When the printer prints white sheets of paper with HP monofunctional and multifunction printers

Similar Questions

• Why my printer ejects white sheets of paper?

  Hello

  I see many cases where printers are shot on white sheets of paper after trying to print a document.

  Now in general what it means the USB cord is bad or the ink cartridges are empty/bad.

  Step 1:

  I suggest to check the level of ink in the printer, because usually when you're out of ink, which causes the printer does not print at all or eject blank pages when you try to print anything from the Office for / laptop.

  You can check the ink levels by:

  I hope it's useful!

  Thank you!

• Vista and Color Laserjet 5 M reprints all when the printer is turned on?

  Vist and Color Laserjet 5 M reprints all when the printer is turned on?

  It is a new one on me. I installed the printer with a barrette SIMM Postscript so it would work even at all under Vista and now it prints well but insists on the fact that I have all re - print he has never seen a reason any whenever I turn the printer to print something again.

  XP he has never done that, but I've always had the document cannot print the error that I ignored as he did print correctly.

  Google has not really revealed anything?

  ?? Type response level 1 I was looking for... These printers are a full restart, test of memory and when it is off.

  But I think I solved it, spent some time on google and there was a suggestion on the spooler in vista, was something like clear keep printed documents or print spooling first, I went also to start printing after the last page. Who took care of a lot of it somehow. Not sure why the generic installation program would need to be changed here. Possible I did for me somehow when I was trying to get the thing to work with the PCL driver too.

  Then I noticed that whenever I turned on the printer it is printing a page of demo postscript, for some reason any, it is enabled by default in the SIMM option. Turn power off and now its not wasting so much paper now.

  So two things to look for in the computer and the printer.

• I lose my Internet on my XP computer when the printer is connected to wireless.

  My new hp6510 wireless printer works fine but my internet connection is lost when the printer is connected to wireless. I use the printer with a linksys E3000 router. The network has a XP computer, a computer with win7 64-bit. I don't have a problem with the computer to win 7, but the xp computer will drop the internet connection and sometimes I can make it work by repair of the connection to the router, but sometimes I need to restart the computer. If I stop the wireless connection and use the USB it works OK. I tried to get help from HP and Linksysm but no help. I would like suggestions.

  Hello

  Please, try the next workaroud and let me know any changes:

  1. In the computer, click the HP Photosmart 6510 .
  2. In the printer Preferences, click the estimated ink levels.
  3. Click on the tab Advanced settings .
  4. Under view alerts, select the 2nd option - Show alerts ink when I print to me.
  5. Click on close, restart the PC and follow for any change.

  Please let me know any progress,

  Shlomi

• Wireless connection works only when the printer is turned off

  my desktop computer requires an adapter wireless for internet connection.  installation of this card was problematic and I discovered I mean it was because of my printer - a kodak esp 6150 desktop, which can work wireless.    I can only connect wirelessly when the printer is off on this computer.  However, two other laptops that do not need a separate wireless adapter are able to connect wireless when the printer is on.  any suggestions?   Thank you.

  Hi Moscotty,

  You can read the following article and check if it helps.

  Windows wireless and wired network connection problems

• When I print I get several pages with a feel a little on all the pages I want to print

  When I print, I get several pages with what I print with a few lines on each page until what I printed is finished.

  mamorse,

  Thanks for the additional info. Lets try to download and execute printing and scanning doctor found here. It may fix a lot on its own, but otherwise it will give us a better idea of what is happening. The weakness of the signal is not likely the culprit (because he worked for a long time) but we can try to change that if other steps fail.

• Do the "keys" on each side of the Envy4500 lights when the printer is turned on?

  I just bought two new Envy4500s and at the same time on them, the "key (i.e. up/down, 'ok', etc.) on each side of the display screen does not light up when the printer is turned on."  HP rep said they should, but on any machine they light up. Thus, all "keys" are essentially impossible to see. Any help would be greatly appreciated. Thank you!

  Hello @paularose,

  Thanks for posting in the Forum from HP Support.

  I see that you are curious about the screen of the HP ENVY 4500 e-all-in-one printer.  I would like to help.

  The arrow keys do not light up when the printer is on, but as you can see when you look at your own models, they are clearly identified.

  I hope this helps.

