Need help fixing slow tool shape

Similar Questions

• My Vista computer has a virus and it is slow, I need help fixing it

  my computer got a virus a sound running slw I need help fixing it

  Hello

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• I need help fixing error 340... only, I get this message when I try to send an email... there at - there a way to fix this error free?

  I need help fixing error 340... only, I get this message when I try to send an email... is possible to fix this for free?

  You must ask Yahoo.
   
  Yahoo support
  http://help.Yahoo.com/l/us/Yahoo/helpcentral/ 

• Need help. My tool Panel disappeared and I need to get it back

  Need help. My tool Panel disappeared and I need it back.

  Window > tools

• WMI does not work correctly. I need help fixing mine

  I have a program that has access to my WMI to keep my access key activated and it does not work.  I have windows 7 64 bit and need help please.

  Hi Youtoo54,

  ·         What is the name of the program that you are facing this problem with?

  ·         You receive an error message or error code?

  ·         You did changes to the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: Try the SFC (System File Checker) scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

   

  Method 2: You try to perform the following troubleshooting steps and check if it helps:

  Check the State of the WMI service start-up

  1. click on start, type "services.msc" (without the quotes) in the search box and press ENTER.

  2. double-click on the service "Windows Management Infrastructure.

  3. make sure that the startup type was set to "Automatic" and the service status is "started", otherwise, if it please change start type and click on the Start button to activate this service.

  Method 3: If the problem persists, let us register the WMI components.

  Save the WMI components

  a. click the Start button, and then in the "Search" box, type CMD.

  b. in the list above, under 'Programs', then right-click on CMD which appears above and choose 'run as administrator' and click 'continue'.

  c. in the open window, type the following commands one by one and press enter after each command:

  CD /d %windir%\system32\wbem

  for %i in (*.dll) do RegSvr32 %I s

  for %i in (*.exe) do %i/regserver

  Note: The WMI Tester window may appear, it is normal, and we can move forward to close.

  d. restart the computer and check if you receive errors.

  Let us know if that helps.

• I need help, fixed an error of update updated 11.0.14 installation. Fatal error during installation.

  I need help for a mistake that I keep trying to do an update. Update is 11.0.14 and the installation error 1603 Fatal error message

  Error 1603: A fatal error occurred during the installation of Adobe Creative Suite

• Need help to transform a shape layer in a layer mask blur adjustment

  I understand how to do a blur mask on the image adjustment layer, so it blurs the images below, which is essentially what I'm trying to do, but in this case, I already have the shape layer (or rather imported from Illustrator > converted to a shape layer) and is in a nested composition.

  First of all, is it possible to blur the images of a composition if the adjustment layer is nested in a composition of the child, or the adjustment layer must be in the parent publication; the composition is blurry?

  Second of all, how we simply take a form that they have already created and use that for a mask, in this case, a mask that will blur everything below?

  Forum thanks!

  There are a few things that are not effective in your workflow and your approach.

  Lets talk first about the Illustrator files in After Effects. Firstly, absolutely the only reason you would ever convert a layer to illustrator in a form would be to use animator tools found in the add menu at the top of the shape layer properties in the timeline panel or to animate a Bézier path on this layer. There is no other advantage in converting a vector layer to a shape. NONE.

  Second, if you want to hide an adjustment layer then you can draw the mask directly on the adjustment layer or any layer with transparency, including an illustrator layer, layer photoshop, any hidden layer or layer shape directly on top of the adjustment layer and use this layer with transparency as an Alpha or Alpha reverse cache by approach to the adjustment layer.

  You can use the luminance values of any layer that has no transparency that a luma or reversed hides by luma approach. The white areas offer transparency with luma standard. IOW, if you have a radial with white in the middle and black gradient on the edge and you use a luma matte and white will be transparent on the layer below.

  Standard caches only affects the layer immediately below the source.

  Adjustment effect layers each layer directly under the adjustment layer. Masks and caches can be used to control the effects of an adjustment layer.

  You can also use masks on any layer to control the effect added to this layer if you have a recent version of AE. You will find the option under options to Compositing.

  If you have any layer with transparency or the strong luminance values, you can use Auto Trace to generate a cache for this layer based on transparency or luminance. Any way shape mask or Bézier path can be copied and pasted to another layer.

  We will take your last question now. You should be able to answer. To use any shape you created as a mask, you use this layer as a track matte.

  We will change that approach a bit and assume that you have created a shape layer by using the pen tool or converted an Illustrator layer to a shape. You have a path that you can be found by selecting the shape layer and by pressing twice the key U. find the path you want to copy, rotate options path to reveal animation controls and to set a single keyframe and then copy (Ctrl/Cmnd + c). Even of the forms created with parametric tools like star, ellipse, rectangle can be converted into a path by right-clicking the shape and selecting convert to paths. When you have copied the path put you on the layer where you want to paste the path, select the pen tool to begin to draw a mask, click anywhere on the layer and paste it (ctrl/cmnd + v) and that you have created the mask. This works for forms and masks on any layer.

