank you!
Townes wrote:
I can't understand what you mean. I have no formal training with labview. It took me a long time to write the simple program that I joined. Any guidance would be greatly appreciated!
Its pretty normal for a beginner to take the time to write code. Right-click the map of waveform > Create > property node > historical data, you will get a property node, keep this at the beginning of the code and create a constant. You can also go to the VI properties and > run and select "clear indicators when it is called.
I recommend you to go through the basic materials of LabVIEW which will give you an understanding on the basics of bases/components of LabVIEW.
-
How can I access my music folder by using the start menu. I'm used to be able to do.
When I turned on my computer this morning, I wanted to go to my music folder that I normally have access using the 'start' button in the lower left corner of the screen. Normally, I get instant access. Today, I get a message that needs to close Internet Explorer. I am currently using Firefox as my browser, just to try out it. I use Windows XP Home Edition.
When I turned on my computer this morning, I wanted to go to my music folder that I normally have access using the 'start' button in the lower left corner of the screen. Normally, I get instant access. Today, I get a message that needs to close Internet Explorer. I am currently using Firefox as my browser, just to try out it. I use Windows XP Home Edition.
==================================
If you go to... My Documents, then my music
It works no better? -
Original title: search Windows 4
With Windows Search 4, the program active at the log on before you can use the start menu. Several search screens occur and reproduce when they are closed. Sometimes it's impossible to open an Office, research childcare opening application.
Hi Ken_978,
· How long have you been faced with this problem?
· Did you do changes on the computer before the show?
· The question is only limited to Office applications?
· What exactly happens when you try to open an Office application? You receive an error message?
Follow the suggestions below for a possible solution:
Method 1: I suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malware
The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.
Method 2: If this does not help then you can uninstall and reinstall Windows search 4.0 on the computer.
Follow the steps below to uninstall:
a. click on Start
b. click Control Panel
c. select Add / Remove Program
d. place a check on "Show updates"
e. you will see Windows Desktop Search 4.0 and uninstall it.
Reinstall back, you can see the link below:
http://www.Microsoft.com/Windows/products/winfamily/desktopsearch/choose/windowssearch4.mspx
Hope this information helps.
-
Computer froze cannot open any programs or even to use the Start button to turn off.
Original title: the computer froze.
Original title: my computer (Windows XP) has frozen. -Big problem -)
Hello
Last night, I used my computer to open a load of bunch of programs of MS Access (probably asked to run a marathon when he can only walk!)
Now, I can't open any programs or even to use the Start button to turn off. How can I fix this problem or you have lost everything :-(
Thank you
Thanks - all of a sudden he started working again! Maybe this was a vacation - but I tried F8 and safe option is not come to the top.
Very old computer - but it is useful to use to return to historical documents that I don't want on my new computer.
Tnanks for the long and dedicated response :-)
-
How to set the starting point of a variable width profile anchor point?
Hello
I have a square with a dotted on her. I can't be a variable race, so I loaded 'Width profile 2' in the profiles. The problem I'm having, is that Illustrator uses by default to start the biggest points in the lower right corner, and I would like the "starting point" to be in the middle of the line, if you know what I mean. I'm always happy for the dotted lines start big, then gradually decrease in size, but I want to control where is the "beginning".
I have attached pictures to show what I'm working with.
Thanks in advance!
Morgane.
Genius! You reminded me of a quote from Khalil Gibran.
What is obvious is that who has never seen until that someone expresses it all simply.
Thank you.
-
Pencil tool not snapping at the starting point.
Hello!
I have worked with the pencil for a while now and it starts a bit to annoy me that it won't be a link to its starting point anymore.
He used to have the same effects as the right pen tool? When you want to bind the endpoint to the starting point, it should be a circle.
Is there someone who could help me, or just pencil tool does not work like that?
Double-click the pencil tool, there is an option to close paths
-
How can I change the starting point of a path?
It bothers me when I use brushes for a path shape/access line. Is there a function to change the starting point of race in the direction of the form/reverse of a path?
You won't need to duplicate the path. Just select it and then change the options for this object. There is a button in the Panel forms for this.
-
How to use the same point of view as read only in the ADF and editable
Hello
How to use the same point of view as read only in the ADF and editable? How can we succeed in TF?
-James
Hello
Steven Davelaar wrote a presentation on this 'building highly reusable Taskflows.
From slide 14, that's where your use case comes into play
Frank
-
CS4 crash when using the Vanishing Point
I use Adobe Photoshop CS4 classroom in a book. Whenever I use the Vanishing Point filter, the program crashes.