  Kind regards

• continue the print job after adding paper

  Cannot find directions for: If the printer is out of paper in the middle of printing, how to make so that it can continue the work after paper is added?  I always end up having to cancel, and then restart.  Impossible to find a button back.

  The product that you have is a printer. I suggest you post in the forum for HP Business Support for a better chance to find a solution.

  You will find the Board Commercial Laserjet here.
  http://h30499.www3.HP.com/T5/printers-LaserJet/BD-p/BSC-413

• Error message when the printer - new message, old printer connection

  Hey, Dell forums. Me am a little a problem and, well, I have no idea how to solve this problem. I hope someone can help me.

  Technical care first of all: the computer in question is an IBM Thinkpad R51 laptop running Windows XP Professional SP 3. The printer is a Dell all-in - One 926. They were also well used together for a long time and never had a problem until now.

  A month ago, we bought an ereader. When I plugged it in, I got an error message. I thought, until I plugged in again and received the same message. I was going to just deal - until I tried to use my printer and got the exact same error message. At this time, I restored my computer to until I installed the ereader. I plugged the printer back in once it has been done and does not see a problem, so I thought it was fixed.

  Today, I reconnected my printer. I had some problems with it - he was constantly printing quality rough and then kept insisting there were bands on the cartridge, but I have not tried to print something with her since then plug it in to check the error message - and I wanted to see if she would print. As soon as it is plugged in, the error message there. He is come twice, in quick succession - I hit Cancel and other pops up immediately and I hit Cancel again, that the first time through this message and the ereader has shown me that it was the only way to stop.

  It comes in I got the error message: Application popup: Windows - disc no.: Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6bf7c

  Scanned, printed and another image scanned into the computer very well after that. I can't restore before you reinstall the ereader - this point was erased by the computer, creating automatic points. Whatever it is, it seems does not solve the problem. It was the same usb port that I always use to plug in the printer, and I did the same as I always have. The only things I've done since the restoration has been updated Windows and things like Java and Flash.

  Someone has advice on how to solve this error message so I do not understand whenever I use my printer?

  Phenyx,

  You can copy a document under the glass? No computer is needed to do this correct?

  I would try reinstalling the printer by following the instructions below.

  First run, delete print jobs to eliminate any print job stuck in the queue.

  Unplug the printer.

  Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

  Restart your computer. Make sure that the printer is deleted. Driver Manual printer removal

  Download the 32-bit drivers for Vista for Windows 7 32-bit or 64-bit drivers for Windows 7 64 bit Vista. Install the Vista drivers in Vista compatibility mode, you will get a message, the printer is not connected. Connect the printer at the moment (power on).

  You will find links to the patch/drivers to...

  Reference Dell 926 Photo all-in-One Printer owners thread (W7)

  Don't forget the programs anti-virus and firewall will block communications.

  Rick

• "Failed to create the object print Lexmark X 5400 Series. The printer driver is not compatible with a policy on your computer

  I have Lexmark X 5410 printer with the installation CD. Installed perfectly on computer with Windows Vista 32 bit. Try to install on Vista 64 bit computer but get error message "unable to create the object print Lexmark X 5400 Series. The printer driver is not compatible with a policy on your computer that blocks NT 4.0 drivers (1930). Tried using the compatibility in the computer. Without success. How can I fix?

  Original title:

  32-bit and 64-bit Windows: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/32-bit-and-64-bit-Windows-frequently-asked-questions

  Excerpt:
  Can I run a 32-bit program on a 64-bit computer?

  Most programs designed for 32-bit version of Windows works on the version 64-bit windows. The notable exceptions are many antivirus programs.

  Device drivers designed for 32-bit versions of Windows do not work on computers running a 64-bit windows. If you try to install a printer or other device that only has 32-bit drivers available, it won't work correctly on a 64-bit version of Windows. If you don't know if there is a 64-bit driver available for your device, go online to theVista Compatibility Center"" href = "http://go.microsoft.com/fwlink/?linkid=142444" > Windows Vista Compatibility Center

  .
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• What happens when the photo of system library is on an external drive and then the system creates a library of Photos? How do merge you them?

  What happens when the photo of system library is on an external drive and then the system creates a library of Photos? How do merge you them?

  Your library system can be on an external drive, if the drive is Mac OS extended (journaled) format and mounted on-site.

  But you must be careful, your external drive is always connected and available before the Photos and to import new photos.