  Here's a bet to keep everything by copying and pasting masks. The size and position of a path is calculated from the center of the layer and has no relationship to scaling, rotating, or the position of the layer. If you drew a mask on a layer that is resized to 50% and moved to the top right of the comp and rotated 45 ° and then paste this path to any other layer you will NOT get a path in the same position and the same size as the layer sampled in the model. You end up with a path that match if every sampled layer transformation properties have been reset and the layer was at the center of the model and the rotation and scale were normal. You must pay attention to this issue by copying and pasting traces of Bézier.

  I missed a question type. If you nest or call a layer previously and there is an adjustment layer in the main computer it will affect all layers below. If you dial before a layer and a top adjustment layer then only layers in the nested model will be influenced by the adjustment layer.  I replied before but wanted to make sure.

  BE very careful when you watch YouTube tutorials on workflow because a growing number of them is bad teaching techniques and pointing you to the bottom of the dead-end alleys. Make sure you vet your training.

  If you have any other questions the best place to find good community resources is to type a word in the search help field in the upper right of the AE. For example, if you typed layer adjustment or masks, you would find a lot of very good advice on how to use these features.

• Need help.  Slow Safari after updating the recent Mac operating system. How can we speed it up?

  Updated Mac operating system made last night and now our analyses of Safari.  What can we do to speed up browsing?

  First of all, read the 100 or so other threads asking more or less the same thing.

  Do you have? Its work to type again and again and...

  the Cap is not slow. You need to know what he's slowing down. Assume the softwrae part 3

• Need help fixing windows update 80073712 error code.

  Whenever I try to check for any update I get error code 80073712. I am running windows vista as my operating system. Is there anyway that I can fix this?

  http://support.Microsoft.com/kb/957310

  Above Microsoft link has 3 methods ot try to fix your error Code >

  Method 1: Run (Checksur.exe) system update readiness tool

  1. Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.

     For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:

     947821 (http://support.microsoft.com/kb/947821/) Description of the update readiness tool for Windows Vista system
  2. Try to install updates again.

  Note After running the tool, the Checksur.log file is stored in the following location:

  %SystemRoot%\Logs\CBS

  In a default installation of Windows Vista, SystemRoot is the Windows directory.

  If this method does not resolve the problem, go to method 2.

  Back to top

  Method 2: Install Windows Vista Service Pack 1 if you have not yet installed Windows Vista Service Pack 1 (SP1), visit the Microsoft Download Center and then download and install Service Pack 1. To do this, follow these steps:

  1. Quit all programs, and then click on the following link:
     http://www.Microsoft.com/downloads/details.aspx?FamilyId=f559842a-9c9b-4579-b64a-09146a0ba746&displaylang=en (http://www.microsoft.com/downloads/details.aspx?FamilyID=f559842a-9c9b-4579-b64a-09146a0ba746&DisplayLang=en)

     Note Click the option to download on the download page, click Save, and then save the download to your desktop. When the download process is complete, click run to install the SP1.

  2. Restart the computer.
  3. Try to download the updates again.

  If you can't always install updates, go to method 3.

  Back to top

  Method 3: Perform a repair of Windows Vista installation when you perform a repair installation, which restores the current installation of Windows Vista to the version on the installation DVD. This requires you to reinstall all updates that do not appear in this version of Windows Vista.

  To perform a repair of Windows Vista installation, follow these steps:

  1. Restart the computer.
  2. Insert the Windows Vista DVD into the DVD drive of the computer.

     Note If Windows does not automatically detect the DVD, click Start, type : \setup.exe in the Search box, and then click configuration in the list programs. Then click on install now.

  3. Click connect to get the latest updates for installation (recommended).
  4. Insert the product key if you are prompted to do so.
  5. Click to accept the Microsoft software license agreement.
  6. On the screen which type of installation you want , click upgrade.
  7. Once the installation is complete, restart the computer, and then try again to install updates.

  Mick Murphy - Microsoft partner

• All USB ports not working doesn't no causing of mouse and keyboard doesn't work either (considered the source of the problem). Need help fixing without using the mouse or the keyboard.

  None of my usb ports work, and I can't get my mouse and keyboard to respond.  The computer will start, but none of the usb ports work, and I don't have the use of a mouse or a keyboard works through all the patches.  Help!