Try disabling one of the Aero themes you use. Switch to a Windows 7 Basic theme.
-
The desktop icons to stop after I leave internet. Can use the start menu
After reboot, all the features of the icon on the desktop. Inbound and outbound to the internet, I get no response. The start menu, takes me on the desktop and everything works from here
Hello
Did you the latest changes on the computer before this problem?
Method 1:
I suggest to start the computer in Mode safe mode with network and check if the problem occurs. If the problem does not occur in Mode safe mode with networking and then you try to perform the clean boot to find what startup item or service is causing the problem.
Step 1: To restart in Mode safe mode with networking enabled:
(a) reboot your computer.
(b) when you see the logo of the manufacturer of the computer, press on and hold the F8 key.
(c) on the screen Advanced Startup Options , use the arrow keys to Select Safe Mode with networkand press enter.
account d) log your computer with a user who has of administrator rights.Reference: http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
If the problem does not occur in safe mode with network you try to perform the clean boot.
Step 2: Perform the clean boot.
By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.
Method 2:
If the problem persists, try the procedure described and check if that helps.
Step 1: Rebuild the icon Cache
a. open the Folder Options to select (round), display the hidden files and folders.
b. open a Windows Explorer window.
c. go to C:\Users\(User Name) \AppData\Local
d. right-click on IconCache.db and click Remove.
e. click Yes to confirm the deletion.
NOTE: This removes the file to the trash. It is safe to empty the trash when you are done.
f. close the window.
g. empty the Recycle Bin.
h. restart the computer.
i. When you come back, you will notice the size of the file IconCache.db is reduced, and the update is now the current date.
NOTE: If for some reason any IconCache.db isn't there or the size has not changed much, then just restart the computer again. You may need to restart a few times in some cases.
j. the icon cache has been rebuilt.
k. open Folder Options for select (round) show not the hidden files and folders.Step 2: Reset the icon Cachea. right click on an empty area of the Office and click on Personalize.
b. click the link display properties.
c. under colors, select medium (16 bit) and click apply.
NOTE: If you already have a medium (16 bit) selected, then select the highest (32-bit) instead. Sometimes, you will have to do a reboot first, then go to step 4. Try both ways.
d. click on Yes to confirm the new setting.
e. now, Select the highest (32 bit) and click OK.NOTE: If you already have the highest (32 bit) selected, then select medium (16 bit).
f. click on Yes to confirm the new setting.Check Event Viewer for all related logs that could help us solve the problem.
What are the information contained in the logs of the event (Event Viewer)?
http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-ViewerHope this information is useful.
-
I'm really tired of my office when I hung up, I have windows 7, plenty of ram, plenty of space, I do regular maintenance, but this is really starting to annoy me. I am not a novice, I used since before computers that windows was invented, and I am very appreciative of the responses that will prevent this.
Hello
Crashes Windows or freezes<- try="" these="" first="" and="" the="" methods="" do="" apply="" to="" your="">->
http://support.Microsoft.com/kb/2681286#method22Performance and Maintenance<- check="" these="" especially="" the="">->
http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-7&V2H=win7tab1&V3H=winvistatab1Other methods of troubleshooting to use according to your needs:
Use the startup clean and other methods to try to determine the cause of and/or
eliminate problems.---------------------------------------------------------------
References to Vista also apply to Windows 7.
What antivirus/antispyware/security products do you have on the machine? Include
everything you've ALWAYS had on this machine, including those you have uninstalled (they
remains of leave behind which can cause strange problems).----------------------------------------------------
Follow these steps:
Try these to erase corruption and missing/damaged file system repair or replacement.
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows
Vista or Windows 7
http://support.Microsoft.com/kb/929135Use advanced tools to solve performance problems in Windows 7
http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/Problems with the overall speed of the system and performance
http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1Optimize Windows 7 for better performance
http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performanceOpen the troubleshooter of Peformance
http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-TroubleshooterTo see everything that is in charge of startup - wait a few minutes without doing anything-
then right click on taskbar - task manager - take a look at stored by -
Process - Services - this is a quick reference (if you have a little box on)
Lower left - show for all users, then check that).How to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.htmlIs a quick check to see who are loading method 2 - using MSCONFIG
then after a list of these here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out what files, registry keys, and other objects
processes have open, which DLLs they have loaded and more. This unique
powerful utility will show you even owned by each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically
When your system boots and you connect. Autoruns also shows you the complete list
locations of registry and files where applications can configure start automatic settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor file system, registry, process, thread and DLL
activity in real time.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspxWhatsInStartUP - free - this utility displays the list of all applications that are
loaded automatically when Windows starts. For each application, what follows
the information is displayed: Type of startup (registry/Startup folder), Command - Line
Channel file, the product name, Version, company name, location in the registry or
file system and more. It allows you to easily disable or remove unwanted programs
that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe
not. The window Watcher says it all, every window created by each execution of the statement
program, if the window is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.asp
Many excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Think about it an absolute must - manually update your drivers.