  If Photos opens a different library, news, you can switch to the library on your external drive by double clicking on an external library. You can have several libraries, no problem.

  But pictures don't have any tools to merge libraries. You can switch between libraries, then open them alternately.  To merge two libraries export the photos of the smallest library and import the photos exported in the largest library.

  Or use third-party "PowerPhotos" to move photos between libraries.  But the merger is not supported in the free trial version. You must purchase the full version. You can download it here: Fat Cat Software

• I have the creative cloud installed on my computer with Photoshop, Illustrator and InDesign for when I used my free trials. I now have a job that allows me to have on my computer for free, however, I have a problem switching to work one

  I have the creative cloud installed on my computer with Photoshop, Illustrator and InDesign for when I used my free trials. I now have a job that allows me to have on my computer for free, however, I have a problem switching on behalf of employment. I've switched to creative cloud and now it of installation and update but due to lack of care and allow me to do something else. Help, please.

  log out and then back to your client application using the adobe for your subscription in cc id: http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

• Since the update of my pc based system with 10 windows and install the last Prime Minister CC when I drag a clip on the timeline audio does not come with it. I can hear audio playback in the preview window of small file so the audio is there, but it's not

  Since the update of my pc based system with 10 windows and install the last Prime Minister CC when I drag a clip on the timeline audio does not come with it. I can hear audio playback in the preview window of small file so the audio is there, but it does not appear or play on the timeline. I can drag an audio file of Ms on the timeline, but I need audio from my original file to synchronize my audio file recorded independently - used to be no problem... any ideas what I can not edit now?

  Hi Neil,

  Drag / drop may not work if you don't have any enabl; e source patch or did not target the track for the same thing.

  https://helpx.Adobe.com/Premiere-Pro/using/source-patching-track-targetting.html

  Vinay

• After the last updates of windows have problems with start up and now drivers

  Hello

  After the last updates of windows have problems with start up and now drivers. I get an error code 21 when I try to install the drivers AMD apparently missing.

  May 14, last night I had several (automatically) downloaded windows update

  Today, I was unable to boot my computer with Windows - tried the disk check, start checks etc, and eventually had to use System Restore (for help before the critical update to restore).

  Perfection, everything works, but knowing that windows will attempt to redo an automatic update, tried to check online - no one seemed to have a problem and (naivly) thinking I could always do another restore of the system, I rebooted again.

  Same thing worse. Could not do a sys restore either just before restarting or last night. Chose a date earlier (last week) but then lost the USB drivers and pilots display. Downloaded updated but refuses to let my AMD driver install Windows I have a very unpleasant screen... and I must now stop the installation of this update "critical."

  Would appreciate advice how do my installed display driver or whether anyone else has problems following this update

  Thank you

  Hi Jane,

  You have a disk to install Windows 7 with you?

  I suggest you to check the event viewer for error details report.

  Open event viewer.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

• How can I swap buttons of the mouse on a--no Microsoft Mouse with Microsoft Mouse and keyboard Center? (I have a Microsoft keyboard).

  I did a new install of Windows 8 on my Dell desktop computer that has a keyboard, Microsoft Natural 4000 and Dell's USB mouse.  Windows 8 Microsoft keyboard recognized and automatically downloaded and installed Microsoft Mouse and keyboard Center version 2.0.162.0.  However, I'm a lefty mouser and installation of the MS mouse & keyboard Center back on my right handed mouse buttons.  (I went to control panel |) Mouse and swapped buttons immediately after installation.)  When I went into the control panel. Applet of the mouse and the keyboard and mouse Center had resumed the first tab of the control panel mouse properties, stating "click here to change the settings for the Microsoft mouse.  This is the tab where the "Swap mouse buttons" is usually.  When the mouse and keyboard Center is launched, it offers only options for the keyboard.  Do I have to abandon my Microsoft keyboard or purchase functions go a Microsoft mouse to get exchanged my mouse buttons?

  How to swap the mouse buttons on my non-Microsoft with Microsoft Mouse and keyboard Manager installed mouse?

  Thank you

  C.C.

  To get all the benefits of Mrs Maes & Bishop, you can buy a MS mouse is compatilble with the Manager, MS software is for devices of Ms and it is unlikely that MS will change their software to accommodate mice made by other sources.

  If you want to keep the Dell mouse, you will need to disable MS M & K Bishop.