  I have PS/2 ports, but no mouse PS/2 or a keyboard... did not have those last few decades and don't know anyone who has these features more

  $6.36 (free delivery if you have Amazon Prime, otherwise on $11 including shipping): http://www.amazon.com/V7-Standard-PS-Keyboard-KC0A2-4N6P/dp/B007R9YV0C/ref=sr_1_1?ie=UTF8&qid=1372529682&sr=8-1&keywords=ps%2F2+keyboard

  during boot, or perhaps in Safe Mode

  Assuming that your keyboard works during boot (and it should; trying to tap F8 to access Advanced Boot Options Menu), probably the simplest method would be to make a Hiren Boot CD, boot from it and use one of the many included tools.  I have not experienced with your particular situation, so I can not tell you what tools will be or will work for you, but my guess is that USBDeView might work.

  Description: http://www.hiren.info/pages/bootcd

  Download and burn (copied from ElderL):

  Download the Hiren ISO here (download important enough but worth it).

  http://www.hirensbootcd.org/download/

  I like to use ImgBurn to create a bootable ISO CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask Toolbar (ever).

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  Thanks for all the help. Seems that there is no easy 'reset' for bad hardware configurations.

  However, I dug to the bottom of my Lac 'tech' and found a USB-to-PS/2 adapter, which allowed me to use the USB mouse into the PS/2 port and reactivate my USB ports.

  All is well now.

  Thank you all for your answers!

  Kind regards!

• Need help fixing a non-responsive Application Manager.

  CC apps running and updated very well so far. I get a message telling me that the Application Manager is missing or damaged and to download a new copy of Application Manager. When I try to start a new download of the App Manager, I get the wheel of progress and it works for hours. I tried the suggested fix OOBE, but he did nothing and will continue to receive the wheel of progress without end. I looked in the forums without success. Anyone else has this problem and had a successful fix?

  Appreciate help or direction...

  Thank you

  Dave

  Hi Dave,.

  For Windows, you can see the steps below:

  1. Please follow the steps 1 and 2 listed in Solution 2 in the link error: "unable to install". Creative Office Cloud
  2. Open the link Adobe - Adobe Application Manager: For Windows: Adobe Application Manager and download and install Adobe Application Manager
  3. Launch Adobe Application Manager in the list of programs (Start--> all programs). It will start the update process and gets update for Creative Cloud desktop application.
  4. Connect to cloud creative and launch applications CC and check.

  Hope this will help you.

  Kind regards

  Hervé Khare

• Need help with the tool pen

  Hello, I drew something. I need to draw a line using the Tool Shed connected to a point I have already made. How can I continue with this point again.

  Additionally, sometimes the tool join does not. Why is this?

  N ° you cannot connect a closed to an open path path. You can just start at exactly the same point.

• Need help fixing MySQL Database connection with Dreamweaver CS5

  I need to find a way to fix this error:

  "Your PHP server does not have the MySQL module loaded or you cannot use the mysql_ connect functions (p)."

  The site that I am doing this is usuing wchosting services gabessdsp.wchosting.co.cc. I can't connect to the databases that I do and I auadrouple all my verified information. How can I know how to fix this? Everywhere wherever I look it tells me to change something in the php.ini file, but I'm not running even the server. They say that they do not allow remote connections to phpmyadmin and this could be the cause of my problem?

  According to the headers on the url you gave the server runs MySQL PHP 5.2 libraries were not included.
  It would be necessary to contact the administrator of the host, to see if the libraries can be installed or PHP upgraded to 5.3.
  HTH

  -Rb

• Need help to create the shape that people have to go to a page

  Hello

  I am trying to create a form that people would have to complete and submit to access a specific page. The info they need to go to an e-mail address. Does anyone have the simplest solution for this? It should not be stored in a database simply go to an e-mail. Any help would be appreciated. I am not great with the backend of things.

  Thanks for getting back to me. What I have is a pricing page. The feedback form is so that we can see who views or interested in the services. We don't want people who fill out this form in order to see it. I created simple contact forms that are sent to an email and directed to another page. The problem I have is trying to find a way where I hope that if the same person comes back they will not have to fill out the form again. I don't know if they will fill and create a login/username that could be a possible solution, but I try to make it simple. I'm just starting to learn PHP/XML (which I copied from other sources) and wrote my own. Maybe create a cookie which is verified once the page is loaded? I don't know how do either if... I'm a front-end "designer" and much of this is Greek to me.

• Neede help about the tool clone of photoshop

  I'm quite new to photoshop and I have a strange problem, I don't even know what's a problem or simply a default behavior...
  When I use the clone tool, I press alt and select the area to clone... but when I release the ALT key, a plu marker appears with a circle used to print the copied box, below. So whenever I click to apply the copied part, another area just below it is copied again. Then when I drag the cursor along the image, each movement creates a new copy. I can't paste a unique space in other parts...
  So can someone please tell me how to get rid of this extra slider...

  Once again, what exactly did you do and what did you expect to happen? because if you have clicked and dragged into this image with him 3 times then everything works as advertised. Here's how the Clone Stamp tool should work: http://help.adobe.com/en_US/Photoshop/11.0/WSfd1234e1c4b69f30ea53e41001031ab64-760aa.html