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded
on your system. For each driver in the list, additional useful information is
Poster: load address of the driver, description, version, product name,.
company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit Maker as replacements and system manufacturer of device which are
the most recent. Control Panel - write - graphics card - device manager
the brand and complete model of your video card - double click - tab of the driver-
Note the version information. Now click on UPdate Driver (this can do nothing
MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
If there are 3rd party with their own software and drivers and the other main device drivers
you have.Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
their latest versions. (Look for the system to update the BIOS, Chipset and software updates
Site of the manufacturer here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
REBOOT after each installation.Always check in the Device Manager - drivers tab to be sure the version you are
installation actually appears. This is because that some rollback of drivers before the
later is installed (particularly that audio drivers) so install a driver - reboot.
Make sure that it is installed and repeat if necessary.Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
SCANNER - check manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using
the above methods is preferable to ensure the latest drivers from the manufacturer of system
and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlIf you update the drivers manually, then it's a good idea to disable driver facilities
in the updates of Windows, which leaves on Windows updates, but it will not be installed
pilots who are generally older and cause problems. If updates provides a new
driver then hide it (right click on it) and then go get new ones manually if
you want.Stop Windows 7 to automatically install device drivers
http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/How to disable automatic driver Installation in Windows 7 / Vista
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for the)
Professional, comprehensive and Enterprise edition)
http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/===========================================
Refer to these discussions because many more excellent advice however remember to check
your antivirus, the main drivers and BIOS update programs and also to solve problems
with the first method cleanboot.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Windows used to wake from sleep with the return key or the mouse, now needs to press the Start button on the desktop every time. I have not changed anything.
that's happened? can anyone help?
Please click the Start button, type security in the search field and then click on "check the status of security" in the list.
What do you see? make a screenshot of it + post here.
For example, I have Microsoft Security Essentials and I see:
What do you see when you click on "View installed antispyware programs? Make a screenshot + post.
For example, I see:
How to include a screenshot, see: http://answers.microsoft.com/en-us/windows/wiki/windows_other-windows_programs/how-to-include-a-screenshot-in-your-post/2594b08e-32a3-476a-85a6-b021181be7e4
What is the exact name of your Bullguard product?
Please try to be as specific as possible in your answers, right? :-)
-
For some reason, when I try to click on the Start button, it disappears. I tried all day to dissable addons that sort, but it ended up doing another way. I have restarted computor, but the Start button, always goes away until I can click on it. Everyone comes through this before please?
Hello BeverleyMacKenzie,
Thank you for the question!
I'm sorry to know that have problems you with start button. As I understand it, you cannot use the button start effectively.
Method 1: perform the scan SFC (System File Checker) and see if the problem occurs.
Method 2: use the Microsoft Safety Scanner in full scan mode and to remove all the threats that is not detected by it and see if the problem persists.
Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection.
Answer to us if you have problems with start button or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.
Good day!
Hope this information helps.
Maybe you are looking for
-
after update to adobe flash player for 13.0.0.182 version any live stream on youtube channels suddenly stopped working. other youtube videos play fine. I tried to uninstall and reinstalled flash drive 3 times of any new version in the cache of the fl
-
Face recognition software is not working properly
Hello & help Just bought my wife the Tosh Satellite C660D. She wants to use facial recognition software, but the stupid camera will not recognize her beautiful face, it will also not recognize my ugly face.Any ideas or comments would be appreciated.
-
Satellite L350-171 dead after 2 weeks
Hi all I bought a Satellite L350-171 2 weeks of Tesco Direct. Went to the Toshiba brand because of rumors of reliability. A few days before, the computer could not turn on. Tried unplugging the charger/etc, but no joy. Called Support technique of Tos
-
I need to uninstall Microsoft Silverlight, because it does not work and then reinstall it. I need help with this.
-
SQL Server 2005 Service Pack 4 download but does not install.
Have tried several times to install the update, but it does not update. Don't know how to force an update.